Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.4 LAccepted-AOC 0 BEECHPARA DANGAURA MAHENDRAGARH MANENDRAGARH CHIRMIRI BHARATPUR CHHATTISGARH 497442 | KOREA | CHHATTISGARH | 497442 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹44.9 L+₹1.0 L (2.35%)Rejected-Finance | L2 | Rejected-Finance Rejected being L2 | |
| 3 | L3₹48.7 L+₹4.9 L (11.1%)Rejected-Finance MARYADA 111 SHIKARGARH KANHAIYA NAGAR JODHPUR 342001 | JODHPUR | RAJASTHAN | 342001 | L3 | Rejected-Finance Rejected being L3 | |
| 4 | L4₹53.5 L+₹9.6 L (22.0%)Rejected-Finance | L4 | Rejected-Finance Rejected being L4 |
Tender Value
Refer Docs
EMD Value
₹1.3 L
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (ARMY) CENTRAL JODHPUR
GE (ARMY) CENTRAL MULTAN LINE ARMY AREA JODHPUR
PROV OF SHED NEAR BLDG NO. P I AT LANCER LINES SPL REPAIR TO BLDG NO 1244 HQ COY COMPLEX AREN PROV OF STEEL PLATE RACKS FOR OR MD ACCN BLOCK BLDG NO P 1046 P 1047 P 1055 P 1056 P 998 AND P 999 (9118/E8)
2022_MES_533462_1
GE/J/A OF 2022-23 (9118/E8)
Open Tender
Civil Works
Item Rate
180 days
GE (ARMY) CENTRAL MULTAN LINE ARMY AREA JODHPUR
AND ADDN/ ALTN OF PARKING SHED NEAR BLDG NO P-223/1 UNDER AGE B/R-I OF GE (ARMY) CENTRAL JODHPUR (9118/E8)
6 documents required · 6 mandatory
₹500
GE (ARMY) CENTRAL JODHPUR
₹1.3 L
16 Aug 2022
24 Jun 2022
28 Jul 2022
24 Jun 2022
26 Jul 2022
8 Jul 2022
Amount
Note:- (i) All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ Bidders are required to quote their rates accordingly. (ii) Makes of materials will be approved by GE in writing before commencement of work.
B/R ITEMS Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level), complete all as directed.
M&L 50mm thick PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection or similar places, without using extra cement, complete all as specified and as directed.
S&F machine made precast cement concrete Kurb stone blocks using Cement concrete 1:3:6 type C-2 (using 20mm graded crushed stone aggregate), complete all as specified and as directed by Engr-in-Charge.
Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as directed.
M&L for cutting in to old masonry to form toothings for bonding in new brick or stone work including making good in cement mortar 1:6, complete all as specified and as directed.
M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and as directed.
All as per item No 7.00 above but except stone, complete all as specified and as directed.
M&L PCC solid building blocks 10 cm thick of PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) and set in cement mortar (1:6), complete all as specified and as directed.
Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete to squared rubble walling, regular coursed, Jodhpur type, complete all as specified and as directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as directed.
M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in flooring etc, complete all as specified and as directed.
M&L for 15mm thick screed bed or bedding layer in CM 1:6 floor finished even & rough to reciever tiling/floor finish, complete all as specified and as directed.
M&L for non-skid coloured ceremic tiles (Premium quality) joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade.including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. Make : Kajaria/ Somany/ Orientbell as approved by GE.
All as per item No. 14.00 above but skirting including 10 mm thick rendering over cement mortar 1:4, complete all as specified and as directed. Make : Kajaria/ Somany/ Orientbell as approved by GE.
M&L non skid ceramic colour joint free tiles (Premium quality) 6 to 7 mm thick of size area exc 0.11Sqm but nexc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and as directed. Make : Kajaria/ Somany/ Orientbell as approved by GE.
M&L for glazed colour ceramic tiles (Premium quality) of size 300x450x7mm, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles complete (Highlighter pattern), complete all as specified and as directed. Make : Kajaria/ Somany/ Orientbell as approved by GE.
M&L for 10mm thick rendering in CM 1:4 over stone masonary surfaces including finishing the surface fair & rough to receive tiling etc., complete all as specified and as directed.
Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc., complete all as directed.
M&L Rendering 10 mm thick CM 1:3 on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth, complete all as specified and as directed.
M&L Rendering 5 mm thick CM 1:3 on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth, complete all as specified and as directed.
M&L for 15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface, complete all as specified and as directed.
Racking out joints/pointing to square rubble masonry Jodhpur types regular courseds built in cement mortar, complete all as specified and as directed.
M&L for Keyed pointing to square rubble masonry Jodhpur type, regular course in CM 1:3, complete all as specified and as directed.
M&L preperartion of newly plastered surfaces on wall and applying two coats of wall care putty with fair finished and even surface and applying two coats of oil bound distemper, complete all as specified and as directed.
M&L for complete removal of existing distempered surfaces of walls and applying two coats of oil emulsion Paint of white shade or other approved shade over two coat of (birla white) putty on plastered surface, complete all as specified and as directed.
M&L three coats of white wash on newly plastered surface of wall including preparation of surfaces, complete all as specified and as directed.
M&L three coats of white wash on newly plastered surface of ceiling including preparation of surfaces, complete all as specified and as directed.
M&L one coat of white wash on old surface of wall inculding preparation of surface, complete all as specified and as directed.
M&L one coat of white wash on old surface of ceiling including preparation of surface, complete all as specified and as directed.
M&L two coats of cement based paint on newly plastered/ unplastered surface of wall including preparation and one coat of chalk white of surfaces, complete all as specified and as directed.
M&L one coat of cement base paint on old surfaces including preparation, complete all as specified and as directed.
M&L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces, complete all as specified and as directed.
M&L applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces, complete all as specified and as directed.
Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame, complete all as directed.
Taking down chowkhats or frame exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.
Taking down shutter of any description, exc 1 Sqm but not exc 2 Sqm each, complete all as directed.
Taking down shutter of any description, exc 1 Sqm but not exc 2 Sqm re-fixing in the same opening after necessary repair like easing etc., complete all as specified and as directed.
M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors and frame ; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 framed work as in door or gates ornamental type of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to br prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering runing rails and guides) including forging item (tersule etc) and hanging also fastening and fixing, complete all as specified and as directed.
M&L for mild steel framed work as in brackets etc for cooler stands etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc., complete all as specified and as directed.
M&L for mild steel frame work as in stairs ,hand rails half round or other stock section or section or core for wooden hand rail straidgt portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hid ties for foof including securing bolts post and struts in fencing including securing bolts post and struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillet for necessary drilling boltinh or riveting etc and similar work confirming to Fe 410-0 or fe 310-0, complete all as specified and as directed.
M&L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25mm thick bent to shape incl two coats of synnthetic enamel paint on internal surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc., complete all as specified and as directed.
S&F 35mm thick, factory made, second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-1991 section 8 clause 8.24 (a), complete all as specified and as directed.
S&F 35mm thick, Flush shutters, solid core construction, with block board core and plywood face panels,with liminated both face commercial type on both sides, complete all as specified and as directed.
S&F of 35mm thick 2nd class Hard wood paneled door shutter factory made (two panel) with lock rail andpanel of 9mm thick BWP commercial ply wood, the size of rail and stile is as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated, complete all as specified and as directed.
S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.
M&L for solid PVC door frame of size 50x47mm made out of 5mm thick PVC sheet reinforced with MS square tube, complete all as specified and as directed.
S&F butt hinges 100 mm long, extruded aluminium alloy with mild steel hinge pin anodised type - 21 for PVC door, complete all as specified and as directed.
M&L applying one coat of synthetic enamel paint on old painted surface wooden surfaces of any description over 10 cm width or girth including preparation of surfaces, complete all as specified and as directed.
M&L applying one coat of synthetic enamel paint on old steel surface of any description over 10 cm width or girth including preparation of surfaces, complete all as specified and as directed.
Taking down steel window/ventilator, complete all as directed.
S&F factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer (with or without cooler opening), complete all as specified and as directed by Engr-in-charge)
S&F factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer (with or without cooler opening), complete all as specified and as directed by Engr-in-charge)
S&F factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer, complete all as specified and as directed.
S&F Factory made box type steel ventilator without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer, complete all as specified and as directed.
S&F of aluminium anodized,tower bolt 200mm long, complete all as specified and as directed.
S&F aluminum anodised handle extruded section of size 150mm long, complete all as specified and as directed.
S&F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long, complete all as specified and as directed.
S&F of mild steel butt hinges 100mm size, complete all as specified and as directed.
S&F 100mm size single action door spring hinge, complete all as specified and as directed.
S&F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 140mm long, complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed.
S&F of 4 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty, complete all as specified and as directed.
S&F for 3mm thick plain glass ordinary quality & glazing, complete all as specified and as directed.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm, complete all as specified and as directed.
S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm with necessary fitting on steel/ wooden surface, complete all as specified and as directed.
M&L for PCC 1:2:4 type B-1 Mix (using 20mm graded crushed stone aggregate) as in hold fast iron fixing,coping, chamfered edges including necessary form work, complete all as specified and as directed.
S&F flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165 fixed with welding and necessary item, complete all as specified and as directed.
S&F fancy type stainless steel, decorative 25mm curtain rod with fixing brackets, knob etc., as in repairs, complete all as specified and as directed.
S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats (Min weight 300 gms), complete all as specified and as directed.
S&F in repair soap dish of PTMT fixed with screws, complete all as specified and as directed.
S&F in repair PTMT towel rail 450mm long fiexd to wall with chromium plated brass screws, complete all as specified and as directed. Make : Jaquar Cat No. CAN-1111BNM or equivalent in Kohler/ Cera as approved by GE.
S&F as in repairs vitreous china wash down water closet Europion Type pedestal pattern with seat & cover complete incl fixing of flush pipe etc., complete all as specified and as directed. Make : Parryware/ Hindware/ Cera as approved by GE.
S&F Vitreous china wash hand basin, white, flat back, size 550 x 400 mm, with and including painted new brackets, waste coupling, waste pipe of 32 mm dia low density polythelene (LDPE) pipes of pressure rating 4 Kgf/sqcm, complete all as specified and as directed. Make : Hindware/ Parryware/ Cera as approved by GE.
Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore, complete all as directed.
Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete all as directed.
S&F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in wall and fixed with MS clamp, complete all as specified and as directed by Engr-in-Charge
S&F PVC SWR pipes single socketed in any length with rubber rings joints laid in trenches or in floors 110mm, complete all as specified and as directed.
S&F PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors 75mm, complete all as specified and as directed.
All as per item No. 80.00 above but fixed in wall, complete all as specified and as directed.
S&F PVC (SWR) branch pieces single socketed 'Y' equal or unequal 110mm, complete all as specified and as directed.
S&F PVC (SWR) bends any radius 110mm, complete all as specified and as directed.
S&F PVC (SWR) bends 75mm dia with oval acess door, complete all as specified and as directed.
S&F PVC SWR vent cowl 110mm, complete all as specified and as directed.
S&F PVC SWR vent cowl 75mm, complete all as specified and as directed.
S&F 75 mm PVC SWR junction (T) with acces door equal or unequal, complete all as specified and as directed.
S&F 110mm PVC SWR junction (T) with acces door equal or unequal, complete all as specified and as directed.
S&F in repair chromium plated 15mm dia pillar cock, long neck with aerator, complete all as specified and as directed. Make : Jaquar Cat No. CQT-23021B or equivalent in Kohler/ Cera as approved by GE.
S&F as in repairs 15 mm dia angular stop cock with chromium plated long thread with flange, complete all as specified and as directed. Make : Jaquar Cat No. QQT 7053 or equivalent in Kohler/ Cera as approved by GE.
S&F as in repairs 15mm dia two way angular stop cock with chromium plated long thread with flange, complete all as specified and as directed. Make : Jaquar/ Kohler/ Cera as approved by GE.
S&F in repair Bidet spray (Health faucet) with 1 meter PVC tube and holde, complete all as specified and as directed. Make : Jaquar Cat No. ALD-573 or equivalent in Kohler/ Cera as approved by GE.
S&F as in repairs of 15 mm dia bib, cock long body with flange with chromium plated fixed with iron pipe, complete all as specified and as directed. Make : Jaquar Cat No. CQT-23047 or equivalent in Kohler/ Cera as approved by GE.
S&F low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and includign PVC connection, complete all as specified and as directed. Make : Parryware/ Hindware as approved by GE.
Dismantling water tanks of capacity exc 250 ltrs but not exc 500 ltrs and removing to store, complete all as directed.
S&F 1000 Ltr cap rotational moulded polythene water storage tank triple layer (white colour) (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I including tank lid cover complete with fixing arrangement, complete all as specified and as directed. Make : Sintex/ Rotex/ Polycon as approved by GE.
S&F in repair 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed.
M&L 50mm thich PCC 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregate) for water tank plinth, complete all as specified and as directed.
Demiolition of reinforced cement concrete of as staircase, landing, chajjas and similar suspended work of any description and any position not otherwise, complete all as directed.
M&L for Providing precast RCC using Type B-1 1:2:4 (using 20mm graded crushed stoe aggregate) as in cover slab for man hloes set in CM 1:6, complete all as specified and as directed.
M&L sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:6 thickness of slab 5cm, complete all as specified and as directed.
"Supply only" Integral water proofing compund (ISI Marked), complete all as specified and as directed.
Taking down or up steel tubing and connection including cleaning for refixing or removal to store of following dia, complete all as specified and as directed. (a) 25 mm dia
(b) 20 mm dia
(c ) 15 mm dia
"Refixing" old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), complete all as specified and as directed. (a) 25 mm dia
(b) 20 mm dia
(c ) 15 mm dia
S&F GI of water tubing, medium grade, galvanized, with all fittings fixed to wall, complete all as specified and as directed. (a) 25 mm dia,
(b) 20 mm dia
(c ) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.
Demolition of reinforced cement concrete of any description for roof,colums ,beam of any type etc., complete all as directed.
Use and waste of formwork to sides and soffits of slabs not exc. 200mm thick and similar works fair finished surfaces of concrete, complete all as specified and as directed.
From work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide with fair finished surfaces, complete all as specified and as directed.
Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces, complete all as specified and as directed.
M&L RCC design mix M-25 as in slab supported on wall, roof slab, chijja and in shelve etc., complete all as specified and as directed.
M&L RCC Design M-25 Mix as in beam, roof beam, cantilevers, lintel beam, etc., complete all as specified and as directed.
S&F TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and as directed.
-Ditto- all as per item No. 118.00 above but 6 to 8 mm dia in stirrups, spacers and binders, complete all as specified and as directed.
-Ditto- all as per item No. 118.00 above but 5 dia and over upto and including 10 mm dia in stirrups , spacers and binders, complete all as specified and as directed.
M&L for roof treatment in the following stages, complete all as specified and as directed :- (a) first Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately) (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 2.25Kg/Sqm (e) Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course :40mm thick PCC 1:2:4 padding, well compacted (using 20mm graded crushed stone aggreegate) with groovs shall not be exceeding 1.40 Sqm
Repair to steel window including taking down, replacement of unserviceable hinging device box type , handles, making them in serviceable condition and re-fixing in same opening including making soffits and jambs in CM 1:4 and old surface steel paiting etc., complete all as specified and as directed by Engr-in-Charge.
RCC ( 1:1.5: 3) type B-1 (using 20mm graded crushed stone aggregate) as in slab supported on walls, beams, columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed.
S&F in repair stainless steel kitchen plate rack of size 900mm x 900mm x 300mm made out of 1 mm thick stainless steel sheet, complete all as specified and as directed. Make : Bluestar/ Nirali/ Jayna as approved by GE.
Excavating in post holes each not exc 0.5 cum , getting out in soft loose soil ,returning filling in and ramming earth or broken rubble mixed with earth around, in layers nt exc 25cm ,watering and removing surplus soil to a distance not exc 50m and making good surface, complete all as specified and as directed.
M&L for cement concrete in foundations ,filling and mass concrete type C-2 1:3:6 (using 40mm graded crushed stone aggregrate) as inpost hole, complete all as specified and as directed.
S&F steel work in tubular steel trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St- 240, complete all as specified and as directed.
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing including distance ieces, cleats etc., complete all as specified and as directed.
S&F plates (plain or /mds plate chequered) channels square cut or notched (ordinary and counter sunk) forming holes with riveted bolted or welding attachement, complete all as specified and as directed.
S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws, complete all as specified and as directed.
M&L for Cement concretein foundations,filling and massconcrete PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and as directed.
M&L for Providing cement concrete Type B-1 1:2:4 (using 20mm graded crushe stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges and surface finished of floors, complete all as specified and as directed.
M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wall cladding and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 10mmthick rendering in CM 1:4, complete all as specified and as directed.
Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed.
S&F 2mm thick fiber glass reinforced translucent plain sheeting fixed with iron gate with screws, complete all as specified and as directed.
Surface excavation not exc 30cm deep & averaging 15cm deep getting out in soft/loose soil, complete all as specified and as directed.
Excavation in trenches not exc 1.5 m wide & not exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and as directed.
Returning,filling in,including spreading,levelling,watering and well ramming in layers not exc 25 cm each layer in hard/dense soil, complete all as specified and as directed.
Removing excavated soil not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as directed.
M&L hardcore of broken stone or boulders of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed.
Extra over for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling,Jodhpur type, brought upto courses, complete all as specified and as directed.
S&F structural steel rolled sections as in main and cross beams confirming to Fe 410-W (Gde-E-250) quality-A, complete all as specified and as directed.
M&L for Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted cement mortar 1:3, complete all as specified and as directed.
Sand filling under floors including watering and consolidation in layers not exc 25cm thick, complete all as specified and as directed.
M&L for Non-skid Coloured Ceramic tiles (Premium quality) 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer in CM1:6, complete all as specified and as directed. Make : Kajaria/ Somany/ Orient bell as approved by GE.
M&L for fabrication of louvered aluminum ventilators fabricated with anodized aluminum rectangular section weighing 0.55 Kg/m in frame & other section with deco grill of approved design & stainless steel wire cloth on the outer side of frame & trade pattern louvers with suitable mechanism for tilting /opening closing half portion & half bottom portion should be fixed with glass panes etc all as per sample kept in GE office & fixed in position, complete all as specified and as directed. (Note : Glass pane & stainless steel wire cloth shall be measured & paid separately)
S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of appertuer 1.40 mm fixed fixed with tinned tacks or galvanized wire staples, complete all as specified and as directed.
S&F for sheet glass of ordinary quality, 4mm thick, area of each pane not exceeding 0.5sqm and glazing with aluminium beading in aluminium frame, complete all as specified and as directed.
M&L for cutting chases in brick walls for concealed water tubing and making good to facing where required and pointing in position in CM(1:3), cutiing not exc 10 cm girth, complete all as specified and as directed.
S&F Bib tap,15mm bore, fancy type, brass chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed. Make : Jaquar Cat No. FLR-5047N or equivalent in Kohler/ Cera as approved by GE.
S&F Angle valve,15mm bore, fancy type, brass chromium plated, concealed type, with long shank and cup, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed.
PVC connection, 15mm size, with PTMT nuts, of length 450 mm long including taking down of existing old pipe, complete all as specified and as directed.
S&F Vitreous china urinal, bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), white,complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement , suitable PVC waste pipe with brass unions, including making all connections to existing connections and fixed, complete all as specified and as directed. Make : Parryware/ Hindware/ Cera as approved by GE.
M&L for bedding to drain pipes 150mm dia including packing under, and haunching in PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) against the side of SWG after they are laid and tested, complete all as specified and as directed.
M&L for 150 mm bore SWG drain pipe, of grade 'A' laid in trenches and jointed in CM 1:1, complete all as specified and directed, including testing etc., complete all as specified and as directed.
M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in surfaces channel and drain of man holes finishing surfaces even and smooth, complete all as specified and as directed.
E/M ITEMS Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc., complete all as directed.
Point wiring complete with 1.5 sqmm, single core, multi stranded, copper conductor, PVC (FRLS), insulated, unsheathed cable, confirming to IS-694, 1100 volts grade, (ISI marked) (class V conductor), in and including PVC concealed conduit (MMS), (ISI marked) not less than 20mm, with accessories fixed on surface of wall/roof/ceiling etc and including sunken pressed steel terminal boxes in wall but including 3mm thick plastic laminated sheet top cover (ISI marked) hylem sheet and 1.50 sqmm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for :- (a) One light point controlled by one, one way switch
(b) One fan /Exhaust fan, point controlled by one way switch, complete all as specified and as directed.
(c) One socket outlet 3 pin 6 Amps on same board, complete all as specified and as directed.
(d) One socket outlet 3 pin 6 Amp on independent board, complete all as specified and as directed.
All as per item No. 158.00 above but with 2.5 Sqmm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board, complete all as specified and as directed.
S&F switch flush type single pole one way 6 Amp (ISI Marked), complete all as specified and as directed. Make : Legrand/ Schneider/ Crabtree
S&F switch flush type single pole one way 16 Amp (ISI Marked), complete all as specified and as directed. Make : Legrand/ Schneider/ Crabtree
S&F socket out let , 5 pin , 6 Amp FT, complete all as specified and as directed. Make : Legrand/ Schneider/ Crabtree
S&F socket out let , 6 pin ,16 Amp FT (ISI Marked), complete all as specified and as directed. Make : Legrand/ Schneider/ Crabtree
S&F socketed stepped type electonic fan regulator flush type, (ISI Marked), complete all as specified and as directed. Make : Legrand/ Schneider/ Crabtree
S&F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body, complete all as specified and as directed.
S&F LED light fitting 1 X 20/22 watt (4 feet) complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and as directed. Make : Philips/ Bajaj/ CG
S&F Bldg security LED Light Luminaire of 25/45 Watts any make any size including GI pipe Med Grade 40 mm bracket of 1.5 m in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable, complete all as specified and as directed. Make : Philips/ Bajaj/ CG
S&F insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings including 9 watt LED Lamps (ISI Marked), complete all as specified and as directed.
Taking down and refixing and hanging only ceiling fan/ Exhaust fan and connectiong up includisng provison of cable from ceiling rose or connector to fan, complete all as directed.
M&L in repairs sub main wiring with 6.00 Sqmm single core multistrandred copper conductor PVC insulated FRLS and unsheathed cable passing through PVC concealed conduit and making good the distrurbed surface of wall including 6 Sqmm single core copper conductor cable PVC insulated and unsheathed cable as earth wire, complete all as specified and as directed. Note :- Two runs of cable 6 Sqmm and One run of 6 Sqmm shall be measured as unit length.
S&F Prewired distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 8 way, complete all as specified and as directed. Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface Make : Legrand/ABB/ Schneider
S&F Prewired distribution board in sheet metal Prewired when MCB to be used with 200 Amps rated copper bus bar Confirming to relevant IS TPN 4 way, complete all as specified and as directed. Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface, complete all as specified and as directed. Make : Legrand/ABB/ Schneider
S&F MCB Single pole 5 to 30 Amp, 10 KA 'C' series, (ISI Marked), complete all as specified and as directed.
S&F MCB Double pole 40 Amp, 10 KA 'C' series, (ISI Marked), complete all as specified and as directed.
S&F MCB SPN 63 Amp, 10 KA 'C' series, (ISI Marked), complete all as specified and as directed.
S&F MCB TPN 63 Amp, 10 KA 'C' series, (ISI Marked), complete all as specified and as directed.
Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion, complete all as specified and as directed. Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia.
Supply, laying, fixing or passing through pipe 1100volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire and overall PVC Sheathed 16 sq 4 core in service connection, complete all as specified and as directed. Make : Polycab/ Havells/ Finolex
Note:- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount
JB INFRA
M/S KAUTILYA GARG
Narendra General Suppliers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .