Restoration of Rain damages to LWSS Galore Budhwin under JSV Sub division Galore in Galore Nadaun Distt Hamirpur

Providing and fixing Male Contacts.

Providing and fixing Fe-Male Contacts.

Providing and fixing No volt coil

Providing and fixing of backlight sheet with adjusting hole

Repariring of OCB

Repariring of Panel Board wiring

Providing and fixing voltage meter

Providing and fixing ampere meter 0-60,0-100

Providing and fixing of suitable copper PVC insulated flat power 3 core copper cable conforming to BIS 1554(Part-I) 1998 of latet with approprite size including all other accessories such as flexible pipe solder nuts,bolts,cable gland etc. laid in pipe (carrying all three phases)complete in all leads and lifts to the entire satisfaction of Engineer in charge

Copper cable 2.50mm 2

Copper cable 4mm 3

Copper cable 6mm 4

Providing welding and fixing of MS flanges @ 5% to total joint, conforming to tableas per IS 6392-1971 (Last upto date ammendmendments ) with plain and G.I MSREW pipe in three (One inner and two outer)number of layers on both faces to make the joint leak proof ( The cost of providing and laying of GI pipes to be measured and paid for seperately). The welding of flanges should coform to IS 816-1969 with electrodes as per IS:814-1991 and required number of nuts and bolts conforming to IS 1364 including cost of gas cut sheet nuts and bolts. The thickness of gasket sheet not less tha 3.00 mm conforming to IS 2712-1998. The work shall be done to the entire satisfaction of Engineer in charge with in all leads aand lifts.

M.S Flanges 50mm dia table 17

M.S Flanges 65mm dia table 17

M.S Flanges 80mm dia table 17

Providing and supplying transformer oil

Providing and supplying of fuse wire of ISI marked & approved brand and manufacture complete with rubber coupling complete in all respect in all leads and lifts.

40 to 100 Amps

Providing and fixing star delta starter 40 HP

Providing and fixing star delta starter 25 HP

Providing and supplying cast iron sluice valve (with hand wheel )conforming to BIS 780-1986(Latest with upto date ammendments ) class PN1.00 OF 10.20Kg/Cm2 of Kirlosker/Leader/Kartar/Bir make of following dia including brass spindle) as per IS 2906 class-II complete (The cost of M.S flages to be measure and paid for separately) as per the entire satisfaction of Engineer in charge with all leads and lifts

50 mm dia

65 mm dia