REPAIR TO FENCING WALL, PATH HARD STANDING ETC IN DOMESTIC AREA AT AF STN UTARLAI

Amount

Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete including taking out embedded portion of concrete and making good distrubed ground complete all as specified and directed.

Excavation in post holes(or similar holes) in any type of soil each n exc 0.5 cum getting out, returning, filling in and ramming earth around, in layers n.exc 25 Cm, watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified.

M&L Cement concrete (1:2:4) type B2 (using 40 mm graded stone aggregate as in foundation of post, filling and mass concrete complete all as specified.

Dismantling existing broken /rusted barbed wire and removing from site complete all as specified and directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary welding, drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified. Note : Embedded portion in concrete of posts or struts shall be treated with tar or coal tar black paint and cost of same shall be included in the quoted rate of this item.

supply only chain link Mild Steel galvanised fencing of mesh size 75x75mm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type, any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed.

Supply & fixing MS round bar 10mm dia and over, cut to length and bend to shape required and confirming to Gde-I, IS-432 for line wire to chain link fencing etc complete all as specified.

S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed wire with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolt , including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed (each line wire to be measured).

S&F MS screw bolt (machine made) with hexagonal or square heads at one end and screwed the other end, and fitted with washers and one hexagonal or square nut n. exc 5cm long and 5 mm to 10mm dia of bolt complete all as specified

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrom primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) of any description and in any position complete all as specified.

M&L 100 mm thick Cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) as in hard standing laid in alternate bay complete all as specified.

Dismantling, stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed complete all as specified.

M&L Rubber moulded coloured (Machine pressed) precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over and including 25mm thick sand filling complete all as specified.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for rubber moulded coloured chequered cement concrete tiles, 25cmx25cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified.

M & L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) 100mm thick as in sub base complete all as specified.

M&L PCC 1:3:6 type C1 (using 20mm graded stone aggregates) as in cills, coping, coving etc including weathering slightly rounded or chamfered angles and throating complete all as specified and directed including demolition of detorieted coping of existing complete all as specified.

M&L for Pre-cast cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in Kerb stone and setting in cement mortar 1:6, complete all as specified.

Dismantling of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L Pre-cast cement concrete block masonry with solid blocks type C1 1:3:6 (20 mm graded stone aggregate), exc. 10 cm in width and set in cement mortar 1:6 complete all as specified.

M&L for rendering 15mm thick in cm 1:4 on stone masonry including finished even and smooth surfaces without using extra cement complete all as specified.

M&L for rendering 15mm thick in cm 1:4 on fair faces of brick work or concrete surface including finished even and smooth surfaces without using extra cement complete all as specified.

M&L for precast cement concrete jallies, 40mm thick in PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) & set in cm 1:4 including all moulding but excluding frame complete all as specified.

Excavation in trenches n exc 1.50 m wide and n exc 1.5 m in depth for foundation etc n.exc 10 Sqm on plan in soft/loose soil and getting out complete all as specified.

Removing excavated soil, exc 50 m but n exc 100 m and deposited where directed at a level n exc 1.50 m above the starting point complete all as specified.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted over a coat of white wash on walls complete all as specified and directed by engineer-in-charge

M&L for two coats of synthetic enamel paint over primed surface on newly surface of concrete of any description over 10cm girth or width, not otherwise described including preparation complete all as specified and directed by engineer-in-charge

M&L for one coat of synthetic enamel paint on old surface of concrete of any description over 10cm girth or width, not otherwise described including preparation and complete all as specified and directed by engineer-in-charge

Godara Construction and General Suppliers

M.D. CONSTRUCTION CO.

National Rewinding Works

Rasam Engg Co.