Spl Repair of old alumnium electrical wiring network and connected DBs at 6LU at AFS Chakeri Kanpur

Amount

Taking down old unserviceable/deteriorated batten/PVC conduit point wiring from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets, ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Peris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge.

M & L for concealed point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in with and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19/20 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.5 mm with earth dolly and plate with cover suitable for for fixing of modular switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:4) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge suitable for the following :- For one light, fan, call bell.

All as per item No 2 here-in-before but For one socket point controlled by one switch on independent board.

all as per item No 2 here-in-before but For one socket point controlled by one switch on same board.

All as per item No 2 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

S & F for modular switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified.

S & F for modular switch flush type single pole one way 15 Amps, 240 volts, white finish complete all as specified.

S & F for modular socket outlet 5 pin, 5 Amps flush type white finish complete all as specified.

S&F, for modular socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 V white finish complete all as specified.

S&F,for electronic , 2 module size, rotary, 5 speed step type regulator, 120-230 V white finish complete all as specified.

S&F, ceiling rose, surface backlite, 65 x 20 mm three terminal, ISI Marked .

S&F, in replacement, double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 Volt with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

All as per item No 12 here-in-before but 4 ways -do-.

S&F double door metallic sheet metal enclosure for DB when MCBs to be used TPN, 4 ways, 415Volts (horizontal type) with 200 Amps rated bus bar suitable for TPN MCB / 4 pole Isolator fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires complete all as directed.

S&F double door metallic sheet metal enclosure for DB when MCBs to be used TPN, 8 ways, 415Volts (vertical type) suitable for 125 Amps housing MCCB as main incomming fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires complete all as directed.

S&F double door metallic sheet metal enclosure for DB when MCBs to be used TPN, 4 ways, 415Volts (vertical type) suitable for 63 Amps housing MCCB as main incomming fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires complete all as directed.

Supply & fixing, testing and commissioning of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs fixed in repairs complete all as specified & directed. Make : Legrand /Schiender/ABB/Indo Asian

All as per item No 17 but of SP 40-63 Amps.

All as per item No 17 but of SPN 32 Amps. Make : Legrand / Schiender/ABB/ Indo Asian

All as per item No 17 but of SPN 40 / 63 Amps. Make : Legrand / Schiender/ABB / Indo Asian

All as per item No 17 but of TP 40 / 63 Amps. Make : Legrand / Schiender/ABB/ Indo Asian

M&L for MCCB 63 amp capecity , 4 pole, 16 KA, fixed thermal and magaenitc release complete with extended terminal to be fixed in 8 way TPN DB all as speciied and directed by Engineer in Charge

M&L for MCCB 125 amp capecity , 4 pole, 16 KA, fixed thermal and magaenitc release complete with extended terminal to be fixed in 8 way TPN DB all as speciied and directed by Engineer in Charge

S&F sheet metal enclosure , 20A single pole and neutral with a two pin and earth plug and socket complete in metal clad board with one single pole MCB 20 Amp fixed properly on in concealed position all as directed by Engineer-in-Charge. Make : Legrand/Schiender/ABB/ Indo Asian

S&F in replacement of exhaust fan of size 300 mm sweep including making necessary electrical connection complete all as specifed anddirected by Engineer in Charge. Note : Old exhaust fan shall be deposiedt in MES store yard of AGE EM-II.

S&F in replacement of BLDC ceiling fans , 1200 mm sweep, rated input power 30-35watt, 350RPM, air delivery of 225 CMM, rated voltage of 220-240 Volt, 50 Hz complete with down rod and with and including necessary connection to ceiling rose all as directed by Engineer in Charge. Note: Old ceiling fans shall be deposiedt in MES store yard of AGE EM-II.

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 2.5 sqmm drawn in new/existing MS/PVC conduit with 2.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete complete all as specified and directed by Engineer in Charge.. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. (ii) PVC Conduit if required shall be measured and paid separately under respective item.

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 4 sqmm drawn in new/existing MS/PVC conduit with 4 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete complete all as specified and directed by Engineer in Charge. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. (ii) PVC Conduit if required shall be measured and paid separately under respective item.

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in existing MS/PVC conduit with 6 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete all as specified and directed by Engineer in Charge. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. (ii) PVC Conduit if required shall be measured and paid separately under respective item.

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 10 sqmm drawn in existing MS/PVC conduit with 10 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete all as specified and directed by Engineer in Charge. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. (ii) PVC Conduit if required shall be measured and paid separately under respective item.

S&F rigid non metallic medium white / ivory PVC conduit medium grade ISI marked of size not less than 20 mm dia concealed position inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, saddlers, pipe hooks etc fixed properly on as in concealed position incl cutting chasing & making good to disturbed surfaces & matching with the existing colour of wall/floor etc all as directed by Engineer-in-Charge.

all as per item No 31 here-in-before but 25 mm dia PVC conduit medium grade ISI marked -do-.

M & L in replacement for energy saver LED light fitting 40 watt, 230 Volts, single tube mounting including LED Tube/ LED blocks 40 Watt ,Lumen OUTPUT NOT LESS THEN 100 LM /WATT with 50000 burning Hours, PF = 0.95 complete with electronic driver LED Printed board, end cover, connector box etc and accessories, prewired, LED including required fixing arrangements and electrical connection three core copper cable from ceiling rose to led light fitting all as directed including removing of UNSV tube light fitting. Make: PHILIPS BN100C LED 40S-6500 PSU L120GR or equivalent in Wipro Cat Part No LL24-541-xxx-57-xx /Havells cat No LUMILINEPLUS XS40W LED865SPCWH

M & L energy saving LED 4ft Batten 20 Watt with a nominal system lumen output of 2500 lumens and a minimum system efficacy of 110 lm/W with fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting and removing UNSV . The luminaire shall have a rate system lifetime of 40,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI>80. The luminaire shall meet IP 20 rating with THD < 10% and PF > 0.95. The luminaire housing should made of Extruded aluminium batten with a PC glossy diffuser. Philips Cat No : BN 021 LED 20S 6500 PSU GR S1 or equivalent in Wipro Cat Part No LL20-221-XXX-65NE3 / Havells Cat No : LUMILINE PLUSBS 20WLED865SPCSSIND

M & L energy saver LED Smart Batten fitting 10 watt, 230 Volts, Box type. etc and accessories, including required fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting and removing UNSV bracket with sketch fitting all all as directed. Make : Philips Cat No BN 021 LED10S - 6500 PSU GR S1 or equivalent in Wipro Cat Part No LL20-111-XXX-65NE3 or Havells

M & L in replacement complete for recess mounting LED Panel 600 x 600 mm fittings made of CRCA powder coated finish LED used shall be SMD type and fixture should have minimum efficiency at system level (Not chip level) 100lm/watt, life of fixture 50000 burning hours @ L70% Lumen maintenance CCT UP TO 6500,CRI MORE THEN 80,pf 0.95 and an operating voltage 140 Volt to 270 volt internal surge complete all as specified and directed by Engineer in Charge . Make: Philips Cat part No. RC380B LED 36S-6500 G4 L60 W60 PSU OD or equivalent model in Wipro/Havels as approved by GE

M & L in repaire for LED Building Security Light 70 watt of alumenium PDC housing glass coverwith IP 66 protection complete all as specified and directed. Make: Wipro Cat No. LR02-122-xxx-57G2 or equivalent in Philips/ Havels

Supply and fixing , post top , energy saving environmental friendly, long life aesthetically designed with good indirect symmetrical light distribution , die cast aluminium landscape IP 65 luminaire with high power COB LED as light source of capacity 35 watt made in pure UV resistant powder coated deicast alumnium with PMMA clear difuser for uniform illumnination and prewired with all accessories complete including necessary electrical connection all as directed. Make Wipro Cat No. LP07-431-xxx57-CL or equivalent in philips/Havells.

Supply and fix in replacement of bollard 15watt, 220-240V including light lamp having IP65/IK10 with base plate and making all necessary connection including fixing it in the ground with suitable clamping all as required and directed at site. Make: Philips cat Part BCP150 LED150/NW PSU 220-240V 7043 or equivalent in wipro/Havells.

Supply, installation of perforated GI cable tray, 2mm thick, 150 mm wide and 100 mm height including laying of existing LT cable of any size and capecity with fixing acceesories complete all as specified and directed by Engineer in Charge.

M&L for 3 core PVC insulated sheathed PVC stranded copper conductor cable of size 1.5 sqmm, 1100 volt grade all as specifed and directed by Engineer in Charge.

Supply ,laying and testing cable XLPE Insulated,screened,PVC bedded,galvanized steel strip power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 4 sqmm 4 core all as directed by Engineer in Charge.

Supply ,laying and testing cable XLPE Insulated,screened,PVC bedded,galvanized steel strip power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core all as directed by Engineer in Charge.

Supply ,laying and testing cable XLPE Insulated,screened,PVC bedded,galvanized steel strip power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 4 core all as directed by Engineer in Charge.

Excavation in trenches , not exceeding 1.5mtr wide and not exc 1.5mtr in depth for foundation etc or for shaft, well, cesspits, manholes, peier holes etc not exc 10 sqm on plan and not exc 1.5 mtr in depth and getting out in soft /loose soil complete all as directed by Engineer in Charge.

Returning filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm as in soft/loose soil complete all as directed by Engineer in Charge

Removing excavated materials (soil) not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above from the starting point complete all as directed by Engineer in Charge

Supply and filling fine ganga sand to the full width of tench for cushioning of cable forcable protection including spreading and punning down complete all as directed by Engineer in Charge. Note: Punned thickness of sand shall be measured for payment purpose.

M&L for well burnt old size bricks , sub class B brick laid dry flat with width equal to length of whole brick, as cable protection complete all as directed by Eng in Charge. ,

M&L for GI pipe light grade of size 100mm bore for laying of cable in trenches/ under floors for cable protection all as directed by Engineer in Charge.

M&L for GI pipe light grade of size 40mm bore for laying of cable in trenches/ under floors for cable protection all as directed by Engineer in Charge.

M&L for cutting of PCC/Hard standing/WBM road not exceeding 30cm in width and not exceeding 60cm in depth for passing of LT cable and making good with PCC(1:3:6) type C2 using 40mm graded stone aggregate finsihed fair and even all as directed by Engineer in Charge.

M&L for making horizental boring 60cm deep below road crossing for passing of LT cable in GI pipe complete all as directed by Engineer in Charge.

Supply, laying and testing LT cable XLPE insulation screened PVC bedded, galvanised steel strip or wire armoured electric power cable heavy duty , 1100 voly grade with stranded alumnium conductro of size 50 Sqmm, 3.5 core laid in trenches/duct/laid on wall etc. end termination, suitable size lugs, thimbales, glands, nuts bolts, washers insluation tape etc. complete all as specified and directed by Engineer in Charge.

All as per item no. 54 here in before but cable 70 sqmm, 3.5 core

All as per item no. 54 here in before but cable 95 sqmm, 3.5 core

All as per item no. 54 here in before but cable 150 sqmm, 3.5 core

All as per item no. 54 here in before but cable 240 sqmm, 3.5 core

M&L for earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, connected to galvanized earth strip 32x6mm by means of bolts, nuts, check nuts & washers of GI , protected with 40mm GI pipe light grade incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh, watering pipe of size 20 mm dia med grade, lugs, main Earthing lead upto 7.5 mtr including Charcoal dust, Salt etc all as shown in electrical plate No. 3 of SSR Pt-I, 2009 specification all as directed by Engineer in Charge.

S&F of onload change over on wall/ panels 415 Volt, 200 Amp capacirty, 4 P with sheet steel enclosure complete with all cable connection all as specified and directed by Engineer in Charge.

M&L for earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh, watering pipe of size 20 mm dia med grade, lugs, main Earthing lead upto 7.5 mtr including Charcoal dust, Salt etc all as shown in electrical plate No. 3 of SSR Pt-I, 2009 specification all as directed by Engineer in Charge.

santosh electronics

Preetpowercontrol

M/s Sohanil Construction

PAWAN COOL CORPORATION