Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹8.4 LAccepted-AOC SANAT NAGAR SRINAGAR PIN 190005 J K | SRINAGAR | JAMMU AND KASHMIR | 190005 | L-1 | Accepted-AOC L1 | |
| 2 | L-2₹8.7 L+₹31,375 (3.72%)Rejected-Finance OLD E 65 CWE AF SGR R O PARRAYPORA CHOWK NEAR SALFIA MUSLIM INSTITUTE SRINAGAR KASHMIR | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190005 | L-2 | Rejected-Finance Other than Lowest | |
| 3 | L-3₹9.6 L+₹1.2 L (14.0%)Rejected-Finance 0 GHULAM MOHAMMAD AND CO 0 GURUDAWARA II RAWALPORA SRINAGAR JAMMU AND KASHMIR RAWALPORA SRINAGAR JAMMU KASHMIR 190001 | SRINAGAR | JAMMU AND KASHMIR | 190001 | L-3 | Rejected-Finance Other than Lowest | |
| 4 | L-4₹9.8 L+₹1.4 L (16.5%)Rejected-Finance | L-4 | Rejected-Finance Other than Lowest | |
| 5 | L-5₹9.9 L+₹1.5 L (17.9%)Rejected-Finance | L-5 | Rejected-Finance Other than Lowest |
Tender Value
₹10.7 L
EMD Value
₹21,400
Closing Date
9 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) SRINAGAR
Garrison Engineer (AF) Air Force Station Srinagar 190 007
PROVN OF CERTAIN WORKS SERVICES AT 11 PS(U) UNDER GE (AF) SRINAGAR.
2024_MES_641835_1
GE (AF)/SGR-63/2023-24
Open Tender
Civil Works
Item Rate
180 days
SRINAGAR
As per NIT
9 documents required · 9 mandatory
₹500
GE (AF) Srinagar
₹21,400
Yes
6 Apr 2024
10 Feb 2024
11 Mar 2024
10 Feb 2024
9 Mar 2024
24 Feb 2024
Amount
Schedule 'A' Part-I (Building Works)
Surface excavaion n exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil, complete all as specified and directed.
M&L for broken stone or boulders hard core of gauge exc 63 mm but n exc 100 mm, deposite, spread and levelled in layer n.exc 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.
M&L for 100 mm thick PCC, 1:4:8, type- D2 (using 40mm graded curshed stone aggregate) as in sub base, complete all as specified and directed.
M&L for 10mm thick vitrified parking tiles, 1st quality, in approved shade, area of each tile exceeding 0.08 sqm but not exceeding 0.18 sqm in floors etc, set & jointed in neat cement slurry & pointed in matching coloured polymer cement based grout to match over and including 15 mm thick Screed bed or bedding layer in CM 1:6, complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, in any type of soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
M&L for plain cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
M&L for Rolled mild steel as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410-W (Gde E-250) quality-A, complete all as specified and directed.
M & L Rolled mild steel as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, wind Tie etc Fe 410-W (Gde E-250) quality A complete all as specified and directed by Engineer-in-Charge
M&L for Rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E-250) quality-A, complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
Taking down Chowkats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 sqm and credited to the contractor, complete all as specified and directed. Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed.
S&F powder coating of any colour (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars/ Sliding windows, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.), complete all as specified and directed.
S&F 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.
S&F5.5mm thick sheet glass, ordinary quality and glazing with aluminium glazing clips and rubber neosprine gasket in square or rectangular including hacking out old broken glass, complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and in paving n exc 15 cm thickness (below or above ground level), complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4, type B1 (using 20mm graded crushed stone aggregates) as in flooring, finished even and smooth, complete all as specified and directed.
M&L for 10mm thick virified Ceramic tiles, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick Screed bed or bedding layer in CM 1:6, complete all as specified and directed.
All as per ser item No. 1.21 here in above but in Skirting including 10 mm thick backing coatin CM 1:4.
S&F Powder coated superior quality venetian blinds horizontal or vertical type, complete all as specified and directed.
M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4, complete all as specified and as directed.
M&L for granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) over and including 20mm thick screed bed in CM 1:6 for laying of granite slab & pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including half moulding of granite edges, complete all as specified and directed.
S&F Pressed steel frames of 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including providing, cement concrete 1:3:6. Type C-1, (using 20 mm graded crushed stone aggregate) for filling in pressed steel frames, complete as specified and directed.
S&F 25 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
Prepration of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
S&F 125 mm long aluminium anodized barrel tower bolts of extruded section, complete all as specified and directed.
S&F 100 mm size hasp and staple, stainless steel including bolt to hinge plate and fixed with screws, complete all as specified and directed.
S&F 100 mm size butt hinges, Stainless Steel, complete all as specified and directed.
S&F 150 mm size, aluminium anodized handles, cast type, complete all as specified and directed.
M&L for Brick work with sub class ‘B’ bricks, using old size bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6, complete all as specified and directed.
Taking down cement plaster/cast in situ terrazo of any description on brick walls or concrete surfaces etc. including racking out joints, hacking for key, scrubbing down with water, complete all as specified and directed.
M&L for 15mm thick rendering on other than fair faces of brick wall finished fair & even in CM 1:6, complete all as specified and directed.
M&L for 5mm thick rendering thick on brick or concrete surface of ceiling finished fair & even in CM 1:3, complete all as specified and directed.
Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of putty filling, complete all as specified and directed.
Prepartion of old decorated plastered or unplastered surfaces of ceiling including filling of holes, cracks with cement wall putty making surface even and smooth and applying one coat of distemper oil emulsion paint,complete all as specified and directed.
Complete removal of existing treatment of walls and applying thin layer of wall care putty and prepare the smooth surface with sand paper and applying two coats of distemper oil emulsion paint on walls, complete all as specified and directed.
Preparing new plastered surfaces os ceiling and applying two coats of distemper oil emulsion including chalk whitening, complete all as specified and directed.
Complete removal of existing treatment of old painted surfaces of walls and applying two coats of weather paint colour and tint as ordered in any pattern over and including thin layer of wall care putty and one coat of primer including sides and soffits of the beams, fascias, parapets etc, complete all as specified and directed.
Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for, complete all as specified and directed.
Formwork to sides of conctete foundations,footing ,bases of columns,raft and raft beams sides and soffits (if any) of foundation and plinth beams and similars work vertical or to batter, complete all as specified and directed.
Formwork to sides of pillars, posts, struts, piers, columns and stanchions similars work square , rectangular rough finished surfaces of concrete complete all as specified and directed.
M&L for RCC 1:2:4, Type B-1 (using 20 mm graded crushed stone aggregate) for foundation, including rafts, footing, and the like, complete all as specified and directed.
M&L for RCC 1:2:4, Type B-1 (using 20 mm graded crushed stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, complete all as specified and directed.
M&L for mild steel TMT bars 08 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, complete all as specified and directed.
Schedule 'A' Part-II (Internal Electrification Works)
M&L for Point wiring for one light/fan/Exhausr fan controlled by one switch on Independent board with 1.5 sqmm PVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper conductor single core multi stranded copper cable confirming to IS:694(2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid concealed conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick and minimum 20 mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SI Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc with all accessories suitable for modular/conventional type fitment,provision for fixing of modular flush boxes of appropriate size and dimensions for fixing of piano switches/sockets/regulator etc including PVC insulated and unsheathed FRLSH 1.5 sqmm multi stranded copper conductor cable (green color) as continous earth lead wire connected to common earth and earth dolly complete all as specified and directed by Engr-in-Charge. Note: (i) For concealed point wiring cutting chases for conduit shall be measured and paid seperately (ii) For sinking boxes cutting chases for conduit shall be measured and paid seperately
S&F modular switch 1 way 6 Amp, 230 volts ,1 Module, complete all as specified and directed.
S&F modular Socket 6A, 230 volts, 2/3 Pin universal, 2 Module, complete all as specified and directed.
S&F modular cover plate with frame, 4 Module, complete all as specified and directed.
S&F Modular metal Flush box, 4 Module, complete all as specified and directed.
S&F LED lights fitting 1X18 watt 220V AC decorative box type with driver holder including LED light connecting up with three core flexible copper conductor cable of suitable size ceiling rose, complete all as specified and directed.
S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 4 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting, complete all as specified and directed.
S&F MCB SP, 5A to 32 Amps, 10 KA working on 230 Volts ,`B' curve, 50 HZ AC supply, complete all as specified and directed.
S&F MCB SPN, 32 Amps, 10 KA working on 230 Volts ,`B' curve, 50 HZ AC supply, complete all as specified and directed.
Supply, laying, jointing, testing , 10 Sqmm 2 core XLPE insulated and PVC sheathed with stranded aluminium conductor heavy duty, LT cable 1100 volts grade, armoured cable, conforming to IS 1554 Part I / ISI marked, including cable glands , cable lugs etc, to suitable the cable size, cables to be laid in trenches, fixed along the poles bare or through GI pipe laid under floors road etc fixed concealed in walls encased in GI pipe etc., complete all as specified and directed.
Schedule 'A' Part-III (External water supply Works)
Excavation in trenches in soft loose soil n.exc 1.5m wide & n.exc 1.5m in depth and n. exc. 10 sqm on plan for laying pipe in trenches and getting out, complete all as specified and directed.
Returning filling in trenches, spreading, levelling, watering and well ramming in layers n.exc 25cm insoft loose soil, complete all as specified and directed.
Removing of surplus soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above starting point, complete all as specified and directed.
S&F 25mm bore dia GI tubing, medium grade, with and including all fittings such as bends , elbows, tees, short length , socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc including testing, complete all as specified and directed.
S&F 20mm bore dia GI tubing, medium grade, with and including all fittings such as bends , elbows, tees, short length , socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc including testing, complete all as specified and directed.
S&F 50mm bore dia GI tubing, medium grade, with and including all fittings such as bends , elbows, tees, short length , socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc including testing, complete all as specified and directed.
Cutting of existing cast iron pipe in position for insertion of new tees, branches etc for 100mm CI/GI pipe, complete all as specified and directed.
S&F 25mm bore gun metal/bronze gate valve with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778: 1984, complete all as specified and directed.
S&F 50mm bore gun metal/bronze gate valve with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778: 1984, complete all as specified and directed.
M&L for lagging to pipes 20/25 mm bore used in external water supply of plumbing all around the 50mm thick bonded mineral wool pre-formed SNAp ON pipe sewctions of denisity 144 Kg/Cum confirming to IS 9842 provided with checken mesh wire netting 25 gauge 20mm mesh, complete all as specified and directed.
S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.
S&F pressure pump of cap 2.0 HP for boosting purpose up to 185 feet, complete all as specified and directed by Engr-in-Charge.
M&L for valve chamber of size 450x450x450 mm including necessary earth work in any type of soil, PCC 1:3:6 in bed concrete, brick work in CM 1:6 with 10 mm thick plaster internally & 15 mm thick externally in CM 1:4, 3mm thick MS cover with hinges and locking arrangement fixed to angle iron frame made out of 50mmx50mmx6mm MS angle complete with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on all metal works and applying two coats of white wash on all plastered surfaces, complete all as specified and directed.
Deduction to be made from BOQ for Schedule 'A' Part-IV (Credit Schedule from dismentling/taking down items) worth Rs 2400.00 during AOC. Note :- Tenderers shall not quote for this Schedule.
M/S SA INFRATECH
M/S GHULAM MOHAMMAD AND CO.
M/S FAROOQ AND SONS
M/S GULAM AHMAD ABDUL SAMAD
M/S SHOWKAT AHMAD WANI AND SONS
MEGA CONCRETE CONSTRUCTION ENGINEERS AND CONTRACTORS
SB ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .