Providing Lighting arrangement on Newly Constructed Roads between Sector-166 and 163, Noida

Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100 mm, Bottom dia 200 mm and base plate 16mm thick) having 3 mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. PS No. 649 (Make : Bajaj/Philips/Crompton/Valmont/Transrail)

Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100 mm, Bottom dia 200 mm and base plate 16mm thick) having 3 mm thikness with Double arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. PS No. 650 (Make : Bajaj/Philips/Crompton/Valmont/Transrail)

Supply of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect. . PS No. 1424 Cat AAA (Bajaj/Philps/Havells/Crompton)

S/L of aluminium conductor, PVC insulated armoured served sheathed cable 1100V grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt brickson sides and top of surface of the cable run shall be fixed MS clamps etc. of suitable size or as directed by the E/I. complete in all respects. The price are inclusive of earthwork such as digging, backfilling, supply & providing vcable identification markes. The amounting of the cable shall be properly connected with the earth conductor by clamps etc. connected with the earth conductor by clamps etc. PS.No. 501 (Make-Havells/Grandley/Polycab/ Diatron/Gloster/Kalinga) Size-16 sqmm X 4 core

70 sq. mm 3-1/2 core

S/F of Copper Cable of size 2.5 mm x 3 Core. Complete in all respect (AOR)

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. PS No. 504 16 sq. mm

70 sq. mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (Make-CPE/Duraline/Rex/Times/Narender Plast/Pioneer) i) 90 mm dia (OD-90 mm & ID-76 mm nominal) DSR Electrical-18 pg-52, I.No.14.16.2

63 mm dia (OD-63 mm & ID-50 mm nominal) DSR Electrical-18 pg-52, I.No.14.16.1