REPAIR TO STEEL FURNITURE INCLUDING PAINTING UNDER GE (N) MAMUN

Amount

Drg No:FD-1031 & 67(M): Almirah large steel Repair to Almirah large steel with replacement of following items(components) with new material complete and all as specified :-

Shelf made out of PBI sheet one mm thick

All as per srl item No 1.01 but fixing only loose/hanging shelves.

CP handles with washers (as per sample)

Locks with duplicate keys. (The locks shall be of GI with six brass levers, (as per sample)

Legs made out of 1mm thick PBI sheet

Base made out of PBI sheet 20 gauge

Mild Steel hinges 75mm long medium weight (as per sample), fixed by welding as directed.

MS round bar (locking rod) 10mm dia with brass bush fitting

M&L for painting to almirah large steel with preparation of surface i.e scrubbing down all old painted steel surface, remove dents by denting where required, applying putty etc, making surface smooth using sand paper as directed and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Drg No: FD-67 & 1032/1031: Almirah Medium steel Repair to Almirah Medium steel with replacement of following items(components) with new material complete and all as specified and directed:-

Shelf made out of PBI sheet 1mm thick

All as per srl item No 2.01 but fixing only loose/hanging shelves.

CP handles with washers (As per sample)

Locks with duplicate keys. (The locks shall be of GI with six brass levers, (As per sample)

Leg made out of 1mm thick PBI sheet

Base made out of PBI sheet 20 gauge

Mild Steel hinges 75mm long medium weight (as per sample), fixed by welding as directed.

M&L for painting to almirah medium steel with preparation of surface i.e scrubbing down all old painted steel surface, remove dents by denting where required, applying putty etc, making surface smooth using sand paper as directed and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Drg No: FD-243 & 257: Locker Steel Repair to locker steel with replacement of following items (components) with new material complete and all as specified :-

Shelf made out of PBI sheet 1 mm and fixing with rivetting on locker steel

All as per item srl No 3.01 but fixing only loose/hanging shutter.

CP handles 100mm long.

CP hasp & staples 75mm long

Mild Steel hinges 75mm long medium weight (as per sample), fixed by welding as directed.

Leg made out of 1mm thick PBI sheet

Base/shelves made out of PBI sheet 1 mm

M&L for painting to locker stee lwith preparation of surface i.e scrubbing down all old painted steel surface, remove dents by denting where required, applying putty etc, making surface smooth using sand paper as directed and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Drg No: FD-84 (M), FD-1004: Table office clerk steel Repair to table office clerk steel with replacement of following items (components) with new material and labour complete and all as specified

Table top size 4’x2’6” made out of 18mm thick MDF board of approved shade, 6mm thick teak wood beading alround. The top shall be French polished as directed.

Drawer with 1mm thick PBI sheet (with denting/welding or any other means to enable all the three drawer to work smoothly).

Locks with new GI locks with brass lever with duplicate keys.

PVC shoes

M&L for scrubbing down all old painted steel surface, preparation of surface and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Drg No: FD-383, 255: Teapoy verandah steel Repair to Teapoy verandah steel with replacement of following items (components) with new material and labour complete and all as specified :-

Table top 3'X1'6" made out of 18mm thick MDF board of approved shade, 6mm thick teak wood beading alround. The top shall be French polished as directed.

PVC shoe (as per sample).

M&L for scrubbing down all old painted steel surface, preparation of surface and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Drg No: FD-84 (M), FD-1003:Table office officer steel Repair to table office officer steel with replacement of following items (components) with new material and labour complete and all as specified :-

Top size 5’x3’ made out of 18mm thick MDF board of approved shade, 6mm thick teak wood beading alround. The top shall be French polished as directed.

Drawer with 1mm thick PBI sheet including the repairing the sliding surface of the drawer by smoothing the portion, denting/welding or any other means to enable all the three drawers to work smoothly.

Locks with new brass lever locks with duplicate keys (as per sample).

PVC shoe (as per sample).

PVC recessed Handle (as per sample).

M&L for scrubbing down all old painted steel surface, preparation of surface and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Drg No: FD-1008:Table 3'x2' steel Repairs to Table 3'x2' steel with Drawer replacement of following items (components) with new, material complete and all as specified :-

Top size 3'x2' made out of 18mm thick MDF board of approved shade 6mm thick teak wood beading alround. The top shall be French polished as directed.

Drawer with 1mm thick PBI sheet including repairing the sliding surface of the drawer by smoothing the portion, denting/welding or any other means to enable all the drawers to work smoothly.

GI locks with brass lever with duplicate keys(as per sample).

PVC shoes (as per sample).

PVC Handle (as per sample).

M&L for scrubbing down all old paint, preparation of surface with denting where required, applying putty etc and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Drg No: FD-1007: Table 3'x2' steel Repair to table 3'x2' steel without drawer with replacement of following items (components) with new material and labour complete and all as specified :-

Table top with new top size 3'x2' made out of 18mm thick MDF board of approved shade, 6mm thick teak wood beading alround. The top shall be French polished as directed.

PVC shoe (as per sample).

M&L for scrubbing down all old painted steel surface, preparation of surface and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Drg No: FD/E6/MAP/01: CHAIR COMPUTER Repair to CHAIR COMPUTER with replacement of following items (components) with new material and labour complete and all as specified :-

Removing existing u/s seat foam and tapestry cloth and S&F new seat with the provision of plywood commercial 12mm, foam 3" and tapestry cloth not less than 350/- mtr (as per sample) rest all as per drg.

Back with the new foam 2" and tapestry cloth (not less than 350/- mtr) (as per sample).

PVC moulded back frame with screws and PVC lipping (as per sample).

Hydraulic system (as per sample)

Castor wheel (as per sample)

PVC hand rest (as per sample)

Drg No: FD-165 : Table dinning ORs (aluminium top) Repair to table dinning ORs aluminum top with replacement of following items (components) with new material and labour complete and all as specified :-

Top made out of 18mm thick BWR plywood commercial covered with 0.88 mm thick aluminium sheet with 5” over lapping fixed with s/s screws

Mild Steel 25mm square tube 16 gauge in frame including stiffener duly welded.

M&L for welding upto 2.5mm long welding to steel frame with electric welding,smoothing the welding portion, scrubbing down all old painted steel surface, preparation of surface and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Drg No: FD-75 :Chair Steel Tubular with/ without arms Repair to chair steel tubular with/ without arms with replacement of following items (components) with new material and labour complete and all as specified:-

Seat made out of teak wood duly polished and canned with 2mm wide cane, (fixed with nuts and bolts) including welding MS flat 25 x 3mm 02 Nos (front & back) beneath the seat.

All as per item No 11.01 but back of chair tubular steel with arms.

PVC shoes/ PVC Caps (as per sample)

M&L for scrubbing down all old painted steel surface, preparation of surface and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Drg No: FD-1009: Table 3'x3' Steel Repair to Table 3'x3' Steel with replacement of following items (components) with new material and labour complete and all as specified:-

Table top with new top size 3'x3' made out of 18mm thick MDF board of approved shade, 6mm thick teak wood beading alround.The top shall be French polished as directed.

PVC shoes (as per sample)

M&L for scrubbing down all old painted steel surface, preparation of surface and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Drg No: FD-2045: Chair CBA Steel Cushioned Repairs to Chair CBA Steel Cushioned with replacement of following items (components) with new, material complete and all as specified:-

Seat (U foam 3" thick 32 density covered with tapestry cloth of market rate not less than Rs. 350/- Per mtr (as per sample). Make : Sleepwell/Kurlon or equivalent as approved

Back (U foam 3" thick 32 density covered with tapestry cloth of market rate not less than Rs. 350/- Per mtr (as per sample). Make : Sleepwell/Kurlon or equivalent as approved

Hand rest made of black intergal skin polyurethane reinforced with MS insert (as per sample) .

Drg No: FD/E6/ MAP/12: Chair Writing Steel Cushioned Repair to Chair Writing Steel Cushioned with replacement of following items (components) with new material and labour complete and all as specified :-

Seat (U foam) covered with tapestry cloth of market rate not less than Rs. 350/- per mtr (as per sample) Make : Sleepwell/Kurlon or equivalent as approved

All as per item 14.01 but Back

Hand rest made of black intergal skin polyurethane reinforced with MS insert (as per sample)

Drg No: FD-107 (M): Desk Repair to Desk with replacement of following items (components) with new material and labour complete all as specified :-

Box made out of prelaminated particle board18mm extrerior quality alround 4mm thick TW beading over all, size 1270x530x840mm

Mild Steel 25mm square tube 16 gauge cut and duly welded (as per sample), joint made smooth and applying one coat of red oxide primer.

Rubber shoe (as per sample)

All exposed steel surfaces to be painted with two coats of synthetic enamel paint to the required finish after preparation of surface by sand papering, removing of old filth to smooth surface complete all as specified and directed.

Drg No: FD-107M :Rack Adjustable 6 Tier Repair to Rack Adjustable 6 Tier with replacement of following items (components) with new material and labour complete and all as specified :-

Shelf made out of 1.00mm thick PBI sheet

Spray painting with two coats of synthetic enamal paint Olive Green over a coat of metal primer after scrubbing all the old paint preparation of surface & denting where required, applying putty etc. complete all as specified and directed.

Deduct :Total amount of SCH 'A' SECTION-II (SCH OF CREDIT) Rs 31277.50 (to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum)

vivek and co (BID ID -3099150)

M/S Ajay Saini (BID ID -3100294)

s k construction co (BID ID -3114781)

M.B TUBE AND ALLIED IND. Contr (BID ID -3099147)