Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹15.0 LAccepted-AOC H NO 1237 PANA PAPOSIAN NARELA NORTH WEST DELHI NEW DELHI 110 040 | NEW DELHI | NORTH WEST DELHI | DELHI | 110040 | 1 | Accepted-AOC L1 bidder | |
| 2 | 2₹15.7 L+₹34,996 (2.28%)Rejected-Finance | 2 | Rejected-Finance other than L1 | |
| 3 | 3₹17.3 L+₹2.0 L (13.2%)Rejected-Finance 20 8 EWS PREETAM NAGAR COLONY ALLAHABAD | PRAYAGRAJ | UTTAR PRADESH | 211001 | 3 | Rejected-Finance other than L1 | |
| 4 | 4₹22.3 L+₹7.0 L (45.8%)Rejected-Finance | 4 | Rejected-Finance other than L1 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
4 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Tughlakabad
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
WELCOME MAINTENANCE AND PERIODICAL SERVICES BY USING SMART PERIODICAL METHODILOGY TO CERTAIN BLDGS AT AF STN NAJAFGARH UNDER GE (AF) TUGHLAKABAD
2024_MES_655564_1
GE/TKD-29/2024-25
Open Tender
Civil Works - Others
Item Rate
270 days
GE AF Tughlakabad
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
8 documents required · 8 mandatory
₹0
₹50,000
Yes
11 Nov 2024
9 Jul 2024
6 Sept 2024
9 Jul 2024
4 Sept 2024
23 Jul 2024
Amount
Complete removing of existing treatement by scrappping with asian paints TruCare Wall sander:-L-01/H-01(Having mechanical vaccum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit havingg dia of 7"/"9" to mame the surface free from dust, loose paint etc, by skilled labour complete all as specified and directed by Engr-in-charge.
M&L for waterproof cement based putty @ 1Kg (undiluted) per sq mtr. of average thickness 1mm of asian paints or its equivalent over the plasterd/ old painted wall after scrapping by skilled labour. Step 1 :- Mix the putty powder by adding 40-50% water and mix it with asinan Piants Trucare putty mixer (Trucare Putty mixer with min 1400W power having mixer rod of industrual stell grade 45 with the mixing capacity of min 2.5Kg putty per minute). Step 2 :- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Graco Spray Machine (Model: EH 230DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041" Step-3 : Allow 6-8 hrs time ot dry the putty surface.
M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun wotjh a max materal hose length of 30 mtr the spray machine should be of reputed manufacturer woth pro guard technology and capability of traching pressure and paint usage and certified by paint maufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach area and prnetration of ditemper on the surface to achieve excellent application using limited manpower complete all as specified and directed by Engr-in-charge. NOTE:-Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean envinment certifird by paint manufacturer.
M&L preparing old surface of walls, plastered or unplastered by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots & applying two coat of distemper oil emulsion (Washable oil bound distemper) on wall including cornices, pillasters complete all as specified & directed.
M&L preparing old surface of walls, plastered or unplastered by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots & applying one coat of distemper oil emulsion (Washable oil bound distemper) on wall including cornices, pillasters complete all as specified & directed.
M&L preparing old surface of ceiling, plastered or unplastered by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots & applying one coat of distemper oil emulsion (Washable oil bound distemper) on ceiling including cornices, pillasters complete all as specified & directed.
M&L for preparing old surface of walls plastered or unplastered by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots & applying two coat of white wash complete all as specified and directed by Engr-in-charge.
M&L for preparation of old plastrered or un-plastered surfaces of ceiling & applying two coats of white wash complete all as specified and directed by Engr-in-charge.
M&L for preperation of old painted surface of wood or wood based materials of any description not otherwise described over 10cm girth or width & applying one coat of synthetic enamel paint Ist quality complete all as specified and directed by Engr-in-charge.
M&L for preparing old painted surfaces of steel or iron of materials of any description not otherwise described over 10cm girth or width & applying one coat of synthetic enamel paint Ist quality complete all as specified and directed by Engr-in-charge.
M&L complete removal of existing treatment on walls/chajjas and applying two coat of cement based paint upto four storey bldgs including necessary scafolding/arragement complete all as specified and directed by Engr-in-charge.
M&L for preparation of old surfaces of brick/concrete wall surface by brushing, washing and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
Taking down cement plaster on brick wall including racking out joints, hacking for key scrubbing down with water complete all as specified and directed by Engr-in-charge.
M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces including patches or on fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed by Engr-in-charge.
M&L for 15mm thick rendering in cement mortar 1:4 to stone masonry wall surfaces including patches or on other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for rendering 10 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for preparing newly plastered surfaces and applying applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of 1mm thick wall care putty complete all as specified and directed.
M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified and directed by Engr-in-charge.
M&L for preparation of newly plastered surfaces & applying three coats of white wash on ceilings complete all as specified and directed by Engr-in-charge.
M&L for filling voids in masonary using chemical emulsion @ one ltr per hole at a distance of 300mm center to centre (Apart) including drilling holes at 45 degree and replugging the existing floor etc complete all as specified and directed
M&L for treatment at the points of contact of wood work by chemical emulsion (in oil or kerosenebased solution) @ half ltr per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm center to center and sealing the same complete all as specified and directed by Engr-in-charge.
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engr-in-charge.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engr-in-charge.
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed by Engr-in-charge.
S&F 105x60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified and directed by Engr-in-charge.
S&F 125x60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified and directed by Engr-in-charge.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete FE 290 Gde E-165 complete all as specified and directed by Engr-in-charge.
M&L for flush shutter 40 mm thick solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed by Engr-in-charge.
S&F 35mm thick factory made IInd Class Hard wood panelled door shutters single panel with lock rail and panel of 9mm B.W.P. marine grade plywood bonded with high quality liquid phenol formaldehyde synthetic resin adhesive conforming to IS-710 or 12mm thick particle board veneered with commercial veneering on both faces. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engineer-in-Charge
S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engr-in-charge.
S&F 18/19 mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work or aluminium door, complete all as specified and directed by Engr-in-charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing
S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F 100 mm size butt hinges medium weight colled rolled mild steel complete all as specified and directed by Engr-in-Charge.
S&F 125 mm size aluminium handles, cast type anodised complete all as specified and directed by Engr-in-Charge.
S&F 125 mm long Aluminium tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-Charge.
S&F 125 mm long Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-Charge.
S&F 125 mm size mild steel, oval type handles, stove enamelled black anodised complete all as specified and directed by Engr-in-Charge.
S&F 300 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed by Engr-in-Charge.
S&F (piano) type hinges mild steel bright finish as electrogalvised 30mm width of flaps (with open) complete all as specified and directed by Engr-in-Charge.
M&L for anodised aluminium frame (minimum 50 micron powder coating) for doors, windows, ventilators with one or more rebates including cleat for fixing etc. complete all as specified & directed by Engr-in-charge.
S&F of aluminium powder coated of any colour (thickness or powder coating not less than 50micron) doors shutters aluminium saction weighing 0.55 kg/sqm including necessary jointing cleats, glazing clips, rubber neoprene packing, handles two nos in each door, hinges, anodised aluminium snap beading, screws complete all as specified and directed by Engr-in-Charge.
S&F of aluminium powder coated of any colour (thickness or powder coating not less than 50micron) windows and ventilator shutters, with aluminium grill, side hung type, without sash bars aluminium saction weighing 0.55 kg/sqm including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stay 150mm long (1 no) hinges type B21 100 mm long (2 No) suitable handle (1No) complete all as specified and directed by Engr-in-Charge.
S&F fixed galvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanized wire staples in door and steel window complete all as specified and directed by Engr-in-Charge.
M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level and removal all rubbish material outside of Defence Land complete all as specified and directed by Engr-in-Charge.
M&L 10 mm thick rendering in cement mortar 1:4 to stone masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed by Engr-in-Charge.
M&L Glazed ceramic coloured tiles on vertical surfaces 300x200x7mm/350x 250x7 mm/450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engr-in-Charge.
M&L 25 mm thick PCC 1:2:4 type B-1, using 25 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed by Engr-in-Charge.
M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed by Engr-in-Charge.
M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed by Engr-in-Charge.
M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed by Engr-in-Charge.
M&L for Vitrified ceramic light shade coloured tiles 10mm thick area of each tiles not exc 0.36 sqm , in floor etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of the tile complete all as specified and directed by Engr-in-Charge.
M&L for Vitrified ceramic light shade coloured tiles 10mm thick area of each tiles not exc 0.36 sqm, on vertical surface & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of the tile complete all as specified and directed by Engr-in-Charge.
M&L for 16 to 18 mm thick Granite (of any tpe) work (tablee rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge.
M&L for 100 mm thick PCC (1 :4:8) type D2 using 40mm agg as in sub base complete all as specified and directed by Engr-in-Charge.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge.
M&L for Machine Pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS- 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed by Engr-in-Charge.
M&L for 25 mm thick chequered cement concrete coloured tiles glossy finished of any shape any size set jointed and pointed in neat cement slurry in floors with grey cement and no pigments complete all as specified and directed by Engr-in-Charge.
M&L for WPT in sunken floors as described here under:- Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement . (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane , minimum 3 mm thick and weighing not less than 3.0 kg/ sqm of make super thermolay manufactured by STP ltd or Hyper Plas (Polyster) manufactured by M/S IWL Ltd or 'Shatiplas' (Polyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyster matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or EMW Flate' of M/S Texas India Ltd) at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch , with a over lap of 75mm at the sides and 100mm at the ends sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions including preparation of surface by removing the existing treatment, complete all as specified an as directed Note :- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid seperately
M&L for PCC ( 1:5:10) type E-2 using brick koba aggregate for filled up the sunken portion complete all as specified and as directed by Engr-in-Charge.
Taking up or down15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed .
Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.
Dismantling water tank and removing to store exc 250 ltr but n exc 500 ltrs
Dismantling water tank and removing to store Exc 500 & n exc 1000
S&F 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.
S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engr-in-charge.
S&F 500 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed by Engr-in-charge.
S&F 1000 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed by Engr-in-charge.
S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-charge.
S&F in repairs, vitreous China wash hand basin including pedastal, white, flat back size 550 x 400mm including 15mm dia, 450 mm long HDPE PVC connection, 32 mm dia wast coupling and 32mm bore Waste coupling fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement including CI brackets complete all as specified and directed by Engr-in-charge.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white with "P" or "S" Trap front or back inlet fixing bols, PVC seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and making all necessary connection complete all as specified and directed by Engr-in-charge.
S&F in repair PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet , ball valve, float and handle including brackets complete all as specified and directed by Engr-in-charge.
S&F in repairs plastic water closet seat white colour,closed pattern with flat bottom and cover with mild steel CP or aluminium hinge device ect complete all as specified and directed by Engr-in-charge.
S&F in repair 15 mm dia stop cock fancy type, chromium plated with long shank and cup (conncelaed type) for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore fancy type bib tap cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-charge.
S&F in repair pillar taps (fancy type), of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore mixture valve chromium plated fancy type for wall in two/three pin fixed to iron pipe complete all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore mixture valve chromium plated fancy type for wash hand basin centre hole fixed to iron pipe complete all as specified and directed by Engr-in-charge.
S&F in repairs of CP sink mixer telephonic type mixer cast copper alloy fancy type chromium plated crutch and butter fly handle screwed down complete all as specified and directed by Engr-in-charge.
S&F in repairs, toilet cabinet with mirror of overall size 350 x 450mm complete all as specified and directed by Engr-in-charge.
S&F in repairs chromium plated brass tubular towel rail 20 mm dia, D type for wash hand basin centre holed fixed to iron pipe complete all as specified and directed by Engr-in-charge.
S&F in repirs Soap dish, embedded in the wall approximate size 160x160x90mm complete all as specified and directed by Engr-in-charge.
S&F in repair shower rose 125 mm size brass chromium plated with swivel joints including fixing steel pipe or unions complete all as specified and directed by Engr-in-charge.
S&F in repirs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-charge.
S&F in repairs stainless steel Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed by Engr-in-charge.
S&F in repairs of Health Faucet with 1.5mtr long SS tube and hook complete all as specified and directed by Engr-in-Charge.
S&F in repairs flushing jet CP for pedestal pattern wc incl.flexible pipe and brass chromium plated nuts and bolts and water pipe of size 1150 mm long b/w dia & fixed complete all as specified and directed by Engr-in-Charge.
S&F in repairs of corner glass shelf 12" complete all as specified and directed by Engr-in-Charge.
S&F in repair toilet paper holder of viterous china fixed ro walls with CP brass screw white colour complete all as specified and directed by Engr-in-Charge.
S&F in repairs of kitchen basket stainless steel size 435mmX510mm including stainless steel guide channel complete all as specified and directed by Engr-in-Charge.
S&F in repairs 25 mm dia fancy CP curtain rod with bracket and screw with neccessary all fittings complete all as specified and directed by Engr-in-Charge.
S&F in reapir PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed by Engr-in-Charge.
Dismantling wrought iron or MS work of any description and in any position all as specified.
Dismantling plain or corrugated steel shetting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engr-in-Charge.
S&F mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge.
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed by Engr-in-Charge.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet incluseive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engr-in-Charge.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engr-in-Charge.
M&L for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.
M/S RK Builders (BID ID -3081287)
MOHIT ENTERPRISES (BID ID -3081121)
M/s R P Enterprises (BID ID -3082396)
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .