GE/H-20/2020-21

Amount

Dismentling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Dismantling of wall and ceiling boards of any description, any thicknes including cover fillets and frame work complete all as specified.

Dismantling of boarding any description, fixed in any position with nails complete all as specified.

M & L for light or dark shade, double charge/ultra charge virified tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick cement screed bed in CM 1:6, set and jointed complete all as directed.

All as item No 4 above but in dado/skirting over 10mm thick rendering in CM 1:4, complete all as specified.

M & L for glazed ceramic (digital with glossy finished) coloured tiles 600x300x8 to 9 mm thick in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified.

M & L Non skid coloured ceramic tiles 7-8 mm thick (square or rectangular) area of each tiles exc 0.06 sqm but n exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete as specified.

M & L for 18 to 20mm thick granite of any type (table rubbed & polished) in jambs, pillars, window cills, plate forms in CM (1:4) including pointing in white cement (1:2) ,using marble dust with admixture of pigment to match with shade of granite incl 15mm thick screed bad or backing layer in CM 1:4 complete all as directed.

M&L for exposed GI frame/grid system duly powder coated for module size of 600 x 600 mm suitable for lay-in aluminium / mineral fibre ceiling tiles, having main T runner of 24 mm size, suspended at 1200mm C/C and cross T runner of 24 mm size, suspended at 600mm C/C with interlocking arrangements to form grid of 600 x 600mm, perimeter runner/channel of 15 mm size, main and cross T runner supported by 4mm dia GI rod from slab / Roof, wall angle etc with and including all fixing accessories and making good of distrubed wall surfaces with POP and one coat of oil emulsion distemper, as required to match the existing surfaces, complete all as directed. (Note: The tiles shall be measured and paid seperately under respective item of this schedule)

M&L for metal false ceiling, lay-in type, 0.5 mm thick, having tegular edge profile, duly powder coated, perforated type with glass fibre acoustic fleece, suitable for false ceiling grid/frame module of 600 x 600mm size, complete all as directed. Make : Armstrong / Gypboard / Anchorlam anchor (Note : The grid /frame shall be measured and paid for separetly under respective item of this schedule.)

S & F in repairs solid PVC wall panelling consisting of 5mm thick wood grain finish PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S & F in repairs 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S&F 18 mm thick Medium density fibre board, exterior grade, fixed as in cupboard and cupboard shutters including with frame work incl leeping/beading fancy type with screws complete all as specified.

S&F soft closing clip on hinge, full / half overlay type, of stainless steel, all as specified.

S&F 100 mm size stainless steel handles, matt finish, complete all as directed. Make : Hettich/Ozone/Safex/Kich/Dorma/Hardwyn.

S&F brass two levers keys,Locks, cupboard,grade I,(ISI Marked) size 50 mm suitable for cup board door/drawer , complete all as specified.

Taking down of shutter of any description exc 1.0 sqm but n exc 2.00 Sqm each complete all as specified and directed.

Taking down of shutter of any description exc 2.00 Sqm each complete all as directed.

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area n exc 1.50 Sqm complete all as directed.

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area exc 1.50 Sqm but n .exc 4.00 sqm each complete all as directed.

S/F Factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick (stiles) with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face etc complete all as specified and directed.

S & F 100mm size, medium weight stainless steel butt hinges complete all as specified.

S&F aluminium anodised barrel tower bolt 200mm long extruded section all as specified.

S&F 150mm extruded aluminium handles fabricated type anodised complete all as specified.

S&F aluminium powder coated glazed window of frame 125 x 38 x 1.6mm fixed type window using insulated glass harmetically sealed with 6mm SGU titanium blue cool lite STB 120 toughened glass of approved manufacture colour and shade (glazing shall comply with single glass of U-value 5.3w/sqm k, solat factor 0.33, reflectance 19%)+12mm dry air cavity+5mm clear float glass all seperated by a hollow aluminium spacer bar with twin lines of micro hole as approved filled with molecular dissicant of approved make and using primary hot melt butly and secondry polysulphide or silicon sealant of approved make complete all as specified.

S&F aluminium powder coated glazed three track sliding window of frame 100 x 44 x 1.5mm and sliding shutter of section 40mm x 19mm including 3mm thick sheet glass, ordinary quality exceeding 0.5 Sqm in each pane, in two track shutter and in one track stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all fittings such as aluminium handle of size 100mm and locking arrangements with each moving leaf all as specified. ( Note; 1.The rate quoted by the tendere are included sliding chawkhat,shtter frames,sheet glass, wire cloth and fittings such as handle, locking arrangement etc complete and nothing extra shall be paid on this account. 2. The measurement shall be in sqm computing from outer dimension of the track which shall be inlcuded two half wide shutter of sheet glass overlapping each other equal to width of shutter section, and one half wiide shutter of wire gauge)

S&F, aluminium powder coated chowkhats of 100x44x1.5mm section with rebate complete frame

Supply, fabricating and fixing of aluminium door shutter powder coated of extrusion aluminium section, Vertical style of door shutter of size 85mmx44.45mmx1.5mm thick. Top, middle and bottom rail of size 85mmx44.45x1.5mm thick and fixing plain/tinted sheet glass or ACP sheet with aluminium beading and rubber gasket/beading as directed One mortice lock for aluminium door (each), and three nos aluminium hinges of size 100mm of and two aluminium tower bolts of 250mm size and fixed with rawl plug including rectification of floor/wall to match the existing surfaces all as specified and as directed by Engineer-in-Charge at site. (Not: Sheet glass / ACP shall be measured and paid seperately under respective iteme of schedule)

M&L for 5.5 mm thick plain/ frosted glass fixed with beading in aluminium frame all as specified.

S&F 5mm thick aluminium composite panel (ACP Sheet) including necessary clips, rubber packing & aluminium beading (aluminium frame ) all as specified.

S&F in repairs Toughened glass (plain or frosted) frameless door with fixed portion, of 12 mm thickness, including cutting holes, edges rounded and etching works etc and all kind of SS patch fitting & fixture, spider patch etc, complete all as directed. Make : Modiguard / Saint Gobain / Triveni float glass. (Note : Handle,lock and floor spring shall be measured and paid seperately under respective item of schedule)

S&F of stainless steel handle 450 mm long fixed to 12 mm thick toughned glass door with and including all fixing accessories i. e. bolt washer, adhesive etc, complete all as directed.

S&F of SS door lock, glass to glass type, suitable for 12 mm thick frameless toughned glass door with and incl all fixing accessories i. e. bolt, washer, screw, adhesive etc of suitable size, complete all as directed.

S&Fin repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as directed.

S & F in repairs door closer, Aluminium (die cast) body,hydraulically regulated, designation No. 3, unversal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg

S&F aluminium partition wall of aluminium section 100mm x 44mm x 1.5mm thick frame rectangular section and panel of PVC sheet or prelaminated board in bottom panel and 5.5mm thick sheet glass at top panel with rubber lining and aluminium beading around length including necessary fixing arrangement for bottom and top member of aluminium frame in floor/PCC/Brick work as per site requirement with rawl plug etc, including chromium plated steel screws 60cm centre to centre all as specified and directed by Engineer-in-Charge (Note : The rate quoted by the tenderer shall be inclusive of PVC panel/pre laminated board/ and sheet glass and nothing extra shall be paid on this account )

S&F of venatian blinds vertical type 100mm wide slats made out of fabric cloth of approved shade fixed as per the instructions of manufacturers, complete all as specified .

S & F 1mm thick of Stainless steel sheet of (Gd-304) with & including SS screws / fasteners etc and all kind of machine works i.e. cutting, welding, bending, moulding, etc to get the required shape and size and fixed to any position and at any surface etc, complete all as directed.

S & F of SS (Gd-304) framed work of angles, hollow tubes (squre/rectangular), flats etc of any shape and size and all kind of machine works i.e. cutting, welding, bending, moulding, grinding, polishing, buffing etc to get the required shape and size, fixed to any position and at any surface with fastners/screw etc, complete all as specified directed.

S & F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, wall or in floors incl taking down exist pipe complete all as specified.

Demolition of brick work built in cement mortar including all quoins, arches, pillarsetc complete all as directed.

M&L for brick work with sub class B bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified.

Taking down cement plaster on brick or stone walls including racking out joints, hacking for key scrubbing down with water etc.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of any description and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

S & F 150mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in walls with 25mm width GI ring complete all as specified.

S & F 150mm dia PVC (SWR) bends complete all as specified.

S & F in repairs fancy type chromium plated long body bib taps 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as directed and specified.

S & F in repairs stop angle valve cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified.

S & F in repairs CP hygienic spray (2 in 1 facucet with 1.5M long tube) complete all as specified.

S & F in repairs angle valve 2 in 1 type cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed in iron pipes,socket or for union all as directed and specified.

S&F in repairs stainless steel handle 450 mm long fixed to 12 mm thick toughned glass door with and including all fixing accessories i. e. bolt washer, adhesive etc, complete all as directed.

S & F in repairs urinal spreader of cast copper alloy with brass fixing with 15 mm dia pipe complete all as specified

S&F in repairs 5mm thick aluminium composite panel (ACP Sheet) including necessary clips, rubber packing & aluminium beading (aluminium frame ) incl taking down all as specified.

S&F in repairs CP brass pillar taps fency type cast copper alloy with capstan heads,chromium plated screwed down high pressure with or without lettered hot or cold with long screwed sank and flynuts screwed for iron pipe of 15 mm bore complete all as specified.

S&F in repair 32 mm dia CP brass waste coupling for wash hand basin with long screwed shanks and fly nuts flange complete all as specified.

S & F in repair vitreous china wash hand basin white flat back of size 550x400mm including cutting for and pinning in ends of brackets, PVC flexible waste pipe 32mm dia, PVC connecting pipe etc complete all as directed and specified.

S & F in repairs PVC low level flushing cistern valveless, syphonic action type with inlet ball valve, float handle including brackets and (HDPE) flush pipe of 32mm dia with brass nut & washer, PVC connecting pipe, etc. connecting with WC inlet and making good the surface to match with existing complete all as directed and specified.

S & F in repairs vetreous china washdown water closet pan (pedstal pattern) white including bolts and excluding flushing cistern and flush pipe including connection to flush pipe, anti syphonage pipe and fixed and connection to drain complete all as specified .

S & F in repairs 20mm dia CP towel rail 600 mm long all as specified and directed.

Dismantling of 100 mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified

Dismantling of 75 mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified

S&F 100mm dia sand cast cast iron soil waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors or fixed on wall complete all as specified and directed.

S&F 75mm dia sand cast and pipe soil waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors or fixed on wall complete all as specified and directed.

S&F 100 mm dia cast iron bends(any radius) diminishing pieces or tapers(;larger bore measured)

S&F 75 mm dia cast iron bends(any radius) diminishing pieces or tapers(;larger bore measured)

S&F 75 mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 complete all as specified

S&F100 mm dia Cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 complete all as specified

Taking up or down 15mm bore steel tubing and connections including cleaning for re-fixing or removal to store.

All as srl item No 69 here-in-before but 20mm bore .

Supply and fix galvanised steel water tubes medium grade 15mm dia with fittings, fixed to walls ceilings and laid in floor etc complete all as directed and specified.

Supply and fix galvanised steel water tubes medium grade 20mm dia with fittings, fixed to walls or ceilings and laid in floor etc complete all as directed and specified.

M&L cutting chases, pinning in brick work making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified.

S & F in repair stainless steel curtain rod 25mm dia of make VISTA or eqv. including brackets, a pair of side knobs at every 1.00 to 1.50 mtr span fixed to wall complete all as specified and directed.

Demolition of cement concrete (reinforced ) n.exc 15 cm thick as in roofs, beams, chajjas and similar suspended work complete as specified.

M&L formwork to soffit of suspended slabs, horizontal or slopping ,such as roof slabs, floor slabs, landing and simillar work n.exc 200mm thick.

M&L RCC nominal mix 1:1.5:3 using 20mm graded stone aggregates as in slab.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking bending, spirally for hooping end and binding with and incl mild steel wire (annealed) not less than .9mm dia or securing with clips quality confirming Fe 410S or Fe-410O

Demolition of cement concrete in ground floor (unreinforced) and pavings n exc 15cm thickness (below or above ground level) complete all as specified.

M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick as in sub base cemplete all as directed and specified

M&L 20mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes all as specified

M&L for Ultra design cement concrete tiles of size 300x300x22 mm thick made in rubber moulding with white or coloured cement, as in floors incl over screed bed, set, jointed and pointed in neat cement slurry complete all as specified and directed.

M & L machine precast colour concrete decorative interlocking paver block of any shape and size confirming to IS15658-2006 of 60mm thickness M-35 Gde complete all as specified.

M & L 25 mm sand filling under floors including watering and consolidation complete all as specified.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in roof kerbs, mud stops & padding, rounded of chamfered on edges complete all as specified.

Demolition of stone slab and tiles of any description or thickness in floor, apron etc complete all as specified.

M&L machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing complete over 20mm thick screed bed or beding layer in CM 1:6 complete all as specified.

M & L for priming roof surfaces and applying water proofing treatment over roofs comprising of the following incl taking down existing treatement and preparation of surface complete all as specified & as directed:- (a) Applying oil bound bituminous primer at the rate of 0.4 Ltrs/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated. (b) Applying one coat of hot straight run bitumen @ 1.20 Kg/Sqm of grade 30/40 confirming to IS-73 (Grade S-35). (c) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyster matt, with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 100mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instruction including preparation of surface. (d) Applying one coat of hot straight run bitumen grade 30/40 (Grade S-35) conforming to IS-73 @ 1.20 kg/Sqm. Make: "a) Multi-plas-M/s Texas; (b) Shalimar Tar Products; (c)Tikitar;(d) Torch Tar (e) Pidilite Ind Ltd (Dr Fixit Torch Shield) (f) Bengal Bitumen (g) Modern Bitumen Pvt Ltd (h) Shivam Tar Products (j) Hyper Plas from IWL India Ltd (k) STP Ltd as approved by GE. Note :- The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. The contractor shall give 10 years guarantee for effectivenss of water proofing treatment, 2.5% of work done amount of this item shall be retained from contractors payment for a period of 10 years reckoned from date of physical completion of this work, or inlieu contractor may deposit bank FDR for the said amount for 10 years which shall be released by GE on expiry of satisfactory completion of 10 years period.

Complete removal of existing treatment of wall and applying two coat of wallcare putty over a coat of primer including filling uneven surfaces and making the wall surface/Jams/Corners even and smooth to prepare the surface to receive oil bound distemper all as directed.

M&L for applying two coat of oil emulsion paint over a coat of primer on existing prepared surface of wall complete all as specified and directed

S&F aluminium anodised powder coated Deco grill DG-104 10mm wide with U shape snap beading complete all as specified.

M&L for decorative laminate, 1.0 mm thick, smooth surface finish, wooden texture colour and pattern, fixed with approved adhesive (Make : Fevicol) to doors , including taking down of old laminates, complete all as directed. Make : Greenlam / Archid lam/ Merino Lam/ Sunmica

sony engineering works

Shivam Firetech Engineers

SANJEEV ENTERPRISES

ACR ENTERPRISES

V.K. Enterprises

MRITUNJYA ASSOCIATES

GLIBS CONSTRUCTION

ASHISH GARG AND COMPANY