Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.2 LAccepted-AOC MOURYA HEIGHTS SATAVNAGAR HANDEWADI ROAD HADAPSAR PUNE 28 | PUNE | MAHARASHTRA | 411028 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹27.2 L+₹1.7 L (6.85%)Rejected-Finance S NO 7 3 FLAT NO 4 HILL VIEW RESIDENCY LOHEGAON PUNE 411047 | PUNE | MAHARASHTRA | 411047 | L2 | Rejected-Finance High Rate | |
| 3 | L3₹28.4 L+₹3.0 L (11.6%)Rejected-Finance | L3 | Rejected-Finance High Rate | |
| 4 | L4₹28.5 L+₹3.0 L (11.9%)Rejected-Finance | L4 | Rejected-Finance High Rate | |
| 5 | L5₹29.5 L+₹4.1 L (16.1%)Rejected-Finance | L5 | Rejected-Finance High Rate |
Tender Value
₹34.5 L
EMD Value
₹69,000
Closing Date
28 Sept 2024, 6:00 pmClosed
Garrison Engineer (Central) Pune
Garrison Engineer (Central) Pune, Arjun Marg, Pune-411001
8522 ADDN / ALTN OF EXISTING EASTERN BOUNDARY WALL AT ARMY SPORT INSTITUTE UNDER GE (CENTRAL) PUNE
2024_MES_669034_1
8522 ADDN/ ALTN OF EXISTING EASTERN BOUNDARY WALL AT ARMY SPORT INSTITUTE UNDER GE (CENTRAL) PUNE
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer (Central) Pune
As per tender NIT
9 documents required · 9 mandatory
₹500
Garrison Engineer (Central) Pune, Arjun Marg, Pune
₹69,000
Yes
22 Jan 2025
31 Aug 2024
30 Sept 2024
31 Aug 2024
28 Sept 2024
14 Sept 2024
Amount
Demolition Concrete of any description and in any position not otherwise specifically provided for and removal rubish out site MoD land complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precst concrete articles complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for and removal to store/from site complete all as specified and directed
Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc and removing debris out side defence land complete all as specified.
Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sq m on plan aqnd n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed
M&L for Cutting holes Exc 150sqcm not exc 400 sqcm into or through brick walls,built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete complete all as specified and directed
M&L for PCC 1:4:8 type C-2 (40mm graded agg) is in foundation filling and mass concrete all as specified and directed.
M&L for reinforced cement concrete (Nominal Mix) (20 mm graded aggregates)type B-I as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for reinforced cement concrete (Nominal Mix) (20 mm graded aggregates)type B-Ias in column, pillars, piers, post and struts
M&L for reinforced cement concrete (Nominal Mix) (20 mm graded aggregates)type B-I as in Beams, cantilevers, bressummers ers, lintels over 1.5m span complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending, binding spirally hooping for columns, hooking ends, binding with with mild steel wire (annealed) not less than 0.9mm dia of securing complete all as specified complete all as specified and directed.
Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams, and similar work ; vertical or to batter to rough finished surface of concrete, complete all as specified and directed.
Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete surface square or rectangular or polygonal, complete all as specified and directed
Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers,lintels,cantilevers,helvesincluding sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.
M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 complete all as specified and directed.
M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) in fencing kerbs / coping etc for chamfered angles and throating including required formwork as directed complete.
S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing barbed wire etc) including all necessary drilling, bolting or riveting, embedding in cement concrete, MS flat at bottom etc and similar work confirminng to Fe-290 Gde E-165 complete all as specified and directed.
Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick AZ-150 of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed
M&L for preparation of new or previously untreated steel or iron surfaces of any description over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
M&L for 15mm thick rendering in CM 1:4 over brick /conc wall surfaces and sagol finished for external wall surfaces complete.
M&L for preparation of newly plastered surface wall and applying two coats of cement based paint over a coat of primer of same make over external wall surface complete all as specified and directed
M&L for preparation of old plastered or unplastered surfaces of wall by brooming / wire brushing / removal of loose scales / dusts / unwanted particles manually / mechaincal and applying two coats of cement based paint complete all as directed and specified.
Providing and fixing in repair concertina coil fencing with concertina coil of 600mm dia 10 mtr openable length (totall length 90 m) having 50 nos round per 6 mtr length spring core wire (2.5mm thick ) of high tensile stremgth of 165kg/sq. mm having weight 43.478 gm/m as directed and shon in drwing at all height and level incl necessary fixture tools tackles etc reqd for job completion all as directed and specified.
Supply and fixing in repairgGalvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as directed and specified.
R K CONSTRUCTION AND ENGINEERING (BID ID -3104937)
Santosh Pandurang Pise (BID ID -3104402)
SHREESAMARTH CONSTRUCTION (BID ID -3101926)
Suma Construction (BID ID -3104259)
M/s.BAJRANG CONSTRUCTION (BID ID -3103046)
ANIL CONSTRUCTION CO. (BID ID -3117731)
PRANAV ENTERPRISES (BID ID -3104031)
DURGA CONSTRUCTION & TRANSPORT (BID ID -3104793)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .