REPAIR AND MAINT OF CI/GI AND REPLACEMENT OF OLD CORRODED WATER SUPPLY PIPE LINES SLUICE VALVE, VALVE PIT, AND PERIODICAL MAINT OF WATER SUPPLY AND ELECTRIC SUPPLY INST INDOOR /OUTDOOR AT N AREA AND HALLOMAJRA UNDER GE CHANDIGARH.

Amount

Excavation in trenches in soft/loose soil not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth; for foundation, etc. and getting out complete, all as specified.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each, complete, all as specified.

M&L fine sand (River sand) spread in trenches for cushioning of cable 8mm thick under the cable and 15cm over the cable for protection complete all as specified and as directed.

M&L for old size sub class `B` bricks, kiln burnt, as in cable protection laid flat with axis of brick perpendicular to the axis of the cable complete all as specified and directed by Engineer-in-Charge.

Removing excavated spoil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.

Fabrication and fix mild steel black sheet 6mm thick cofiroming to FE 410-W( Gde-E250 quality) for valve pit chamber cover including cutting,welding, two nos holes,1 No lifting hook and grooting one side with MS fasterner/ Pes in valve pit wall/mild steel frame, provn of locking arrangement and making good disturbed surfaces with same material complete, all as specified.

Tubes 15 mm bore, ‘medium grade’, ISI MARKED, galvanized with all fittings and fixed complete laid in trnches or walls and ceilings or laid in floors, complete all as specified. MAKE : JINDAL, TATA, BST, PRAKASH TUBES, OSWAL.

Tubes 20 mm bore, ‘medium grade’, ISI MARKED, galvanized with all fittings and fixed complete laid in trnches or walls and ceilings or laid in floors, complete all as specified. MAKE : JINDAL, TATA, BST, PRAKASH TUBES, OSWAL..

Tubes 25 mm bore, ‘medium grade’, ISI MARKED, galvanized with all fittings and fixed complete laid in trnches or walls and ceilings or laid in floors, complete all as specified. MAKE : JINDAL, TATA, BST, PRAKASH TUBES, OSWAL.

Tubes 50 mm bore, ‘medium grade’, ISI MARKED, galvanized with all fittings and fixed complete laid in trnches or walls and ceilings or laid in floors, complete all as specified. MAKE : JINDAL, TATA, BST, PRAKASH TUBES, OSWAL.

Tubes 80 mm bore, ‘medium grade’, ISI MARKED, galvanized with all fittings and fixed complete laid in trnches or walls and ceilings or laid in floors, complete all as specified. MAKE : JINDAL, TATA, BST, PRAKASH TUBES, OSWAL.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.

Taking up or down steel tubing 25 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.

Taking up or down steel tubing 40 mm to 50mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.

Taking up or down steel tubing 80 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.

Re-fixing old steel tubes and connections of size 20 mm bore in new or old position (walls, ceilings, floors/trenches etc.) complete all as specified. NOTE: GI tube taken down under serial item No 12 shall be fixed under this item.

Cleaning of old serviceable steel tube and Re-fixing old steel tubes and connections of size 20and25 mm bore in new or old position (walls, ceilings, floors/trenches etc.) complete all as specified. NOTE: GI tube taken down under serial item No 13 and 14 shall be fixed under this item.

Cleaning of old serviceable steel tube and Re-fixing old steel tubes and connections of size 40mm to 50 mm bore in new or old position (walls, ceilings,floors/trenches etc.) complete all as specified. NOTE: GI tube taken down under serial item No 15 shall be fixed under this item.

Cleaning of old serviceable steel tube and Re-fixing old steel tubes and connections of size 80 mm bore in new or old position (walls, ceilings, floors/trenches etc.) complete all as specified. NOTE: GI tube taken down under serial item No 16 shall be fixed under this item.

Cutting existing 15 mm bore, ‘medium grade’, galvanized tubes, for alteration or additions (each cut measured) providing threads etc.complete all as directed by the Engineer- in-Charge.

Cutting existing 20 mm bore, ‘medium grade’, galvanized tubes, for alteration or additions (each cut measured) providing threads etc.complete all as directed by the Engineer- in-Charge.

Cutting existing 25 mm bore, ‘medium grade’, galvanized tubes, for alteration or additions (each cut measured) providing threads etc.complete all as directed by the Engineer- in-Charge.

Cutting existing 40mm to 50 mm bore, ‘medium grade’, galvanized tubes, for alteration or additions (each cut measured) providing threads etc.complete all as directed by the Engineer- in-Charge.

Pig lead good quality complete all as specified

Lead wool good quality complete all as specified

DI pipe 150 mm (certifugally cast) class 'K-9' (ISI Mark) in any length with spigot and socket ends as per is 1536-2001 jointed ie rubber gasket joint and laid in trenches or in any position, complete including taking down any type and size of pipe all as specified Make: Electro Steel/Lanco/Kesoram/Tata

DI pipe 250 mm (certifugally cast) class 'K-9' (ISI Mark) in any length with spigot and socket ends as per is 1536-2001 jointed ie rubber gasket joint and laid in trenches or in any position, complete including taking down any type and size of pipe all as specified Make: Electro Steel/Lanco/Kesoram/Tata

DI pipe 100 mm (certifugally cast) class 'K-9' (ISI Mark) in any length with spigot and socket ends as per is 1536-2001 jointed ie rubber gasket joint and laid in trenches or in any position, complete including taking down any type and size of pipe all as specified Make: Electro Steel/Lanco/Kesoram/Tata

S& F for 100 mm bore mild steel water pipe heavy duty both end flanged as column pipe (each length of pipe 3metre long) as in repair complete all as specified and as directed by Engineer-in-Charge. Make :-JINDAL/PARKASH /SURYA/ SWASTIK

S& F for 80 mm bore mild steel water pipe heavy duty both end flanged as column pipe (each length of pipe 3metre long) as in repair complete all as specified and as directed by Engineer-in-Charge. Make :-JINDAL/PARKASH /SURYA/SWASTIK

CI fittings of size up 150 mm bends ( any radius and angle ) Tapers any type,( straight, bend , increasing,decreasing or double socket etc)Tee pieces single branch. `Y` junction , double branch cross ( all socket or socket and spigot ) collars, caps and plugs etc.,complete all as specified Make: Electro Steel/Lanco/Kesoram/ TATA

CI fittings of size up 200/300 mm bends ( any radius and angle ) Tapers any type,( straight, bend,increasing,decreasing or double socket etc)Tee pieces single branch. `Y` junction , double branch cross ( all socket or socket and spigot ) collars, caps and plugs etc.,complete all as specified Make: Electro Steel/Lanco/Kesoram/ TATA

Rubber gasket joint for 100 mm dia pipe complete all as specified

Rubber gasket joint for 150 mm dia pipe complete all as specified

Rubber gasket joint for 200 mm dia pipe complete all as specified

Run lead joint including replacement of bolts, nuts & washers for 100mm bore CI pipe /joints, fixing and testing after completion complete all as specified .

Run lead joint including replacement of bolts, nuts & washers for 150mm bore CI pipe /joints, fixing and testing after completion complete all as specified .

Run lead joint including replacement of bolts, nuts & washers for 200mm bore CI pipe /joints, fixing and testing after completion complete all as specified .

Construction of valve pit chamber of size 120 x120 x120 cm with brick masonary in cement mortar 1:4, all internal surface to be plastered in cement mortar 1:4 and floor 100mm thick in cement concrete type D-2, 1:4:8 using 40 mm graded crushed stone aggregate, including 6.00 mm thick MS sheet cover fixed with angle iron frame 40x40x6mm thick with locking arrangement and lifting handle including two coat of anti- corrosive synthetic enamel black paint over a coat of red oxide primer to steel surfaces including necessary earth work and PCC copping in cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate complete all as specified

Construction of valve pit chamber of size 90 x90 x90 cm with brick masonary in cement mortar 1:4, all internal surface to be plastered in cement mortar 1:4 and floor 100mm thick in cement concrete type D-2, 1:4:8 using 40 mm graded crushed stone aggregate, including 6.00 mm thick MS sheet cover fixed with angle iron frame 40x40x6mm thick with locking arrangement and lifting handle including two coat of anti- corrosive synthetic enamel black paint over a coat of red oxide primer to steel surfaces including necessary earth work and PCC copping in cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate complete all as specified

Sluice valve PN-1.6 (ISI marked) confirming to IS-14846-2000 with brass/Steel spindle and fly net flanged both ends and drilled for jointing, wheel head type including nuts, bolts, washes & 02 Nos rubber insertion packing etc for 250 mm bore pipe and fixed, IN REPAIRS, complete all as specified. Make: SANT, BIR, LEADER, ZOLOTO, KIRLOSKAR, KARTAR.

Sluice valve PN-1.6 (ISI marked) confirming to IS-14846-2000 with brass/Steel spindle and fly net flanged both ends and drilled for jointing, wheel head type including nuts, bolts, washes & 02 Nos rubber insertion packing etc for 200 mm bore pipe and fixed, IN REPAIRS, complete all as specified. Make: SANT, BIR, LEADER, ZOLOTO, KIRLOSKAR, KARTAR.

Sluice valve PN-1.6 (ISI marked) confirming to IS-14846-2000 with brass spindle and fly net flanged both ends and drilled for jointing, wheel head type including nuts, bolts, washes & 02 Nos rubber insertion packing etc for 150 mm bore pipe and fixed, IN REPAIRS, complete all as specified. Make: SANT, BIR, LEADER, ZOLOTO, KIRLOSKAR, KARTAR.

Sluice valve PN-1.6 (ISI marked) confirming to IS-14846-2000 with brass spindle and fly net flanged both ends and drilled for jointing, wheel head type including nuts, bolts, washes & 02 Nos rubber insertion packing etc for 100 mm bore pipeand fixed, IN REPAIRS, complete all as specified. make: SANT, BIR, LEADER,ZOLOTO, KIRLOSKAR, KARTAR.

Sluice valve PN-1.6 (ISI marked) confirming to IS-14846-2000 with brass/Steel spindle and fly net flanged both ends and drilled for jointing, wheel head type including nuts, bolts, washes & 02 Nos rubber insertion packing etc for 80 mm bore pipe and fixed, IN REPAIRS, complete all as specified. Make: SANT, BIR, LEADER, ZOLOTO, KIRLOSKAR, KARTAR.

Gun-metal, globe or gate valves, ISI marked (IS:778) with iron wheel head, screwed both ends for iron pipe and fixed of size 50mm dia, IN REPAIRS, complete all as specified. MAKE: SANT,BIR, ZOLOTA

Gun-metal, globe or gate valves, ISI marked (IS:778) with iron wheel head, screwed both ends for iron pipe and fixed of size 40mm dia, IN REPAIRS, complete all as specified.MAKE: SANT,BIR, ZOLOTA

Gun-metal, globe or gate valves, ISI marked (IS:778) with iron wheel head, screwed both ends for iron pipe and fixed of size 25mm dia, IN REPAIRS, complete all as specified. MAKE: SANT,BIR, ZOLOTA

Gun-metal, globe or gate valves, ISI marked (IS:778) with iron wheel head, screwed both ends for iron pipe and fixed of size 20mm dia, IN REPAIRS, complete all as specified. MAKE: SANT,BIR, ZOLOTA Note : Fixing cost of item No 45,46,47& 48 deemed to be included against item No- 50 ,51,52,53&54 herein after

Cast iron Non return valve of 150 mm dia with provn of two end spoigot and socket suitable for rubber tyton joint and one end flanged fixed with removable MS plate incl ,rubber gas kit,nut,bolt ,washers,and making suitable fixing arrangement to spoigot and sockete DI 200 MM dia pipe etc complete all as specified . Make: SANT, BIR, LEADER, ZOLOTO, KIRLOSKAR, KARTAR. Note : Fitting will be measured and paid separetly, if any, required.

Arresting of water leakage from existing pipe line in position from DI/CI/GI pipe of size 150 mm to 300 bore ,including excavation through Men/Mechanical power ,cutting,welding as per site requirement,jointing material such as lead joint/gaskit joint/CI fitting, nut and bolts,washers and refilling etc complete all as specified . Note:- (i) Excavation up to 1x1x6 Mtr will be deemed to be included in quoted rate. (ii) Jointing material ( such as pig lead, DI / CI fitting and pipe length) will be measured and paid separately under appropriate item of sch 'A' herein.

Arresting of water leakage from existing pipe line in position from DI/CI/GI pipe of size 150mm bore ,including excavation through Men/Mechnical power ,cutting,welding as per site requirement,jointing material such as lead joint/gaskit joint/CI fitting, nut and bolts,washers and refilling etc complete all as specified . Note:- (i) Excavation up to 1x1x6 Mtr will be deemed to be included in quoted rate. (ii) Jointing material ( such as pig lead, DI / CI fitting and pipe length )will be measured and paid separately under appropriate item of sch 'A' herein.

Arresting of water leakage from existing pipe line in position from DI/CI/GI pipe of size 80mm to 100 bore ,including excavation through Men/Mechnical power ,cutting,welding as per site requirement,jointing material such as lead joint/gaskit joint/CI fitting, nut and bolts,washers and refilling etc complete all as specified . Note:- (i) Excavation up to 1x1x6 Mtr will be deemed to be included in quoted rate. (ii) Jointing material and pipe length will be measured and paid separately under approriate item of sch 'A' herein.

Arresting of water leakage from existing pipe line in position from GI pipe of size 40mm to 50mm bore ,including excavation through Men/Mechnical power ,cutting threading,welding as per site requirement, incl jointing material such as GI (Bend,socket,reducer,tee,funel, union ,solution,thread etc) and refilling etc complete all as specified . Note:- (i) Excavation up to 1x1x6 Mtr will be deem to incl in quoted rate. More excavation will be measured and paid saperately. (ii) Pipe length will be measured and paid separately.

Arresting of water leakage from existing pipe line in position from GI pipe of size 15mm to 25mm bore ,including excavation through Men/Mechnical power ,cutting threading,welding as per site requirement, incl jointing material such as GI (Bend,socket,reducer,tee,funel, union ,solution,thread etc) and refilling etc complete all as specified. Note:- (i) Excavation up to 1x1x6 Mtr will be deem to incl in quoted rate. More excavation will be measured and paid saperately. (ii) Pipe length will be measured and paid separately.

Locating blockage in existing distribution pipeline 80mm dia any type in position by excavation work manualy in any type of soil upto 750x500mm upto max 2Mtr length at various location ( Maximum up to 3 location ) incuding necessary cutting/threading/welding work & provision of required size of fittings such as union/socket 1no ,replacement of damaged pipeline,returning filling and removal of surplus soil complete all as specified . Note :- (i) Pipe length will be measured and paid separately under approriate item of sch 'A' (ii) Contractor shall restore supply system within in 8Hrs.

Locating blockage in existing distribution pipeline 40/50mm dia any type in position by excavation work manualy in any type of soil upto 750x500mm upto max 2Mtr length at various location ( Maximum up to 3 location )incuding necessary cutting/threading/welding work & provision of required size of fittings such as union/socket 1no ,replacement of damaged pipeline,returning filling and removal of surplus soil complete all as specified . Note :- (i) Pipe length will be measured and paid separately under approriate item of sch 'A' (ii)Contractor shall restore supply system within in 8Hrs.

S&F 100 mm bore cast iron Air release valve with two air outlets complete with fixing arrangement, as in repair complete all as specified and as directed by Engineer-in-Charge. Make : KIRLOSKAR / SANT / BIR

Comprehensive maintenace,Repair/servicing of 06 Nos RO water purifier of cap upto 25 LPH capacity of & 4x RO water purifier 500LPH capacity of any MAKE installed at various location at N area And Hallomajra as per undermentioned detail. i)contractor has to provide one service each month by qualified technician.ii) All complaints shall be attended on the same day.iii) Repair to motor,mpv panel,flow meter and membrane cleaning,replacement of micron /sand/carbon filter ,or any other minor spares and propriotory material ie. Descaling solution, salt etc. will be covered under above item rate.

Supply and replace RO Membrane suitable for 500 LPH capacity of plant as per existing make and size

Supply and replace JUMBO filter suitable for 500 LPH capacity of plant as per existing make and size

Supply and fix in repair eletric driven single phase 230 volts 50 HZ raw water pump for flow rate 1200 LHP @ 3.5Kg sqcm pressure Make CRI/Texmo or equivalent

Spply and fix in repair electric driven single phase 230 volts 50 Hz high pressure pump set 2 HP automatic grade with stainless steel body SS 304 suitable for for discharge 1200 ltr /hr and maximum pressure 12 bar. Pressure : Make : CRI/Texmo or equivalent

Supply and fix in repair float switch (Low &High) for RO plant of cap 500 LPH

Supply and fix in repair Mulitiport valve 25 NB fully automatic for RO plant of cap 500 LPH

Supply and fix in repair Auto control panel with low pressure switch for RO plant of cap 500 LPH

Supply and installation of water purifier having (RO+UV) with the following feaures. Digital advance alert system, Purity indicator, TDS modulator Storage cap -10 Ltrs. Filtration rate: 15 Ltrs per hrs. Make : Aquaguard/KENTor equivalent as approved.

Supply, Installation, Testing and Commissioning of 150 mm dia, single phase, Motor Actuated Butterfly valve with following specification complete including cutting of existing CI pipe 150 mm dia and making necessary arrangement for installation of butterfly valve complete inclcuding provision of electrical connection : a)Designed Line Pressure : 10 kg/sqcm b)Operating Angle : 90 degrees c)Disc Material : CI with nylon coating d)Limit Switches : 02 nos. for Open & Close e)Mounting : Splash Proof - Direct on Valve f) Input Supply : 230V AC, 50 Hz g) Manual Operation : Hand Wheel h) In built Serial / USB communication Port i) In built data logger with memory j) In built SD Card k) Space Heater Make: Ritetork/Emtork /Rotork/Rapid/MAI

Supply, Installation, Testing and Commissioning of 100 mm dia, single phase, Motor Actuated Butterfly valve with following specification complete including cutting of existing CI pipe 150 mm dia and making necessary arrangement ffor installation of butterfly valve : a)Designed Line Pressure : 10 kg/sqcm b)Operating Angle : 90 degrees c)Disc Material : CI with nylon coating d)Limit Switches : 02 nos. for Open & Close e)Mounting : Splash Proof - Direct on Valve f) Input Supply : 230V AC, 50 Hz g) Manual Operation : Hand Wheel h) In built Serial / USB communication Port i) In built data logger with memory j) In built SD Card k) Space Heater Make: Ritetork/Emtork /Rotork/Rapid/MAI

Supply laying and connecting 4 Core 1.5sq.mm. PVC sheath PVC insulated copper armoured cable. Make : HAVELLS/NICCO/PLAZA/POLYCAB

Supply laying and connecting 2 Core 1.5sq.mm. PVC sheath PVC insulated copper armoured cable.Make : HAVELLS/NICCO/PLAZA/POLYCAB

S& F for as in repair PVC insulated ,unsheathed copper conductor cable 16 Sq mm ,3 core , flat in shape suitable for submersible pump motor complete all as specified and as directed by Engineer-in-Charge. Make : KALINGA / FINOLEX / PALAZA / HAVELLS

Supply and Installation of commercial Reverse Osmosis Water Purifier System of capacity 50 LPH complete with internal pipelines including Warranty and free on site services for period of One year from date of Installation. Make : RENUKA WATER TECHNOLOGIES / Equivalent as approved by GE.

Supply and installation in repair submersible pump set eletric driven 415 volts three phase suitbale for 250/200 mm dia bore well and 100 mm delivery with brass impellers having disscharge not less than 15 LPS at 145 mtr head complete with suitable type and capacity submerible 3 phase eletric motor : Make KIRLOSKAR/CRI/Jyoti - Loc : Hallomajra , N Area .Note : Old unsv pump set shall be deposited in MES store yard of' N 'area

S&F Rotational moulded polye- thylene water storage tanks of cap 1000 Ltrs triple layer (cylindrical vertical with closed top) hoisted and fixed in position complete including 25mm float valve specified in SSR Part I

S& F for 65 mm bore mild steel water pipe heavy duty both end flanged as column pipe (each length of pipe 3metre long) as in repair complete all as specified and as directed by Engineer-in-Charge. Make :-JINDAL/PARKASH /SURYA/SWASTIK

M&L cast iron pipe 150 mm bore with flanged end certifugally cast class class 'B' in any length to be laid/fixed as rising/delivery main with RCC OH Tanks of height up 21 mtrs complete including rubber gasket, nuts bolts, washers and taking down old unsv CI pipes. all as specified. Make: Electro Steel/Lanco/Kesoram/Tata

M&L cast iron pipe 100 mm bore with flanged end certifugally cast class class 'B' in any length to be laid/fixed as rising/delivery main with RCC OH Tanks of height up 21 mtrs complete including rubber gasket, nuts bolts, washers and taking down old unsv CI pipes. all as specified. Make: Electro Steel/Lanco/Kesoram/Tata

Cutting the existing road of 0.30m width and 0.60m depth for laying DI/GI GI pipe with all fittings such as bends, sockets, reducers union etc, complete incl excavation in any type of soil, rfr , removal and PCC 1:2:4 of 15 cm below the GL for making the the road cut portion good all as directed and specified

Supply and filling of calcium based granular (Calcium hypochlorit granular) disinfectant for Chlorination of water having more stable than chlorine gas and contains no mercury, no heavy metal contamination, supported with test certificate, specified. Brand Name Puri chlor. M/s BM Aqua Tech Pvt Ltd (Mark “ Baxer” brand)/ (Rayalseema/ M/s Grasim Industries Ltd Chemical Division / Declibac Tech Kolkata or any product approved by E-in-C’s Branch.

Material and labour for spreading and levelling stone aggregate 63 mm 150 mm average thickness around transformer , two pole/four pole structure including removing of grass and bushes from roots of the area

M & L continous brick edging with sub class B bricks of old size laid with width equal to the width of the brick, laid dry on end vertically complete all as specified and as directed.

Cleaning the area of electric /water supply outdoor/ indoor installations by cutting and removing jungle sturts, roots, bushes plants small trees etc and deposited to n.exc 50 mtr to 100 mtr out side installations complete all as specified and as directed by Engr-in-Charge.

S&F in repair rolled mild steel duct cover made out 7 mm thick of plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, handle with riveted, bolted or welded attachment conforming to Fe 410-W(Gde-E-250) quality-A complete all as specified and directed by Engineer in charge.

Taking down old U/S any type of sign board fro any position and M& L for Informatory Glow sign board size 2.00mtr x1.50mtrx 25cm made out of 1mm thick aluminium sheet frame box type fixed on M.S angle iron frame of size 50x50x6mm thick with back support Rightangle triangle type with same size of angle fixed to roof/wall with nut and bolts etc.including 1mm thick acrylic sheet diffused type fixed on one side of frame ,letter writing (50 to 75 words),logo/drawing etc. made with computerized added of fully retro reflective high intensity prismatic sheet pasted on board and 4Nos LED tube light fitting 20 watt completet with necessary accessories,& pre-wired complete all as specified and directed by the Engineer-in-charge.Note : (i) The letter size of Main heading shall be minimum150mmx15mm and sub heading letter size shall be minimum 100mmx10mm.(iii) The drawing and colour of writing work shall be got approoved by Engineer in charge.

M& L for Informatory sign board of size 1000mm x600mm made out of 2mm thick aluminium sheet fixed on Chromium plated Stainless steel Pipe frame of 50mm Dia, 2.25mtr long vertical member and 40mm Dia 1.30mtr horizontal member ,including letter writing (100 to 150 words) , logo/drawing made with computerized printing of fully retro reflective with high intensity prismatic tape pasted on sheet with single side writing including frame emmebedded in 0.30x0.45mtr in PCC (1:3:6 ) type C-1 complete all as specified and directed by the Engineer-in-charge Note : (i)The cost of Excavation post hole, earth work , PCC for foundation etc shall be deemed to be included in the unit rate of this item. Nothing extra shall be admissible on this account.(ii) The letter size of Main heading shall be minimum100mmx10mm and sub heading letter size shall be minimum 50mmx5mm.(iii) The drawing and colour of writing work shall be got approoved by Engineer in charge.

Supply and fixing LED type solar street light fitting with following features/specification:- 1. Luminaire:- Aluminium housing LEDs for light source optics with high effeciency driver & MPPT charge controller, Excellent heat dessipation IP 65 protection, High birghtness and high efficiency of more than 120 lm/W new age LEDs, individual peanut optical lenses for uniform light distribution system output: 2200 Lm. 2. Solar Panel:- Polycrystaline solar cells. 3. Battery:- Tubular construction, 12 V 100 AH, 75% depth of discharge, galvanised battery box 3 days autonomy, long life, weather proof, long back-up ideal for cloudy conditions. 4. Pole:- Galvanised pole, Rigid and safe, corrossion free length 5/6 mtr. With optimum thermal management and heat sink design and microprocessor based charge controller and led driver maximizes the performance of panel & battery. Cat part No : BRP 402 make philips Minigreen 21 Watt.

S&F in repair Decorative LED 30watt Post top lantern luminaire with diffuser and painted aluminium deflector complete including taking down existing any type of lantern and connecing up with suitable size of copper flexible cable.LED30 WATT as per cat no LTGL30-24X1HPLED MAKE-C&S/BAJAJ/PHILIPS

S&F for PVC insulated aluminium conductor 1100 volts grade heavy duty cable, served with inner sheathed of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable flat or circular of size 2 core 10 Sqmm complete all as specified and as directed by Engineer-in-Charge.

All as per above item No 90 here-in-before but 6Sqmm

S&F street light bracket made out of 40mm dia, 1.50 mtr long GI tubing, "medium grade" ISI marked, bend into required shape and at an angle as site requirement and including M&L for MS clamps size 32 x 6mm for fixing street light fittings and bracket including nut, bolt and washers duly painted with two coats of aluminium paint over a coat of red oxide primer including taking out existing rusted GI bracket complete all as specified and as directed.

Trimming of tree branches and vegetation along LT OH line and near to pole 2 Mtr clearance on either side complete all as specified and as directed by Engr-in-Charge

S & Laying for XLPE insulated , screened , PVC.bedded galvanized steel strip or wire armoured electric power cables ( heavy duty ) with aluminium conductot ,1100 volt grade , cross sectional area 10 Sq mm , 2core laid in trenches after taking down old u/s cable any complete all as specified and as directed.(Note :- Excavation, earth work, brick protection, sand cushion & GI pipe shall be measured & paid separately)

S & Laying for XLPE insulated , screened , PVC.bedded galvanized steel strip or wire armoured electric power cables ( heavy duty ) with aluminium conductot ,1100 volt grade , cross sectional area 25 Sq mm , 4core laid in trenches after taking down old u/s cable any complete all as specified and as directed. (Note :- Excavation, earth work, brick protection, sand cushion & GI pipe shall be measured & paid separately)

M & L for MCCB, TPN, 400 Amp, 415 volt ,Adjustable type thermal magnetic release breaking capacity 36 KA as in repair complete all as specified and as directed by Engineer-in –charge.

M & L for MCCB, TPN, 250 Amp 415 volt ,Adjustable type thermal magnetic release breaking capacity 25 KA as in repair complete all as specified and as directed by Engineer-in –charge.

M & L for MCCB, TPN, 200 Amp 415 volt ,Adjustable type thermal magnetic release breaking capacity 25 KA as in repair complete all as specified and as directed by Engineer-in –charge.

M & L for MCCB, TPN, 160 Amp 415 volt ,Adjustable type thermal magnetic release breaking capacity 36 KA as in repair complete all as specified and as directed by Engineer-in –charge.Make :--- C&S/INDOASIAN( GOLD PLUS) / ABB / HAVELL’s / LEGRAND. Note for item : Make and frame size of the new MCCB should be as per the existing unsv MCCB so that new MCCB can be fixed and connected properly in the panel

Supply & Fix as in repair incl testing and Commissioning of dozing pump high pressure single head, adjustable dozing pump and high pressure range 0 to 12 Kg/ Sqcm , Power 230 volts, 50 Hz, 44 RPM 1/30 HP functional output adjustable up to 17 Ltrs / hrs (Max pressure) self priming with vertical or Horizontal mounting type Make Varima model No VDP1217 /Aquafit any product approved

S&F FASDS suitable for 40 HP Submersible electric driven pump set ,3 Phase , AC 415 volt ,50 HZ with MS enclouser with Std proction ie single phase, over volt /under volt etc complete Make : BCH/Seimens/scheneider/havells

S&F FASDS suitable for 15 HP Non clog Submersible electric driven pump set ,3 Phase , AC 415 volt ,50 HZ with MS enclouser with Std proction ie single phase, over volt /under volt etc complete Make : BCH/Seimens/scheneider/havells

Supply, fixing connecting and testing Motor protection unit(MPU) three phae 415 volt , 50 HZ ,automatic phase sequence corrector automatically correct inut reverse phase, single phase protection, LV, HV, LIV, Auto of loft, timer, Dry running under & over current, unbalancing ,float switch with built in CTs (Automatic-RTM ) complete all as specified. & directed

Disconnecting and taking down carefully old UNSV/ non functional aviation light fitting of any pattern any description and in any position complete and supply, installation, commissioning and testing on over head reservior new LED aviation obstruction lights, comprising of die cast aluminium alloy housig, finished in avaitation yellow colour, polycarbonate enclosures in red colour , with and including 302 Nos LED and accessoried complete all as specified and directed cat part No BGAV 302 LED of BAJAJ Note : Rate for any preparatory works, T&P and other resources reqd for dismantling /repair/ fixing of aviation obstruction light, air termination rod etc on the top of OHR at the height of 20 to 25 m from Ground level is deemed to be included in the scope of above item.

Taking out carefully with out damaging electrical equipment inside sub stn building , mild steel sheet gate shutter -02 nos. Reparing of the same by providing/welding suiable size and nos of hinges or other fixing arrangment such bearing so that the hinges or the bearing can hold the weight of the gate in still position as well as in moving position incl making necessary locking arangement . Painting of th gate with two coats of synthetic enamel paint over a coat of red oxide as primer. Loc : hallomajra Sub Stn

Taking down copper /aluminum point wiring (light,fan,socket or power ) complete, including fixture and fitting such as switches,ceiling rose ,holders regulators,sockets any type light fitting etc for taking credit,removing from site of work and making good to the disturbed surfaces of walls/floors etc complete all as specified and as directed by Engineer - in -Charge.

Taking down carefully sub main wiring any sizes and runs including PVC conduit etc and making good to the disturbed surfaces of walls/floors etc complete all as specified and as directed by Engineer - in -Charge.

M&L for Point wiring with copper conductor, single core, PVC insulated, unsheathed stranded FRLS cable (IS 694), including PVC insulated copper multi-stranded conductor cable, unsheathed, of size 1.5 sqmm and one single core earth continuity multi-stranded conductor size 1.5 sqmm green in colour to common earth and connecting to earth dolly with copper crimp of suitable size and including PVC casing caping with accessories on walls/ Ceiling / floor etc., including MS box 1.6 mm thick with 3mm hylem sheet cover for fixing of switches/sockets/fan regulators etc, complete all as specified for One light point controlled by one switch 5 Amp SP one -way

All as per item No 108 above but One fan point controlled by one switch 5 Amp SP one -way

All as per item No 108 above but One 3 pin socket outlet point 5 Amp on same board .

All as per item No 108 above but One 3 pin socket outlet point 5 Amp on independent board.

All as per item No 108 above but but wiring with 2.5 Sqmm nominal area cable for 15 Amp socket outlet three pin Independent point with 2.5 Sqmm copper conductor for earthing (green colour).

All as per item No 108 above but but wiring with 4.0 Sqmm nominal area cable for 15 Amp socket outlet three pin Independent point with 4 Sqmm copper conductor for earthing (green colour).

S&F in repairs ceiling rose surface bakelite 65x50mm three terminals complete all as specified ISI marked.

S & F in repairs one way switch piano flush type 230 Volt, single pole, 5 Amps, ISI marked,complete all as specified.

S & F in repairs socket 2 pin 5 Amps, 3 pin 5 Amps flush type, 230 volt single pole, (ISI marked), complete all as specified.

S&F in repairs switch Pino flush type 15 Amps 230 volt, (ISI marked) complete all as specified.

S & F in repairs multi socket 2 in 1, 3 pin 5 Amps and 3 pin 15 Amps 230 volt, (ISI marked), complete all as specified.

S & F in repairs fan regulator flush electronic step type Any modle complete all as specified

S&F of sub main wiring with two single core 4 sqmm and one single core 2.5 sqmm as earth continuity cable PVC insulated multi-straned copper conductor drawn through in and including PVC rigid no-metallic surface/concealed conduit of 25mm dia and connection at both ends with copper legs, colour code for phase Red /Yellow/Blur for neutral Black and for earth green, complete all as specified

S&F in repair tube light fitting Box type made of CRCA sheet 18 To20 Watt, including 1 x 18 To 20 watt retro LED tube rods and pre-wired with high efficiency electronic driver and connecting with three core PVC copper flexible cable of size 23/.0076 from ceiling rose to connector block complete all as specified.

S&F in repairs batten holder bakelite complete with LED lamp 10 watts (Cool light) all as specified (ISI Marked).

S&F in repairs LED light fitting 1x10 watt bulk head luminaries with opel diffuser 10 watt LED IP 65 ,230V 50 Hz.

S &F energy saving LED Flood light 150 to 160 watt luminaire with high power LEDs lens of beam angle of 120 degree,luminaire made of pressure die cast aluminium body with built in heat sinks, enclosed with toughened glass including separate compartment for cable and incl sealed /compact driver for easy access during maintenance,suitable for operating on voltage 120 - 270 volt,AC,50 HZ,covered with inbuilt surge protection device having maximum discharge surge current( Imax) -10kA (8/20 µs) ,Nominal discharge surge current ( In)-5kA (8/20 µs) and protection level (Up) upto 10 kv , out put Luminous efficacy not less then120 Lumen/Watt , CRI more then 70, conforming to IP 66, protection class 1 complete all as per Manufacturer's specifications and including necessary fixing arrangment, complete all as directed by Engr-in-Charge. Make :- Philips / Bajaj / Osram/ C&S/CG/Halonix

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 4 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting as in repair complete all as specified and directed.

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 8 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting as in repair complete all as specified and directed.

S&F MCB single pole ISI marked ISI Marked `B' series working on 240 Volts 50 HZ AC supply for incomming and out going controlling cercuit of capacity 6-32 Amp breaking capacity 10 KA as in repair etc all as specified and directed.

S&F MCB single pole and neutral ISI marked `B' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 40-63 Amps 10 KA breaking capacityas in repair etc all as specified and directed.

S&F MCB triple pole and neutral ISI marked `B' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 40-63 Amps 10 KA breaking capacity as in repair etc all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-charge

Surface dressing in hard/dense soil n exc 15 cm deep , levelling and site clearence for electric instalations area and water supply installation .

Hardcore of guage n. exc 63mm , broken brick bats deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rolled/rammed to a true surface all as directed by Engr in charge.

M & L for 100 mm thick PCC (1:4:8) type D-2 using 40mm thick crushed stone aggregate as in sub base complete all as specified and as directed by Engineer-in-Charge.

M&L for 100 mm thick PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate laid in alternate bays, each bay n. exc 2.5m in length as in PCC path , finishing cement concrete surface even and fair without using extra cement including fillings of joints with bitumen grade 85/25 complete all as specified and as directed by Engineer-in-Charge.

M & L for 75mm thick PCC (1:4:8) type D-2 using 40mm thick crushed stone aggregate as in sub base complete all as specified and as directed by Engineer-in-Charge.

M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate laid in alternate bays, each bay n. exc 2.5m in length as in plinth protection, finishing cement concrete surface even and fair without using extra cement including fillings of joints with bitumen grade 85/25 complete all as specified and as directed by Engineer-in-Charge.

Dismantling old unserviceable paver blocks any thickness

M & L for machine pressed 60mm thick pre-cast cement concrete( Design Mix-35 ) inter locking tiles any colour and shape ( confirming to ISI-15658-2006) bedded over 50 mm thick sand cushioning and joint filled with sand complete all as specified and directed by Engineer-in-charge

All as per item ser No 138 bove but of size 80 mm thick

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick over and including 20 mm thick screed bed in cement mortar 1:6 set, jointed and pointed in neat cement slurry in floors

M&L for Non skid Ceramic coloured/printed 7to 8 mm thick(square rectangular ) area of each the exceeding 0.11sqm but not exc 0.18 Sq m laid as in floors, setting and jointed with cement slurry bedded over & including 15mm thick bedding of layer of cement sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed by Engineer-in-charge . Make : KAJARIA/ORIENT BELL / JOHNSON.

M&L for Non skid Ceramic coloured/printed 7to 8 mm thick(square rectangular ) area of each the exceeding 0.06 sqm but not exc 0.11 Sqm laid as in floors, setting and jointed with cement slurry bedded over & including 15mm thick bedding of layer of cement sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed by Engineer-in-charge . Make : KAJARIA/ORIENT BELL / JOHNSON.

M&L for Glazed ceramic coloured/printed tiles of size 350x250x7-8/ 300x450x7-8 mm thick set & jointed with neat cement slurry over & including 10 mm thick rendering of cement sand mortar (1:4) and pointed with coloured cement to match with surface of tiles as in skirting/dado complete all as specified and as directed by Engineer-in-Charge. Make : KAJARIA/ORIENT BELL/JOHNSON/SUNHEART/ASIAN

Dismantling posts or struts ( wood ,steel or RCC) any section , including taking out embedded portion and making good to disturbed ground embedded in natural ground complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling fencing wire mesh, any type

M&L for Mild steel work of angle iron section or any section as in posts & struts for cattle/security fencing/ including cutting top to shape, drilling holes, notching for wires etc, flat iron fillets (for securing wire mesh etc) including 12 mm dia round running bar as in fencing post, including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-w( GraeE-250quality –A) complete all as specified and as directed by Engineer –in- charge

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 →→

Supply only chain link MS galvanized fencing of 3.15mm dia wire and any size of mesh size (pitch of wire) as directed by Engr-in-charge complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Taking down cement plaster on brick or concrete or stone wall surfaces including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed by Engineer-in-charge

15mm thick cement plaster with cement sand mortar (1:6) on fair faces of brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.

15mm thick cement plaster with cement sand mortar (1:4) on fair faces of brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in roof kerbs , benching etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Demolition of brick tiles or terracing tiles single layers as on roof including any treatment complete all as specified and as directed.

Demolition of mud of any thickness including plastering and leeping whether full thickness removed or only a part there of(average depth 80 to 100 mm) complete all as specified and as directed.

M& L for 50 mm average thick cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in roof padding finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L Providing & laying 3mm thick APP (Atactic poiypropylene polymer) modified prefabricated five layer, weight not less than 3.60 Kg/sqm water proofing membrane, black finished, reinforced with non-woven polyster matt make as approved, consisting of a coat of bitumen primer @ 0.40 Ltr/Sqm by the same membrane manufacture, of density 0.87 to 0.89 Kg/ltr at 25 degree C temperature and viscosity 70-160 cps. Over the primer coat, the layer membrane shall be laid using butane torch and sealing all joints etc after preparing the surface complete as per standard practise as per manufacturer`s instructions. The vital physical and chemical parameters of the membrane shall be as under :- (i). Joints strength in longitudinal and transverse direction at 23 degree C as 650 /450N/5 Cms. (2) Tear strength in longitudinal and transverse direction as 300/250/5 Cms. Softening point of membrane not less than 150 Degree C. Cold flexibility upto 20 degree C when tested in accordance with ASTM (D-5147). (3) The Laying of membrane shall be got done through the authorized applicator of manufacturer of membrane only.

M&L for applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces

Laying only 40 mm thick old brick tiles laid and bedded in 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement including cleaing of old brick tiles for re-use.

M&L for 40mm thick brick tiles laid cement mortar 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed.

S&F in repair for Galvanized, two strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc complete all as specified and directed by Engineer-in-Charge (Each line of wire to be measured).

Restraining , resecuring incl making good staples of Galvanized, two strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs complete all as specified and directed by Engineer-in-Charge (Each line of wire to be measured).

Preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint ( Ist quality) over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge. Make : NEROLEC/ASIAN/BERGER.

Preparation of old steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint ( Ist quality) complete all as specified and directed by Engineer-in-charge. Make : NEROLEC/ASIAN/BERGER.

Preparation of new wooden surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint ( Ist quality) over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge. Make : NEROLEC/ASIAN/BERGER.

Preparation of old woodenl surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint ( Ist quality) complete all as specified and directed by Engineer-in-charge. Make : NEROLEC/ASIAN/BERGER.

S&F for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

S&F bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe and fixed complete all as specified and as directed.

S&F for stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for 15mm bore iron pipe or for union and fixed complete all as specified and as directed.

S&F for 45cm long, 15mm bore low density polythene pipes or pressure rating 6 kg/Sq cm including two PTMT union to connect iron to ploythene connection pipe complete all as specified and directed by Engineer-in-charge.

S & F for PVC flushing cistern of 10 ltr capacity valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including flush pipe of 32mm bore MS chromium plated and connection to pipes etc complete all as specified and directed by Engineer-in-charge. Make : HINDWARE/CERA/PARRY WARE Note :- Colour of flushing cistern shall be match with the wash down closet pan.

Taking down chowkhats or frames (without taking off shutters from the frame) not exc. 1.5 sq. m each

Taking down chowkhats or frames (without taking off shutters from the frame) exc. 1.5 sq m but not 4 sqm each

S&F Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

M&L for Pressed steel frames of size 165 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified and directed by Engr in charge

M&l for Glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass,gauze, etc. (without sash bars,framing plain,edges of framing plain chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; of shutters as sizes of me-mbers specified in SSR PartI, Section 8, clause 8.24 (a); supplied and fitted to chowkats

M&L for Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including tang down old wire mesh.

Supply and fix in repair Mild steel barrel tower bolts 150mm long stove enamelled black, with bright bolt and fixed

Mild steel sliding door bolts,300mm long plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

M&L for Butt hinges 100mm, heavy weight, cold rolled mild steel, including fixing hardware.

M&L for Mild steel pressed handles 150mm, oval type, stove enamelled

M&L for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay,complete with glazing bars,dovetailed or welded

M&L for sheet glass,Sheet glass3mm thick,ordinary and glazing with oil putty in square mtr exc 0.5 sq. in each pane

S&F steel rolling shutters, with out ball bearing, as specified including top cover, an- choring rod, hasp and staple and one shop coat of primer; erected in position as indi- cated, complete: push pull or manual type incl demolation of unsv roling shutter

M&L for preparing surfaces and applying 2 coats of colour washing on new surfaces of walls

M&L for preparing surfaces and applying 2 coats of colour washing on old surfaces of walls

M&L for preparing for old plastered surfaces and applying 2 coats of cement base paint on walls

M&L for distempering on old surface of walls with oil emulsion distemper in 2 coats complete.

M&L preparing plastered or unplastered surface by washing with bio wash using 10 % bleaching powder in water, applying acrylic primer and applying two coats of plastic emulsion external weather proof complete all as specified and as directed.

Precast RCC type B-1 (1:2:4), using 20 mm graded crushed stone aggregates landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including all mouldings but excluding frame, set in cement mortar 1:4 complete all as specified. incl foam work and demolation of RCC Note :- Reinfrocement shall be measured & paid separetly.

MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed ) not less than 0.9 mm dia all as directed and specified.

Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for Brick work with sub class‘B’ bricks,straight or curved on plan exc 6m mean radius, built in cement mortar 1:6

LONGIA ENGINEERS

M/s badrinath Traders

Arun enterprises

GS Engineers

M/s Super Trading Corporation

His Construction Company