SPECIAL REPAIRS TO CPOS MARRIED ACCOMMODATION BLDG NO P 30 AND P 31 AT INS CHILKA

Amount

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) and including making good for removal portation complete all as specified and directed

All as per item No.1 above but exc.1.5 Sqm and not exc. 4 Sqm each.

Dismantling of RCC Jallies of any thickness and size and including disposal of unserviceable materials out side the MD land complete all as specified and directed.

S&F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Taking down, easing, adjusting and refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in same opening and refixing builders hardware as required including renewal of unserviceable screws etc complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F 35 mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass etc.; sizes of members of shutters as specified in SSR Part - I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and directed

S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F standard aluminium door seal with nylon brudh (minium length 1.2 m) at lower side to fit at the bottom of door shutter with necessary screws complete all as specified and directed.

S&F door eye or magic eye security device for entrance door complete all as specified and directed

S&F magnetic catch latch for cup board complete all as specified and directed

S&F 300 mm MS ordinary rat tail rod pattern springs and including roller and roller plate complete all as specified and directed

S&F flat iron for hold fasts complete all as specified and directed.

S&F second class hard wood small fittings such as brackets of any type, shaped door and window stops and the like including all necessary labour; articles not exceeding 200 Cucm each complete all as specified and directed.

S&F 50 mm medium weight, cold rolled mild steel butt hinges complete all as specified and directed.

M&L 18 mm thick plywood, grade BWR type BB fixed with screws to timber frame work as in cub boards etc, complete all as specified and directed.

M&L 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

M&L extra over rates of block board or particle board for external teak wood lipping 6 mm thick fixed with nails for 18 mm thick board complete all as specified and directed

S&F 75 mm long brass handles cast type, polished bright complete all as specified and directed

S&F 100 mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet. Stile and rails feathered at edges to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed

S&F 100 mm medium weight, cold rolled mild steel butt hinges complete all as specified and directed.

S&F 150 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

All as per Sl. Item No. 25 above but 125 mm

S&F 150 mm aluminium handles, cast type, anodised complete all as specified and directed.

All as per Sl. Item No. 27 above but 125 mm

S&F 140 mm length floor door stopper of aluminium alloy body and tougue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

M&L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coast of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for roof treatment including the following complete all as specified and as directed:- (i) Taking out of existing water proofing treatment and including padding, cleaning the surface using wire brush, brooming down and washing down with water to remove dust etc, and brushing with neat cement slurry @ 3.00 kg of cement per Sqm. (ii) 15 mm thick screed bed in CM 1:4 on surface mixed with WPC as per manufacturers instructions. (iii) Cleaning of plastered surface and applying one coat of oil based bituminous primer conforming to IS -3384 (latest) @ 0.30 Ltr / Sqm.

(iv) Supply and laying 3 mm (Minimum) thick APP based polymeric membrane of approved manufacturer with weight not less than 3.80 Kg per Sqm, reinforced with non-woven polyester fabric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 30 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (v) Applying one coat of bituminous aluminium primer @ 0.1. Lit / Sqm. Note :- (a) Primer, APP membrane & bituminous aluminium paint shall be of same manufacturer and executed through applicator authorised by the approved manufacturer only. (b) Membrane shall be laid with side overlap of 100 mm and end overlap of 150 mm as per manufacturers instruction. (c) WPC will be measured and paid seperately.

Supply only water proofing compound.

M&L PCC 1:5:10 type E2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete and including demolition complete all as specified and directed

M&L 40 mm thick cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in sunken floor complete all as specified and directed

M&L 15 mm thick cement plaster in CM 1:3 on roof slab finished even & smooth using extra cement mixed with water proofing compound complete all as specified and directed. NOTE: WPC shall be measured and paid separately

M&L preparation of sunken portion slab surfaces by applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per Sqm and including cleaning surfaces complete all as specified and directed.

M&l preparation of sunken portion slab surfaces by APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.

S&F 40 mm bore Galvanized Steel tubes, medium grade fixed to walls and for spout in sunken treatment complete all as specified and directed.

M&L brick work with fly ash bricks, straight or curved on plain exc. 6 m mean radius built in cement mortar 1:6 and including demolition complete all as specified and directed.

M&L brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 and including demolition complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, complete all as specified and as directed.

All as per Sl. Item No. 42 above but 15 mm

S&F 20 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.

All as per Sl. Item No. 44 above but 15 mm

Refixing 20 mm bore old steel tubing and connections in new or old position on wall / ceiling / floors etc. complete all as specified and directed. Note:- Serviceable quantity obtained from taking down shall be reused under this item.

All as per Sl. Item No. 46 above but 15 mm

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor and of plaster of wall by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

S&F 7 to 8 mm thick coloured non skid ceramic tiles (squares / rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 sqm, in floors etc, set and joint in neat cement slurry and pointed in white or colour cement to match the tiles and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed

S&F coloured glazed ceramic tiles in vertical surfaces 350 x 250 x 7 mm / 450 x 350 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match in vertical surfaces such as skirting / dado and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L 40 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in flooring and including demolition complete all as specified and directed

M&L 75 mm thick PCC type C2 1:3:6 (40 mm garade stone aggregate) as in plinth protection / path complete all as specified and directed

Taking down cement plaster of any description on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed

M&L 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4 in two layers and including using WPC in second layer and finishing even and fair without using extra cement complete all as specified and directed. NOTE: WPC will be measured and paid separately.

M&L 10 mm thick rendering on fair faces of brick or concrete sufaces in cement mortar 1:6 and including finishing even and smooth (without using extra cement) complete all as specified and directed.

M&L 5 mm thick rendering on ceiling surfaces in CM 1:3 and including finishing even & smooth (without using extra cement) complete all as specified and directed.

M&L preparation of newly plastered surface of wall by vacum based sanding machin, applying Bison wall putty two coats (not less than 1 mm thick) (multipurpose mixture shall be used for uniform and proper mixing of putty) and applying two coats of acrylic distemper white / colour (approved shade) by auto roller and including preparation of surface as per manufacturer's instructions complete all as specified and directed.

M&L preparation of newly plastered surface of wall by vacum based sanding machine and applying one coat of Alkali Resistance Primer and including applying two coats of weather coat exterior emulsion primer (100% Acrylic weather coat anti dust ) of approved shade by auto roller including preparation of surface as per manufacturer's instructions complete all as specified and directed.

M&L preparation of newly plastered or unplastered surfaces of wall and applying three coats white wash complete all as specified and directed.

All as per Sl. Item No. 61 above but on ceiling

S&F powder coated of any colour anodized aluminum frame (minimum thickness of powder coating 50 micron) for door / windows / ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S&F anodised powder coated of any colour aluminium sliding window and ventilator shutters without sash bar (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium anodised fittings including locking arrangement and all accessories commplete all as specified and directed. Note: Glass shall be measured and paid separately

S&F anodised aluminium window and ventilator shutters (minimum thickness of powder coating 50 micron), fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed. Note: Glass shall be measured and paid separately

S&F anodised powder coated of any colour aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no.). friction hinges type B-21 100 mm long (2 no.) suitable handle (2no.) complete all as specified and directed. Note: Glass shall be measured and paid separately

S&F aluminium anodised powder coated of any colour (thickness of powder coating not less than 15 micron) with Deco grill aperature size 50 x 50 mm fixed with suitable channel for windows/ventelator fixing arrangements complete all as specified and directed.

S&F 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc. 0.5 Sqm in each pane complete all as specified and directed.

All as per Sl. Item No. 68 above but frosted on one side sheet glass, n. exc. 0.5 Sqm in each pane.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white and including white colour seat cover and connection to drain and to flush pipe & mild steel chromium plated or aluminised hinging device etc, (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 litres capacity fixed including syphonic action type, ball valve, float and handle including brackets etc, complete all as specified and directed

S&F in repairs PVC connections 15 mm size with PTMT nuts and washers for 600 mm long pipe complete all as specified and directed

S&F in repairs 15 mm dia stop valves of chromium plated fancy type screwed down high pressure screwed at the ends for iron pipe or union with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed concealed type complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose of size 125 mm size with swivel joint fixing to GI pipe of 15mm dia complete all as specified and directed.

S&F in repairs CP bib taps in 15 mm dia chromium plated cast copper alloy of fancy type screwed down for iron pipe complete all as specified and directed.

S&F in repairs 500 litres capacity, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of including provision of inlet, outlet overflow and wash out connections complete all as specified and directed.

Disconnecting existing tanks of capacity exc. 500 & n. exc. 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position (Cleaning, repairs, etc. measured seperately) complete all as specified and directed.

S&F in repairs ball valves 20 mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic bal screwed for iron pipe & fixed complete all as specified and directed. (min. weight 20mm-210 gms)

S&F in repair PVC floor trap with grating and including jointing with solvent cement to waste pipe 75 mm dia complete all as specified and directed.

S&F in repair cast iron floor trap,100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repair 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair sinks made of stainless steel 1 mm thick, kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repairs plate rack of size 24 x 30 x 10 inch complete all as specified and directed. Make: Prayag Cat No P-330 or equivalent as approved by GE

S&F in repairs wash hand basin vitreous china white flat back of size 580 X 450 mm with brackets, complete all as specified and directed.

S&F in repair 15 mm dia fancy type pillar taps, cast copper alloy, with or without lettered hot or cold with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 50 mm dia LDPE PVC pipe pressure rating 6kgf / cm2 as in waste pipe to wash hand basin / kitchen sink / urinal complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls & floors complete all as specified and directed.

All as per Sl. Item No. 89 above but 75 mm bore

S&F 110 bore PVC (SWR) bends any radius complete all as specified and directed

All as per Sl. Item No. 91 above but 75 mm bore

S&F 110 mm bore PVC (SWR) bend with access door complete all as specified and directed.

All as per Sl. Item No. 93 above but 75 mm bore

S&F in repair 110 bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed

S&F 110 bore PVC (SWR) vent cowl complete all as specified and directed

M&L 18 to 20 mm thick granite stone in steps, jambs, pillars, window cills, cooking platform, office counter set etc, in cement morter (1:4) and including pointing in white cement (1:2) using marbel dust with admixture of pigment to match with shade of granite and including demolition complete all as specified and directed.

M&L machine cut Kota stone slab 20 to 25 mm thick in flooring laid over and including 20 mm thick cement screed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as Sl item No. 98 above but in skirting with 10 mm thick rendering in CM 1:6.

M&L rounding for edges of stone slab one edge, such as in steps cooking platform and other similar work complete all as specified and directed.

S&F in repairs 25 mm stainless steel curtain rod complete all as specified and directed.

S&F stainless steel decorative brackets for curtain rails complete all as specified and directed.

M&L preparing old decorated plastered wall surfaces and including brooming down or steel wire brushing, scraping down moulds, mass and efflorescent salts and greasy spots and applying two coats of white wash complete all as specified and directed.

All as per Sl. Item No. 103 above but on ceilings

M&L complete removal of existing tretement foom old decorated plastered surface of wall by vacume based sanding machin, removal of nails etc & filling cracks / hole by putty, applying one coat of putty not less than 1 mm thick as required (Multipurpose mixture shall be used for uniform and proper mixing of putty) and including applying one coat of BP white interior primer on putty surface and applying two coats of acrylic distemper of approved colour by auto roller and including preparation of surface as per manufacturer's instructions complete all as specified and directed.

M&L complete removal of existing tretement from old decorated plastered surface fo wall by vacume based sanding machin, removal of nails etc, & filling cracks / hole by appllng putty and including applying one coat of alkali resistance primer and applying two coats of weather coat exterior emulsion paint (100% Acrylic) of approved shade by auto roller and including preparation of surface as per manufacturer's instructions complete all as specified and directed.

M&L pre-cast RCC 1: 2:4, type B-1 using 20 mm graded stone aggregate as in cover slabs for man holes etc, set in cement mortar I : 6 and including demolition complete all as specified and directed.

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F in repairs CP tubular rail, 20 mm dia 600 mm long, brass chromium plated complete all as specified and directed.

M&L 18 to 20 mm thick Makrana white marble work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

M&L 100 mm thick PCC type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base / hard standing and including demolition complete all as specified and directed.

M&L 100 mm thick PCC, type C2, 1:3:6 (using 40 mm graded stone aggregate) as in path finished surfaces even and rough without using extra cement and including demolition complete all as specified and directed.

S&F in repairs 4 mm thick PVC coated GI wire rope for hanging cloths including fixing arrangement with steel member (as per sample) complete all as specified and directed

M&L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and pigment, jointed and pointed in neat cement slurry laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F steel work in tubular trusses (framed), including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161/1979 grade St.-240 and including dismantling complete all as specified and directed

M&L point wiring with 1.5 sqmm PVC insulated unsheathed multistranded copper cable of FRLSH grade with one run of 1.5 sqmm PVC insulated copper cable as earth continuity drawn in concealed PVC Conduit not less than 20 mm with pressed steel in concealed modular MS box duly and including covered with modular sheets for mounting modular switches / sockets, accessories such as spacers, saddles, junction boxes for one light / fan point / bell point 5 amp socket on independent board controlled by one switch and including taking down complete all as specified and directed. Note- The quoted rate is deemed to be include cutting, chasing, pinning and making good the disturbed surface.

All as per Sl. item No 116 above but one 3 pin socket outlet 5 amps on the same board with other switches

All as per Sl. Item No.116 above but one light point controlled by two 2-way switches

All as per Sl.item No. 116 above but with 2.5 sqmm cable with one run of 2.5 sqmm cable as earth continuity on independent board.

M&L concealed sub main wiring with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same & taking down complete all as specified and directed. NOTE:- (i) Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. (ii) The quoted rate is deemed to be include cutting, chasing, pinning and making good the disturbed surface.

All as per item No. 120 above but with 2 runs of 6 sqmm main wire along with 1 run of 6 sqmm earth wire.

S&F ceiling rose surface backlite 3 terminals 65 x 50 mm 230V including PVC Box of size 3"X3" round type complete all as specified and directed.

S&F modular Bell Push 6 Amps, 1 module

S&F bell electric ding dong type, Ac 230 volts

S&F modular switch 1 Way 6A, 1 module.

S&F modular switch 2 Way 6A, 1 module

S&F modular socket out let 3 pin 5 Amps flush type, 230 V

S&F modular switch sockets combination 5 A, 3/5 Pin, 3 module

S&F modular switch sockets combination 16 A, 6 Pin, 3 module

S&F modular fan step regulator, 120 W - 2 module

Supply and replacement of 10 watt LED bulk head fitting, IP 66, IK 09, surge protection level until 2.5 KV, beam angle of light source 120 degree, light source colour cool day light, 6500 K, 120 degree, polycarbonate lense cover, burning hour 50000 hr, aluminium dia-Cast housing material complete all as specified and directed. Make: Philips Cat No.WT202WLED6SCWPSUS2PC or equivalent as approved by GE

Supply and replacement of LED retrofit lamp 9/10 Watt having B22 holder base with polycarbonate body and aluminium heat sink complete all as specified and directed.

Supply and replacement of lamp holder PVC / poly carbonate type with back plate for LED bulb of any type complete all as specified and directed.

S&F LED light fitting 1 x 20 Watt, 220 V, AC decorative box type with driver, holder and including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and direected.

S&F LED light fitting 1 x 09 Watt, 220 V, AC decorative box type with driver, holder and including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and direected.

Supply and replacement of LED street light 35 W, 230 V, AC outdoor type with high pressure die aluminium housing and heat resistance with driver, lamp bracket impact resistance IK08 and corrosion resistance and including thermal management in multiple optics with IP 66 protection, lumen output 4200 and including 40 mm dia GI pipe of 1.5 m length with necessary bolts and nuts to fix complete all as specified and direected.

Taking down defective ceiling fan from its position and refixing the same after repairs complete all as specified and direected.

Taking down defective exhaust fan 300 mm sweep from its position and refixing with louvers the same after repairs and including 3 core flexible copper wire from ceiling rose to fan complete all as specified and direected.

S&F exhaust fan made of sturdy Engineering Plastic complete with louvers shutter, voltage 230 V, 50 HZ, RPM 1200 copper winding of sweep 250 mm and including connection with multistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and directed.

S&F ceiling fan 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE five star rated with BLDC motor with all fittings white / Ivory colour complete all as specified and directed.

M&L painting of ceiling fans and blade with spray paint using synthetic enamel paint after cleaning all dust etc, complete all as specified and directed.

All as per Sl. Item No. 141 above but exhaust fans of any sweep.

M&L rewinding of ceiling fan motor of type 1200 mm sweep, with super enameled copper wire of appropriate gauge and including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc. complete all as specified and directed.

All as per Sl. Item No. 143 above but exhaust fans of 300 mm sweep

Supply and replacement of ceiling fan capacitor / condensers 2.5 mfd complete all as specified and directed.

All as per Sl. Item No. 145 above but 4.0 mfd

Supply and replacement of ball bearing 6201 / 6202 / 6203 as required complete all as specified and directed.

Supply and replacement of fan clamp with nut & bolt and rubber bush suitable for ceiling fan of any sweep complete all as specified and directed.

S&F electric water heater 25 Ltrs capacity, storage type steel body with copper inner tank and heating element upto 2 KW capacity BEE 5 star, AC single phase, 230 volts including connection with multistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, safety valve, thermostate, NRV, connection piece etc, and grouting and making good to disturbed surface complete all as specified and as directed.

Taking down carefully old unserviceable MCB DBs with MCBs of any type by unscrewing from wall, ceiling and making good surfaces to match with existing surface complete all as specified and directed.

S&F MCB DB 12 way SPN with 200 A rated bus bar, 240 Volts, double door complete all as specified and directed.

S&F MCB DB 04 way TPN with 200 A rated bus bar, 240 Volts, double door complete all as specified and directed.

Supply and replacement sheet metal enclosure single pole and neutral enclosure with two pin and earth plug and socket and including one single pole MCB 20 Amps capacity complete all as specified and directed.

S&F MCB SP 6 to 32 Amps 240 Volts,10 KA, C curve complete all as specified and directed.

All as per Sl. Item No. 154 above but SPN 40 Amps

Supply and fixing TPN 40 To 100 AMP, 415 V 10 KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed

M&L cutting openings, through brick / stone walls built in cement mortar for fixing exhaust fans of 300 mm sweep and including making good in cement mortar 1:4 to match with existing surface complete all as specified and directed.

M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and including dismantling complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.

ANIL KUMAR BISWAL

RANA ENTERPRISES

HARI PALAI

ANTARYAMI PANDA AND COMPANY

KR Enterprises

PABITRA MOHAN PARIDA

M/S SANTOSH SATAPATHY