DAY TO DAY COMPREHENSIVE B R MAINTANCE CAMOUFLAGE PAINTING TO TECHNICAL AREA AT AF STN OJHAR

Amount

Labour only for opening of air locks in toilets /baths and kitchen water pipe line but excluding fittings complete all as specified.complete all as specified and as directed by Engineer-In-Charge

Taking up or down GI tubing and connections of 15mm bore including cleaning for refixing Complete all as specified and directed by Engineer-in-charge.

All as per item No.2 above but 20 mm bore.

All as per item No.2 above but 25 mm bore .

Supply and fixing tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 15mm) complete all as specified complete all as specified and as directed by Engineer-In-Charge

All as per item No.5 above but refixing old servicable pipe .

Supply and fixing tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 20 mm) complete all as specified complete all as specified and as directed by Engineer-In-Charge

All as per item No 7 above but refixing old servicable pipe complete all as specified .

Supply and fixing tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 25 mm) complete all as specified Make: JINDAL, TATA,. complete all as specified and as directed by Engineer-In-Charge

All as per item No 9 above but refixing old servicable pipe complete all as specified .

S& F for 20 mm dia CPVC pipe as on wall , floor , ceiling , concealed etc complete and as directed by Engr in charge with all fittings and fixtured , jonting solution of ISI mark including making grove in wall/ceiling and finished with cement mortor 1:4 with plumbing nails for securing pipes etc directed

S& F for 25 mm dia CPVC pipe as on wall , floor , ceiling , concealed etc complete and as directed by Engr in charge with all fittings and fixtured , jonting solution of ISI mark including making grove in wall/ceiling and finished with cement mortor 1:4 with plumbing nails for securing pipes etc directed

Supply and fixing in repairs 15 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed in tank which situated up to 16m height buildingincluding necessary ladder for climbing if required .complete all as specified and as directed by Engineer-in-Charge.

All as per item No.13 above but 20 mm bore complete all as specified.

All as per item No.13 above but 25 mm bore complete all as specified.

Labour only to adjust the float valves of tanks of 500 ltr and 1000 ltr tanks up to 4 story bldg

Supply and fix non return valves of 20 mm dia of ISI mark pipe to existing /new GI pipes including removing and refixing the same pipe for required fitting to fix the valve etc complete and as directed by Engr in charge

S&F in repairs 10 litres capacity PVC Valveless symphonic action type flushing cistern high / low level white complete with inlet , ball valve float and handle including brackets and telescopic down pipes and jointing with WC complete complete all as specified and as directed by Engineer-In-Charge

Servicing of Flushing system 10 litres capacity PVC Valveless symphonic action type flushing cistern high / low level . Taking down the all materials from existing cistern, Cleaned all dirt and refixing the same with making good and leakage free condition.

S&F in Repair of PVC Syphonic system for 10 ltr capacity flushing cistern

S&F in Repair PVC Flush handle for 10 ltr capacity flushing cistern

S&F in Repair of Rubber Flush washer for 10 ltr capacity flushing cistern

S&F in Repair of PVC Float valve for 10 ltr capacity flushing cistern

S&F in Repair of PVC Flush band for low and high level for 10 ltr capacity flushing cistern

S&F in Repair of PVC clamps with screws for hanging of low and high level 10 ltr capacity flushing cistern

Taking down and refixing the 15mm dia CP Bib Cock/ Piller cock/ Angle cock of any make with replacement of washer/ Sprindle/Head which are paid separately complete. The Bib cock/ Piller Cock/ Angle cock shall be fixed with Taplane tape without damageing the exising pipe lines complete. 02 Nos of Bib cock/ Piller Cock/ Angle cock repair shall be consider as 01 unit.

Supply only India rubber washers for items catered as in 26 Above.

Supply only brass sprindle for CP water taps of various make 15mm dia.

Supply only brass sprindle for CP Piller cock of various make under 15mm dia.

Supply only brass sprindle for CP angle cock of various make 15mm dia.

Supply only CP Head for CP water taps of various make under 15mm dia.

Supply only CP Head for CP Piller cock taps of various make 15mm dia.

Supply only CP Head for CP angle cock taps of various make 15mm dia.

S&F in repair Bib tap PVC any colour/high pressure, screwed down high pressure as specified for 15mm bore .Complete all as specified and directed by Engineer-in-charge.

S&F in repair Pillar tap PVC any colour/high pressure, screwed down high pressure as specified for 15mm bore.Complete all as specified and directed by Engineer-in-charge.

S & F in Repair Pillar taps , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure fancy type of 15 mm bore size with or without lettered Hot or Cold with long screwed shanks and flynuts , screwed for iron pipe and fixed Complete all as specified and as directed by Engineer-In-Charge.

S&F in Repair Cast copper alloy CP angle valve type stop cock suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head of make Prayag/Marc/Seiko,Complete all as specified and as directed by Engineer-In-Charge.

S&F in Repair bib taps of bore size 15mm, cast copper alloy, , chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule Complete all as specified and as directed by Engineer-In-Charge.

S & F in Repair brass cromium plated conceled stop cock of bore size 15 mm, in position conceled in walls/ceilings or floors complete duly making grooves filled with cement mortar in 1:4 finished to match with adjacent surfaces complete all as specified and as directed by Engineer-In-Charge

Supply and fixing in repairs 100 mm dia CP brass shower rose swivel type with extension CP rod 15mm dia and 300mm long with connecting rod suitable for 15mm bore pipe .Complete all as specified and directed by Engineer-in-charge.

S&F in Repair PVC connection 15mm size with PTMT nuts, of length 600mm Complete all as specified and as directed by Engineer-In-Charge.

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including fixing plugs , bedding urinal against wall in cement mortar (1:2) etc. including CP Waste fitting and PVC waste pipe.Completed all as specified and directed by Engineer-in-charge.

S & F in Repair viterous china wash hand basin of size 550 x 400 mm, white colour flat back excluding taps, chain and plug and porcelean stopper but including brackets and CP waste fitting . complete all as specified and as directed by Engineer-In-Charge

S & F in repairs vitreous china wash down water closet pedestal pattern (EWC) white excluding flushing cistern & Incl white seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe.Complete all as specified and directed by Engineer-in-charge.

S&F in repairs vitreous china squatting pan Orissa pattern size 580x440mm white with P or S trap front or back inlet and integral foot rests including connection to trap to flush pipe etc complete including for making good to floor etc Complete all as specified and as directed by Engineer-In-Charge.

S&F in repairs Plastic seat cover white closed pattern with flat bottom and cover with CP hinges for EWC.

S&F in repairs Plastic seat cover white Anglo Indian pattern with flat bottom and cover with CP hinges for EWC.

S&F in repair PVC hinges for EWC seat cover complete.

S&F in Repair CP waste coupling 32 mm dia for wash basin/ Sink/urinal ISI Marked

All as per item No 49 above but 40 mm dia for ISI Marked

S & F in Repair 32 mm PVC flexible pipe for waste outlet with threaded socket at one end.complete all as specified and as directed by Engineer-In-Charge

S & F in Repairs 40 mm PVC flexible pipe for waste outlet with threaded socket at one end.complete all as specified and as directed by Engineer-In-Charge

S & F in repairs CP health faucet special (1.5 mtr tube) with hook for EWC complete all as specified and directed by Engineer in charge

All as per item No 53 above but of PVC.

S & F in Repair CP Holders for health faucet with SS Screws equivelent complete all as specified and directed by Engineer in charge

S & F in repairs PVC Health faucet flexiable tube 1.5 mtr with hook for EWC complete all as specified and directed by Engineer in charge

S & F in repairs CP Health faucet Head for EWC complete all as specified and directed by Engineer in charge

S&F in Repair Brass chromium plated tubular towel rail 20mm dia 60cm long with and including flanges complete all as specified and as directed by Engineer-In-Charge

S & F in repairs soap dish stainless steel as approved by GE complete all as specified and as directed by Engineer-In-Charge.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. Complete all as specified and as directed by Engineer-In-Charge..

S & F in repairs Grating of 125 mm dia of stainless steel with or without waste hole Complete all as specified and as directed by Engineer-In-Charge.

S/F Iin repairs ss square grating with minimum size 100 mm x 100 mm with frame icluding fixed in white cement and mseal to traps and making good as directed by Engr in charge

Dismantling of PVC Pipes of any dia

S & F for PVC (SWR) pipes, bore of pipe in 110mm, single socketed, in any length, with rubber ring joints, laid in floors or fixed to walls Complete all as specified and as directed by Engineer-In-Charge.

S&F PVC (SWR)pipe single socketed in any length with rubber ring joints,laid in floors 75mm dia Complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing in repairs Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of 40 mm dia bore for wash hand basin Complete all as specified and directed by Engineer-in-charge.Make:Prayag

S&F in repairs PVC(SWR) branch pieces, single (Single Y) equal or unequal or with parallel branches 75mm dia Complete all as specified and as directed by Engineer-In-Charge.

S & F in Repair for PVC (SWR) bends, any radius, bore of pipe in 75mm with cement solvent in position .Complete all as specified and as directed by Engineer-In-Charge.

S & F in Repair for PVC (SWR) bends, any radius, bore of pipe in 110mm with cement solvent in position Complete all as specified and as directed by Engineer-In-Charge.

S&F in repairs centrifugal spun pipe red in colour 75mm bore of pipe, single socket in any length with rubber ring joint, fixed to walls /Floor. all as specified and directed by Engr-in-Charge.

All as per item No.70 above but 100 mm dia of pipe all as specified & as directed by Engr-in-Charge.

S & F in repairs CI bends 75 mm dia with access door all as specified and directed by Engr-in-Charge.

All as per item No.72 above but 100 mm dia of pipe all as specified & as directed by Engr-in-Charge.

S&F CI branch pieces, single(equal or unequal) or with parallel branches 75 mm dia.

All as per item No 74 above but 100 mm dia pipe

Cleaning of water tank of capacity upto 1000 Ltr. removing all scale and dirt using detergent powder and bleaching powder etc from tanks and from mouth of pipe etc, and hoisting if required and reconnecting to the pipe and writing of cleaning date on tank with paint complete all as specified & as directed by Engineer in charge’

Supply and fixing PVC Cover lid for PVC water storage tank of capacity 500 litres including PVC hinges and PVC .Complete all as specified and directed by Engineer-in-charge.

Dismantling water tanks of exc250 ltr but n exc 500 ltr. of any description from roof slab of building up to four storey and removing to store.complete all as specified and as directed by Engineer-In-Charge

Dismantling water tanks of exc 500 ltr but n exc 1000 ltr. of any description from roof slab of building up to four story and removing to store. complete all as specified and as directed by Engineer-In-Charge

Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete and all as specified and as directed by Engineer-in-Charge

Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete and all as specified and as directed by Engineer-in-Charge.

S&F in Repair Stainless Steel Plate Rack of size 31'' x 30'' x 10'' with using stainless steel sheet of 0.63mm thickness Fixed with Rawl plug and screw. complete all as specified and as directed by Engineer-In-Charge.

S&F in Repair Stainless Steel Plate Rack of size 24'' x 24'' x 10'' with using stainless steel sheet of 0.63mm thickness Fixed with Rawl plug and screw. complete all as specified and as directed by Engineer-In-Charge.

S&F in Repair stainless steel sinks with drainage board made of 1mm thick stainless steel sheet for kitchen or laboratory with plugs washers and waste pipe including fixing cantilever brackets and connecting union to pipe overall size not less than 915mm x 460mm and bowl size 410mm x 330mm x160mm.complete all as specified and as directed by Engineer-In-Charge.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete.

S & F in repair Cast iron floor trap with CP grating weight of grating not less than 35 grams joints to waste pipe in run lead joint dia of outlet 75 mm of floor, trap with deep water seal and of heavy weight coated with tar/black bitumen paint including making good with existing surface complete all as specified and directed by Engineer-in-charge.

M&L to prevent leakage/seepage from Nahani trap/ floor trap . Including existing trap shall be cleaned by removing dirt dust etc, all cracks to be treated with suitable crack filling compound and applying two coats of flexiable acrylic modified cementous water proofing syatem @ 2kg/Sqm at 1mm thickness Make : Tech force 2K strong of M/s Choksey or URP admixed with cement in 1:1 propotion without waterin 1 coats of make Dr Fixit or equivelant. The Shall be tested with ponding test by Engr-in-Charge. If any failure occoured that shall be redone without any extra cost with in 24 Hrs.

M/L for easing of door shutters for easy closing /opening tightning of hinges or changing the position of hinges adjustment of tower bolts , sliding door bolts with new screw etc complete all as specified and directed by Engr In charge

M/L for easing of window shutters of any type , kitchen cupboards shutters , show case shutter , drawers including fixing of screws for easy closing /opening tightning of piano hinges or changing the position of hinges adjustment of adjusting of handles, knobs with new screw etc including other small adjustments complete all as specified and directed by Engr In charge

Fixing only in repairs the existing butt hinges with new screws of any size & any locations complete all as spcified and directed by Engr In charge

Fixing only in repairs the existing wooden pelmets boxes in position by using plug/wooden gutties embeded in walls & making good in CM 1:3 fixed with MS holder clips complete including tightning of screws etc in all respect length of each pelmet not exceeding 2.5 m complete all as specified and directed by Engr In charge

S & F in repairs floor door stoppers double legged of aluminium alloy body & tounge aluminium anodised alloy with rubber fixed with steel screws on the door frame of size 150 mm long compete all as specified as directed by Engineer -in -charge

S/F in repairs aluminium anodized hasp & staple saftey type with mild steel pin hinge including bolt to hinge plate fixed with screws of 100 mm size compete all as specified as directed by Engineer -in -charge

S & F in repairs 300 mm long and 16 mm dia aluminium alloy anodized sliding door bolt with hasp and staple (Bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminimum alloy.compete all as specified as directed by Engineer -in -charge

S & F in repairs 300 mm long and 16 mm dia Mild steel sliding door bolt with hasp and staple (Bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminimum alloy.compete all as specified as directed by Engineer -in -charge

S/F in repairs door closer hydraulically regulated designation No.2 universal type of aluminium extruded section body fixed to doors frameswt 60 to 80 Kg with screws or by welding on steel door frame complete all as specified and directed by Engr -in charge

Supply and fixing in repairs helical door spring 150mm size with roller and roller plates of mild steel incl welding to angle iron plate or fixing with wooden/steel chowkhats as required and as specified including necessary welding where ever required. Make: Heera, Universal.Complete all as specified and directed by Engineer-in-charge.

S/F in repair cast iron stove enamalled window handles(left/right) of size 150 mm with nuts & bolts or with screws complete all as specified and directed by Engr in charge.

S/F in repair cast iron window peg stay 250 mm long fixed with nuts & bolts or with screws complete all as specified and directed by Engr in charge.

Fixing only in repairs existing barrel bolt/tower bolt /ms handled/aluminium handles of any size at any location with new screws Complete all as specified and directed by Engineer-in-charge.

labour only for repairing of steel window /ventilator , making good to jamb/corroded portions and hinges , oiling to hinges , any fabricator work , bending etc and make functionable including any small fittings required etc complete all as specified.complete all as specified and as directed by Engineer-In-Charge

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

Supply and fixing 4 mm thick sheet glass ordinary quality and size in any type of frames and glazing with oil putty (or beading) in square exc. 0.5 Sqm each incl hacking out old broken glass from wooden/steel frames .Complete all as specified and directed by Engineer-in-charge.

S&F of loosed window glasses with oil putty complete with making good complete, window not exceeding 1.50 Sqm

Supply and fixing 3 mm thick figured glass ordinary quality and size in any type of frames and glazing with oil putt (or beading) in square exc. 0.5 Sqm each incl hacking out old broken glass from wooden/steel frames .Complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs stainless steel wire cloth power woven .36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples for steel window and ventilator or aluminium window . Complete all as specified and directed by Engineer-in-charge.

S & F in repairs stainless steel wire cloth .36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tracks or wooden beeding patti.to gauge door shutters and wooden windows compete all as specified as directed by Engineer -in -charge

M&L for welding in repairs exc. 2.5cm but n exc. 5cm in length, thickness of metal to welded exc 6mm but n exc 9mm for steel windows , ventilators door frames , door hinges , door springs etc compete all as specified as directed by Engineer -in -charge

S & F in repairs curtain rod of metalic 25 mm dia with chromium plated including bracket both side fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified as directed by Engineer -in -charge

S&F in repairs for fancy type drapery rod bracket of MS powdercoated fixed to existing drapory/curtain rod colour shape and pattern as approved by Engr in charge

Taking down shutters of any description exc. 1.0 SqM but n exc 2.0sqm eacheach compete all as specified as directed by Engineer -in -charge

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) n.exc. 1.5sqm each Complete all as specified and as directed by Engineer-In-Charge..

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5sqm but n exc4sqm each Complete all as specified and as directed by Engineer-In-Charge..

S & F second class hard wood (Haldu / Hallock) plain, solid, straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at jointscompete all as specified as directed by Engineer -in -charge

S&F Pressed steel frame of 165 x 60 mm of thickness 1.25 mm for doors with one or more 30mm rebates including necessary supply and fixing lugs,locks, strike plate including fixing of hinges etc also including flat iron hold fast, threshold plate and filled with PCC 1:3:6 inside MS frame all as specified and directed . ( hinges shall be paid as supply only)”

S & F for factory made 35 mm thick 2 nd class hard wood rails/style plain, framed panelled shutters (two panels) with panels of timber flat on both sides (feather edge) or veneered particle board with commercial veneering on both faces . The size of rail and stile as per IS 1003 (Part 1) kiln seasoned and chemically pressure treated.compete all as specified as directed by Engineer -in -charge

S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive gauze, glass etc., (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizess of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a)compete all as specified as directed by Engineer -in -charge

M & L for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified

S & F steel ventilators with top hung shutter including hinges, steel peg stay, e compete all as specified as directed by Engineer -in -charge

S/F aluminium powder coated ventilator with frame and beading with figured glass louvers and aluminium knobs and fixed SS wire mesh outer side with aluminium beading etc completed of size 600x 900, 450x 600 or as directed etc completed

S & F Solid PVC door frame of size 50 mm x 47 mm made out of 10 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing compete all as specified as directed by Engineer -in -charge

S & F Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail: paneling of plain colour PVC sheet t be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading , and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing compete all as specified as directed by Engineer -in -charge (Make-Rajshri/ Sintex or equivilants)

S & F 100 mm MS butt hinges medium weight cold rolled mild steel

S & F 150 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed by Engineer-In-Charge.

S & F 150 mm extruded aluminium alloy handles , fabricated type, anodised complete all as specified and as directed by Engineer-In-Charge.

S & F 300 mm long and 16 mm dia aluminium alloy anodized sliding door bolt with hasp and staple (Bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminimum alloy.compete all as specified as directed by Engineer -in -charge

S & F 300 mm long and 16 mm dia Mild steel sliding door bolt with hasp and staple (Bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminimum alloy.compete all as specified as directed by Engineer -in -charge

M & L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces.compete all as specified as directed by Engineer -in -charge

Dismantling of existing cup Board with shutter & self n exc 3.2 sqm

S & F for 18 mm thick block board of commercial quality exterior Grade -I fixed with screws as in cup board shutters/shelves and pelmets box etc including lipping/beading all over shutter complete all specified and directed by Engr in charge

S & F 18 mm x25 mm width of flaps Continuous (piano) hinges, mild steel, bright finish or electrogalvanised

S&F Plain fillets, square, rectangular or triangular in section, clean sawn, secured with mills or brads, M & L II class soft wood exc 3 sqcm and n exc 6 sqcm

M/L for fillets , bull nosed, splayed ,chamfered or rounded on one edge or face of sec area n exc 3 sqcm of second class soft wood

M/L for fancy type CB knobs of kitchen /drawer shutter as approved by Engr in charge etc complete

M/L for magnetic door lock for door shutters of CB and kitchen shutters of SS ISI mark

S/F door magic eye piece to main door suitable for wooden door shutter of 35 mm to 40 mm thick of brass material round in shape 180 degree an 38 to 65 mm size of ISI mark, including drilling hole to door etc completed and as directed by Engr in charge Make Prince polo or equivalent as approved by Engr Incharge

S/F in repairs Stainless Steel work as Gde 304 SS in railing/swimming pool ladder/grab bar including all fitting and fixing all as specified and directed by Engr in Charge.

S&F Rubber based door bottom strip including fixing arrangement & all as per manufacturers instruction complete all as specified and directed.

S & F in repairs mortice locks 6 lever brass and pair of fancy handle of CP Brass in size 100mm for aluminum doors compete all as specified as directed by Engineer -in -charge

Repairs to aluminium door shutter of any description and size including taking down from frames for realignment and tightening including adjusting the shutter removal and refixing hydraulic or floor door spring , and hinge , refixing shutter in same opening with all necessary repairs /refixing ,including replacement of damaged jointing cleats ,glazing clips , rubber packing ,aluminium beading , screws etc also including provision of 6 mm dia through bolt with nut on both side for top and bottom rail. complete all as specified and as directed by Engineer-in-charge.

Dismentling wall and ceiling boards (fibre, pulp, insulation etc or insulation board) of any thickness including coverfillet if any complete all as specified and as directed by Engineer-In-Charge.

M&L for providing & fixing of mineral fibre accoustical ceiling system with fine fissumed tiles tegular of size 600mm x 600mm & 16mm thick on and including prelude 24XL grid suspender system of M/S Armstrong world Industries with humidity resistence (RH) of 99%,NRC 0.6 light reflectence 85% thermal conductivity 0.052-0.057 of white colour. incl 2.5mm G.I wire suspender all as per manufactures instructions ,complete all as specified and as directed by Engineer-In-Charge.

Supply and fixed in repair board of mineral fibre accoustical ceiling system with fine fissumed tiles tegular of size 600mm x 600mm & 16mm thick complete.

Dismantling CGI (corrugated ted, semi corrugated, etc.) sheets in roof coverings all as specified and directed by Engr in Charge

M & L for pre-painted galvolume aluminum zinc coating GI based corrugated steel sheet 0.50mm TCT thick of any colour approved by GE having tensile strength of 550Mpa as in roof covering / cladding to wall , fixed complete all as specified and as directed by Engineer-In-Charge.

M & L for prepainted galvolume sheeting Ridges matching with colour & profile sheeting fixed complete all as specified and as directed by Engineer-In-Charge.( Note width of ridge not less than 0.60m wide)

Demolition of stone slab and tiles of any description or thickness in floors, wall all as directed.Complete all as specified and as directed by Engineer-In-Charge

M&L for mirror polish Kota stone slab flooring 20-25mm thick over 15 mm cement screed base laid of cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing . Complete all as specified and as directed by Engineer-In-Charge.

M/L for mirror polished Kota stone slab 20-25mm thick in riser of steps, skirting, dadoand pillar including 10 mm thick rendering of cement mortar 1:4 and jointed with ditto Complete all as specified and as directed by Engineer-In-Charge.

M&L Machine cut cudappah stone slab 20mm to 25mm thick over and including cement screed bed in CM 1;6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing Complete all as specified and as directed by Engineer-In-Charge.

M&L for drilling holes for pipes etc in cadappa/granite including RCC slab nexc 25mm dia and nexc 100mm depth

S & F for mild steel works such as bands straps, support or stays for rain water, ventilating pipe, including bolts if required, hold fasts etc and similar small articles conforming to Fe 310-0 or Fe 410-0 compete all as specified as directed by Engineer -in -charge

S & F Rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M & L two coats of synthetic enamel paint over one coat of red oxide on steel based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces.compete all as specified as directed by Engineer -in -charge

Demolition of reinforced cement concrete in any position like roofs, floors other than ground floors , beam , staircases , landings , chajjas,projections, facias and similar suspended work or reinforcement cut as required to facilate demolition for portions ordered to be dismanttled up to 15 m height including forwork and necessary saftey measuresor as directed by Engr in charge

M&L for reinforced cement concrete type B1 (1;2;4) nominal mix using 20 mm graded broken stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, shelves and the like.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed by Engineer-In-Charge.

S&F mild steel TMT bar of 10 mm dia and over cut to length bent to shape required including cranking and binding with mild steel annealed wire not less than 0.9 mm dia.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar includin gall quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L Brick work with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM1 : 6 all as specified and directed by Engr-in-Charge

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick built in cement mortar 1:4 all as specified

M/L for 10 mm thick in cm1:4 plaster for repairs to distress portion of chajjas, projections ,pardi etc up to 4 story of bldg or up to 16.00 m height including necessary formwork and saftey features for working

M/L for 50 mm wide and 10 mm deep drip course to chjjas /slab porejections in cm 1:4 including necessary formwork and curing etc completed and as directed by Engr in charge

Taking down cement plaster of any thickness, raking out joints, hacking for key scrubbing down with water including terrazzo dado or wall finish such as tiles of any description and of any thickness, including for all necessary lowing etc, removal of rubbish of the premises; removal and depositing serviceable materials where directed and leaving the work clear for any type of plastering;Complete all as specified and directed by Engineer-in-charge..

M&L for 15 mm thick cement plaster in CM 1:6 on brick surface finished even and smooth without using extra cement Complete all as specified and directed by Engineer-in-charge.

All as per item No. 166 but 5 mm thick rendering in cement plaster 1:4 on ceiling

M & L for preparing plastered surfaces of walls and applying three coats of white wash compete all as specified as directed by Engineer -in -charge

M&L preparation of new plastered surface and applying 3 coats of white wash on ceiling complete.

M/L for filling floor /glazed tile joint with white cement tile grout with pigments matching with tiles including cleaning the tile surface properly

M/L for removing of tree routs, shrubs and bushes from wall surface/roof top/chajjas up to 15 M height including repairing of cracks in cement mortor 1:3 in crarcked surface and making good the surface matching with existing surface including all required ladder and cosider all saftey measures upto ht 15 mts of bldg etc completed and removal of shrubs up to 50 m distance.

M/L for repairing of existing modular kitchen including taking down & refixing at the same location cabinet, shutters & SS Rack and repairing with required material etc.complete.(i.e. ss lock,hinge, knobs,screw,washers, channels, bearings etc.)

Removing of building materials & dabries of any types the rate included in the lead i.e loading ,unloading and stacking/sprading etc outside of MD land with own arrangement by Contractor.

M&L to prevent leakage/seepage from roof shall be cleaned by removing dirt dust etc, all cracks to be treated with suitable crack filling compound and applying two coats of flexiable acrylic modified cementous water proofing syatem @ 2kg/Sqm at 1mm thickness Make : Tech force 2K strong of M/s Choksey or URP admixed with cement in 1:1 propotion without waterin 1 coats of make Dr Fixit or equivelant. The Shall be tested with ponding test by Engr-in-Charge. If any failure occoured that shall be redone without any extra cost with in 24 Hrs.

Preparation of old surfaces with complete removal of existing treatment by scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots , removing nails etc, and applying Two coats of exterior Acrylic emulsion (Apex)/Equivalent of Camouflage pattern or pattern approved by Engr-in-Charge over one coat of exterior water based wall priming on walls including provision of scaffolding required for the treatment to external surfaces of building with required safety measures etc complete all as specified and as directed by Engineer in charge. Note : The work shall be executed stage wise and each stage approved by Engr-in-Charge. Stage 1 : Complete removal of existing treatment. Stage 2 : Priming with exterior water based wall priming Stage 3 : 1st coat of exterior Acrylic emulsion (Apex)/Equivalent of Camouflage pattern or pattern approved by Engr-in-Charge Stage 4 : 2nd coat of exterior Acrylic emulsion (Apex)/Equivalent of Camouflage pattern or pattern approved by Engr-in-Charge. Note: 1.The contractor shall deploy skilled tradesman i.e. 01x carpenter, 01 x plumber with his helper and required T&P , collect the complaints slips daily morning from AGE B/R office by the contractor/supervisor and same shall be resubmitted at evening within completion of alloted job. No extra shall be paid on this account & rates are deemed to be included . 2. As per complaints , The mason and welder with his helper and required T&P , collect the complaints slips from AGE B/R office by the contractor/supervisor and same shall be resubmitted at evening within completion of alloted job. No extra shall be paid on this account & rates are deemed to be included . 3.In case of failure to attend the complaint within 48 hrs the contractor shall be recovery charged @100 Rs per outstanding complaint. 4. Due to comprehensive maintance work, The work shall be executed in various bldgs of Domestice area with small patch work/Small number complaints upto completion of Contract. This is applied to all items mentioned above. No extra shall be paid on this account & rates are deemed to be included .

M/s M R MAHANA

Chandan Constructions

SHREE SAMARTH SERVICES