CA No GE (P) KNS-10/2020-21

Amount

Note For Item No. 2.00, 3.00 here-in-after:- After opening of Financial Bid, if it is found out that quoted rates are below the existing minimum labour wages rates of semi-skilled labour as prescribed by the Government of India/State Government/Local body whichever is higher including all statutory provisions such as GST @ 18 %, ESI @3.25 %, Labour welfare cess @ 1 %, EPF @ 13 % and Bonus,( as applicable), than Accepting officer at his sole discretion, has the rights to reject the quoted bid and the same shall be treated as “Non-Bonafide”. In such case the lowest tender shall be determined by lowest amount amongst valid bonafide bids for acceptance. Quotations with '0.00' consideration (overhead and profit) shall be considered as “Non-Bonafide”.

Outsourcing for operation of Air conditioning plants 06 Nos with one Refrigeration Mechanic in each shift total three shift for 06 Nos plant, each plant having 02x50 TR Air cooled chiller (01 Working and 01 stand by) Make : Blue Star including substation 02 x 1010 KVA DG Sets, 02 x 1500 KVA Transformer, AHU 25 TR 02 Nos, Hot water generator 02 Nos and other related equipment such as air cooled chilled water plant with compressors, Air cooled condenser coil and condenser fans with microprocessor controller ,Chilled water pumps with motors, hot water pump with motors, Variable frequency drives for pumps with total controls, chilled water piping with butter fly valves, balancing valves, check valves, NRV, ‘Y’ strainers, Air separator, pressure gauge, thermometer, water flow switch, ball valves, GI ducting with insulation & dampers, Aluminium powder coated diffusers / Grills ,Cables, Cable trays, and earthing strip, fuses etc. installed at 27 FAD Kanasar continuous operation including Sunday and Holiday during Summer/Monsoon/Winter for smooth and efficient performance of AC plant to achieve desired temperature condition at Kanasar including checking of temperture, humidity, voltage, frequency, power factor etc complete all as specified and as directed by Engineer-in-Charge.( One Operator in One shift is consider as 1 day) ( Rate is to be quoted in item 2.40, 2.50, 2.60, 2.70, 2.80 here-in-after)

Note (For Schedule 'A' Item No. 2.00) :-(a). Timing of shifts shall be as directed by Engineer-in-Charge.(b) General cleaning of AC plant bldg with cleaning of plant, machinery, LT panels, AHUs etc installed in the bldg shall be carried out by the contractor on the regular basis, as directed by the Engineer-in-Charge and cost thereof is deemed to be included in the unit rate quoted by the contractor against this item.(c) Cost of peripherals & petty items such as gland dori, oiling/greasing to moving parts of pumps and motors, Fan belt of AHU, Nuts and bolts of AHU pully, lathe machine work for pully/shaft of AHU, PVC insulation tape wherever required and cost of broom sticks, cotton waste dhoties etc for cleaning of machinery, LT panels, pumps etc for installations shall be deemed to be included in the unit rate quoted by the contractor against this item.

Note (For Schedule 'A' Item No. 2.00) :- (d) Cost of log sheets for AC Plant, etc for daily running records in booklet form for a calendar month complete all as directed by Engr-in-Charge and as per approved sample shall be deemed to be included in the unit rate quoted by the contractor against this item. (e) The representative/ Engineer of Blue star company has to visit to AC Plant once in month to ensure the smooth functioning of plants. In case of any breakdown, Blue star Company representative will attend the same on priority. The cost of required items, if any, to attend breakdown will be measured and paid separately. (g) Necessary tools and plants required for efficient maintenance of AC Plants including required minor stores shall be provided by the contractor and the rates are inclusive in the quoted rates. (h) AC operator should be ITI qualified or having minimum three years of experience. Cost of uniform (Pent and shirt) and electric shock proof shoes (two times in the year) approved by Engineer-in-Charge included in rates quoted by tenderer. (j) The contractor shall install biometric attendance machine at installation and attendance record be maintained. All the payment to be released to the contractor as per biometric record. All payments will be paid through e-payment/digital payment and the record for the same will be produced along with RAR.

Note (For Schedule 'A' Item No. 2.00) :- (k) Comprehensive maintenance of 06 Nos AC plants mentioned in item above, sensors connected to Auto / manual synchronization panel of DG sets at A Regt 27 FAD Kanasar continuously including Sunday and Holiday during Summer/Monsoon/Winter for smooth and efficient performance of all equipments at Kanasar etc all as specified and directed by Engineer-in-Charge. Notes :- (i). Contractor will also provide/arrange tools and instruments necessary for smooth operation, maintenance, functioning and fault finding of IT problems , synchronization of DG sets and other IT equipments at 'A' Regt 27 FAD Kanasar. (ii). In case of any breakdown or any communication flow error contractor have to arrange the visit of tech expert to rectify the error within 24 hrs. The cost of visit of tech expert is deemed to be included in the unit rate quoted by the contractor. (iii). If the contractor fails to rectify the error conveyed to him, within 24 hours, a penalty will be levied on him at the rate of Rs 5000.00 per hour till the fault/error is rectified. Note:- Any work or items required for smooth functioning of the total AC plant which has not been catered in this Schedule shall deemed to be included under the applicable item of this Schedule covered under comprehensive maintenance. All other costs are deemed to be included under applicable items of this Schedule. No Extra payment shall be made to the contractor for those works.

Basic Rate of semi-skilled labour for One Shift per days for Manning and Operation of AC plants as mentioned in item 2.00, 2.10, 2.20, 2.30

Employer's Contribution towards Employees Provident Fund (EPF) Liability on rate quoted item No. 2.40

Employer's Contribution towards Employees State Insurance Corporation (ESIC) Liability on rate quoted item No. 2.40

Contribution toward Labour Welfare Cess on rate quoted item No. 2.40

GST on rate quoted item No. 2.40

Overhead and Profit on rate quoted item No. 2.40

Outsourcing for operation of Air conditioning plants MPB Building with one Refrigeration Mechanic in each shift total three shift for MPB Building plant, plant having 02x50 TR Air cooled chiller (01 Working and 01 stand by), Make : Blue Star, AHU 25 TR 02 Nos, Hot water generator 02 Nos and other related equipment such as air cooled chilled water plant with compressors, Air cooled condenser coil and condenser fans with microprocessor controller ,Chilled water pumps with motors, hot water pump with motors, Variable frequency drives for pumps with total controls, chilled water piping with butter fly valves, balancing valves, check valves, NRV, ‘Y’ strainers, Air separator, pressure gauge, thermometer, water flow switch, ball valves, GI ducting with insulation & dampers, Aluminium powder coated diffusers / Grills ,Cables, Cable trays, and earthing strip, fuses etc. installed at 27 FAD Kanasar continuous operation including Sunday and Holiday during Summer/Monsoon/Winter for smooth and efficient performance of AC plant to achieve desired temperature condition at Kanasar including checking of temperture, humidity, voltage, frequency, power factor etc complete all as specified and as directed by Engineer-in-Charge. ( One Operator in One shift is consider as 1 day) ( Rate is to be quoted in item 3.30, 3.40, 3.50, 3.60, 3.70 here-in-after)

Note (For Schedule 'A' Item No. 3.00) :- (a). Timing of shifts shall be as directed by Engineer-in-Charge. (b) General cleaning of AC plant bldg with cleaning of plant, machinery, LT panels, AHUs etc installed in the bldg shall be carried out by the contractor on the regular basis, as directed by the Engineer-in-Charge and cost thereof is deemed to be included in the unit rate quoted by the contractor against this item. (c) Cost of peripherals & petty items such as gland dori, oiling/greasing to moving parts of pumps and motors, Fan belt of AHU, Nuts and bolts of AHU pully, lathe machine work for pully/shaft of AHU, PVC insulation tape wherever required and cost of broom sticks, cotton waste dhoties etc for cleaning of machinery, LT panels, pumps etc for installations shall be deemed to be included in the unit rate quoted by the contractor against this item. (d) Cost of log sheets for AC Plant, etc for daily running records in booklet form for a calender month complete all as directed by Engr-in-Charge and as per approved sample shall be deemed to be included in the unit rate quoted by the contractor against this item. (e) The representative/ Engineer of Blue star company has to visit to AC Plant once in month to ensure the smooth functioning of plants. In case of any breakdown, Blue star Company representative will attend the same on priority. The cost of required items, if any, to attend breakdown will be measured and paid separately. (g) Necessary tools and plants required for efficient maintenance of AC Plants including required minor stores shall be provided by the contractor and the rates are inclusive in the quoted rates. all be provided by the contractor and the rates are inclusive in the quoted rates.

Note (For Schedule 'A' Item No.3.00) :- (h) AC operator should be ITI qualified or having minimum three years of experience. Cost of uniform (Pent and shirt) and electric shock proof shoes (two times in the year) approved by Engineer-in-Charge included in rates quoted by tenderer. (j) The contractor shall install biometric attendance machine at installation and attendance record be maintained. All the payment to be released to the contractor as per biometric record. All payments will be paid through e-payment/digital payment.(k) Comprehensive maintenance of 01 Nos AC plants mentioned in item above, sensors connected to Auto / manual synchronization panel of DG sets at A Regt 27 FAD Kanasar continuously including Sunday and Holiday during Summer/ Monsoon /Winter for smooth and efficient performance of all equipments at Kanasar etc all as specified and directed by Engineer-in-Charge. Notes :- (i). Contractor will also provide/arrange tools and instruments necessary for smooth operation, maintenance, functioning and fault finding of IT problems , synchronization of DG sets and other IT equipments at 'A' Regt 27 FAD Kanasar.(ii). In case of any breakdown or any communication flow error contractor have to arrange the visit of tech expert to rectify the error within 24 hrs. The cost of visit of tech expert is deemed to be included in the unit rate quoted by the contractor.(iii). If the contractor fails to rectify the error conveyed to him, within 24 hours, a penalty will be levied on him at the rate of Rs 5000.00 per hour till the fault/error is rectified.Note:- Any work or items required for smooth functioning of the total AC plant which has not been catered in this Schedule shall deemed to be included under the applicable item of this Schedule covered under comprehensive maintenance. All other costs are deemed to be included under applicable items of this Schedule. No Extra payment shall be made to the contractor for those works.

Basic Rate of semi-skilled labour for One Shift per days for Manning and Operation of AC plants as mentioned in item 3.00, 3.10, 3.20,

Employer's Contribution towards Employees Provident Fund (EPF) Liability on rate quoted item No. 3.30

Employer's Contribution towards Employees State Insurance Corporation (ESIC) Liability on rate quoted item No. 3.30

Contribution toward Labour Welfare Cess on rate quoted item No. 3.30

GST on rate quoted item No. 3.30

Overhead and Profit on rate quoted item No. 3.30

M&L for maintenance, periodical inspection (Once in four months), servicing/ repair of Air conditioning plants (02x50 TR) 07 Nos water cooled chiller (01 Working and 01 stand by) installed 'A' Regt at Kanasar, by OEM services professional and calibration of all the sensor, gauges connected, for smooth and efficient functioning complete all as specified and as directed by Engineer-in-Charge. ( Note:- One maintenance, periodical inspection of all installation mentioned above will be considered One Job)

M&L for maintenance, periodical inspection, servicing/ repairs of AHU 25 TR (Make : Zeco Model ZDS 100) installed at 'A' Regt, including replacement of fresh air filters for smooth and efficient functioning complete all as specified and as directed by the Engineer-in-Charge.

SSupply and charging of refrigerant R-407 including transportation and accessories complete all as specified and directed by Engr-in-Charge.

Supply and filling of screw type compressor oil including transportation all as specified and directed by Engr-in-Charge. Make:- Powermat/ Mobil/Semco

Supply and fixing in replacement of Front Mounting add-on block MNX-A2 (Make : L&T) as per existing specification complete all as directed by Engineer-in-Charge.

Supply and fixing in replacement of power contactor 3 pole MNX-18 (Make : L&T) as per existing specification complete all as directed by Engineer-in-Charge.

Supply and fixing in replacement of Directly mounting on Relay for MNX Range 14-32 Amps (Make L & T) as per existing specification complete all as directed by Engineer-in-Charge.

Supply and fixing in replacement Differential Pressure Switch for filter as per existing make complete all as directed by Engineer-in-Charge

Supply and fixing in replacement Differential Pressure Switch for fan as per existing make complete all as directed by Engineer-in-Charge

Supply and fixing in replacement Water Differential Pressure Switch as per existing make complete all as directed by Engineer-in-Charge

Supply and fixing in replacement PVC copper cable 4 core x 1.5 Sqmm at different site complete all as directed by Engineer-in-Charge. Make:- Havells India Ltd/ Polycab/ Paragon/ Anchor/ Finolex/ L & T/ Plaza/

Supply and fixing in replacement PVC copper cable 2 core x 1.5 Sqmm at different site complete all as directed by Engineer-in-Charge. Make:- Havells India Ltd/ Polycab/ Paragon/ Anchor/ Finolex/ L & T/ Plaza/

M&L for repair/maintenance of R.O plant of capacity 2000 ltr/ hour installed at 'A' Regt and testing of all parameter for smooth functioning including replacement of control valve 02 Nos complete all as specified

M&L for maintenance and repair of Hot water generator for 'A' Regt the Hot water generator maintain Heat output 49,000 Kcals/hour maximum temperature 93 C° thermal Efficiency 97% ± 2% hydraulic test pressure 5Kgs/Sqcm and complete factory built control and electrical panel with all switchgear components, hooters, safety thermal cut outs, pressure cutouts, indication lamps, voltmeter, ammeter complete for smooth functioning as per direction of Engineer-in-Charge.

Supply and fixing in repair of control system for Heating, Ventilation and Air-Conditioning (HVAC) system to control of the Air conditioning system comprising of controllers and software items including cabling complete all as specified and as directed by Engineer-in-Charge.

Supply, installation & replacement including testing motorized actuator in AHU chilled water allied as per existing make complete all as specified and as directed by Engineer-in-Charge.

Complete servicing of three way valve including supply and replacement of all unserviceable parts for smooth functioning complete all as specified and as directed by Engineer-in-Charge.

Supply, installation & replacement including testing, commissioning motorized valve in AHU chilled water allied as per existing make complete all as specified and as directed by Engineer-in-Charge.

Supply, installation & replacement including testing, commissioning flow switching in AHU chilled water allied as per existing make complete all as specified and as directed by Engineer-in-Charge.

Supply, installation & replacement BMS system including wiring testing, programming of Automation Station Model No. 525.26-154 I/O, BAC of make:- WEB Sauter complete all as specified and as directed by Engineer-in-Charge

Supply, installation & replacement rubber below with adjusting arrangement in AHU chilled water allied complete all as specified and as directed by Engineer-in-Charge.

Supply, installation & replacement PLC power in AHU chilled water allied complete all as specified and as directed by Engineer-in-Charge.

General check up & preventive maintenance and to fill up preventive check up schedule and B check services by authorised OEM (Every 300 hours of engine operation/6 months whichever is earlier) for silent DG Set 1010 KVA (Make : Cummins model C1010 D5 P) complete all as directed by the Engr-in-charge. (Note : (i) Materials required against this items shall be measured and paid for separately under item No. 28 to 33 here-in-after as supply only, All other minor parts required during B check for smooth functioning of DG set is inclusive in unit rate quoted). (ii) Labour required for replacement of an item shall be deemed to be included in the unit rates quoted against this item only).

Fuel Filter as per existing make

Lubricating Oil Filter as per existing make

By pass filter as per existing make

Air Filters Set as per existing make

Engine Oil suitable for 1010 KVA Cummins DG Set Model C1010 D5 P. Make:- Castrol/ Gulf/ Bosch/ Servo/ elf

Coolant suitable for 1010 KVA Cummins DG Set Model C1010 D5 P. Make :- Gulf/ Castrol/ MGO/ Bosch

Supply & fix in replacement AVR base card as per existing model & make, for 1010 KVA DG Set of make:- Cummins model C1010 D5 P all as specified and directed by the Engineer-in-Charge.

Supply & fix in replacement main base card as per existing model & make, for 1010 KVA DG Set of make:- Cummins model C1010 D5 P all as specified and directed by the Engineer-in-Charge.

Supply & fix in replacement governor card as per existing model & make, for 1010 KVA DG Set of make:- Cummins model C1010 D5 P all as specified and directed by the Engineer-in-Charge.

Complete Servicing, checking, testing, all electric wiring of DG set, including checking of all function of DG set, synchronizing panel, relay etc for smooth functioning by authorised OEM for silent DG Set 1010 KVA (Make : Cummins model C1010 D5 P) complete all as directed by the Engr-in-charge. (Note: (i) Materials (Cards) required against this items shall be measured and paid for separately under item No. 32 to 34 here-in-before (ii) Filters, oil, coolant shall be measured and paid for separately as supply only under item No. 26 to 31 here-in-before (iii) All other parts/item including unserviceable injectors etc required for smooth functioning of DG set is inclusive in unit rate quoted. (iv) Labour for replacement of filters, oil, coolant is inclusive in unit rate quoted.

S & F in replacement MCB suitable for 6-32 Amps, 415 Volt AC supply , FP, with over load and short circuit protection having rupturing capacity not less than 10 KA, 'C' Curve complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 37.00 here-in-before but 40-63 Amps, 415 Volt AC supply , FP

All as per item No. 37.00 here-in-before but 6-32 Amps, 415 Volt AC supply , TP

All as per item No. 37.00 here-in-before but 40-63 Amps, 415 Volt AC supply , TP

All as per item No.37.00 here-in-before but 6-32 Amps, 240 Volt AC supply , DP

All as per item No. 37.00 here-in-before but 40-63 Amps, 240 Volt AC supply , DP

All as per item No. 37.00 here-in-before but 6-32 Amps, 240 Volt AC supply , SP

Supply and replacement of MCCB, four pole, 800 Amp, 415 volt with rupturing capacity not less than 50KA and thermal setting adjustable from 70-100 percent all as specified and as directed by Engineer-in-charge

Supplying and laying in replacement LT cable, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable with aluminium conductor 1100 Volts grade , 10 Sqmm 2 core fixed on pole/ wall/ laid in cable trey/ pipe Complete all as specified and directed by Engineer-in-Charge.

All as per item No. 45.00 here-in-before but LT cable of 16 Sqmm 4 core

All as per item No. 45.00 here-in-before but LT cable of 25 Sqmm 3.5 core

All as per item No. 45.00 here-in-before but LT cable of 35 Sqmm 3.5 core

Supply & fixing in replacement of the UPS input voltage 12 V, 7 AH capacity and output voltage 230 V SMF type complete all as specified and directed. Make : Microtex / Amron / Sukam / Okaya/Luminious

Repairs and overhauling of Air Circuit Breaker (ACB) 3 pole, 415 Volt, 400/800/1200 Amp with thermal magnetic release by replacement of worn out parts and cleaning the complete ACB and testing the same after repair for smooth functioning etc complete all as specified and directed.

Supply and fixing in replacement Power factor meter digital type etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement Power factor relay etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement power factor improvement capacitor of 3 phase of different capacity complete all as directed by Engineer-in-Charge.

Repair/ Maint of unserviceable auto tap changer for 1500 KVA Transformer 11 KV/433 volts 50 Hz, the auto tap changer capacity of 17 step for + 5% to - 17.5 %. The contractor shall be ensure to OME Engineer inspection and repair as recommended unserviceable parts all as specified ans as directed by the Engineer-in-Charge. ( Note:- The contractor shall be visit the site to consider repair work before quoting of rate)

Supply and fixing in replacement indicator lamp in different colour code LED/Neon type complete (RYB) suitable for 110 Volt complete all as specified and as directed by Engineer-in-Charge.

MAHAVIR CONSTRUCTION CO

M/s Rohit Construction Co.