REPAIR / MAINT INCLUDING REPLACEMENT OF DAMAGED SERVICE CONNECTIONS IN SMQ/OMQ AREA AND REPAIR/MAINT OF FANS AND CONNECTED ITEMS IN TECH AND OMQ/SMQ AREA AND REPAIR/MAINT OF UPHOLSTERY OF FURNITURE AT VARIOUS LOCATION AT AFS HASIMAR

Amount

Supply, laying and testing LT UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core including taking down old unserviceable UG cable, complete all as specified and directed.

All as per serial item No. 1.00 here-in-before but 35 Sqmm 3.5 core, complete all as specified and directed.

All as per serial item No. 1.00 here-in-before but 25 Sqmm 3.5 core, complete all as specified and directed.

All as per serial item No. 1.00 here-in-before but 16 Sqmm 4 core, complete all as specified and directed.

All as per serial item No. 1.00 here-in-before but 10 Sqmm 4 core, complete all as specified and directed.

All as per serial item No. 1.00 here-in-before but 10 Sqmm 2 core, complete all as specified and directed.

Lifting of existing cable PVC/XLPE insulated, armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor in trenches/fixed on wall, cross sectional area 35 sqmm to 50 Sqmm 3.5 core, including re-laying the cable at same or other location. complete all as specified and directed. Note: (i) Necessary earth work shall be measured and paid separately. (ii) Cost of lugs of suitable size and cable gland irrespective of length of cable shall deemed to be included in the unit quoted rate.

All as per item No. 7.00 here-in-before but cross sectional area 10 Sqmm to 25 sqmm 3.5/4 core, complete all as specified and directed.

All as per item No. 7.00 here-in-before but size 10 Sqmm to 16 sqmm 2 core, complete all as specified and directed.

M&L for GI tubing 40mm bore, light grade, with all fittings for protection of LT UG cables including taking down old unserviceable pipe, laid in trenches all as specified and directed (Note: Excavation and earth work shall be measured and paid separately.)

M&L for GI tubing 50mm bore, light grade, with all fittings for protection of LT UG cables including taking down old unserviceable pipe, laid in trenches all as specified and directed (Note: Excavation and earth work shall be measured and paid separately.)

Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation of pole/stay, or cable trenches and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm dia conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 50mm outer dia conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.

Horizontal boring under the road below 1m (minimum) from the road surface and dia of hole n. exc. 100mm, without damaging the existing road, getting out and disposal of soil to a distance exc 50m but n. exc. 250m from the site of work, complete all as specified and directed.

S & F in repair cable, 3 core, PVC insulated unsheathed multistranded copper conductor cable (FR) of size 2.5 Sqmm passing through PVC conduit from junction box to fitting, complete all as specified and directed. Note : PVC conduit shall be measured and paid seperately.

S&F in repair MCB Single Pole & Neutral (SPN) of capacity 16 to 32 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, as per IS/IEC 60898-1, fixed in proper position, complete all as specified and directed.

S&F in repair MCB Tripple Pole Neutral(TPN) of capacity 40 to 63 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, as per IS/IEC 60898-1, fixed in proper position, complete all as specified and directed.

M&L for earthing complete with GI earth plate electrode 60 × 60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to existing earth lead strip by means of bolts, nuts, check nuts and washers of brass or HS steel all as shown in electrical plate No. 3 connected to earthing test point and and necessary excavation and earth work PCC (1:3:6) type C-1 as earth pit with pre-cast RCC (1:2:4) type B-1 cover slab size 400 x 400 x 50mm reinforced with 8mm dia TMT bar, 100mm c/c both ways including one handle made of 12mm dia including providing charcoal or coke and common salt in alternate layer of 15cm compacted thickness all around the earth electrode with funnel and 20mm bore galvanized iron watering pipe (light grade) wire mesh, copper lugs, complete in all respect, including galvanised iron earth strip 25 x 4mm, protected by 40mm bore (medium grade) galvanized iron pipe up to earthing test point as directed, incl disposal of spoil to a distance not exc. 50 mtr and necessary testing on completion, complete all as specified and as directed. Note : Proper earthing pit should be provided with pit cover.

M&L straight through joints (epoxy) cable joint kit, heat shrinkable, including jointing materials for making joints of UG electric cable 1100 volt grade heavy duty with PVC/XLPE insulated aluminium conductor nominal cross sectional area 16 to 50 Sqmm 3.5/4.0 core and testing, complete all as specified and directed.

S&F MCB distribution board (DB), TPN with sheet metal encloser, double door, IP 43 protection & IK 09, 240 volts, 4 way, as per IEC 61439-3 with necessary lugs for incomming and outgong connections, fixed on wall (concealed), with 200 Amps rated busbar (as per OEM), neutral link for fixing MCBs/Isolators including taking down old unserviceable MCB DB of any rating, complete all as specified and directed.

S&F VTPN 4 way prewired distribution board, IP-54 protection & IK-09, MCCB 160 Amps as incomer and suitable SPN/TP MCBs as outgoing, double door type sheet metal enclosure 415V with 250 Amps rated standard copper busbar for each phase and common neutral link, complete all as specified and directed.

S & F in repair water proof junction box made from SMC/FRP sheet, ready made, of size 140 x 140 x 95mm with aluminium bus bar of 50 Amp capacity for RYB and neutral, of suitable size fixed inside the junction box with necessary supporting insulators, fixed on hylem sheet/insulating sheet, MS sheet steel fixed inside the bottom portion of box to connect the cable gland complete, entire assembly fixed to pole/wall with MS clamp 15 x 3mm, nuts & bolts and connecting cables from junction box to fittings, complete all as specified and directed.

All as per item No. 25.00 here-in-before but size 350 x 270 x 210mm with aluminium bus bar of 150 Amp, complete all as specified and directed.

All as per item No. 25.00 here-in-before but size 400 x 300 x 190mm with aluminium bus bar of 150 Amp, complete all as specified and directed.

S&F MCCB 415 V, AC, 4 pole, 63 Amps, 16 KA, breaking capacity, Ics=100%, ICU, as per IS/IEC 60947-2 with thermal magnetic protection unit, complete all as specified and as directed.

S&F MCCB 415 V, AC, 4 pole, 100 Amps, 16 KA, breaking capacity, Ics=100%, ICU, as per IS/IEC 60947-2 with thermal magnetic protection unit, complete all as specified and as directed.

S&F MCCB 415 V, AC, 4 pole, 125 Amps, 16 KA, breaking capacity, Ics=100%, ICU, as per IS/IEC 60947-2 with thermal magnetic protection unit, complete all as specified and as directed.

Taking down carefully ceiling fans/exhaust fans from any height and of any make and sweep including disconnecting the cable from ceiling rose and deposited to MES store yard for repair/replacement and refixing the same after repair, complete all as specified and directed. Note : Replacement of spare parts, rewinding, painting, cable for connection etc to be measured and paid separately under relevant items.

S&F in repair switch piano flush button 5 Amp single pole one way 230 volts white finish, complete all as specified and directed.

M & L for preparation of painted surfaces of ceiling fan of any make and size up to 1400mm sweep and applying one coat of synthetic enamel white paint (1st grade quality) by spray painting including marking of MES No on bottom of fan by applying black synthetic enamel paint, complete all as specified and directed.

M & L for preparation of painted surfaces of exhaust fan by gray paint for exhaust fans of any make and size up to 300/450mm sweep and applying one coat of synthetic enamel white paint (1st grade quality) by spray painting including marking of MES No by applying black synthetic enamel paint, complete all as specified and directed.

M & L for replacement of short circuit /over heated winding from stator of ceiling fan of any make having 1200mm sweep with matching gauge and turns of super enamelled copper winding wire complete with leathered paper, glass sleeves, varnishing, baking, heating, drying, cleaning fan bearing/bushes, greasing, oiling, complete re asssembling of ceiling fan with testing etc, complete all as specified and directed.

All as per item No 35.00 here-in before but having 1400mm sweeps, complete all as specified and as directed.

All as per item No 35.00 here-in before but exhaust fan any make having 300mm sweep, complete all as specified and as directed.

All as per item No 35.00 here-in before but exhaust fan any make having sweep more than 300mm but not more than 450mm, complete all as specified and as directed.

S & F in replacement of gun metal bush with suitable size, gun metal bush for ceiling fan any make, any size and sweep, complete all as specified and as directed.

S & F in replacement of ball bearing of ceiling fans of ball bearing No 6201, complete all as specified and as directed.

All as per item No 40.00 here-in before but ball bearing No 6202, complete all as specified and as directed.

All as per item No 40.00 here-in before but ball bearing No 6203, complete all as specified and as directed.

All as per item No 40.00 here-in before but ball bearing No 6204, complete all as specified and as directed.

All as per item No 40.00 here-in before but ball bearing No 6205, complete all as specified and as directed.

S&F in replacement of canopy (top and bottom) of ceiling fans any make / size with canopy of matching colour, complete all as specified and as directed.

S&F in replacement of down rod of ceiling fan with down rod of 15mm bore, medium grade, GI pipe 0.30 metre long with new clamps, bolts, nuts, split pins washers of suitable size of approved quality, complete all as specified and as directed.

S&F in replacement of down rod of ceiling fan with down rod of 15mm bore, medium grade, GI pipe 0.45 metre long with new clamps, bolts, nuts, split pins washers of suitable size of approved quality, complete all as specified and as directed.

S&F in replacement of capacitor of ceiling fans with capacitor having capacity 2.5 mfd, 240 Volts, complete all as specified and as directed.

S&F in replacement of capacitor of ceiling fans with capacitor having capacity 3.15 mfd, 240 Volts, complete all as specified and as directed.

S&F on replacement of capacitor of ceiling fans with capacitor having capacity 4.0 mfd, 240 Volts, complete all as specified and as directed.

S&F in repair rubber bush insulator reel type suitable for fan hook of any type, complete all as specified and as directed.

S&F in replacement of hanger clamp assembly of down rod for hanging of ceiling fan fixed with nuts, bolts, washers and split pin, complete all as specified and as directed.

S&F in replacement exhaust fan louvers/shutter suitable for sweep 300mm, complete all as specified and as directed.

S&F in replacement exhaust fan louvers/ shutter suitable for sweep 450mm, complete all as specified and as directed.

S&F in repair ceiling rose surface bakelite, 65mm x 50mm size, three phase including PVC mounted block, complete all as specified and directed.

REPAIR TO CHAIR REVOLVING (TP) M & L for Re-upholstery of seat and back with new tapestry cloth (not less than Rs. 350.00 per meter) of approved quality and colour as required including dismantling of old unserviceable one, all as per drawing, complete all as specified and directed.

M & L for 75mm thick new seat cusion and 50mm thick new back cusion of approved quality of foam 32 density duly covered with new tepestry cloth (not less than Rs. 350.00 per meter) of approved quality and colour as required including dismantling of old unserviceable, all as per drawing, complete all as specified and directed.

REPAIR TO CHAIR VISITOR CUSHION SEAT AND BACK (TP) M & L for Re-upholstery of seat and back of visitor chair with new tapestry cloth of (not less than Rs. 350.00 per meter) approved quality and colour as required including dismantling of old unserviceable, all as per drawing, complete all as specified and directed.

M & L for 75mm thick new seat cushion and 50mm thick new back cusion of approved quality of foam 32 density duly covered with new tepestry cloth (not less than Rs. 350.00 per meter) of approved quality and colour as required including dismantling of old unserviceable, all as per drawing, complete all as specified and directed.

SUPPLY OF FOAM CUSHION CHAIR EASY (FD-229) Supply of foam cushion of size 520mm x 480mm x 100mm thick (32 grade high density coal foam) and covered with tapesty cloth (not less than Rs.350/- per meter) of approved quality and colour including stitching, complete all as specified and directed.

Supply of foam cushion of size 480mm x 480mm x 100mm thick (32 grade high density coal foam) and covered with tapesty cloth (not less than Rs.350/- per meter) of approved quality and colour including stitching, complete all as specified and directed.

REPAIR TO SOFA SET 5(3+1+1) SEATER Taking out damaged upholstery from sofa (Single seater) and Supply and fixing new foam 25mm thick,40 density duly covered with Tapestry cloth/Leatherite Rexene (not less than Rs 450/- per meter) as approved by Engr-in-charge, perfectly fitting and stitching the foams with lining cloth and Tapestry Cloth/Leatherite Rexene as per existing design including restructuring internal wooden framework and replacement of damaged members with 2nd class hard wood members as per existing size, complete all as specified and directed.

Taking out damaged upholstery from sofa (Three seater) and Supply and fixing new foam 100mm thick, 40 density duly covered with Tapestry cloth/Leatherite Rexene (not less than Rs 450/- per meter) as approved by Engr-in-charge. Perfectly fitting and starching the foams with lining cloth and tapestry cloth/leatherite Rexene as per existing design including restructuring internal wooden framework and replacement of damaged members with 2nd class hard wood members as per existing size, complete all as specified and directed

Supply of foam cushion of size 560mm x 530mm x 100mm thick (40 grade high density coal foam) and covered with tapesty cloth (not less than Rs.350/- per meter) including stitching, complete all as specified and directed.

Taking out damaged upholstery from Couch examination Massage and Supply and fixing new foam 127mm thick, 32 density duly covered with Leatherite Rexene (not less than Rs 450/- per meter) as approved by Engr-in charge perfectly fitting and starching the foams with lining cloth and Leatherite Rexene as per existing design, complete all as specified and directed.

Note: An amount of Rs.63,807.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S P K AGARWALA (BID ID -3381562)

M/S ASHOK ENTERPRISE (BID ID -3381591)

M/S SANMILAN NANDI (BID ID -3381154)

M/S ANIL KUMAR BAUL (BID ID -3381584)