REPAIR TO INT WTR SUPPLY PLUMBING WK SANITARY FITTINGS CLEANING OF WTR TANKS AND OTHER B/R WORK AND COMPREHENSIVE REPAIR TO JOINERY, WALL PANELLING, CEILING, LINING, FLOORING AND CERTAIN B/R WKS AN PERIODICAL SRVS TO CRT BLDGS AT NAUGAM UNDER GE 969

Amount

Taking down chowkhat or frame without taking of shutter of any description n.exc 1.50 Sqm each complete all as specified and as directed.

All as per Above Srl item no 01 above but exc 1.50 sqm but n.exc. 4.00 sqm each complete all as specified and as directed.

Taking down shutter of any description n exc 1 Sqm each complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm but n exc 2.00 Sqm each complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 and finished smooth and even without using extra cement including taking down old plaster complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:4 on stone masonary surfaces or surfaces other than fair faces of brickwork and finishing fair & smooth without using extra cement including taking down old plaster complete all as specified and as directed.

M&L PCC (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in coping incl necessary formwork, weathering, slightly rounded or chamfered angles including demoltion complete all as specified and as directed.

Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangle) area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified including 15mm thick screed bed in CM 1:6 and dismantling old floor hearth or wall tile complete all as specified and as directed.

M&L Coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15mm thick mortar bed in CM 1:4 and dismantling old floor hearth or wall tile complete all as specified and as directed.

M&L for vetrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles nexc 0.36 sqm in floors set and joined in neat cement slurry and pointed in white or .coloured cement to match and incl 15mm thick CM 1:6 screed bed or bedding layer of mortar for laying floor finishes incl dismantling of floor tiles complete all as specified and as directed.

S&F in repair pre-painted galvalume aluminium zinc coataing GI based profile steel sheet 0.50 mm thick of any colour having tnsile strength of 550 MPA as in roof covering/cladding to wall,fixed with self tappping screw as specified incl including dismantling old sheet complete all as specified and as directed.

S&F in repair 0.80 mm thick plain galvanised, mild steel sheeting , in ridges, hips valley gutters drip and straight flashing etc with grade of zinc coating 275 including dismantling old sheet complete all as specified and as directed.

S&F in repair PVC hollow interlocking wall/ceiling paneling of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement. Note: Colour and shade shall be approved by GE and contractor shall not have any claim whatsoever on this account.

S&F (in repair) 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to Alumi nium framework for insulation and acoustice purpose , 605 x 605 mm in size, with anodised Aluminium frame work/snap grids as in false ceiling all as specified, Hangers 6 mm dia GI (upto 1200 mm in length) adjusting levels fixed to roof slabs by ceiling cleats made of GI flat 40 x 3 mm size 60 mm long complete all as specified and as directed.

S&F in repair Wooden wall panelling with tongued & grooved joint laminated over high quality DHF,8 mm to 10 mm thick fixed to timber frame work, complete all as specified and as directed. Note :-Timber frame work rate included in same item.

S&F 2nd class Hard wood plain soild,straight chowkats and frame wrought,framed rebated on soild,rounded or chamfered,put together with pinned at joints complete all as specified and as directed.

S&F 35 mm thick 2nd class softwood plain,framed,pannelled shutters(any number of pannel),with pannel of timber flat on both sides (feather edged),or of veneered particle board medium density, wood particle board with commercial face venner; supplied and fitted to chowkats, complete all as specified and directed.

S&F 35mm thick 2nd class soft wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted without and mitred beads for securing glass or gauge etc all as specified in SSR Pt 1sec-8.24(a) complete all as specified and as directed.

S&F 30mm thick 2nd class soft wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted without and mitred beads for securing glass or gauge etc all as specified in SSR Pt 1sec-8.24(a) complete all as specified and as directed.

S&F, butt hinges, medium weight ,cold rolled mild steel 100mm complete all as specified and as directed.

All as per above Srl item No 20 above but 75 mm long complete all as specified and as directed.

S&F, Galvanised mild steel wire cloth 0.56 nominal dia of wire and width of aperture 1.18mm complete all as specified and as directed.

S&F in repair Galvanised mild steel wire cloth 0.56 nominal dia of wire and width of aperture 1.18mm complete all as specified and as directed.

M&L sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and S&F sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and S&F sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square exc 0.50 sqm in each panes fixed to steel or wooden window frames complete all as specified and as directed.

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty. (g) Making good of wall surface to match with existing surface complete.

S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :63x35mm X 1.48 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlocking closing (vi) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

Taking down Aluminium door shutter with chowkat of any size and refixing in same opening with minor repair complete all as specified and as directed.

S&F 5.50mm thick sheet glass ordinary quality and glazing with oil putty or with wooden beads n.exc 0.5 sqm in each pane) complete all as specified and as directed.

M&L Al anodised barrel tower bolts of extruded section and fixed of 200mm length complete all as specified and as directed.

All as per Above Srl. No item 32 above but 100 mm size.

S&F Aluminium alloy,anodised, sliding door bolts plate type stove enameled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple. Plate 200mm long complete all as specified and as directed.

S&F butt hinges medium weight cold rolled Aluminium anodised 100mm complete all as specified and as directed.

S&F aluminium handle cast type adonised 150mm complete all as specified and as directed.

S&F Aluminium anodised hydraulic door closer fixed in repairs complete all as specified and as directed.

M&L Preparing newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L Applying two coat of cement base paint on plastered or unplastered surfaces incl preparation of surfaces complete all as specified and as directed.

Preparation of new wooden surface, not otherwise described over 10cm width or grith applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & tom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Aliminium anodised barrel tower bolts, 150 mm long complete all as specified and as directed.

S&F Aluminium anodised handles, cast type anodised 125 mm long complete all as specified and as directed.

S&F MS decorative curtain rod 20 mm dia covered with coloured PVC layer with decorative ends incl PVC Knobs and MS Bracket both ends complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) and boarding any thickness, including cover fillets complete all as specified and as directed.

M&L for 4 mm thick veneered decorative Ply wood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with screws to timber frame work on ceiling etc. Note: Colour and shade shall be approved by GE and contractor shall not have any claim whatsoever on this account.

M&L for 4 mm thick veneered decorative Ply wood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with screws to timber frame work in partition, wall panelling etc. Note: Colour and shade shall be approved by GE and contractor shall not have any claim whatsoever on this account.

S&F Second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 and not exceeding 13 Sq. cm complete all as specified and as directed.

S&F second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area not exceeding 3 Sq. cm complete all as specified and as directed.

M&L 2nd class soft wood (kail) Prelaminated wooden flooring as in boarding in floors incl 5mm thick foam, 15mm thick, planed one side and edges tongued and grooved or rebeated as in flooring fixed with nails in floor, complete all as specified and directed. Note: Colour and shade of tiles shall be approved by GE and contractor shall not have any claim whatsoever on this account.

S&F in repair Venetian blind coloured strip 75 mm top 5 mm thick powder coated aluminium rod ends at brackets are moulded type with all arrangements complete all as specified and as directed.

S&F (in repair) urinal waste down pipe with all arrangement complete all as specified and as directed.

S&F (in repair) WHB flexible waste down pipe with all arrangement complete all as specified and as directed.

Demolition of brick work, PCC block masonary, stone masonary or boulder masonary built in cement mortar complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks (Old size) straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6) complete all as specified and as directed.

Cleaning of Over Head water storage tanks of capacity exc 250 ltr but up to 1000 ltr, mechanised dewatering of water including sludge from the tanks, cleaning internal & external tank surfaces with high pressure water spray/gunny bags and apply anti bacterial spray/ bleaching powder including writing date of cleaning (with thick paint in capital bold letter "TANK CLEANED ON") on each tank with stencil etc complete all as specified and as directed. Note : Rates deemed to inclusive for (i) Opening & closing of tank covers properly before & after execution of cleaning work. (ii) Removal & refixing of float valves of any size & description before & after execution of work. (iii) Removal of sludge where directed by the Engineer-in-Charge. (iv) User completion certificate shall be produced by the contractor. (v) If damage the tank during the cleaning will re-fitting the new tank with contractor's own risk. (vi) If damage the float valve during the removal for re-fitting will re-fitting the same with contractor's own risk.

S&F in repairs PVC lid for 250 to 1000 Ltrs capacity PVC water storage tanks with hinging and locking arrangement etc complete all as specified and as directed.

S&F in repairs 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F in repairs 1000 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F in repairs 15 mm ball valves high pressure of Brass rod & high desity plastec ball screwed for brass pipe and fixed. (Minimum weight 280 gms) etc complete all as specified and as directed.

S&F in repairs 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high desity plastec ball screwed for brass pipe and fixed. (Minimum weight 450 gms) etc complete all as specified and as directed.

S&F in repair PVC (SWR) 75mm bore pipes single socketed in any length with rubber ring joints and fixed to wall and laid in floor trenches complete all as specified and as directed.

S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints and fixed to wall and laid in floor trenches complete all as specified and as directed.

S&F in replacement of 15mm bore gun metal gate valves, with iron wheel head, screwed both ends suitable for iron pipe complete all as specified and as directed.

S&F in replacement of 20mm bore gun metal gate valves, with iron wheel head, screwed both ends suitable for iron pipe complete all as specified and as directed.

Vitreous China wash hand basin with pedestal, white, flat back size 550x400mm excluding tap, chain, plug but including brackets and cutting for providing ends of brackets fixed in repair complete all as specified and as directed.

S&F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and as directed. Note:- Wk will be requisitioned based on wk order and paid as per site and user requirement.

S&F in repair Vitreous Ware wash down water closet (Pedestal), white including flush pipe and plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromoium plated amluminim hinging device etc complete all as specified and as directed. Note:- Wk will be requisitioned based on wk order and paid as per site and user requirement.

S&F in repair PVC low level cistern of 10 ltr capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and as directed.

S&F in repair 15 mm dia bore Chromium plated fancy type Pillar tap screwed down high pressure with or without lettred Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair 15 mm dia bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and as directed.

Corner glass shelf assembly consisting of 5.5mm thick sheet glass with chromium plated bracket guard complete all as specified and as directed.

S&F in repair CP health flucet hand held triggered nozzle and delivers a spray of water with pipe complete all as specified and as directed.

S&F in repair CP jet spray with flexible tube 1.5 mtr long complete all as specified and as directed.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard and 60 cm long complete all as specified and as directed.

S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and as directed.

S&F in repair Fancy type CP towel ring complete all as specified and as directed.

S&F in repair 15 mm dia bore chromium plated bib taps, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F 125mm dia grating doom with/without waste hole of PTMT (Minimum weight 40 gms) complete all as specified and as directed.

Taking down or up 15mm bore GI tubing including cleaning for refixing or removal to store etc complete all as specified and as directed.

Taking down or up 20mm bore GI tubing including cleaning for refixing or removal to store etc complete all as specified and as directed.

Refixing old 15mm bore GI tubing and connections in new or old position (wall, ceiling, floor etc) complete all as specified and as directed.

Refixing old 20mm bore GI tubing and connections in new or old position (wall, ceiling, floor etc) complete all as specified and as directed.

S&F in repairs steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors of 15mm bore complete all as specified and as directed.

S&F in repairs steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors of 20mm bore complete all as specified and as directed.

M&L for lagging on 15 mm internal dia pipe all round with 50 mm thick bonded mineral wool pre-formed 'SNAP ON' pipe section of density of 144 Kg/Sqcm confirm to IS 9842 including providing with chicken mesh wire netting 25 gauge 20 mm mesh and 0.01 mm aluminium foil etc complete all as specified and as directed.

M&L for lagging on 20mm internal dia pipe all round with 50 mm thick bonded mineral wool pre-formed 'SNAP ON' pipe section of density of 144 Kg/Sqcm confirm to IS 9842 including providing with chicken mesh wire netting 25 gauge 20 mm mesh and 0.01 mm aluminium foil etc complete all as specified and as directed.

M&L for preparing old decorated plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scraping down smoke root, moulds, moss and efflorescent salts and trading oil & greasy spots, wahsing doors, cleaning glasses and leaving premises in a clean and tidy etc, and applying one coat of white wash on walls complete all as specified and as directed.

All as per item No. 90 above but one coat of white wash on ceiling complete all as specified and as directed.

All as per item No. 90 above but one coat of oil bound distemper on walls complete all as specified and as directed.

M&L for complete removal of existing treatment plastered or unplaspered old decorated surfaces of walls including brooming down or steel wire brushing, rubbing using Emery paper etc, and applying two coats of white wash on walls complete all as specified and as directed.

M&L for preparing of old painted surface of brick work, concrete plastered or unplastered surface and applying one coat of cement base paint on walls complete all as specified and as directed.

M&L for complete removal of existing treatment plastered or unplaspered old decorated surfaces of walls including brooming down or steel wire brushing, rubbing using Emery paper etc, and applying two coats of cement base paint on walls complete all as specified and as directed.

M&L for preparing of old painted surface of brick work, concrete plastered or unplastered surface of any height and applying two coats of weather proof exterior emulsion paint on walls complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint white or any different tint complete all as specified and as directed.

All as per serial item No.97 above but applying one coat of Synthetic varnish complete all as specified and as directed.

Preparation of old painted surface of steel surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint all as specified. Complete all as specified station policy/as directed by engr-in-charge. (Note - Wk will be requisitioned based on wk order and paid as per site and user requirement)

M&L preparation of old painted zinc or galvanised surfaces of any description and in any position and applying one coat of synthetic enamel paint , complete all as specified and as directed. Note : (a) The surface of corrugated steel sheeting shall be measured flat (not girfted to corrugation) without any extra allwoance for lapsand the area obtained shall be increased by 14% (b) The surface of plain steel sheeting as in ridges, hips, valley, gutters, flashings etc, shall be measured separately as flat along the girth ( length and girth as fixed) and the ares obtained shall be added to the same of corrugated steel sheeting.

Note:- Schedule of credit Rs. 52,370.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S HAJI MOHD ASHRAF SUMJI

M/S IQ ENTERPRISES