REPAIR/REPLACEMENT OF INTERNAL ELECTRIFICATION IN OFFR MD ACCN AND OTM ACCN AT D-III ZONE UNDER AGE E/M-I OF GE(N) MAMUN

Amount

Taking down carefully unsv copper/aluminium point wiring (light/fan/Bell/socket or power) complete, including fixture and fittings such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sketch fitting etc removing materials to store for keeping in safe custody for taking credit and making good to disturb surface of wall/floor with cement mortar and finishes to match existing surface complete all as specified and directed.

M & L for point wiring using 3 x 1.5 Sqmm FRLS PVC insulated unsheathed /multi stranded copper conductor cable (Phase, neutral and earth wire) drawn through and incl concealed conduit medium grade of dia not less than 20mm and 1.8mm thick and connected to common earth dolly with 1.6 mm thick cadmium plated CI/GI pressed steel sunken boxes and 3 mm thick plastic laminated sheet cover fixed with brass screws or approved make sunken modular metal flush gang box (16gauge) and suitable support frame and cover plate (inner/outer) of required modules including cutting grooves for concealed wiring for light/fan/bell point controlled by one 1way swtich complete all as specified and directed. Note: 1. Conduit shall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible. 2. Connections of cable with MCBs or switch/sockets shall be done through proper size copper/brass pin/U type thimbles.

All as per Ser item No 2 here in before but for one light point controlled by two 2 way switch.

All as per Ser item No 2 here in before but for one 5 Amp socket outlet point on same board controlled by one switch 5 Amp one way.

All as per Ser item No 2 here in before but for one 5 Amp socket outlet points controlled by one switch 5 Amps one way on independent board.

All as per item No. 2 here in before but for one above but one 15Amp socket point concealed with 3x2.5 Sqmm FRLS PVC insulated multi-strand copper conductor.

M & L for point wiring using 3 x 1.5 Sqmm FRLS PVC insulated unsheathed /multi stranded copper conductor cable(Phase, neutral and earth wire) drawn through existing conduit and connected to common earth dolly with 1.6 mm thick cadmium plated CI/GI pressed steel sunken boxes and 3 mm thick plastic laminated sheet cover fixed with brass screws or approved make sunken modular metal flush gang box and suitable support frame and cover plate (inner/outer) of required modules for one light/fan/bell point controlled by one 1way switch complete all as specified and directed. Note: 1. Connections of cable with MCBs or switch sockets shall be done through proper size copper/brass pin/U type thimbles.

All as per Ser item No 7 here in before but for one 5 Amp socket outlet point on independent board controlled by one switch 5 Amp one way.

All as per Ser item No 7 here in before but for one 5 Amp socket outlet points controlled by one switch 5 Amps one way on same board.

All as per Ser item No 7 here in before but for one light point controlled by two 2 way switch.

All as per Ser item No 7 here in before but for one above but one 15Amp socket point with 3x2.5Sqmm FRLS PVC insulated multi-strand copper conductor.

S & F in replacement switch piano flush button single pole one way 5 Amp 240 volts, complete all as specified and directed.

S & F in replacement socket outlet 2 in 1, 3 pin, 5 Amps, flush type with shutters, 240 volts all as specified and as directed.

S & F in replacement switch 15 Amps, flush type with shutters, 240 volts all as specified and as directed.

S & F in replacement socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type, 240 volts all as specified and as directed.

S & F in replacement stepped type electronic fan regulator flush type Socket type on the existing phenolic laminated sheet etc. not less than 100 W flush type complete all as specified and directed.

S&F in replacement ceiling rose PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals complete all as specified and directed.

S & F in replacement switch piano flush button single pole two way 5 amp 240 volts, all as specified and as directed.

Supply and Fixing in replacement the modular switch one way 10 Amp one module, front operated complete all as specified and directed.

S&F in replacement socket modular socket 10 Amp, 2/3 Pin combined multipurpose, 2 module, complete all as specified and directed.

Supply and Fixing in replacement the modular switch piano type flush button single pole 16 Amp one module, front operated complete all as specified and directed.

S&F in replacement socket in replacement modular socket 6 Amp/16 Amp, 2/3 Pin multipurpose, 2 module, complete all as specified and directed.

Supply and Fixing in replacement the modular switch two way 10 Amp one module, front operated complete all as specified and directed.

S & F in replacement fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 120W- 2 module including necessary connections complete all as specified and directed.

S&F in replacement fancy type Lamp holder jumbo, PVC/Polycarbonate type with back plate including 15Watt LED Lamp complete all as specified and directed.

Taking down carefully unsv copper/aluminium sub main wiring of any size including old broken steel/PVC conduit and removing materials to store for keeping in safe custody for taking credit complete all as specified and directed.

S&F in replacement sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x10 Sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 10 Sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in existing concealed conduit complete all as specified and directed.

All as per Ser Item no 27 here in before but of size 2x6 Sqmm.

All as per Ser Item no 27 here in before but of size 2x4 Sqmm.

All as per Srl item No 27 here in before but for size 4 Sqmm drawn in and including suitable size concealed rigid heavy grade PVC conduit not less than 20mm dia 1.8mm thick and making good to the disturbed surface of wall/floor with cement mortar and finishes to match existing surface acomplete all as specified and directed.

S&F in replacement 20W surface / wall mounted box type batten LED luminaire having PDC aluminium housing and PC diffuser and integrated electronic driver with high efficiency, CRI = 80 (Minimum), PF > 0.95, luminous efficacy ≥ 120 lumens/Watt operating voltage 140V-240V, CCT≥5700+/-300K, THD < 10% complete with all accessories internally prewired and including connecting up with 3 core flexible copper conductor cable of suitable size in flexible conduit pipe of suitable size from ceiling rose to connector of LED fitting complete all as specified and directed.

S&F in replacement surface mounted 10 Watt 2' box type LED batten as mirror light with wall mounting arrangment including connecting up with 3 core flexible copper conductor cable of suitable size in flexible conduit pipe of suitable size from ceiling rose to connector of LED fitting complete all as specified and directed.

S&F in replacement Energy saving, surface mounted, bulk head LED luminaire 10 W with PDC aluminium housing and polycarbonate diffuser complete including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in replacement box type LED recess mounted panel 36/40watt suitable for 2x2 ceiling, having polycarbonate housing and and high quality diffuser for glare free light , inbulit with efficacy> 120Lm/W, CRI>80 with 5700+/-300K CCT including connecting up with 3 core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in replacement box type LED pendant luminiarie 2 x 20W including suspension of upto 1.5meter having powder coated PDC aluminium body and high quality diffuser for glare free light , inbulit with efficacy> 120Lm/W, CRI>80 with 5700+/-300K CCT including connecting up with 3 core flexible copper conductor cable of suitable size in flexible conduit pipe of suitable size from ceiling rose to connector of LED fitting complete all as specified and directed.

Supply and fix in replacement recess/surface mounted 18Watt round/square LED panel having polycarbonate housing and high qaulity diffuser, inbuilt driver, efficacy ≥120Lm/W, CRI>80 with 5700+/-300K CCT complete with locking arrangement complete all as specified and directed.

S & F in replacement SPN MCB DB 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar of rating not less than 100Amps, insulated neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete all as specified and directed.

All as per Ser Item No 37 here in before but for size 4way DB.

S&F in replacement MCB SP 240V, 50Hz of rating 6 to 32 Amp with breaking capacity of 10 kA having bi-connect terminals on the bottom terminals for looping and 35Sqmm termination capacity on both terminals with insulated sliding shutters and two position DIN rail clamp for easy mounting complete all as specified and directed.

All as per Ser item No 39 here in before but for size 32 Amps MCB SPN.

All as per Ser item No 39 here in before but for size 40-63 Amps MCB SP.

All as per Ser item No 39 here in before but for size 40-63 Amps MCB SPN.

S&F in replacement sheet metal enclosures double door VTPN MCB DB 4 way 415 V AC, 50 Hz with IP 43 and IK 09 protection having fully insulated copper busbar of rating not less than 250Amps, insulated neutral bar, earth bar and cable ties for cable management and polyuthrene gasket incl MCCB 63 Amps 4 Pole, 16kA fixed thermal and fixed magnteic setting and flush mounting into the wall and making good the disturbed surface and matching with the existing specification complete all as specifiedcomplete all as specified and directed. Note: MCBs will be measured and paid saperately.

M&L for repair to existing switch board by taking out the old existing ser/unsv switches, sockets, regulators any type and refixing the serviceable switch/sockets after replacement of old unsv/broken Hylum sheet of thickness not less than 3mm of size upto 5"x5" complete all as specified and directed.

Same as per item No 44 above but of size 8"x5"

Same as per item No 44 above but of size 9"x11"

S&F concealed GI sheet metal sunken box (16 Guage) incl Modular cover plate with support frame(inner and outer) upto 3 module rectangular shaped incl flushing GI sunken box in the wall and making good the disturbed surface complete all as specified.

All as per Srl item No 47 here in before but for size 4/6 module.

All as per Srl item No 47 here in before but for size 8 module rectangular or Square.

Taking down carefully serviceable single phase energy meters from meter box after carefully disconnecting the electrical connections, dismantling old burnt/unsv meter box and refixing the dismantled meters at same or other location incl making electrical connection with exisitng cable drawn through suitable size flexible conduit pipe and making good the disturbed surface and matching with existing surface complete all as specified and directed.

S & F in replacement decorative wall mounting LED bed side light 3 watt 3000K fitting having flexible neck complete all as specified and directed.

Deduct Total amount of SCHEDUL 'A' SECTION-II (SCH OF CREDIT) Rs 66,635.00 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.

M/S SATPAL & BROTHERS

M/S SHRI RAM BUILDERS

M/S HIMANSHU BUILDERS

M/S BHATIA CONSTRUCTION

KULBHUSHAN AGGARWAL