Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.7 LAccepted-AOC 53 HOUSING BOARD COLONY PHASE II UDHAMPUR 182101 J K | UDHAMPUR | UDHAMPUR | J K | 182101 | L1 | Accepted-AOC L1 | |
| 2 | L2₹40.8 L+₹6,900 (0.17%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹41.8 L+₹1.1 L (2.70%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹42.5 L+₹1.8 L (4.46%)Rejected-Finance NEAR MES FILTER PLANT SANGOOR UDHAMPUR J K 182101 | UDHAMPUR | UDHAMPUR | J K | 182101 | L4 | Rejected-Finance OTHER THAN L1 | |
| 5 | L5₹66.9 L+₹26.2 L (64.3%)Rejected-Finance HOUSE NO 108 WARD NO 08 SHAKTI NAGAR DHAR ROAD UDHAMPUR UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L5 | Rejected-Finance OTHER THAN L1 |
Tender Value
Refer Docs
EMD Value
₹74,800
Closing Date
19 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (UTILITIES) UDHAMPUR
GE (UTILITIES) UDHAMPUR, PO-GARHI, PIN-182121
Provn of lightening to deficient security lights system in the premises of Offrs Md Accn under GE(Utilities) Udhampur.
2022_MES_540255_1
GE/U-33/2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE (UTILITIES) UDHAMPUR
please refer Tender documents
8 documents required · 8 mandatory
₹500
GE (UTILITIES) UDHAMPUR
₹74,800
Yes
20 Oct 2022
22 Jul 2022
23 Aug 2022
22 Jul 2022
19 Aug 2022
5 Aug 2022
Amount
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of under ground cable and getting out in soft/ loose soil complete all as specified and directed by Engr-in-Charge.
All as per serial item No. 1.00 here in before but depth exceeding 1.5m but not exceeding 3m complete all as specified and directed by Engr-in-Charge.
Returning, filling in, excavated soil in trenches including spreading , levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr-in-Charge.
Removing of excavated soil to a distance not exceeding 50mtr and deposited where directed at a level not exceeding 1.5 mtr above starting point complete all as specified and directed by Engr-in-Charge.
Plain cement concrete M-7.5(1:4:8), type D2, (using graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engr-in-Charge.
Plain cement concrete M-15 (1:2:4), type B1 (using 20mm graded aggregate) as in coping and footings for poles etc including necessary form work complete all as specified and directed by Engr-in-Charge.
Steel tubular swaged poles erected to truly vertical or planted as strut complete with 6mm thick mild steel base plate(300mmx300mm), welded to pole, finial taper plug, bolts, nuts, and screws. Poles made out of ERW MS tubing conforming to IS-2713 Part-II Type 410 SP-37, (9 mtr) long including drilling of holes of required size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminum paint over a coat of red oxide zinc chrome primer and with two coats of black bitumenous paint internally and portion embedded in concrete, making five black & white bands at lower portion of pole each 300mm wide alternately upto the height of 1.5 m and marking pole No. with black paint at suitable height including making two nos holes of suitable size in steel tubular pole by gas welding for passing PVC cable connection from junction box to security lights through pole where junction box to be fitted in pole complete all as specified and directed by Engr-in-Charge. Note: - Excavation, Earth Work and PCC in foundation shall be measured and paid for separately.
Steel tubular swaged poles erected to truly vertical or planted as strut complete with 6 mm thick mild steel base plate, welded to Pole, B-118 finial taper cap, bolts, nuts and screws, poles made out of ERW MS tubing conforming to IS-2713 Part-II type 410-SP-31 (12 m long) including drilling of holes of required size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminum paint over a coat of red oxide zinc chrome primer and with two coats of black bituminous paint on the and portion embedded in concrete, making five black and white bands at lower portion of pole above ground level/coping each 300 mm wide alternately and marking pole number. with black paint at suitable height complete all as specified and directed by Engr-in-Charge. Note: - Excavation, Earth Work and PCC in foundation shall be measured and paid for separately.
Cross arms, bracings, supports , clamps and back plate fabricated from structural steel sections including nuts, bolts , washers , welding, bending cold or hot , drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat , one under coat and one finishing coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
XLPE insulated , armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade capacity 3.5 core 50sq.mm cross section area complete all as specified and directed by Engr-in-Charge.
All as per serial item No 10.00 here-in-before but of size 3.5 core 25sq.mm.
All as per serial item No 10.00 here-in-before but of size 2 core 6 sq.mm .
DWC (Double wall corruguated) pipe 50x38 mm conforming to IS: 14930/ IS 16205 for protection of earth strip including necessary snap-fit coupler required for fixing complete all as specified and directed by Engr-in-Charge .
LED street light fitting with dusk down (sensor) 60 Watt , 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts complete all as specified and directed by Engr-in-Charge. Note :- Necessary fixing assembly including reducers shall be included in the quoted rate. Make:-Polycab Cat part No. PUB0506323W or equivalent in Havells/ Bajaj/CG/Wipro/Philips.
LED Flood light fitting 120Watts, IP66, Energy Saving LED light with PDC , Aluminium body & secondary Optical lens for superior light distrubution , Efficacy > 110 Lm/W. 5700k complete all as specified and directed by Engr-in-Charge. Make-Polycab Cat part No.PCGLSC501 120W or equivalent in Havells/Bajaj/ CG/Wipro/Philips.
LED Post Top light fitting 40Watts, IP66, Energy Saving LED light with PDC , Aluminium body & secondary Optical lens for superior light distrubution , Efficacy > 110 Lm/W. 5700k complete all as specified and directed by Engr-in-Charge. Make : Polycab Cat Part No. PGR0201010 or equivalent in Havells/ Bajaj/CG/Wipro/Philips.
Supply, installation, testing & commissioning of ornamental pole 4 mtrs height foundation top level. The following parameter shall be incoperated in ornamental pole:- Height = 4 mtrs. Bottom section - cast iron pedstal type. Embellishment - FG 15 Grade. Middle section - Mild steel grooved pipe. Pipe - Mild steel bracket with aluminium/cast iron emblishment. Bottems Column - Shall incoperated integral inbuilt looping box. Paint - Pole shall be painted with primer & paint ( 02 coats) with polyerathane. Antique colour finish. Bracket - Angle iron bracket made out of different sections of mild steel tubes. Joints cast iron with necessary painting as per directions. Thickness of pipe 3.2mm thick. Fitting - 50 W( Milky white/warm light) IP-65. Foundation - Foundation shall be bolted with parmanent fastness,MCB connection and bakaliate plate. Weight of pole - 145 Kgs Hanging - weather proof hanging light fitting made of aluminium/ pressure die cast housing single piece bottom up to mounting of 60mm outer dia of pole / pipe , Size of fitting 580mmx340mm with opal froasted protector duly silicon filled , UV resistant PU/ Powder coated paint Lacquer coated. As antique finish with highly efficency electronic external driver, high voltage protection. Make- DM Enterprises cat No-DM-8010-BKT-05-12-6025/ Havells/Kesclec/crompton/philips/palaza.
Automatic street light control switch( in replacement) of 8 KW three phase using Infrared sensor based Nature Switch for automatic switching of street light. Nature switch operation should be based on Natural Light Lux*level. Reqd illuminance level also have part night operation facility for min 4 hrs to max 12 hrs. The sensor along with suitabe rating power contactor (s), one Incoming and three Outgoing MCBs rating of 20-32 Amps & main load circuit wiring (copper) of min 10 sqmm should be enclosed in a pole/wall mountable rust proof, electric shock proof, termite proof and FR grade thermoplastic polycarbonate enclosure conforming to IP66 protection class-2 (Hansel make). The circuit should be also have provision for manual operation (i.e. sensor by pass option) complete all as specified and directed by Engr-in-Charge. Make: Model No SWADEEP 66- 8 KW3P/L&T /Havells/ Indo asian
D P ASSOCIATES
proach associates
FANGALIA TRADERS
slathia construction works
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .