REPAIR MAINTENANCE OF INTERNAL WIRING FITTING FIXTURES IN OFFICERS MD ACCN OFFICERS MESS AND OLD BLDGS INCLUDING MAP OFFICERS MD ACCN UNDER AGE EM N OF GE NORTH SECUNDERABAD

Amount

Taking down the existing unserviceable point wiring of any description, type, size of light or fan or power or two way or bell etc on TW batten or conduit including removal of batten or conduit or gutters or wooden boards or switches or sockets or regulators or light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall or ceiling to match with the existing surfaces complete all as specified and as directed.

Material and labour for point wiring complete with stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded drawn through and including rigid 20mm dia PVC medium grade conduit and conduit accessories duly ISI marked concealed in walls etc., with sunk type pressed steel terminal boxes with suitable size for mounting of modular switches including fixing/grounting sunken/surfaces as per site requirement covered with suitable modular white cover plate for fixing switches/sockets/regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces complete for the following :- (a) One light / bell point controlled by one, one way switch 5 amps, single pole

(b) One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One light point controlled by two, two way switch 5 amps,.

(f) One 3 pin 5amps socket outlet independent but below the switch board of light points in the same vertical plane

All as per item No. 2.00 here in before but using 2.5 square millimetre single core copper conductor cable of multistranded PVC insulated unsheathed 1100 volts grade FRLS confirming to IS-694 for 3 pin 15 amps switch socket combination point on independent board and running of 2.5 square millimetre copper conductor PVC insulated cable FRLS as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed

Material and labour for point wiring complete with multistranded copper conductor of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS confirming to IS - 694 multistranded drawn through the existing conduit of any dia, with new sunk type pressed steel terminal boxes suitable for switches duly painted with two coats of red oxide zinc chrome primer with suitable hylem sheet cover of suitable size for mounting of switches, regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 Volts grade FRLS confirming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and removing the old wiring for the following :- (a) One light point / Bell point controlled by one, one way switch 5 amps, single pole

(b) One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per Sl item No 9 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm copper conductor FRLS PVC insulated cable as earth continuity conductor complete all as specified and directed.

Supply and fix for switch piano, flush type single pole, one way 5 Amps complete all as specified and directed.

Supply and fix socket outlet 2 in 1, flush type multi purpose 5 pin, 5 Amps complete all as speicified and directed.

Supply and fix Switch socket combination 2 in 1, 3/5 pin, 5 and 15 Amps flush type complete all as specified and directed.

Supply and fix Switch MODULAR 1 WAY 6 amps, 1 module complete all as specified and directed.

Supply and fix Switch MODULAR two way 6 amps, 230 volts, 1 module complete all as specified and directed.

Supply and fix bell push MODULAR type 6 amp SP, 230 volt AC complete all as specified & directed.

Supply and fix MODULAR socket 2/3 pin 6 amps 2 MODULE, 230 Volts complete all as specified and directed.

Supply and fix MODULAR socket 2/3 pin 16 amps 2 MODULE, 230 Volts complete all as specified and directed.

Supply and fix 5 stepped type , heavy duty, Modular ceiling fan regulator AC 230 volts complete all as specified and as directed

Supply and fix Modular switch one way, 16 Amps, 1 Module 230 volts complete all as specified and as directed.

Supply and fix bidirectional fancy holder with plate(Metal Ring) complete all as specified and as directed.

Supply and fix Ceiling rose of surface Bakelite 65 X 50 mm, three terminals, AC 50 HZ, 230 Volts complete all as specified and as directed

supply and fix bell ding dong type working on 230 volts single pole AC supply complete all as specified and as directed.

Supply and fix fan regulator, 5 stepped, electronic type, single phase, socket size complete all as specified & directed.

Supply and fix wall mounted LED batten integrated electronic driver 1 x 20w, 230 volts, bipin holders, DIFFUSED TYPE connector block internally prewired etc with necessary mounting arrangements including 02 Nos PVC round block with all accessories with new 3 core multi stranded copper conductor of size 23/0.193 from ceiling rose to fitting and including LED Tube 20W all as specified and as directed. MAKE: C & S Cat Part No - LTIC00120WLED/WD, Havells Cat Part No- REGALBATTENT8UPTO1x22WSSBSWH including Tube Rod Cat No PHOTONULTRA1213T8SSTL20WLWD865SPC and Bajaj Cat Part No- BLRB21W CWC including Tube rod Cat No - BLRB21W CWC.

Supply and fix LED security light luminaire fitting of 1x25 watts with deep drawn housing including all accessories with 25 mm dia light grade GI pipe bracket 0.60 Mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts complete all as sepcified and as directed. Make: C&S Cat Part No- LTESS25WLED/LS, Havells Cat Part No-ENDURAPEARLSL25WLED75 7SASYTOPSCMP and Bajaj Cat Part No-BCLST25WLED

Supply and fix recess mounting indirect with perforated sheet with electronic driver luminaire 36 watts LED soft line new with central opal diffuser series mounted in ceiling surfaces including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. MAKE: C&S Cat Part No- LTCRSLM36WATT2'x2', Havells Cat Part No-ENDURASLIMPROPLUS2X 2PLR36WLED840MOD +LEDDRIVER36V36WS.

Supply and fix INTEGRA NEO LED surface panel light (round) 10 Watts complete with all accessories all as specified and as directed Make: Havells CAT No INTEGRANEOSURFACED LL10WLED830S or equivalent in C & S/Wipro.

Supply and fix wall mounted LED batten integrated electronic driver 1 x 10W, 230 Volts, DIFFUSED TYPE connector block internally prewired etc with necessary mounting arrangements with all acessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including taking down existing unserviceable light fitting all as specified and as directed. MAKE: Havells CAT No LUMILINEPLUSBS10WLED865SPCSS or equivalent in Philips/Wipro/crompton Greaves.

Supply and fix vertical type TPN distribution board of 4 way double door with and including incoming MCCB FP 415 volts AC, 3 phase, 50 Hz, 10 KA Breaking Capacity with fixed magnetic setting for current ranging of capacity 100 Amps confirming to IS 13947 (P-2) IEC: 947 made out of CRCA sheet housing with powder coated confirming to IS 13032, IS 8623, BS 5486 accomadated suitably in a mild steel enclosure weather proof made out of 3 mm thick mild steel sheet having hinged and robust locking arrangement including painting by red-oxide one coat and duly powder coated complete all as specified and as directed. DB Make : Havells Cat No DHDLVDRWGOFO04 or equivalent in C & S/Schnider/Legrand MCCB Make : Havells Cat Part No 1HLGSF0100 or equivalent in C & S/ Schneider /Legrand

Supply and fix sheet metal enclosure MCB DB SPN 4 Way with 200 Amps rated bus bar 240 Volts, double door with magnetic locking system for fixing MCB’s / isolators complete all as specified and as directed. Make : Havells cat No: DHDPSHODRW04 /DHDPSHODPW04 or equilent to C & S Schneider / Legrand

Supply and fix sheet metal enclosure MCB DB SPN 6 Way with 200 Amps rated bus bar of, 240 Volts, double door with magnetic locking system for fixing MCB’s / isolators complete all as specified and as directed. Make : Havells cat No: DHDPSHODRW06/ DHDPSHODPW06 or equilent to C & S Schneider/ Legrand

Supply and fix sheet metal enclosure MCB DB SPN 8 Way with 200 Amps rated bus bar of, 240 Volts, double door with magnetic locking system for fixing MCB’s / isolators complete all as specified and as directed. Make : Havells cat No: DHDPSHODRW08/ DHDPSHODPW08 or equilent to C & S Schneider / Legrand

Supply and fix MCB SP 6 to 32 amps 240 volts 'C' curve suitable for fixing in MCB DB complete all as specified and as directed.

Supply and fix MCB SPN 40 to 63 amps 240 volts 'C' curve suitable for fixing in MCB DB complete all as specified and as directed.

Supply and fix MCB TPN 63 amps 415 volts of 'C' series, 10 KA breaking capacity & Connection in any type of DB (Indoor/outdoor) complete all as specified and as directed.

Material and labour sub main wiring with 2 runs of single core10 sqmm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit concealed and conduit accessories of medium grade 25 mm dia including one run of single core 10 sqmm FRLS PVC insulated unsheated multistandard 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from distribution board to distribution board main board including removing the existing unserviceable sub main wiring and making good the disturbed wall surfaces to match with the sorroundings complete all as specified and as directed. Note: 3 runs of 10 sqmm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit .

Material and labour for sub main wiring with two runs of single core FRLS PVC multistranded stranded unsheathed copper conductor cable of size 6 square mm and drawing through PVC conduit of 25mm dia medium grade with accessories duly concealed in walls along with one run of 6 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board including removing the existing wiring and making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 3 runs of 6 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit .

Material and labour for sub main wiring with two runs of single core 4 sqmm FRLS PVC insulated, multistranded unsheathed copper conductor cable of size 4 square mm and drawing through PVC conduit medium grade with accessories of 20 mm dia duly concealed along with one run of 4 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board including removing the existing wiring and making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 3 runs of 4 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit .

Supply and fixed in repairs Switch piano 5Amps capacity flush type single pole one way 230Volts complete all as specified and directed

Supply and fixed in repairs Switch piano 15Amps capacity flush type single pole one way 230Volts complete all as specified and directed

Supply and fixed in repairs socket oulet flush type multipurpose 5 pin 5 amps, 230 Volts complete all as specified and as directed.

Supply and fixed in repairs socket oulet flush type multipurpose 5 pin 15 amps, 230 Volts complete all as specified and as directed.

Supply and fixed in repairs socket combination 2 in 1, multipurpose 5 pin 5 amps, flush type, 230 Volts complete all as specified and as directed.

Supply and fixed in repairs socket combination 2 in 1, multipurpose 6 pin 15 amps, flush type, 230 Volts complete all as specified and as directed.

Supply and fixed in repairs Modular switch 1 way 6 A, 1 Module 230 volts complete all as specified and as directed

Supply and fixed in repairs Switch MODULAR two way 6 amps, 230 volts, 1 module complete all as specified and directed.

Supply and fixed in repairs Modular bell push of 6 Amps SP, 230 volts AC complete all as specified and directed.

Supply and fixed in repairs MODULAR socket 5 pin 6 amps 2 MODULE, 230 Volts complete all as specified and directed.

Supply and fixed in repairs MODULAR socket 6 pin 6/16 amps 2 MODULE, 230 Volts complete all as specified and directed.

Supply and fixed in repairs Modular ceiling fan regulator 5 stepped type heavy duty suitable to work on 230 volts complete all as specified and as directed

Supply and fixed in repairs Switch MODULAR 1 WAY 16 amps, 230 Volts complete all as specified and directed.

Supply and fixed in repairs bidirectional fancy holder with plate (Metal ring) complete all as specified and as directed.

Supply and fixed in repairs ceiling rose of surface Bakelite 65 X 50 mm, three terminals, AC 50 HZ, 230 Volts complete all as specified and as directed

Supply and fixed in repairs Call bell ding dong type 230 Volts AC complete all as specified and as directed

Supply and fixed in repairs MCB TPN 63 amps 415 volts of 'C' series suitable for fixing on existing MCB DB complete all as specified and as directed.

Supply and fixed in repairs MCB TPN 32 amps 415 volts of 'C' series suitable for fixing on existing MCB DB complete all as specified and as directed.

Supply and fixed in repairs MCB SPN 6 to 32 Amps 240 Volts 'C' curve suitable for fixing in MCB DB complete all as specified and as directed.

Supply and fixed in repairs MCB SP 6 to 32 Amps 240 Volts 'C' curve suitable for fixing in MCB DB complete all as specified and as directed.

Supply and fixed in repairs MCB TP 63 Amps 240 Volts 'C' curve suitable for fixing in MCB DB complete all as specified and as directed.

Supply and fixed in repairs PVC rectangular box (Gang box) with MODULAR type switch socket combination for 5 Pin, 6 Amps 240 Volts AC fixing in surface complete all as specified and directed.

Supply and fixed in repairs PVC rectangular box (Gang box) with MODULAR type switch socket combination for 6 Pin, 16 Amps 240 Volts AC fixing in surface complete all as specified and directed.

Supply and fixed in repairs PVC rectangular box (Gang box) with piano type switch socket combination for 5 Pin, 6 Amps 240 Volts AC fixing in surface complete all as specified and directed.

Supply and fixed in repairs PVC rectangular box (Gang box) with piano type switch socket combination for 6 Pin, 16 Amps 240 Volts AC fixing in surface complete all as specified and directed.

Supply and fixed in repairs Rigid PVC conduit 20 mm dia and making good to distrubed surface to match with the existing surface complete all as specified and as directed

Supply and fixed in repairs Rigid PVC conduit 25 mm dia and making good to distrubed surface to match with the existing surface complete all as specified and as directed

Supply and fixed in repairs ON LOAD change over switch 4P 415 volts in sheet metal enclosure capacity 100 Amps and connecting complete all as specified and as directed. Make: Standard Cat part No 1SCNFE0100 or equivalent model in Havells / C& S

Supply and fixed in repair concealed MODULAR box (Metal) for mounting of 2 & 3 module plate and making good the surface to match the existing surface complete all as specified and directed.

Supply and fixed in repair concealed MODULAR box (Metal) for mounting of 4 & 6 module plate and making good the surface to match the existing surface complete all as specified and directed.

Supply and fixed in repair concealed MODULAR box (Metal) for mounting of 8 module plate and making good the surface to match the existing surface complete all as specified and directed.

Supply and fixed in repair MODULAR plate for 2 & 3 module, regular white for fixing on existing metal box complete all as specified and directed.

Supply and fixed in repair MODULAR cover plate for 4 & 6 module, regular white for fixing on existing metal box complete all as specified and directed.

Supply and fixed in repair MODULAR cover plate for 8 module, regular white for fixing on existing metal box complete all as specified and directed.

Material and labour for cutting chases, pining to making good to facing where ever required and pointing in cement motor 1:3 to ends or edgs of endings, steps, cills etc and cutting chases for concealed wiring making good and cutting not exceeding10 cm grith complete all as specified and directed

Supply and fixed in repairs 5 step type electronic ceiling fan regulators flush type complete all as specified and as directed.

Supply and fixed in repair Ballast electronic suitable for 36/40 Watts ABS housing FTL fitting complete all as specified and as directed Make : Havells LHGEAFBBDPA1036 or equivalent in Bajaj/CG

Supply and fixed in repair Ballast electronic suitable for 2x36Watts CFL fitting complete all as specified and as directed Make: Havells cat No LHBF07204027 equivalent in Bajaj/CG

Supply and fixed in repair Ballast electronic suitable for 18/20 Watts FTL fitting complete all as specified and as directed Make :Bajaj/CG

Supply and fixed in repair Ballast electronic suitable for 1 x 14 T-5 Watts FTL fitting complete all as specified and as directed Make :Bajaj/CG

Supply and fixed in repair Ballast electronic suitable for 1 x 28 T-5 Watts FTL fitting complete all as specified and as directed Make :Bajaj/CG

Supply and fixed in repair Tube Rod suitable for 1 x 28 T-5 Watts FTL fitting complete all as specified and as directed Make :Bajaj/CG

Supply and fixed in repair Ballast electronic suitable for 9/11 Watts CFL fitting complete all as specified and as directed Make: C&S Cat No LTAHFB109xII equivalent in Bajaj/CG

Supply and fixed in repair CFL 2 pin type 9 Watts complete all as specified and as directed.

Supply and fixed in repair CFL 4 pin type 36 Watts complete all as specified and as directed.

Supply and fixed in repairs driver for LED light fitting 1x36Watt, complete all as specified and as directed.

Supply and fixed in repair LED coloured bulb 0.5 watts complete all as specified and directed.

Supply and fixed in repair starter suitable for 36/40 watts tube light complete all as specified and as directed.

Supply and fixed in repair bipin holder suitable for any type of tube light fiting complete all as specified and as directed .

Material and labour for earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanised iron pipe with funnel wire mesh for watering and connecting to main switch board / control board all s shown in electrical plate No 3 of SSR Pt - I connected to earthing test point and including testing on completion taking down existing unserviceabale earthing complete all as specified and as directed. NOTE: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate in pit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia CTD bars @ 100mm centre to centre both ways, in lieu of CI cover with CI frame hinges, galvanised iron funnel with watering pipe, wire mesh, complete in addition to item No. 3(a) to (e) of preamble (Notes) under sub heading earthling, specified in SSR Part II

Taking down ceiling fans 1200/1400 sweep and exhaust fan 230/300 sweep, cleaning the dust properly, oiling and greasing of bolts and bearings including refixing and connecting up complete all as specified and as directed . Note : Defective /worn outparts shall be measured and paid separetely under relevant items.

Supply and fixed in repair capacitor 2/2.5 mfd complete all as specified and as directed . Make - Asian/Usha/Epcos of siemens

Supply and fixed in repair capacitor3.15/4 mfd complete all as specified and as directed . Make - Asian/Usha/Epcos of siemens

Supply and fixed in repair sealed ball bearing for ceiling fans complete all as specified and as directed . Make: SKF/TATA

Supply and fixed in repair twisted three core Multistranded copper conductor of size 23/0.193 from connector to the ceiling rosecomplete all as specified and as directed .

Supply and fixed in repairs Gun metal bush copper alloy suitable size for ceiling fan complete all as specified and as directed .

Supply and fixed in repairs 'U' type MS clamp, bolt, nut and split pins of heavy duty suitable to ceiling fan complete all as specified and as directed .

Supply and fixed in repairs Mild steel rod for ceiling fans of 3ft long duly screwed threads with check nuts & pin for ceiling fan complete all as specified and as directed .

Supply and fixed in repairs Nut and bolts, washers for fixing of fan blades to ceiling fan of any make/size/type (6 Nos for each set) complete all as specified and as directed .

Material and labour for rewinding of fans as per details given below with super enameled copper wire of suitable size for any make/type/model including Transporation duly taking down and refixing after winding complete all as specified and as directed:-. (a) Ceiling fans of 1200/1400 mm Sweep

(b) Exhaust fan of 230/300 mm Sweep

Taking down the ceiling/exhaust fan of any sweep/make for over hauling i.e. opening of fan and cleaning ball bearing, filling grease/oil and changing of unserviceable cotter pin, nut, screw, check nuts and bolts as required including. cleaning of body, blades, down rods, canopies etc and re-assembling & hanging the same in the position complete all as specified and as directed. Note: Spare parts will be measured and paid seperately under respective items of schedule.

Material and labour for Spray painting fans of any size with two coats of synthetic enamel paint complete all as specified and as directed..

Taking down the geysers of any capacity from its mounting position by removing all water and electric connections and de-assembling the geyser and carrying out the following works, replacing the worn out parts complete all as directed by Engineer-in-charge. (a) Descaling, cleaning the inner tank thoroughly and there should not be any bed test of water. (b) Examining the water tightness of storage tank after cleaning. (c) Examining the physical condition of thermostat, base assembly fusible plug and outer tank for its serviceability. (d) Inspection of pilot lamps. (e) Reassembling the geyser parts and testing including checking all electrical system (ensuring there is no current leakage) and also conducting hydraulic testing. (f) Re-fixing the Geyser and making electric connections, inlet and outlet water connections and testing and checking of all water inlet, outlet valves connected with geysers. Note : (i) Spares required for replacement of defective/ worn out parts shall be measured and paid separately. (ii) Unit rate quoted shall be deemed to include minor items i.e. nut bolts, screws, lugs etc .

Supply and fix rubber PVC gasket to ensure water tightness for 25/35Litres capacity complete all as specified and as directed

Supply and fix rubber PVC gasket to ensure water tightness for 50 Litres capacity complete all as specified and as directed

Supply and fix mild steel base plate cup of any type with screws of suitable size complete all as specified and as directed

Supply and fix heating element of the 1/1.5 KW rating including rubber washers of any make and type complete all as specified and as directed

Supply and fix heating element of the 2KW rating including rubber washers of any make and type complete all as specified and as directed

Supply and fix copper inner tank for 25 litres capacity geyser complete all as specified and as directed.

Supply and fix copper inner tank for 50 litres capacity geyser complete all as specified and as directed.

Supply and fix thermostat for the geyser of 25 to 35 litres capacity complete all as specified and as directed

Supply and fix thermostat for the geyser of 50 litres capacity complete all as specified and as directed

Supply and fixed in repairs of PVC insulated multistrandard copper conductor, 1100 Volts grade, un sheathed, 3 core of 2.5 square mm size complete all as specified and as directed

Supply and fixed in repairs industrial type plug top 2 pole with earth plug of 20 Amps of 240 volts capacity complete all as specified and as directed

Supply and fix in repairs sheet steel MS enclosure with a two pin and earth plug and socket with single pole MCB 20 Amps 240 volts complete all as specified and as directed.

Supply and fixed in repairs PVC connection cotton braided heavy duty with brass union/coupling of length 450 mm with rubber washer suitable for 15 mm dia pipe and fixing in position ,superior quality as approved by Engineer-in-charge.

Supply and fixed in repairs PVC connecting tube of 450mm long with two brass adopters suitable for hot water of 15mm dia pipe superior quality complete all as specified and as directed.

Supply and fixed in repairs of Apperture plate assembly for 25/35 ltrs geysers complete all as specified and as directed.

Supply and fixed in repairs of Apperture plate assembly for 50 ltrs geysers complete all as specified and as directed.

Material and labour for painting of geysers 25 ltrs capacity after scraping, cleaning and preparing surface for painting and painting with two coats of white enameled paint of approved make etc complete all as specified and directed

Material and labour for painting of geysers 50 ltrs capacity after scraping, cleaning and preparing surface for painting and painting with two coats of white enameled paint of approved make etc complete all as specified and directed

Supply and fixed in repairs copper inner tank for 25/50 litres capacity geyser including cutting of nut, bolt as required with gas welding cutter and providing new nut, bolts, washers etccomplete all as specified and as directed.

Supply and fixed in repair foundation nuts, bolts & washers heavy duty for fixing of geyser complete all as specified and as directed.

Supply and fixed in repair CP pressure release valve complete all as specified and as directed.

Supply and fixed in repair non return valve vertical screwed both ends for GI pipe 15 mm bore complete all as specified and directed.

Supply and fixed in repair motar kit for fresh air fan of size 200mm sweep, 35 watts, RPM 1290 complete all as specified and directed.

Supply and fixed in repair motar kit for heavy duty exhaust fan of size 230mm sweep, 35 watts, RPM 1400 complete all as specified and directed.

Supply and fixed in repair motar kit for heavy duty exhaust fan of size 300mm sweep, 35 watts, RPM 1400 complete all as specified and directed.

Supply and fixed in repair wall mounted decorative luminaire suitable for retrofit LED 10 watt including 1x10 watt LED bulb complete all as specified and directed. Make - Havells Cat No LHDL07150099 or equivalent to Bajaj/Wipro

Supply and fix in repair Univeral batten fitting for T5 & T8 complete all as specified and directed. Make Havells cat No REGALBATTEN8UPTO 1X22 WDSBSWH or equivalent to Bajaj/Wipro

Supply and fixed in repair Ultra bright LED polycarbonate tube light 20 watt with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders (single side connecion) complete all as specified and directed. Make: Havells cat No PHOTONULTRA1213T8SS T8 SSTL20WLED865SPC or euivalent to Bajaj/Wipro

Supply and fixed in repair Environmental fridendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs complete all as specified and directed. Make: Havells RUGBYNEONFT10W LED86 0SSYM TOPC or equivalent to Bajaj/Wipro

Supply and fixed in repair PVC body for exhaust fan of size 230mm sweep including fan blade complete all as specified and directed.

Supply and fixed in repairs Energy saving, enviornement frindly & robust Highbay/mediumbay LED IP65 luminaire with high efficiency LED light fittings 1 x 80 Watts Lamp 80 Watts complete all as specified and as directed. Make : Havells Cat No BARBRITESAUCERHBP 80WLED75790DTOLTG or equivalent in Philips/ Wipro.

Supply and fixed in repairs CORAL (OPAL) LED post top light fittings 1 x 25 Watts with high efficiency including LED Lamp 25 Watts complete all as specified and as directed. Make : Havells Cat No LHEVBHP7PN6K025 or equivalent in Philips/Wipro.

Supply and fixed in repairs of decorative surface mounting 30W dome shape pendent in green/black finishes inlcuding 1 x 30 Watts FLORID LED lamp and taking down existing old unserviceable fitting complete all as specified and as directed. Make : Havells Cat No LHFHDPE1TN1G020 (FITTING) & LHLDEIEDWL8X030(lamp) or equivalent in Philips/Wipro.

Supply and fixed in repairs of wall mounted decoratives, SS finish fixture with opal glass diffuser suitable for LED filament lamp 2/4 Watt withbase cap B22 incuding taking down existing old unserviceable fitting complete all as specified and as directed. Make : Havells Cat No LHJE01106499/LHJC02108499 (FITTING) & LHLDACEC8U002/004 (lamp) or equivalent in Philips/Wipro.

Supply and fixed in repairs of wall mounted colour changing 5 watt LED batten with options 3000K, 4000K & 6500K all in one fixture incuding taking down existing old unserviceable fitting complete all as specified and as directed. Make : Havells Cat No LHEXBYPNIN1W005 or equivalent in Philips/Wipro.

Supply and fixed in repairs of wall mounted colour changing 10 watt LED batten with options 3000K, 4000K & 6500K all in one fixture incuding taking down existing old unserviceable fitting complete all as specified and as directed. Make : Havells Cat No LHEXBYPNIN1W010 or equivalent in Philips/Wipro.

Supply and fixed in repairs of wall mounted colour changing 20 watt LED batten with options 3000K, 4000K & 6500K all in one fixture incuding taking down existing old unserviceable fitting complete all as specified and as directed. Make : Havells Cat No LHEXBYPNIN1W020 or equivalent in Philips/Wipro.

Supply and fixed in repairs Ultra bright 18 watt LED lamp PL-L with very high efficacy suited for installation in existing 2G11 lamp holders powered by an inegral electronic driver and making rearranging the existing the existing wiring in fitting including taking down existing unserviceable lamp complete all as specified and as directed Make : Havells Cat No PHOTONULRAPLL419TL18 WLED865SPC or equivalent in Philips/Wipro.

Supply and fixed in repairs blade set of four with coupling for 230/300 mm sweep of exahaust fan of any make complete all as specified and as directed

SIRITEL SYSTEMS PRIVATE LIMITED