Loading…
Loading…
Tender Value
₹52.9 L
EMD Value
₹1.1 L
Closing Date
10 Jun 2026, 10:30 pm5d left
Krishna Bhagya Jala Nigam Limited
Providing Power Supply to Narayanpur Dam from Budihal-Peerapur LIS Sub Station, Shifting of existing DG sets provided at Spillway near to TC yard including construction of DG room and Providing new TC for dyke street lighting of Narayanpur Dam
303315
KBJNL/2025-26/EL/WORK_INDENT2754/CALL-2
Open
Electrical
KBJNL Division Dam Division Narayanapur
9 documents required · 9 mandatory
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The intending bidder should have satisfactorily completed (at least 90% of the contract value) as prime contractor at least one similar work such as Execution/Maintenance of 11 kV/33 kV line Work of amount not less than Rs. 32.50 Lakhs. (50% of amount put to tender with GST) during last 5 years reckoned back from 2025-26 (i.e.2021-22 to 2025-26).The certificate should be issued by an officer not below the rank of Executive Engineer of the concerned Division / Equivalent officer and countersigned by the SE of the concerned Circle / next higher officer. The cost will be updated to the present value by giving a weightage of 10% each year, if the work is completed prior to the year 2025-26
The intending bidder should have executed a minimum quantity of following critical items of work (usually 80% of the peak annual rate of construction i.e. (Quantity put to tender x 80 percent) in anyone financial year, during the last five financial years reckoned back from 2025-26
The tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value
The bidder should have achieved a minimum financial turnover in at least two financial years in all civil construction works of not less than the amount Rs. 65.00 Lakhs (usually not less than the estimated annual payments under this contract)
The intending bidder should furnish liquid assets and or availability of credit facilities of not less than amount of Rs. 19.50 Lakhs credit lines/letter of credit/certificates from Nationalized banks for meeting the fund requirements. Usually, the equivalent of the estimated cash flow for 3 months in the peak construction period should be in the prescribed format
The requisite Earnest Money Deposit in e-cash
Valid Employees Provident Fund Registration Certificate along with remitted challans of 6 months from last date of submission of tender
Valid GST Registration Certificate along with remitted challans of 6 months from last date of submission of tender
A valid copy of Class-I Electrical License from Electrical Inspectorate Govt of Karnataka
₹1,330
₹1.1 L
3 Jun 2026
3 Jun 2026
11 Jun 2026
5 Jun 2026
6 Jun 2026
Providing Power Supply to Narayanpur Dam from Budihal-Peerapur LIS Sub Station, Shifting of existing DG sets provided at Spillway near to TC yard including construction of DG room and Providing new TC for dyke street lighting of Narayanpur Dam
RCC Pole - 9 Mtr Long, 145 Kg WL as per IS-785 etc complete with all lead and lifts and as per directions of Engineer in charge
Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth etc complete with all lead and lifts and as per directions of Engineer in charge
Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing-Ordinary Soil etc complete with all lead and lifts and as per directions of Engineer in c...
Supplying of Caution/Danger Board etc complete with all lead and lifts and as per directions of Engineer in charge
Fixing Danger Board etc, complete with all lead and lifts and as per directions of Engineer in charge
GI Barbed wire (12 Mtr/Kg) etc complete with all lead and lifts and as per directions of Engineer in charge
Fixing of GI Barbed Wire (12 Mtr) etc complete with all lead and lifts and as per directions of Engineer in charge
11 kV, Horizontal Cross Arm - Galvanised Iron (GI) etc complete with all lead and lifts and as per directions of Engineer in charge
HT ST Support 50x8 mm Flat - GI etc complete with all lead and lifts and as per directions of Engineer in charge
RCC Pole Clamp - GI etc complete with all lead and lifts and as per directions of Engineer in charge
Fixing of V-Shape/Horizontal cross arm including Single Top Support Brace and Insulator fixing etc complete with all lead and lifts and as per directions of Engineer in charge
DP Set (2 Pole Strucrure Kit) as per IS-1977-For RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole - 9 Mtr Long, 300Kg WL - MS etc complete with all lead and lifts and as per directions of Engineer in charge
Erection of 2 Pole Structure using RCC/PSCC Pole 9 to 10 Mtr long etc complete with all lead and lifts and as per directions of Engineer in charge
EG Stirrup (MS) with GI wire lacing etc complete with all lead and lifts and as per directions of Engineer in charge
Fixing of Earth Guard Stirrup etc complete with all lead and lifts and as per directions of Engineer in charge
H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - MS etc complete with all lead and lifts and as per directions of Engineer in...
Errection of H Frame etc complete with all lead and lifts and as per directions of Engineer in charge
Guy Clamp - GI etc complete with all lead and lifts and as per directions of Engineer in charge
Turn Buckle (GI) etc complete with all lead and lifts and as per directions of Engineer in charge
Anchor Rod using 12 mm rounds/Guy Rod - GI etc complete with all lead and lifts and as per directions of Engineer in charge
No. 15 Strain Insulator etc complete with all lead and lifts and as per directions of Engineer in charge
7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/KM etc complete with all lead and lifts and as per directions of Engineer in charge
Digging of Pit for GUY SET Ordinary Soil etc complete with all lead and lifts and as per directions of Engineer in charge
Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)
Spiral Earth Electrode etc complete with all lead and lifts and as per directions of Engineer in charge
11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod) etc complete with all lead and lifts and as per directions of Engineer in charge
11 kV, 45 kN Polymeric Insulator etc complete with all lead and lifts and as per directions of Engineer in charge
Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM etc complete with all lead and lifts and as per directions of Engineer in charge
Stringing of conductor Squirrel, Weasel, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps.For Rabbit ACSR etc complete with all lead and lif...
Rabbit to Rabbit (P G Clamps) etc complete with all lead and lifts and as per directions of Engineer in charge
9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR (Dwg No. BESCOM/GM/QS&S/26 Dtd 24.10.2007) etc complete with all lead and lifts and as per directions of Engineer in cha...
Fixing of 3 Nos Lightning Arrestor including wiring etc complete with all lead and lifts and as per directions of Engineer in charge
11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018) etc complete with all lead and lifts and as per directions of Engineer in charge
Fixing of GOS including wiring (11 kV Single Break 200 Amps) etc complete with all lead and lifts and as per directions of Engineer in charge
11 kV, DOLO Cutout Conventional to Erstwhile KEB Specification
Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring etc complete with all lead and lifts and as per directions of Engineer in charge
Making and Fixing pot head for HT Cable-Heat shrinkable Type Terminations-3x185 to 3x240 Sqmm etc complete with all lead and lifts and as per directions of Engineer in charge
11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975-240 Sqmm, (55 GI Wires - 3.15 mm Dia)...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 3x185 to 240 Sqmm etc complete with all lead and lifts and as pe...
Dismantling of 11 KV metering cubicle at Narayanpur Dam and shifting to the GESCOM Divisional store including all lead and lift, transportation, labour, etc complete as per the directions of the Engin...
Dismantling of existing 125 KV Generator along with existing control panel and shifting to new location reerrection, testing and commissioning with proper wiring including all lead and lift, cost of t...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975240 Sqmm,...
Supplying of on load change over switches 4 poles,AC-23A Duty,415V,50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution)-400 A etc complete with all lead and lifts and as per dir...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter etc complete with all lead and lifts and as per directions of Engineer in charge
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C etc complete with all lead and lifts and as per directions of Engineer in ch...
Supplying 400 A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which ar...
Fabricating supplying and mounting MS box made out 14 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.-75 x 7...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. -50 x ...
Aluminium End Terminal (Lug)- 240 Sqmm etc complete with all lead and lifts and as per directions of Engineer in charge
Aluminium End Terminal (Lug)- 50 Sqmm etc complete with all lead and lifts and as per directions of Engineer in charge
Aluminium End Terminal (Lug)- 32 Sqmm etc complete with all lead and lifts and as per directions of Engineer in charge
Supply, installation of 4kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 6.9 Kg, empty weight 2.9 Kg, Can Height 440MM, Diameter 140MM, Disch...
Supplying of four bucket stand along with buckets. etc complete with all lead and lifts and as per directions of Engineer in charge
Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick complete including cost of materials, labour, usage charges of machinery complete as per specifications etc complete with all lead and ...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
GI/Copper strips for grounding connections, using necessary fixing materials as required.-50 x 6 mm GI strip etc complete with all lead and lifts and as per directions of Engineer in charge
GI/Copper strips for grounding connections, using necessary fixing materials as required.-600 x 600 x 3 mm GI Plate etc complete with all lead and lifts and as per directions of Engineer in charge
Repairs to the existing 125 KV Diesel Generator by replacig the wornout hose, radiator repair, synthetic enamel spray painting including all lead and lift, cost of transportation, labour, etc complete...
PSCC Pole - 8 Mtr Long, 200 Kg WL (Dwg No. BESCOM/GM/QS&S/49 Dtd 24.11.2018) as per REC Standard etc complete with all lead and lifts and as per directions of Engineer in charge
Erection of RCC/PSCC Pole of 7.5 to 8 Mtr long in a pit of 1.5 Mtr dept etc complete with all lead and lifts and as per directions of Engineer in charge
Digging of Pit 1.6 Mtr depth for erection of 7.5/8 Mtr Long Steel/RCC/PSCC supports as per approved
Drawing-Ordinary Soil etc complete with all lead and lifts and as per directions of Engineer in cha...
Guy Clamp - MS (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018) etc complete with all lead and lifts and as per directions of Engineer in charge
8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM etc complete with all lead and lifts and as per directions of Engineer in charge
Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) etc complete with all lead and lifts and as per directions of Engineer in charge
EG Stirrup (MS) with GI wire lacing etc complete with all lead and lifts and as per directions of Engineer in charge
Guy concreting with Boulders, Mud & Sand As per Drawing No. BESCOM/GM/CP/7/dt: 24.10.07.(with
out cement) etc complete with all lead and lifts and as per directions of Engineer in charge
Double Pole TC Set for erection of Transformer on RCC/PSCC 9 Mtr Long Poles as per IS-1977-For 100/300 kVA 4/5 Star Rated Transformer on RCC Pole - 9 Mtr Long, 145 Kg WL - GI etc complete with all lea...
Erection of Double Pole Transformer Structure using 9 Mtr Long RCC (145 Kg WL)/PSCC (300 Kg WL) Pole including fixing of Structure Materials, Erection of Poles etc., complete for mounting of Transform...
Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014- 63 kVA, Aluminum Wdg, Star 2 (5 Star) etc complete with all lead and lifts and as per directio...
Erection of 25 to 63 kVA Transformer on Transformer Structure etc complete with all lead and lifts and as per directions of Engineer in charge
Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment g...
Digging of Pit for providing GI Pipe type Earthing Ordinary Soil etc complete with all lead and lifts and as per directions of Engineer in charge
Providing GI Pipe Earthing for Lightning Arrester,Transformer Neutral and Transformer Metal parts (Excluding digging of pits) etc complete with all lead and lifts and as per directions of Engineer in ...
Lightning Arrester as per IEC-60099-4- 10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR etc complete with all lead and lifts and as per directions of Engineer in charge
LT Protection Kit (Dwg No. BESCOM/GM/QS&S/10 Dtd 24.11.2018) etc complete with all lead and lifts and as per directions of Engineer in charge
Fixing of LT Protection Kit etc complete with all lead and lifts and as per directions of Engineer in charge
1.1 KV Class HR (Heat Resistant) PVC Insulated & UnSheathed Aluminium Wires Multistrand Single Core Lead wires as per IS 694: 2010- PVC Wire - 50 Sqmm Al Wt: 13.8 Kg, Total Wt: 22 Kg/100 Mtr Coil etc ...
Heavy Duty Copper Terminal Long Barrel etc complete with all lead and lifts and as per directions of Engineer in charge
LT Line Spacer-For TC Wiring (Dwg No. BESCOM/GM/QS&S/38 Dtd 24.11.2018) etc complete with all lead and lifts and as per directions of Engineer in charge
GI Fish Plate etc complete with all lead and lifts and as per directions of Engineer in charge
LT 3 Phase, 4 Wire, CT Operated DLMS Complaint ETV Meter-5A, class 0.5s Accuracy (Used for 25 HP/18KW & Above Installations, DTC Metering) etc complete with all lead and lifts and as per directions of...
Fixing Metering Box for housing the ETV Meter 3 Phase 4 Wire along with CT's, Meter & wiring for DTC-25/63 kVA TC etc complete with all lead and lifts and as per directions of Engineer in charge
LT 3 Phase 4 Wire 5-30 Amps Thread Through Type composite Meter Housing Box consisting of ETV Meter with AMR comply and LTCT with built in GSM/GPRS Modem (as per technical specification) upto 100 kVA ...
11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018) etc complete with all lead and lifts and as per directions of Engineer in charge
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) etc complete with all lead and lifts and as per directions of Engineer in charge
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay Non Modular brick of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) incl...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inc...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Extra for providing mechanical device chain and crank operation for operating rolling shutters: Exceeding 10.00 m² and upto 16.80 m² in the area including cost of materials, labour, usage charges of...
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer- in- charge, (area of grill to be measured) including cost of mat...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing & fixing of 2 track x 2 panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate) finished with a floating coat of neat...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Supplying heavy gauge PVC conduit pipe19/20 mm dia 2 mm thick confirming to IS2509 with suitable size bends, metal /PVC Junction boxes, adhesive pasteetc.,and running before concreting the slab. The c...
Supplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick confirming to IS2509 with suitable size bends, metal /PVC Junction boxes, adhesive pasteetc.,and running before concreting the slab. The con...
Supplying heavy gauge PVC Conduit Pipe 19/20 mm dia 2 mm thick with suitable size bends,metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing Uor J hooks and cem...
Supplying heavy gauge PVC Conduit Pipe 25 mm dia 2 mm thick with suitable size bends,metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing Uor J hooks and cement...
Extra for Groove cutting in brick wall/CCfloor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto 50 mm conduit in brick wall surface etc complete with all lead and...
Short point upto 3Mtr from tapping point to out let via switch etc complete with all lead and lifts and as per directions of Engineer in charge
Medium point above 3Mtr upto 6Mtr from tapping point to outlet via switch etc complete with all lead and lifts and as per directions of Engineer in charge
Wiring for lighting /power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified ...
Wiring for lighting /power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified ...
Wiring for lighting /power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified ...
Wiring for lighting /power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall- 10-...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.-6A One Way switch etc complete with all lead and lifts and as per directions...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.-6A Three Way socket etc complete with all lead and lifts and as per directio...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...
Supplying of LED light fitting 1 x 4'.feet -PVC Batten with integrated LED tube - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: ...
Supplying of 25 x 6 mm GI strip.GI/Copper strips for grounding connections, using necessary fixing materials as required etc complete with all lead and lifts and as per directions of Engineer in charg...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975-25 Sqmm, ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
2754 DTP Final KW3 Call-2.docx
Tender Document • 0.18 MB
Tender Notification - KW3 2754 Call-2.docx
Others - Tender Notification • 0.06 MB
Download all tender documents and submit your bid