REPAIR MAINT OF INTERNAL ELECTRIFICATION AND PETTY REPAIR AND MISC REPAIR WORK OF INTERNAL ELECTRIFICATION AT ENGR REGT HQ LSA FPD PNR COY MTF SATA STN HQ CAMP AND LIVING AREA138 OFFRS MESS AND ADJACENT AREA UNDER GE 865 EWS

Amount

Taking down carefully copper/Aluminium point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for re-use at site and making good disturbed surfaces of walls, floors etc as directed.

M&L for point wiring with copper conductor cable, multistranded, single core 1.5 Sqmm size for one light point controlled by one switch with PVC insulated multistranded copper conductor cable of size 1.5 sq mm for earth continuity in and including PVC casing and capping of approved size and quality fixed on walls/ceiling/wooden panelling including fixing 3 mm thick bakelite sheet on wooden board of any size complete all as directed and specified.

All as per Item No 2 but for one 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 Sqmm size complete all as specified and as directed.

All as per Item No 2 but for one 3 pin socket outlet, 5 Amps Independent with cables 1.5 Sqmm size complete all as specified and as directed.

All as per Item No 2 but for bell point with cables 1.5 Sqmm size complete all as specified and as directed.

All as per item No 2 above but for power point 3 pin switch socket 15 Amp with PVC copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board incl one run 1.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall incl teak wooden board with 3mm thick of hylam top sheet complete all as specified and as directed.

M&L for ceiling rose surface bakelite 65x50 mm two to three terminals.all as specified and directed by Engr-in-charge. Make : Anchor/Legrand/Crabtree/Cona

S&F switch piano flush type one way single pole 5 Amp 240 volts. Make : Anchor/Legrand/Crabtree/Cona

S&F switch socket combination 2 in 1, 5 Amps flush type universal. Make : Anchor/Legrand/Crabtree/Cona

S&F for socket outlet 2 in 1 3Pin, 5A, flush type complete all as specified and as directed. Make : Anchor/Legrand/Crabtree/Cona

S&F switch socket combination 2 in 1, 3 pin 5 and 15 Amps flush type universal. Make : Anchor/Legrand/Crabtree/Cona

S&F for Modular switch one way single pole 10 Amp 1 module 240 volts. Make : Anchor/Legrand/Crabtree/ABB

S&F for Modular switch one way single pole 16 Amp 1 module 240 volts. Make : Anchor/Legrand/Crabtree/ABB

S&F for Modular socket 6A -2/3 Pin combined 2 module 240 Volt, Make : Anchor/Legrand/Crabtree/ABB

S&F for Modular socket 6/16 A -2/3 Pin combined 2 module 240 Volt, Make : Anchor/Legrand/Crabtree/ABB

S&F in replacement of electrical bell push (multi music type), AC, 230 Volts complete all as specified and as directed. Make : Anchor/Legrand/Crabtree/ABB

S&F in replacement of electrical bell push flush type 5 Amp, complete all as specified and as directed. Make : Anchor/Legrand/Crabtree/ABB

S&F for modular white cover plate with frame 3 module. Make : Anchor Roma/Havells/L&T

S&F for modular white cover plate with frame 8 module. Make : Anchor Roma/Havells/L&T

S&F for modular white cover plate with frame 6 module. Make : Anchor Roma/Havells/L&T

S&F for modular white cover plate with frame 4 module. Make : Anchor Roma/Havells/L&T

M&L for lamp holder PVC/Poly cor bonate type insulated body with back plate suitable for batten fittings as specified and directed. Make : Anchor/Legrand/Crabtree/Cona

M&L in replacement for sub main wiring with 2 runs of FR PVC insulated multistrand, copper conductor cable of size 6 Sqmm along with one run of 6 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in and including PVC casing & capping. Make : Havells/L&T/Finolex/Anchor/Ploycab

M&L in replacement for sub main wiring with 2 runs of FR PVC insulated multistrand, copper conductor cable of size 4 Sqmm along with one run of 4 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in and including PVC casing & capping. Make : Havells/L&T/Finolex/Anchor/Ploycab

M&L in replacement for sub main wiring with 2 runs of FR PVC insulated multistrand, copper conductor cable of size 2.5 Sqmm along with one run of 2.5 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in and including PVC casing & capping. Make : Havells/L&T/Finolex/Anchor/Ploycab

Supply and fixing MCB SP 6 to 32 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4085 87 to 4085 95 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SP 40 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4085 96 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SP 63 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4085 98 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SPN 6 to 32 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 09 to 4086 17 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SPN 40 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 18 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SPN 63 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 20 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB TPN 63 Amps, 'C' series, 415 V A/C complete incl taking down old MCBs all as specified and as directed by Engr-in-Charge. Make: Cat part No 4086 83 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCCB 4 pole 100 Amps, 16 kA, 415 Volt complete incl taking down of old MCCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4200 15 of Legrand (DPX³) or equal approved in Schneider (NSX)/Siemens (3VL2)/L&T (D-Shine)

Supply and fixing MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 8 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down old DBs. Make: Cat part No 5076 11 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 12 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down old DBs. Make: Cat part No 5076 11 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 4 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down old DBs. Make: Cat part No 5076 11 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing MCB distribution board Double door, regal grey, sheet metal enclosure, TPN 240 volts 4 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down old DBs. Make: Cat part No 5076 11 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

M&L for PVC Gang box with switch socket combination 2 in 1, 3 pin 5 & 15 Amp flush type including taking down complete all as specified and directed.

M&L for PVC Gang box with switch socket combination 2 in 1, 3 pin 5 Amp flush type including taking down complete all as specified and directed.

S&F in replacement of heating elements suitable for water electric storage heater vertical type 220/240 V AC of capacity 1500W complete all as specified and directed by Engr in Charge .

S&F in replacement of heating elements suitable for water electric storage heater vertical type 220/240 V AC of capacity 2000W complete all as specified and directed by Engr in Charge .

Rewinding of burnt windings of Exhaust fans of size up to 450 mm size including dismantling from location and removing the burnt out winding , cleaning the stator with CTC solution to remove the burnt slots. Rewinding the same with new super enamelled copper wire same gauge and size /number of turns , varnishing the winding completely and reassembling completely. (Spare parts replaced will be measured &paid seperately)

Supply and fixing in replacement of following spares parts/ items of Exhaust fan of various type :-

Flexible twin twisted copper wire two core of size 23/0.0076mm

Ball bearing suitable for Exhaust fan up 450 mm sweep any make .

Condensor 2.5 MFD 230 V suitable for Exhaust fan of any sweep/size .

Condensor 4 MFD 230 V suitable for Exhaust fan of any sweep/size .

Gun metal Bushings suitable for Exhaust fan fan up to 450 mm sweep any make .

M&L replacement of louvers made out of metal sheets suitable for up to 450 mm sweep exhaust fans complete all as specified and as directed.

Fixing only in replacement of old U/S decorative durable LED batten fitting of any capacity , 4/2 feet long with decorative and caps, powder coated CRCA decorative for LED tube of any capacity, 4/2 feet long (white colour) tube having driver ,connector block etc complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core all as required at site or directed by Engr in Charge. Note: Material shall be issued under Sch "B" store free for fixing only.

Fixing only in replacement of old U/S LED Mirror light fitting of any capacity and type 230 volts box type , with standard specification etc complete withh all accessories pre wired twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr in Charge. Note: Mmaterial shall be issued under Sch "B" store free for fixing only.

Fixing only in replacement of LED Bulk head luminaire of any capacity 10/11 Watts with all accessories pre wired twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr in Charge. Note: Material shall be issued under Sch "B" store free for fixing only.

S&F LED Post top made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP 65 protection of capacity 40 watt LED white colour including suitable size of GI pipe for fixing of light on post and elecrical connection complete all as specified and directed by Engr in Charge.

S&F 1100 V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of pvc tape and over all pvc sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire one twin core cable flat of stranded multistrand conductor size 4.0 sqmm

S&F 1100 V gradeheavy duty cable PVC insulated aluminium conductor served with inner sheathing of pvc tape and over all pvc sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire one twin core cable flat of stranded multistrand conductor size 6.0 sqmm

S&F 1100 V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of pvc tape and over all pvc sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire one twin core cable flat of stranded multistrand conductor size10.0 sqmm

S&F in replacement of old unsv Single core copper conductor of size 1.5 Sqmm (FRLSH) all as specified and directed by Engr in Charge.

S&F in replacement of old unsv Single core copper conductor of size 2.5 Sqmm (FRLSH) all as specified and directed by Engr in Charge.

S&F in replacement of old unsv Single core copper conductor of size 4 Sqmm(FRLSH) all as specified and directed by Engr in Charge.

S&F in replacement of old unsv Single core copper conductor of size 6.0 Sqmm(FRLSH) all as specified and directed by Engr in Charge.

S&F in replacement of plug top 3 pin of capacity 5/6 Amp complete all as specified and directed by Engr in Charge.

S&F in replacement of plug top 3 pin of capacity 15/16 Amp complete all as specified and directed by Engr in Charge.

S&F in replacement of LED Driver unit ISI marked suitable for recessed mounting fitting of 24 Watts complete all as specified and directed.

S&F in replacement of LED Driver unit ISI marked suitable for recessed mounting fitting of 36 Watts complete all as specified and directed.

Supply and fix in replacement of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp 240 Volts complete all as specified and directed by Engr in Charge.

Material and labour for earthing complete with galvanised steel earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including GI wire of size 4 mm dia by means of nuts, bolts, washers etc made of and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore light grade GI watering pipe, lugs, 15mm bore light grade GI protection pipe, test point etc complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. Any additional length shall be adjusted through deviation order. (ii) Item includes the cost of 7.5 m GI earth lead. Any additional in length shall be adjusted through deviation order ( For Main DBs ) (iii) Item includes the cost of Charcoal and commercial salt ( For Main DBs )

Horizon Construction Company

R B TRADERS

M.S Sharma Enterprises

SUMEET TRADING CORPORATION

M/S BALI CONSTRUCTIONS

Takshos Enterprises

AKHTAR HUSSAIN