Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.7 LAccepted-AOC | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹50.4 L+₹51,605 (1.03%)Rejected-AOC OLD DAILY MARKET DIMAPUR 797 112 NAGALAND | PEREN | NAGALAND | 797112 | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹50.9 L+₹1.0 L (2.03%)Rejected-AOC | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹51.2 L+₹1.3 L (2.65%)Rejected-AOC HOUSE NO 59 THILIXU VILLAGE BLOCK V PS POST DIMAPUR NAGALAND 797 112 | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L4 | Rejected-AOC Higher bid value | |
| 5 | L5₹51.8 L+₹2.0 L (3.92%)Rejected-AOC | L5 | Rejected-AOC Higher bid value |
Tender Value
₹49.8 L
EMD Value
₹99,500
Closing Date
10 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
PERIODICAL SERVICES TO CERTAIN OTM ACCNS UNDER AGE BR II AT RMS SW ZONE AND DIMAPUR
2023_MES_597434_1
8530/C/E8
Open Tender
Civil Works
Item Rate
270 days
RANGAPAHAR
Class D, Category a(i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹99,500
20 Jun 2023
22 May 2023
12 Jun 2023
22 May 2023
10 Jun 2023
5 Jun 2023
22 May 2023 - 29 May 2023
Amount
M&L for preparation of old decorated surfaces of walls including cornices, pilasters etc (plastered or unplastered surfaces) and applying one coat of cement base paint including (i) Use of all scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. (ii) Removing of nails, making good holes, cracks etc. (iii) Work in patches and narrow widths, bands, cornices, plasteres etc and cutting in edges to line where necessary. (iv) Spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes. (v) Cleaning of bush, shrubs, vegetation, grass, weed, saplings etc. (vi) Washing/cleaning of floors, glass, joinery, electric fittings,wiring etc., of drops and splashes and leaving premise, clean and tidy etc. complete all as specified and as directed by Engr in Charge.
All as per item No. 1 here-in-before but two coats of cement base paint on old surfaces of walls including complete remocal of existing treatment.complete all as specified and as directed by Engr in Charge.
M& L for preparation and one coat of Weather proof exterior emulsion paint on brick /concrete surfaces/plasterd surfaces of wall including (i) Use of all scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. (ii) Removing of nails, making good holes, cracks etc. (iii) Work in patches and narrow widths, bands, cornices, plasteres etc and cutting in edges to line where necessary. (iv) Spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes. (v) Cleaning of bush, shrubs, vegetation, grass, weed, saplings etc. (vi) Washing floors, cleaning glass, joinery, electric fittings,wiring etc., of drops and splashes and leaving premise, clean and tidy etc. complete all as specified and as directed by Engr in Charge.
Complete removal of existing treatment on wall/roof projection including facia,cormices etc by scrapping with mechancial sander (having mechincal vaccum mechanism) with sanding pad of approprite grit to make surface clean,free from dust,loose paint etc by skilled labour complete all as specified and directed.
M&L for waterproof cement based putty@ 1Kg (undiluted) per sq mtr of average thickness 1mm over the plastered/old painted wall after scraping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having vacuum mechanism) having RPM not less than 1500,sanding pad of 240 Grit or above to make the surface free from dust etc.by skilled labour as per following steps: Step1) Mix the putty powder by adding water as per manufacture instruction and mix it with putty mixer the mixing capacity of min 2.5 Kg putty per minute. Step2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minuts with a maximum pressure 3300 PSI.Allow6-8 hrs time to dry the putty surface. Step (3(a) The work pertaining to periodical services&water proffing shall be executed from authrized application through manufacture of which the materials i.e. Paint,distemper,putty etc. is proposed to be used by the contractor and approved by Garrisin Engineer.(b) Cost of scafolding upto 10mm hight of bulding is including in this item.
M&L for one coat acrylic water based exterior grade [email protected] (undiluted)/10sq mtr diluted with fully automatic airless spray machine of paint applaction with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete as as specified as directed.(Note (a) The work pertaining to periodical services&water proffing shall be executed from authorized applicator through manufacture of which the materials i.e Paint,Distemper,Puuty etc. is proposed to be used by the contractor and approved by Garrision Engineer. (b) Cost of scafolding upto 10mm hight of bulding is enclosed in this item. (Make: Asian,BERGER AND DULEX)
M&L for two coat water based premum acrylic smooth exteriror emulsion of approved colour with silicon additive&colour stay Technology,Excellent Drit Pick up resistence with low VOC less than 50 gram/ltrs as per LEEDS specification.Anti algal properties in two [email protected] ltr (unditluted)/10 sqm diluted with water as per automatic airless spray machine of paint applaction with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete as as specified as directed.(Note (a) The work pertaining to periodical services&water proffing shall be executed from authorized applicator through manufacture of which the materials i.e Paint,Distemper,Puuty etc. is proposed to be used by the contractor and approved by Garrision Engineer. (b) Cost of scafolding upto 10mm hight of bulding is enclosed in this item (Make: Asian,BERGER AND DULEX)
M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and as directed.
M&L for Preparation of old decorated surfaces by washing ,rubbing down and stopping of distempered and painted surfaces and applying one coat of oil emulsion distemper on walls including (i) Use of all scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. (ii) Removing of nails, making good holes, cracks etc. (iii) Work in patches and narrow widths, bands, cornices, plasteres etc and cutting in edges to line where necessary. (iv) Spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes. (v) Removing and replacing furniture, moveable cupboard, chicks, blinds etc. (vi) Cleaning of bush, shrubs, vegetation, grass, weed, saplings etc. (vii) Washing floors, cleaning glass, joinery, electric fittings,wiring etc., of drops and splashes and leaving premise, clean and tidy etc. complete all as specified and as directed by Engr in Charge.
All as per item No 9 here-in-above but two coat of oil emulsion distemper complete all as specified and as directed by Engr in Charge.
M&L for complete removal of existing treatment of wall and applying two coats of distemper oil emulsion over a coat of 3mm thick wall care putty filling complete all as specified and directed.
M&L for Preparation of plasterded or un plastered old surfaces of walls and applying one coat of white wash including (i) Use of all scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. (ii) Removing of nails, making good holes, cracks etc. (iii) Work in patches and narrow widths, bands, cornices, plasteres etc and cutting in edges to line where necessary. (iv) Spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes. (v) Removing and replacing furniture, moveable cupboard, chicks, blinds etc. (vi) Cleaning of bush, shrubs, vegetation, grass, weed, saplings etc. (vii) Washing floors, cleaning glass, joinery, electric fittings,wiring etc., of drops and splashes and leaving premise, clean and tidy etc. complete all as specified and as directed by Engr in Charge.
M&L for Preparation of plasterded or un plastered old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for preparing old painted surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for writing letter of figures (block , Raman, italic or indian) n exc 30 Nos cm high with thick synthetic paint with out bursh marks, if necessary repainted until the desired result is obtained complete all as specified and directed
M&L for writing Stops, commas, short lines, dashes, hyphens, brackets, etc complete all as specified and directed
Taking down cement plaster any thickness any description on brick or stone walls, partitions, ceilings etc incl raking out joints hacking for key scrubbing down with water etc including cleaning of bush, shrubs, vegetation, grass,weed,saplings etc complete all as specified and directed
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement) etc complete all as specified and directed.
M&L for 15 mm thick rendering on fair faces of brick/concrete surfaces in CM (1:4) and finished even and smooth without using extra cement etc complete all as specified and directed.
M&L for rendering 5mm thick on fair surfaces or concrete surfaces in cement plaster 1:3 in ceilling and finished even and smooth (without using extra cement) etc complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceilling and applying three coat of white wash etc complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying three coats of white wash on walls all as specified & directed
M&L for preparation of new plastered or un plastered surface of walls including cornices, pilasters etc and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation of new plastered undecorated surfaces of walls and applying two coat of distemper oil emulsion over a coat of white wash all as specified.
Taking down chowkhat or frame with shutter without taking off shutters from the frame, size of shutter not exceeding 1.5 Sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each etc complete all as specified and directed.
Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed.
S&F factory made 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels complete all as specified and directed.
S&F factory made second class hardwood glazed and skeleton door shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats etc complete all as specified and directed.
Anodised aluminium powder coated ( minimum thickness of powder coationg 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S&F Anodised aluminium door shutter, aluminium section weighing 0.55 kg/m inluding necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.
S&F Anodised aluminium Window or ventilator shutter, fixed type without sash bar, aluminium section weighing 0.55 kg/m inluding necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.
S&F Expanded metal exc 4 kg, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanished steel staples supplied and fixed complete to wood or steel members etc complete all as specified and directed.
S&F Sheet glass ordinary quality 4.8 mm thick and glazing in aluminum door in squares exc 0.5 sqm each etc complete all as specified and directed.
S&F Sheet glass ordinary quality 4.00 mm thick and glazing in aluminum window in squares n exc 0.5 sqm each
M&L for fixing 2 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats all as specified and directed
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and directed.
S&F 4 levers brass mortices lock, vertical type, size 100mm etc complete all as specified and directed.
S&F Aluminium (Die cast) body , Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed etc complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm etc complete all as specified and directed.
Supply and fixing 100mm size stainless steel butt hinges,medium weight, hot rolled complete all as specified and as directed.
Supply and fixing 75mm size mild steel butt hinges, medium weight, cold rolled complete all as specified and as directed.
S & F Aluminium anodized, barrel tower bolts, 150mm long of extruded section complete all as specified and as directed.
Supply and fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
Supply and fixing 100mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
Supply and fixing galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.
Supply and fixing fillets, square, rectangular or triangular in section, clean sawn , secured with nails or beds, sectional area exc 13 sqm but not exc 25 sqm complete all as specified and as directed.
M/S MUNGA LAL PRASAD
Kalim sons
Shri Atoshe Tuccu
Rameshwar Prasad
VIHUTO YEPTHO
Shri H Kivigho Zhimo
M/S ARVIND GROUP OF CONSTRUCTION & INFRASTRUCTURE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .