Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.8 LAccepted-AOC 10 RAJAN KUNJ ROORKEE ROAD MEERUT 250001 | MEERUT | UTTAR PRADESH | 250001 | L1 | Accepted-AOC Lowest and reasonable | |
| 2 | L2₹32.0 L+₹5.3 L (20.0%)Rejected-Finance 34 KAISER GANJ MANDI DIST MEERUT UP 250002 | MEERUT | UTTAR PRADESH | 250002 | L2 | Rejected-Finance In order but L2 |
Tender Value
Refer Docs
EMD Value
₹77,500
Closing Date
29 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(U) E/M Meerut Cantt
Roorkee road Meerut Cantt
SPECIAL REPAIRS OF BLDG NO E-18 AND E-19 (MAIN OFFICE) OF GE (UTILITY) MEERUT.
2022_MES_533890_1
8449/E8
Open Tender
Civil Works
Works
180 days
Meerut
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
GE(U) E/M Meerut
₹77,500
Yes
9 Sept 2022
27 Jun 2022
1 Aug 2022
27 Jun 2022
29 Jul 2022
11 Jul 2022
90 days
Amount
Dismantling plain or corrugated asbestos cement (corrugated semi-corrugated etc) sheets in roof covering,complete all as specified.
Dismantling wall and ceiling boards ( fibre pulp insullation Etc) or insullation boards/ slabs blankets any thickness including cover fillets,complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises,complete all as specified.
Dismantling wrought iron or mild steel work of any desription not other wise provided ,complete all as specified.
Taking down Chowkats or frames not exc. 1.5 Sqm each, with shutters (without taking off shutters from the frame),complete all as specified and directed
Taking down Chowkats or frames exc. 1.5 Sqm and n,exc 4 Sqm each, with shutters (without taking off shutters from the frame),complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land,complete all as specified and directed.
Demolition of brickwork or stone work built in cement mortar including all quoins arches , pillers etc,complete all as specified.
Taking down cemet plaster including raking out joint hacking for key scribbing down with water,complete all as specified.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated profiled steel sheet 0.50 mm thick of an colour having tensiler strength of 5850 Mpa as in roof covering / clading to wall fixed self tapping screwes/ J or L type cranked hook bolts,complete all as specified.
Ditto as per above item but plain sheet ,complete all as specified.
S&F MS wind tie for roof including securing bolte etc ,complete all as specified.
M&L brick work with fly ash bricks ( old size) straight or curved in plan exc 6 m mean radius , built in CM 1:6 Comlete all as specified and directed
M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cm 1:6 ,complete all as specified.
M&L rendering 15 mm thick on fair faces of brick work or concrete surfacesk in cm 1:4,complete all as specified.
S& F pressed steel framessize 125X60mm for doors with one or more rebates including necessary fixinjg lugs hings lock strike plats complete as specified
S&F solid PVC door frame of size 50mm X 47 MM made out of 5 mm plain colour PVC sheet reinforced with M.S square tube in opening as per specification in drawing ,complete all as specified and directed.
M&L cement concrete type B0 1:2:4 ( 12.5mm graded crushed stone aggregate ) as filling in door frame,complete all as specified and directed.
S&F 35 mm thick glazed and skelton shutters open rebated and prepared to recevie gauze etc ( with out sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitered beads for secruing glass etc, sizes of members of shutters as specified in SSR Part I section 8 clause 8.24 ( a)
S&F factory made shutters 35 mm thick plain framed panelled shutter ( Two panel ) with lock rail and panel of 9 mm B.W.P commercial plt or 12 mm veneered particle board with commercila veneering on both faces ,. The size of rail and stile as per IS : 1003 ( part 1) kiln seasoned and chemically pressure treated ,complete all as specified and directed
S&F factory made solid panel PVC door shutter 30mm thick ( style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colourPVC sheets on top rail, lock rail & bottom rail, rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the syile & rails with suitable PVC sheet beading , and jointed together with solvent cement as per specification in drawing ,complete all as specified and directed
S&F 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy all as specified and directed.
S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and directed.
S&F aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size all as specified and directed.
S&F 100 butt hings heavy weight cold rolled mild steel ,complete all as specified and directed.
S&F 150 mm overall length of cover plate floor door stopper of aluminium alloy body and tougue with hard drawn steel spring ,complete all as specified and directed.
S&F aluminium glazed window shutters, Three track (each shutter approx. half the size of opening with two Nos. glazed shutter and 1 No. wire gauged shutter including necessary jointing cleats for fixing etc, glazing clips, rubber packing, aluminium anodised snap beading, screws, aluminium (anodised) fittings such as handle clips (suitable size), locking device, and glazing in panels with 5.0mm thick coloured/tinted glass and gauged with 0.36mm dia, 1.40mm aperture SS wire mesh of sing Jindal Aluminium Section Id 491, 4309, 4310, 8853, 8851, 9205 complete all as specified and shown in drg and as directed by Engineer-in-Charge. (In case of non-availability of any particular section, the highter section in terms of Kg/rm shall be provided without any extra cost to govt ,complete all as specified and directed.(Note:-size of alluminium profile / section 100.60x44.45x1.60mm for frame/chowkat)
Supply only aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm ,complete all as specified and directed.
S&F aluminium fully glazed door with shutter and frame with one or more rebates made out of JINDAL anodised aluminium sections, shutters fixed with floor spring hinge (ISI marked) including jointing cleats for fixing etc complete all as specified with panel of 6 mm thick tinted glass (tint of glass as approved by GE), clips, rubber packing, anodised aluminium snap beading, screws and aluminium fittings all as shown as drg No. CEAA/TD/132 sheet 1/2 and 2.2 except fixed glazing (FG) all as specified and directed. (Note:-size of alluminium profile/section 100.60x44.45x1.60mm for frame/chowkat)
S&F anonised aluminium snap grid size 605X605 mm frame work for false ceiling including 6 mm dia GI hanger up to 2.0 m hight ,complete all as specified and directed.
M&L perforated particle board/ tiles for insulation and accoustic purpose 60X60 cm in size fixed with on frame work or with staple on snap grid as in ceiling flat or sloping all as specified and directed.
ditto as per above item 31 above but except perforated board/tiles in repair ,complete all as specified.
M&L 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded crushed stone aggregate in sub base of floors etc,complete all as specified and directed.
M&L vitrified ceramic dark shade 10 mm thick files (sqaure/rectangular) area of each tiles n.exc. 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match existing tiles and including 15 mm thick screed bed or bedding layer of mortar 1:6 for laying floor finishes complete all as specified and directed.
Ditto as per above item 34 but on vertical surfaces over and including 10 mm thick backing coat in cm 1 : 4,complete all as specified.
M&L non skid ceramic tiles dark colour 7 to 8 mm thick ( square/rectangular ) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and over and including 15 thick screed bed in cm 1:6 ,complete all as specified and directed.
M&L glazed digital ceramic coloured tiles Ist quality in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm plastering in CM 1:4 all as specified and directed.
Taking down of existing unserviceable wall lining including frame and S&F PVC wall lining con-sisting of 5 mm thick teak face PVC sheet inclusive of solvent cement and fixing at site complate as specification and drawing .
S&F in repairs for bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore,complete all as specified and directed.
S&Fin repairs stop valve 15 mm dia cast chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed,complete all as specified and directed.
S&F in repair 20mm dia fency type Harrison rails, stainless steel chromium including plated with fixing brackets, stops, rollers etc ,complete all as specified and directed
S&F in repair PVC connection 450mm long with check nut for wash hand basin etc complete ,complete all as specified and directed
S&F in repairs vitreous china wash basin, angle back, size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets ,complete all as specified and directed.
S&F in repairs vitreous China urinals half stall urinal (back or corner wall type), complete inlcuding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including urinal spreader of PTMT any colour for fixing with 15mm dia pipe, PVC connection 15mm x 600mm long, waste coupling of PTMT (Half or full threaded) 40mm dia ,complete all as specified and directed.
S&F in repairs for pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe & fixed ,complete all as specified and directed.
S&F waste pipe of 32mm dia PVC pipe for WHB with long screwed shanks and fly nut flange end beddedd in red lead cement and other end fixed ,complete all as specified and directed
S&F in repairs soap dish any type fixed to plugs with chromium plated brass screws ,complete all as specified and directed.
S&F in repairs Aluminium anodised tubular towel rail 20mm dia D Type 60cm long between flanges ,complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding, flushing cistern and flush pipe) including seat cover with hinhes device complete connected to p trap ,complete all as specified and directed.
S&F in repairs jet spray to EWC with PVC nozzle, PVC fish plates and PVC fish plates and PVCflexible pipe etc complite ,complete all as specified and directed.
S&F in repairs for grating square 150mmx150mm size of PTMT ,complete all as specified and directed.
S&F in repairs PVC low level valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, flaot and handle including brackets of 10 Ltr capacity ,complete all as specified and directed.
Taking up or down 15 mm dia steel tubing and connection incl cleaning for refixing of the following bore of pipe,complete all as specified and directed.
Taking up or down 20 mm dia steel tubing and connection incl cleaning for refixing of the following bore of pipe,complete all as specified and directed.
S&F 15 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors ,complete all as specified.
Ditto all as item No 56 above but 20 mm dia of bore pipe ,complete all as specified.
Dismantling of 100/110 cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches/wall/roof all as directed by Engr-in-charge following bore of pipe
Dismantling of 75mm cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches,wall/ roof all as directed by Engr-in-charge.
S&F 110mm dia UPVC ultra drain, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors ,complete all as specified and directed.
S&F 75mm dia UPVC ultra drain, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors complete all as specified and directed.
M&L preparation of new plastered surfaces of walls and distempering with distemper oil emulsion , two coats, white or tinted with roller over a coat of 1 mm thick wall care putty alkaline resistant primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
M&L preparing new plastered of wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior weather proof paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over a coatof wall care putting 1 mm thick complete all as specified.
Complete removal of existing treatment on old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots Washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of putty and Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior weather proof paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified.
M&L preparation of surfaces of any description n,exc 10 cm girth including holdfasts distance pieces etc with two coat synthetic enamal paint over a coat of red oxide on new steel surfaces ,complete all as specified and directed.
M&L preparation wooden of surfaces of any description , not otherwise described over 10 cm width or girth two coat of synthetic enamel paint over one coat of pink primer ,complete all as specified and directed.
M&L preparaing the new surfaces and applying two coat of distemper oil emulsion over a coat of primer including and over 3 mm thick putty on wall ,complete all as specified and directed.
Complete removal of existing treatment on old treated surfaces and applying two coat of distemper over a coat of primer coat of including 3mm thick putty on wall all as specified and directed
M&L cement concrete 75 mm thick type C2 1:3:6 ( 40 mm graged crushed stone aggregate as in plinth protection ) all as specified and directed
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items will be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. to match with the adjoining surafces complete all as specified .
Taking Down unserviceable T/L fitting, panel light, garden light, security light, post top lantern, bulk head fitting any wattage any type complete all as directed.
M & L Point wiring complete with 1.5 Sqmm single core unsheathed PVC insulated 1100 V, FRLS grade with multistranded copper conductor ISI marked drawn through and including PVC casing & caping fixed on surface wall/ceiling and including pressed steel terminal box, grouted in wall and the 3mm thick terminated sheet top cover for mounting of switches, sockets regulators etc including 1.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor and connecting to earth dolly for light, fan, plug and bell all as directed and specified by Engr-in-charge.
One light /fan /bell point controlled by one 5 Amps one way switch.
One 3 Pin 6 Amps socket point on the independent board.
One 3 pin 6 Amp socket point on the same board with other switch.
All as per above item No-72 above but with 4 Sqmm cable for 15 Amp switch socket out let point on independent board including 4 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earthing continuity conductor all as directed and specified by Engr-in-charge.
M&L point wiring with FRLS PVC insulated sheathed copper conducter of size 1.5 Sqmm (nominal area) with multistranded copper conductor drawn through in PVC conduit including concealing conduit in wall/floors etc. medium grade of suitable size with all fittings and accessories including cutting chases in wall for fixing rigid PVC conduit and MS galvanised shunk type box covered with laminated PVC sheet fixed with brass screw of suitable size for housing/mounting of switches/sockets including 1.5 Sqmm FR PVC insulated sheathed multistandard copper conductor for one light/fan contineous earth wire connected to common earth dolly for one light/fan point control by one switch and making good the distributed surfacess completely matched and finished with existing surfacess including painting of walls etc. all as specified and as directed by Engr-in-Charge.
One light /fan / bell point controlled by one 6 Amps one way switch
One 3 pin socket out let 6 Amp point on independent board
One 3 Pin socket out let 6 Amp point on the same board with other switch.
All as per above item No-74 above but with 4 Sqmm cable for 16 Amps switch sockets out let point on independent board including 4 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earthing continuity conductor.
S&F polycarbonate Switch piano flush type,SP, 6 Amps, one way complete all as specified.
S&F polycarbonate bell push flush type,SP, 6 Amps, one way ( ISI) marked complete all as specified.
S&F Polycarbonate Switch piano flush type , single pole, 16 Amp, one way (ISI) marked complete all as specified.
S&F socket out let 3 pin , 6 Amps (2 in 1 Multi purpose) flush type controlled by one switch ISI marked make complete all as specified.
S&F socket out let 2 in 1, 3 pin, 6 & 16 Amps flush type controlled by one switch ISI marked complete all as specified.
S& F electronic ceiling fan regulator, rotary 0 to 04 steps, hum free, 100 watt complete all as specified and directed socket type complete all as specified.
S&F Lamp holder, polycarbonate type (Angular/Straight) complete all as specified and directed.
Supply & fix Modular switch 1 way 6A, 1 module ,complete all as specified and directed.
Supply & fix Modular switch 1 way 16A, 1 module ,complete all as specified and directed.
Supply & fix Fan step regulator, 120W - 2 module,complete all as specified and directed.
Supply & fix Socket, 6A - 2/3 pin combined 2 module,complete all as specified and directed.
Supply & fix Socket 6A/16A - 6 pin combined 2 module,complete all as specified and directed.
S&F modular metal flush box 4 module for mounting of modular type switches/sockets all as directed.
S&F modular metal flush box 6 module for mounting modular type switches/sockets all as directed.
S&F modular metal flush box 8 module for modular type switches/sockets all as directed.
supply and fix modular white cover plate with frame but 4 module,complete all as specified and directed.
supply and fix modular white cover plate with frame but 6 module,complete all as specified and directed.
supply and fix modular white cover plate with frame but 8 module,complete all as specified and directed.
S&F polycarbonate insulated body ceiling rose 6A, 65x50mm with three terminals, ISI maked fixed complete all as specified.
M&L Rigid non-metallic PVC conduit 25mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.
S&F 20watts Light emitting Diode (LED) tube light fitting wall mounting , indoor decorative aluminium extruded T5 LED battens, Integrated type, AC 230-240V, 50 hz, with PMMA/PC diffuser, 4' long, easy to install Efficacy : 125 lumen/watt, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.
S&F in repair Light emitting Diode (LED) panel recess mounting 2'x2'- 36 watts, 6000K, diffuser type optics, light fitting with separate electronic driver complete including cutting holes of required size in false ceiling and making good disturbed surfaces complete all as specified.
Supply & fix LED 40 watt decorative post top lantern made in die cast aluminium housing with decorative clear opal acrylic diffuser and IP 65 protection, resistance to impact and corrosion, glare free and better uniformity includes necessary PCC foundation and nuts/bols for fixing of light fitting etc. all as directed and specified.
Supply & fix LED 10 watt decorative garden light inverted pyramid tripod type LED bollard with soft 360 degree light distribution, IP 65 protection, resistance to impact and corrosion, glare free and better uniformity includes necessary PCC foundation and nuts/bolts for fixing of light fitting etc. all as directed and specified.
Supply & fixing MCB , SP, AC, 240 volts of 05 to 32 Amps capacity 10KA, 'c' series and making connections with suitable size of copper lugs complete all as specified & directed.
Supply & fixing MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'c' series and making connections with suitable size of copper lugs complete all as specified & directed.
Supply & fixing MCB, SPN, AC, 240 volts of 63 Amps capacity 10KA, 'c' series and making connections with suitable size of copper lugs complete all as specified & directed
Supply & fixing MCB DB Box 8 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity.
Supply & fixing MCB DB Box 12 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity.
Supply & fixing Sheet Metal Enclosures vertical TPN distribution board with provision for & including 100 Amp MCCB TPN as incomer with necessary internal wiring, MCBs as outgoing , 4 way, 415 Volt, Double door for housing MCB's/Isolators and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity ,complete all as specified and directed.
Taking down existing unserviceable submain wiring with PVC conduit and fittings and S&F submain wiring comprising two single core 4 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including PVC conduit and conduit fittings, medium grade not less 25mm dia with 4 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. ( Note :- (a) Extra length of cables/ wire required for connection to MCB shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly) (b) One metre of conduit alongwith 2x4 sqmm wire and 1x4 sqmm earth wire shall be measured as one unit length)
Taking down existing unserviceable submain wiring with PVC conduit and fittings and S&F submain wiring comprising two single core 6 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including PVC conduit and conduit fittings , medium grade not less 25mm dia with 6 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. ( Note :- (a) Extra length of cables/ wire required for connection to MCB shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly) (b) One metre of conduit alongwith 2x6 sqmm wire and 1x6 sqmm earth wire shall be measured as one unit length)
S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 4 core including taking out old cable necessary excavation and making good after laying etc, all as directed by Engineer-in-Charge
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes, laying of pipe and cables etc. but not exceeding 10 sqm on plan including dressing/trimming sides and levelling/grading & ramming bottom of excavation and getting out in soft/loose soil complete all as specified.
Returning ,filling in , including spreading , levelling , watering and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified.
Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.
M&L fly ash old size bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified.
Material and labour for river sand, unwashed and screened dry ) for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . (Note:Punned thickness shall be measured for the purpose of payment)
Supply & Fix ceiling fan down rod of MS pipe 15mm bore of length as per site measurement including cutting/threading making tide for fixing providing check nuts wachers etc complete.
m/s gupta construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .