GE(W)HSR-09/20-21 PETTY REPAIR AND DAY TO DAY MAINTENANCE OF EXTERNAL WATER SUPPLY AT HISAR MIL STN UNDER GE (WEST) HISAR

Amount

Attending complaints of no water / leakage of water by removing float valve , water meter, stop cock etc or GI/composite tubing of size 15 mm to 20 mm bore upto 0.3 mtr length including all GI fittings like elbow, socket, Tee, Nipple, bend, union etc and making new threads as required at site including excavation,return refilling and removing soil & earth work etc. complete all as specified and directed.

All as per item no 1 but of size 25 mm bore

All as per item no 1 but of size 40 mm bore

All as per item no 1 but of size 50 mm bore

All as per item no 1 but of size 80 mm bore

All as per item no 1 but of size 100 mm bore

Attending leakage complaints of sluice valve 80 mm to 150 mm bore by opening /removing gland plate and taking out water from water pit , providing gland packings and refitting including replacing worn out bolts,nuts,washers as required complete all as specified and directed.

Attending leakage complaints of sluice valve 200 mm to 250 mm bore by opening /removing gland plate and taking out water from water pit , providing gland packings and refitting including replacing worn out bolts,nuts,washers as required complete all as specified and directed.

Attending leakage complaints of sluice valve 300 mm to 400 mm bore by opening /removing gland plate and taking out water from water pit , providing gland packings and refitting including replacing worn out bolts,nuts,washers as required complete all as specified and directed.

Attending leakage complaints of CI pipe lines 80 to 100 mm bore using lead wool and rope and cocking of joints in situ complete all as specified and directed.

All as per item No 10 but size of CI pipe lines 150 to 200 mm mm bore.

All as per item No 10 but size of CI pipe lines 250 to 400 mm bore. NOTE for Ser item No (10 to 12) : (i) Dewatering of accumulated water using engine driven pump set etc is deemed to be included in quoted rate. (ii) Excavation and earth work required shall be measured and paid seperately. (iii) Complaints of urgent nature will be attended round the clock including Sunday & holiday to restore the water supply (iv) Minimum one pipe fitters and two helpers should be made available during all week days. (v) Complaints given to contractor shall be rectified within 24 hrs (vi) Contractor will arrange all the T&P/Diesel pumps for dewatering where ever required. (vii) A penality of Rs 500/- per complaint will be charged for not attending the complaints within 48 hours

Taking up or down steel tubing and connections 15 mm bore including cleaing for relaying / re-fixing or removal from site complete all as specified and directed.

All as per item no 13 but of size 20 mm bore

All as per item no 13 but of size 25 mm bore

All as per item no 13 but of size 40 mm bore

All as per item no 13 but of size 50 mm bore

All as per item no 13 but of size 80 mm bore

All as per item no 13 but of size 100 mm bore

Supply and fixing Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, Tee, Socket, Union, flange and Socket laid in trenches/ on walls complete all as specified and directed.

All as per item no 20 but of size 20 mm bore

All as per item no 20 but of size 25 mm bore

All as per item no 20 but of size 40 mm bore

All as per item no 20 but of size 50 mm bore

All as per item no 20 but of size 80 mm bore

All as per item no 20 but of size 100 mm bore

Laying only Steel water tubes, any grade, galvanised, 15 mm bore with all new fittings, laid in trenches/on walls complete all as specified and directed.

All as per item no 27 but of size 20 mm bore

All as per item no 27 but of size 25 mm bore

All as per item no 27 but of size 40 mm bore

All as per item no 27 but of size 50 mm bore

All as per item no 27 but of size 80 mm bore

All as per item no 27 but of size 100 mm bore

Taking up cast iron water mains (including all fittings) 80mm bore, with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

All as per item no 34 but of size 100 mm bore

All as per item no 34 but of size 150 mm bore

All as per item no 34 but of size 200 mm bore

All as per item no 34 but of size 250 mm bore

All as per item no 34 but of size 300 mm bore

All as per item no 34 but of size 400 mm bore

Supply and fixing Cast iron pipes 80mm bore with spigot and socket ends, centrifugally cast, class LA, in any length, laid in trenches complete all as specified and directed.

All as per item no 41 but of size 100 mm bore

All as per item no 41 but of size 150 mm bore

All as per item no 41 but of size 200 mm bore

All as per item no 41 but of size 250 mm bore

All as per item no 41 but of size 300 mm bore

All as per item no 41 but of size 400 mm bore

Laying only in trenches old cast iron pipes with spigot and socket ends centrifugally cast in any length, 80mm bore complete all as specified and directed.

All as per item no 48 but of size 100 mm bore

All as per item no 48 but of size 150 mm bore

All as per item no 48 but of size 200 mm bore

All as per item no 48 but of size 250 mm bore

All as per item no 48 but of size 300 mm bore

All as per item no 48 but of size 400 mm bore

Cutting of 80 mm bore existing CI Pipe for taking up of damaged / leakage portion or for insertion of branch T etc complete all as specified and directed. (Both cut shall be measured as one Job)

All as per item no 55 but of size 100 mm bore

All as per item no 55 but of size 150 mm bore

All as per item no 55 but of size 200 mm bore

All as per item no 55 but of size 250 mm bore

All as per item no 55 but of size 300 mm bore

M&L for Cast iron fittings viz bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), tee pieces, single branch, ‘Y’ junction, double branch, cross (all sockets or socket & spigot) collars, caps and plugs for spigot socketed pipes upto 150mm bore complete all as specified and directed.

M&L for Cast iron fittings viz bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), tee pieces, single branch, ‘Y’ junction, double branch, cross (all sockets or socket & spigot) collars, caps and plugs for spigot socketed pipes 200 mm to 400mm bore complete all as specified and directed.

Burning out lead joint in position for 80 mm bore pipes and fittings complete all as specified and directed. Note for Ser item No 63 to 68 :- New lead joint will be paid separately under relevant item here-in-after.

All as per item no 63 but of size 100 mm bore

All as per item no 63 but of size 150 mm bore

All as per item no 63 but of size 200 mm bore

All as per item no 63 but of size 250 mm bore

All as per item no 63 but of size 300 mm bore

M & L for Run lead joint for cast iron spigot and socket pipes and fitting of 80mm bore complete all as specified and directed.

All as per item no 69 but of size 100 mm bore

All as per item no 69 but of size 150 mm bore

All as per item no 69 but of size 200 mm bore

All as per item no 69 but of size 250 mm bore

All as per item no 69 but of size 300 mm bore

Supply and fix (in repair) Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 15 mm bore fixed in repair/replacement complete all as specified and directed.

All as per item no 75 but of size 20 mm bore

All as per item no 75 but of size 25 mm bore

All as per item no 75 but of size 40 mm bore

All as per item no 75 but of size 50 mm bore

Repair to non return valve 80mm bore by opening nuts, bolts and washer and replacing flap/gasket with new flap/gasket, refixing the nuts, bolts and washer etc complete all as specified and directed.(Nuts, bolts and washers if required shall be measured and paid separately as supply only).

All as per item No 80 but 100 mm bore complete.

All as per item No 80 but 150 mm bore complete.

Supply only flange, nuts, bolts,washers (machine made) of any size suitable for sluice valve/non return valve/CI/GI flanged pipe off sizes as required at site complete all as specified and directed.

M&L for flanged joint with rubber or fibre board gasket of CI pipe, sluice valve, non return valve etc of 80mm bore fixed in repair/replacement complete. ( Flange and nut,bolts and wsaher will be measured and paid seperately)

All as per item No 84 but of 100mm bore complete.

All as per item No 84 but of 150mm bore complete.

All as per item No 84 but of 200mm bore complete.

All as per item No 84 but of 250mm bore complete.

All as per item No 84 but of 300mm bore complete.

Supply and fixing Sluice valves class P N 1.6 cast iron body with forged steel spindle, non rising type, with cast iron wheel head, both end flanged, ISI marked, 300 mm bore including neoprene rubber gasket, nuts, bolts, washers, etc fixed in repairs/replacement complete all as specified and directed.

All as per Ser item No 90 here-in-beofe but 250 bore complete.

All as per Ser item No 90 here-in-beofe but 200 bore complete.

All as per Ser item No 90 here-in-beofe but 150 bore complete.

All as per Ser item No 90 here-in-beofe but 100 bore complete.

All as per Ser item No 90 here-in-beofe but 80 bore complete all as specified and directed.

S&F Non-return valves cast iron body, ISI marked, heavy duty both ends flanged suitable for 80 mm bore pipe fixed in repairs/replacement complete all as specified and directed.

All as per item No. 96 here-in-before but of size 100 mm complete

All as per item No. 96 here-in-before but of size 150 mm complete

MS spindle with check nut of sluice valve 80 mm bore as per existing pattern, fixed in repairs/replacement including nuts, bolts & washers complete all as specified and directed.

All as per item No 99 but for sluice valve 100 mm bore

All as per item No 99 but for sluice valve 150 mm bore

All as per item No 99 but for sluice valve 200mm bore

All as per item No 99 but for sluice valve 250mm bore

All as per item No 99 but for sluice valve 300mm bore

Excavating in trenches for laying / taking out pipes not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5mtr in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50mt and depositing where directed at a level not exceeding 1.5mt above the starting point complete all as specified and directed.

S&F in replacement of sluice valve operating rod ( inside clear water tank/filtration plant etc). made of GI pipe heavy duty 20 mm bore, 4 mtr long duly fixed on sluice valve at one end with nut, bolts etc, with wheel at other end complete all as specified and directed.

S&F MS clamp of any size including drilling holes complete all as specified and directed.

Bacteriological & chemical testing of raw and clean water from the authorised laboratory of state Govt complete with collecting sample in sterlized bottle to laboratory including testing report complete all as specified and directed by Engr-in-charge.

S & F CI/MS Detachable Joint suitable for 10mm bore Cast iron and DI pipe with metallic ring ,rubber gasket, nuts, bolts and washer etc of following size complete all as specified and directed.

All as per item no 111 but of size 150 mm bore

All as per item no 111 but of size 200 mm bore

All as per item no 111 but of size 250 mm bore

All as per item no 113 but of size 300 mm bore

M&L for Painting on pipes of any size after preparation on old painted surfaces of pipes and applying one coat of synthetic enamel paint all as specified and directed.

M&L for Painting on pipes of any size after preparation on new surfaces of pipes and one coat of Aluminium red oxide and one coat of synthetic enamel paint complete all as specified and directed.

Dismantling/Demolition of brickwork or stone/boulder masonry,built in lime mortar including all quoins,arches,pillars,etc., but excluding ashlar facings,dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with subclass'B' bricks, straight or curved on plan exc 6m mean radius,built in cement morter 1:4 complete all as specified and directed.

M&L for providing cement concrete type 'B1' 1:2:4(20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5 m clear span,cills,steps,seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height , coppings,kneelers,apex stones, bed plates, kerbs not provided for in item 04028 , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 using water proofing compound finished even and fair without using extra cement complete all as specified and directed.

S&F in replacement Aluminium conductor steel reinforced (ACSR) of any size for LT OH lines on poles including stringing,binding with aluminium wire incl jumpers complete connecting disconnected cable,service cable and street light connection complete all as specified and directed.

M&L in replacement of cross Arms bracings supports,clamp,eye hook and back plates fabricated from structural steel sections includings pole clamps ,D calmps,nuts,bolts,washers,welding ,bending cold or hot drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paint complete all as specifiand directed.

m/s Rajesh Kumar

virendra constructions

M/s INDER CONSTRUCTION COMPANY

P.K. ENTERPRISES