PROVN OF IRON SHED, WASH BASIN, BRICK WORK TO OPEN AREA, DOORS AND WINDOWS OF 55 X OR MD ACCN IN WELL AREA UNDER GE (WEST) PATHANKOT

Amount

M&L for Brick work using fly ash, old size bricks straight or curved on Plan exc 6m mean radius built in CM 1:6 complete all as specified and directed

Taking down cement plaster on brick or concrete or stone walls etc including racking out joints hacking for key scrubbing down with water any description complete all as specified and directed

Material & labour for 15mm thick rendering in CM 1:6 on fair fair faces of brick wall or concrete surfaces finished even and fair complete all as specified and directed

Materials & labour for prepration of newely plastered surface and finishing the surfaces of wall with wall one coat putty and applying two coat of Oil Bound distemper complete all as specified & directed.

Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified & directed.

M&L for rendering 15mm thick in CM 1:6 on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for Preparing newly plaster surfaces & applying two coats of cement base paint over one Coat of Cement Primer of any colour complete all as specified & directed.

Materials & labour for complete removal of existing treatmemt and finishing the surfaces of wall with Birla/J K wall putty and applying two coat of Oil Bound distemper complete all as specified & directed.

M&L for Complete removal of existing treatment & applying two coats cement base paint over one Coat of Cement Primer of any colour complete all as specified & directed.

M&L for Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash without any brush marks on the surface including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed.

Material and labour for complete removal of existing treatment from ceiling surface and applying two coat of white wash on undecorated surfaces without any brush marks on the surface including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed.

Material and labour for RCC type B-1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like such as cover slab of septic tank/soak well etc complete all as specified and as directed. (Note:- Reinforcement shall be measured and paid separately).

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and as directed

Material and labour for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.

S&F steel window/Ventilator factory made out of box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills, glazing (glass 3.0mm thick ordinary quality), guaging (stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.18mm ) and two coat synthetic enamel paint over a coat of red oxide primer all as per drg No CEPZ/ C- TD/032/13 Sheet 1/2 including taking old windows all as specified and directed by Engr-in-Charge.

S & F pressed steel frames 125 x 60 x1.25 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate complete all as spd and directed

M & L for cement concrete type C-0, 1:3:6 using 12.5 mm graded crushed stone aggregate as in back filling of hollow portion of frame with plain cement concrete and for fixing of hold fast complete all as specified and directed.

S&F factory made solid PVC printed moulded door shuter 28 to 30mm thick (stile) with 2,4,or,6 raised panel design with 2mm thick moulded pvc sheet on front side face and 2mm plain colour pvc sheet on back face S&F in frame at site as per specification & drawing and all as directed.

Factory made fully glazed/wire gauge single piece front side PVC printed door shutter 35 mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain cover pvc "c" channel having a pvc sheet strip of 20 mm width stuck inside with solvent cement for stiles & pvc laminated sheet for top rail,lock rail & bottom rail on either side and gap insert for top rail and bottom rail; panching of prelamnited sheet to be fitted in the mild steel framed welded/sealded to stiles & rails fixed with PVC sheet beading and jointed together with solvent cements. supplying and fixing in frame as per drg No-CEPZ/TD-378/11 SHEET 1/1, complete all as specified and directed by Eng-in-charge.

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thick ( above or below GL) complete all as specified and directed.

M&L for 25mm thick Cement concrete in sub base for receiving floor tiles and mass concrete 1:2:4,Type B-1, (using 20 mm graded crushed stone aggregate) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed .

Supply and fixing non skid coloured Ceramic tiles 07 to 08mm thick (square/ rectangular) polished, area of each tiles 400 x 400x 8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.

Material & labour for glazed coloured ceramic tiles with of size 450x300x7-8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 complete all as specified & directed. Note:-The texture, colour, Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE.

M&L for non abrasive paving (endura) tiles 300mm x 300mm x8-10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15mm screed bed CM 1:4 to match complete al as specified and directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.

Supplied and fixing sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 160mm complete all as specified and directed.

M&L for Stainless steel plate rack (Utensil Rack) of size (900mm x 750mmx250mm ) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with brass screw of required size including necessary fittings/nuts, bolts & washers complete all as specified and as directed.

20 mm thick granite (pure black) work (table rubbed and polished) cills, cooking platforms, in steps, jambs, pillars, window-cill and like in cement mortar (1:4) 10mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. Note : All Open Edges to be Half rounded.

S&F of 15mm dia Gun -metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply & fixing 15mm Fancy type bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed.

Supply & fixing vitreous china counter sunk wash hand basin, white of size 22 x 16 x 8 Inchs (excluding taps, waste chain and plug and porcelain stopper) suitable for 15mm dia pipe complete all as specified & directed.

Supply & fixing angular valve, 15 mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.

Supply and fixing stop valves (ISI marked), 15mm dia, cast copper alloy, chromium plated fancy type with long shank and cup (concealed type) screwd down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply & fixing rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) three layered, hoisted and fixed in position with all fittings complete all as specified & directed.

Supply & fixing PVC low level flushing cistern of 10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

Cutting chase, pining in making good to facings where required and pointing in cement mortar (1:3) to ends, cutting chases for concealed water tubing ror concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified & directed.

Supply & fixing 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed

S&F of 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed

Supply & fixing of PVC connections 450mm long, 15mm dia for iron pipe including PTMT nuts complete all as specified & directed.

Supply & fixing of PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed.

Supply & fixing pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F corner glass shelf with bracket fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified & directed.

S&F o PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified & directed.

S&F of PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.

PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore complete all as specified & directed.

S & F PVC SWR Bends any radious 110mm complete all as specified & directed.

S&F Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified & directed.

Supply & fixing grating doom 100 mm dia of PTMT complete all as specified & directed.

M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S & F structural steel angles/rectangular hollow section/steel tubular roof trusses (framed), purlines and fastening including distance pieces etc. using ERW or induction welding complete all as specified and directed.

M&L for Removing of iron gate in back side and increasing height as per requirement of site with including hinges and including one coat of painting complete all as specified & as directed by Engr-in-charge.

Material and labour for cutting down plants / trees of girth not exc 15 cm & surface are not exc 0.36 Sqm each from roof tops /sides of external walls of buildings, chajja, wall junctions, junctions of of rain water / soil /waste vent pipes including taking out roots entered in wall/slab surfaces and making good the surfaces including repairing the CI/GI/PVC joints of affected locations by applying TUFALO (herbal medicine )and making good to suit the adjoining surfaces using PCC type 1:2:4, type B-O or cement mortar 1:2 complete all as per manufacturer instructions and as specified. NOTE: Any CI/GI/PVC pipes and fittings damaged during work shall be replaced by new one to insure leakage / seepage free joint without any extra cost to the department and Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc ,hoisting, lowering and protective measures etc up to four storeys height of bldgs and removing of debris out of MoD land complete all as specified and as directed.

Notes :- (a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit. (NIL). (b) PERFORMANCE SECURITY :- (Refer condition 19 of IAFW-2249) The performance security for an amount equivalent to 3% (Three percent) of the accepted contract sum shall be delivered by the successful bidder immediately after the date of intimation letter of acceptance and all provisions shall be applicable as per condition 19 of IAFW 2249

Abrol construction co

Om Sai Ram Builders

M/S ANSHUL ENTERPRISES

M/S RUDRA CONSTRUCTION CO

M/S SHRI RAM BUILDERS