Interior Renovation work of existing office space at KVS, HQ

Name of work: Interior/Renovation works for existing office space at KVS HQ, New Delhi

Sr. No. Item Description Total Amount(Rs.)

Sr. No. Item Description Total Amount(Rs.)

1 Part 1: Construction of deck slab and allied civil works 49,46,219.03

Part 2: Interior/Renovation of existing office at 3rd floor

level and allied works

Part 3:Interior/Renovation works at 4th floor level and allied

Part 4: Electrical and allied works of office space at 3rd and

4th floor level.

Total Amount including GST 1,99,00,501.17

Total Amount including GST 1,99,00,501.17

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 1: Construction of deck slab and allied civil works

Description Unit DSR/MR ref DSR Rate (Rs.) MR Rate (Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

1 DEMOLITION WORK

Demolishing cement concrete manually / by mechanical means including disposal of

1.01 material within 50 m lead as per direction of Engineer-in-charge (nominal concrete 1:4:8 or Cum 15.2.2 1,503.60 42.24 63,512.06 -

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste

material by mechanical transport including loading, transporting, unloading to approved

municipal dumping ground for lead upto 10 km for all lifts, complete

as per directions of Engineer-in-charge.

Reinforced cement concrete work in beams, suspended floors, roofs

having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands,

plain window sills, staircases and spiral stair cases above plinth level up

2.01 to floor five level, excluding the cost of centering, shuttering, finishing and Cum 5.3 11,505.50 16.63 1,91,322.08 -

reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived

from natural sources : 3 graded stone aggregate 20 mm nominal size

derived from natural sources).

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from natural sources) for floor

Steel work in built up tubular (round, square or rectangular hollow tubes

etc.) trusses etc., including cutting, hoisting, fixing in position and applying

a priming coat of approved steel primer, including welding and bolted with

special shaped washers etc. complete ( ref:Providing and fixing MS square hollow section

(SHS) girder of mentioned sizes for deck slab framework including cutting, welding,

hoisting, fixing in position and applying one coat of approved steel primer)

a) MS square hollow section (SHS) of size 150 × 100 & thickness 6 mm Kg 10.16 194.4 4719.34 9,17,438.92 -

b) MS square hollow section (SHS) girder of size 250 X 250 & thickness 8mm Kg 10.16 194.4 3164.30 6,15,140.70 -

c) MS square hollow section (SHS) girder of size 300x300 & thickness 8mm Kg 10.16 194.4 2029.72 3,94,577.57 -

d) Anchor bolts/ Fastener nos MR 818.8120 118.00 - 96,619.82

3.02 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in kg 5.22.1 107.1 533.52 57,139.99

position and binding all complete up to plinth level./Mild steel and Medium Tensile steel bars

Providing and fixing corrugated / profile metal sheet (deck sheet) of approved make and

thickness(1mm) over MS girders, including cutting to required size, fixing with self-drilling

screws, washers and necessary overlaps, complete as per direction of Engineer-in-charge.

Providing and fixing double scaffolding system (cup lock type) on the

exterior side, up to seven story height made with 40 mm dia M.S. tube

1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock

system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase

system in the scaffolding for working platform etc. and maintaining it in a

serviceable condition for the required duration as approved and removing

it there after. The scaffolding system shall be stiffened with bracings,

runners, connection with the building etc wherever required for inspection

of work at required locations with essential safety features for the workmen

etc. complete as per directions and approval of Engineer-in-charge. The

elevational area of the scaffolding shall be measured for payment purpose.

The payment will be made once irrespective of duration of scaffolding.

4 False Ceiling Work

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 1: Construction of deck slab and allied civil works

Description Unit DSR/MR ref DSR Rate (Rs.) MR Rate (Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

Providing and fixing false ceiling at all heights including providing and fixing of frame work

made of special sections, power pressed from M.S. sheets and galvanized with zinc coating

of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25

mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre,

4.01 one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia Sqm 12.45

bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length

with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the

ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each

12.5 mmlipsthick

of 10.5 mm,edge

tapered at 450 mm centre

gypsum plain to centre,

board shall be fixed

conforming to IS:in2095-

(Board with BIS certification marks)

Same items as above for cove

Note : The vertical surface only be calculated only once.

5 Partition & Panelling work

Providing and fixing aluminium glass partition with 10 mm thick clear toughened glass fixed

in powder coated aluminium framework of approved make and section. The work includes

supply and installation of aluminium channels/sections, cutting, edge polishing of glass,

5.01 gaskets, beading, screws, anchors, sealant and all necessary fittings and accessories Sqm MR 9,149.40 47.70 - 4,36,426.38

required for proper installation. The partition shall be fixed true to line, level and plumb as

per approved drawings and site requirements, complete in all respects including all labour,

materials and tools.

Providing and fixing frosted film on glass of approved make and quality, applied on existing

glass surface as per approved design/pattern. The work includes proper cleaning of glass

surface, cutting the film to required size, application with suitable adhesive solution to

ensure bubble-free finish, edge trimming, and proper alignment. The film shall be fixed true

to line and level as per approved drawings and site requirements, complete with all

materials, labour, tools and accessories required for proper installation.

GYPSUM BOARD PARTITION: Providing and fixing partition upto ceiling height consisting

of G.I. frame and required board, including providing and fixing of frame work made of

special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both

side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32

mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to

centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or

metal screws with nylon plugs and the studs 48mm wide having one flange of 34 mm and

other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling

channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,

including fixing of studs along both ends of partition fixed flush to wall with suitable anchor

fastener or metal screws with nylon plugs at spacing of 450mm centre to centre, and fixing

5.03 of boards to both side of frame work by 25mm long dry wall screws on studs, floor and Sqm 9.105 - -

ceiling channels at the spacing of 300mm centre to centre. The boards are to be fixed to the

frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99mm width

(0.9mm thick having two flanges of 9.5mm each) to be provided at the horizontal joints of

two boards, fixed to the studs using metal to metal flat head screws, including jointing and

finishing to a flush finish with recommended jointing compound, jointing tape, angle beads

at corners (25mmx25mmx0.5mm), joint finisher and two coats of primer suitable for board

as per manufacturer's specification and direction of engineer in charge all complete.

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass Reinforced

a Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS certification 9.105.1 2131.10 21.60 46,031.76 -

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 1: Construction of deck slab and allied civil works

Description Unit DSR/MR ref DSR Rate (Rs.) MR Rate (Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

6 DOOR & WINDOW

Providing and fixing 10 mm thick toughened glass door in powder-coated aluminium frame

of approved make and section, size 900 × 2400 mm. The work includes cutting, edge

polishing of glass, supply and installation of aluminium frame, hinges, handles, lockset,

6.01 gaskets, sealant, and all necessary accessories for proper fixing. The door shall be installed No. MR 48,000.00 3.00 - 1,44,000.00

plumb, level, and aligned, as per approved drawings and site requirements, complete with

all materials, labour, tools, and accessories required for proper installation. LOCATION :

CONFERENCE ROOM 01 & 02

32 mm thick solid core flush door shutters with ISI marked of approved make with

commercial ply facing on both sides and 10mm thick teak wood lipping including the cost of

teak wood beading, moulding over frame as per design and fittings of approved make such

6.02 as heavy quality S.S. 304 grade hinges & SS 304 Quality heavy quality tower bolts, Nos MR 32,000.00 8.00 - 2,56,000.00

handles, aldrop, door stoppers etc. including providing, fixing and grouting 300mm long,

40x3mm M.S. holdfasts in 1:2:4 cement concrete as per drawing/direction of Architect's

including both 1mm laminate, Lipping etc.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc.

6.03 with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and 21.3

the directions of engineer-in-charge.

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) Sqm 21.3.2 1505.25 17.63 26,540.57 -

7 FLOORING WORK

Providing and fixing machine tufted / loop pile carpet tiles of approved make having

minimum 6–8 mm thickness and pile weight about 1100–1200 GSM, laid over 8–10 mm

thick EP foam / rubber underlay and fixed with approved adhesive on prepared floor surface

including cutting, edge finishing and all complete as per direction of Engineer-in-Charge.

Providing and laying Vitrified tiles in floor with different sizes (thickness to

be specified by the manufacturer), with water absorption less than 0.08%

and conforming to IS:15622, of approved brand & manufacturer, in all

7.02 colours and shade, laid with cement based high polymer modified quick Sqm - -

set tile adhesive (water based) conforming to IS : 15477, in average 6 mm

thickness, including grouting of joints (Payment for grouting of joints to be

made separately).

Providing and laying vitrified tiles in skirting and risers of steps of approved brand and

manufacturer, laid with cement-based high polymer modified quick-set tile adhesive (water

based) conforming to IS 15477, in average 6 mm thickness, including jointing with grey

cement slurry / grout etc., complete.

8 FURNITURE WORK

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 1: Construction of deck slab and allied civil works

Description Unit DSR/MR ref DSR Rate (Rs.) MR Rate (Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

Providing and fixing conference room table of size 2200 mm × 900 mm × 750 mm height

made of 25 mm thick Pre-Laminated Particle Board (PLPB) for table top finished with 1 mm

thick approved make decorative laminate on top surface and matching laminate on edges,

including 2 mm thick PVC edge banding on all exposed edges. The table shall be supported

8.01 with 18 mm thick PLPB vertical panels / modesty panel with necessary framework, complete Nos. MR 75,000.00 1.00 75,000.00

with screws, fittings and hardware.

The table shall also be provided with a rectangular flip-top cable manager box (approx. 300

× 120 mm) made of powder-coated aluminium / MS with soft-open lid to accommodate

electrical sockets, data and HDMI ports for conference use. The work shall include cutting in

table top, fixing of flip-top box, cable management provision and finishing complete in all

respects as per approved design and direction of Engineer-in-Charge.

Providing and fixing a TV console / media unit of size 2200 mm (length) × 450 mm (depth) ×

750 mm (height) made of 25 mm thick Pre-Laminated Particle Board (PLPB) for top and 18

mm thick PLPB for sides, shelves, and partitions, finished with 1 mm thick approved

decorative laminate on all exposed surfaces including edges. All exposed edges shall have

8.02 2 mm thick PVC edge banding. The console shall include open shelves, closed storage Nos. MR 35,000.00 1.00 35,000.00

compartments with shutters, and cut-outs for cable management as per approved design.

All necessary hardware including hinges, handles, screws, and fittings shall be provided.

The unit shall be installed in position and finished complete as per directions of Engineer-in-

Providing and supplying office chair with high/medium back, having ergonomically designed

cushioned seat and backrest upholstered in mesh as per approved design and shade. The

8.03 chair shall have height adjustment with gas lift mechanism, tilt mechanism with locking Nos. MR 7,500.00 10 - 75,000.00

arrangement, adjustable armrests, and a 5-legged nylon/metal base fitted with castor

wheels for smooth movement

9 FINISHING WORKS

Providing and applying white cement based putty of average thickness 1

9.01 mm, of approved brand and manufacturer, over the plastered wall surface sqm 13.80 156.05 688 1,07,362.40 -

to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC

a) content less than 50 gram/litre, of approved manufacturer and of required sqm 13.41 -

shade and colour all complete to achieve even shade and colour

New work (two or more coats) over and including water thinnable priming coat with cement

primer having VOC content less than 50 gram/litre

Finishing with Epoxy paint (two or more coats) at all locations prepared

a) and applied as per manufacturer’s specifications including appropriate 13.52

priming coat, preparation of surface, etc. complete.

Grand Total(Incl. GST) 49,46,219.04

Grand Total(Incl. GST) 49,46,219.04

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 2: Interior/Renovation of existing office at 3rd floor level and allied works

Description Unit DSR No. DSR Rate (Rs.) MR Rate (Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

1 Demolition work

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false

ceiling including disposal of unserviceable material and stacking of serviceable

material with in 50 meters lead as directed by Engineerin- charge.

1.02 Dismantling stone slab flooring laid in cement mortar including stacking of sqm 15.25 266.45 133.08 35,459.17 -

serviceable material and disposal of unserviceable material within 50 metres lead.

Demolishing brick work in cement mortar including stacking serviceable material and

disposal within 50 m lead

Dismantling and removing loose/built-in furniture including stacking of serviceable

material within 50 m lead.

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or

waste material by mechanical transport including loading, transporting, unloading to

approved municipal dumping ground for lead upto 10 km for all lifts, complete as per

directions of Engineer-in-charge.

2.01 15 mm cement plaster in CM 1:4 (1 cement : 4 fine sand) Sqm 13.2.1 399.45 9.60 3,834.72 -

Reinforced cement concrete work in beams, suspended floors, roofs

having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands,

plain window sills, staircases and spiral stair cases above plinth level up

2.02 to floor five level, excluding the cost of centering, shuttering, finishing and Cum 5.3 11,505.50 0.27 3,143.76 -

reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived

from natural sources : 3 graded stone aggregate 20 mm nominal size

derived from natural sources).

Plain Cement Concrete: 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from

2.03 natural sources : 8 graded stone aggregate 40 mm nominal size derived from Cum 4.1.8 6,812.00 29.93 2,03,895.08

natural sources) for floor

Formwork - Lintels, beams, plinth beams, girders, bressumers and

Steel reinforcement for R.C.C. work including straightening, cutting, bending,

3.01 placing in position and binding all complete up to plinth level./Mild steel and Medium kg 5.22.1 107.1 11.12 1,190.92

Tensile steel bars

4 Flooring & Stone work

Providing and fixing vitrified floor tiles (anti-skid / matte finish) of size 600×600mm,

4.01 laid on 20 mm thick cement mortar 1:4, including grouting with white cement mixed Sqm 11.41A.3.1 1464.85 133.08 1,94,942.24 -

with pigment, cutting and finishing complete

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the

manufacturer), with water absorption less than 0.08% and conforming to IS: 15622,

4.02 of approved brand & manufacturer, in all colours and shade, in skirting, riser of Sqm 11.47.2 1,893.90 81.71 1,54,754.36 -

steps, laid with cement based high polymer modified quick set tile adhesive (water

based) conforming to IS: 15477, in average 6 mm thickness, including grouting of

5 False Ceiling

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 2: Interior/Renovation of existing office at 3rd floor level and allied works

Description Unit DSR No. DSR Rate (Rs.) MR Rate (Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

Providing and fixing false ceiling at all heights including providing and fixing of frame

work made of special sections, power pressed from M.S. sheets and galvanized with

zinc coating of 120 gms/sqm (both sides) as per IS:277 and consisting of angle

cleats 25 mm wide × 1.6 mm thick with flanges 27 mm and 37 mm at 1200 mm c/c

fixed to ceiling with dash fastener 12.5 mm dia × 50 mm long with bolts. Angle

hangers 25×10×0.50 mm connected to GI intermediate channels 45×15×0.9 mm at

1200 mm c/c, ceiling sections 0.5 mm thick bottom wedge 80 mm with tapered

flanges 26 mm fixed at 450 mm c/c perpendicular to intermediate channel with GI

Including fixing perimeter channels 0.5 mm thick (27 mm high with flanges 20 mm &

30 mm) to walls with rawl plugs at 450 mm c/c, fixing gypsum boards with 3.5 × 25

mm drywall screws at 230 mm c/c, jointing with compound and tape in 3 layers,

finishing flush and applying two coats of primer suitable for board, including

openings for lights, diffusers, grills etc.,

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I)

:2011 (Board with BIS certification marks)

Same items as above for cove

Note : The vertical surface only be calculated only once.

6 Partition & Panelling work

Providing and fixing aluminium glass partition with 10 mm thick clear toughened

glass fixed in powder coated aluminium framework of approved make and section.

The work includes supply and installation of aluminium channels/sections, cutting,

6.01 edge polishing of glass, gaskets, beading, screws, anchors, sealant and all Sqm MR 9,149.40 18.02 - 1,64,908.79

necessary fittings and accessories required for proper installation. The partition

shall be fixed true to line, level and plumb as per approved drawings and site

requirements, complete in all respects including all labour, materials and tools.

Providing and fixing frosted film on glass of approved make and quality, applied on

existing glass surface as per approved design/pattern. The work includes proper

cleaning of glass surface, cutting the film to required size, application with suitable

6.02 adhesive solution to ensure bubble-free finish, edge trimming, and proper alignment. Sqm MR 1,350.00 14.77 - 19,942.20

The film shall be fixed true to line and level as per approved drawings and site

requirements, complete with all materials, labour, tools and accessories required for

proper installation.

Providing and fixing pinup board of approved make and finish, mounted on wall or

partition. The board shall consist of 12 mm thick plywood, finished with fabric of

approved colour and make. The work includes aluminium/wooden framing,

6.03 necessary fasteners, screws, adhesives, edge finishing, and all required fixing Sqm MR 2,500.00 20.10 50,250.00

accessories. The board shall be fixed true to line, level, and plumb as per approved

drawings and site requirements, complete with all materials, labour, tools, and

accessories required for proper installation.

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 2: Interior/Renovation of existing office at 3rd floor level and allied works

Description Unit DSR No. DSR Rate (Rs.) MR Rate (Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

GYPSUM BOARD PARTITION: Providing and fixing partition upto ceiling height

consisting of G.I. frame and required board, including providing and fixing of frame

work made of special section power pressed/ roll form G.I. sheet with zinc coating of

120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm

wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling

at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter

50 mm length or suitable anchor fastener or metal screws with nylon plugs and the

studs 48mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm

thick fixed vertically within flanges of floor and ceiling channel and placed at a

spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of

6.04 studs along both ends of partition fixed flush to wall with suitable anchor fastener or Sqm 9.105 - -

metal screws with nylon plugs at spacing of 450mm centre to centre, and fixing of

boards to both side of frame work by 25mm long dry wall screws on studs, floor and

ceiling channels at the spacing of 300mm centre to centre. The boards are to be

fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing

channel of 99mm width (0.9mm thick having two flanges of 9.5mm each) to be

provided at the horizontal joints of two boards, fixed to the studs using metal to

metal flat head screws, including jointing and finishing to a flush finish with

recommended jointing compound, jointing tape, angle beads at corners

(25mmx25mmx0.5mm), joint finisher and two coats of primer suitable for board as

per manufacturer's specification and direction of engineer in charge all complete.

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass

6.05 Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with Sqm 9.105.1 2131.10 86.30 1,83,904.55

BIS certification marks)

7 DOOR & WINDOW

Providing and fixing 10 mm thick toughened glass door in powder-coated aluminium

frame of approved make and section, size 900 × 2400 mm. The work includes

cutting, edge polishing of glass, supply and installation of aluminium frame, hinges,

7.01 handles, lockset, gaskets, sealant, and all necessary accessories for proper fixing. Nos. MR 48,000.00 2.00 - 96,000.00

The door shall be installed plumb, level, and aligned, as per approved drawings and

site requirements, complete with all materials, labour, tools, and accessories

required for proper installation.

Providing and fixing double leaf door with 10 mm thick toughened glass in powder-

coated aluminium frame of approved make and section. The size of each leaf shall

be as per approved drawings/site requirements. The work includes cutting, edge

7.02 polishing of glass, supply and installation of aluminium frame, hinges, handles, Nos. MR 75,000.00 2.00 - 1,50,000.00

lockset, gaskets, sealant, and all necessary accessories for proper fixing. The door

shall be installed plumb, level, and aligned, complete with all materials, labour,

tools, and accessories required for proper installation.

8 Furniture Work

Providing and fixing linear workstation of size 1200x600x750mm (a) Table top Made

in pre-laminated particle board and 25mm thk Particle board along w/ 2mm thk. pvc

edge banding (b) Leg panel made of 40x40mm Powder coated CRCA Pipe. Legs

8.01 design as per design. (c) Modesty Panel in side and front in pre-laminated particle Nos. MR 25,000.00 25 - 6,25,000.00

board finished with laminate and 18mm thk Particle board along w/ 2mm thk. pvc

edge banding (d) the table to be provided w/ flip top box w/ switch and sockets &

voice points and powder coated cable tray

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 2: Interior/Renovation of existing office at 3rd floor level and allied works

Description Unit DSR No. DSR Rate (Rs.) MR Rate (Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

Providing and fixing linear workstation of size 1800x600x750mm (a) Table top Made

in pre-laminated particle board and 25mm thk Particle board along w/ 2mm thk. pvc

edge banding (b) Leg panel made of 40x40mm Powder coated CRCA Pipe. Legs

8.02 design as per design. (c) Modesty Panel in side and front in pre-laminated particle Nos. MR 32,500.00 1 - 32,500.00

board finished with laminate and 18mm thk Particle board along w/ 2mm thk. pvc

edge banding (d) the table to be provided w/ flip top box w/ switch and sockets &

voice points and powder coated cable tray.

Providing and fixing linear workstation of size 2000x600x750mm (a) Table top Made

in pre-laminated particle board and 25mm thk Particle board along w/ 2mm thk. pvc

edge banding (b) Leg panel made of 40x40mm Powder coated CRCA Pipe. Legs

8.03 design as per design. (c) Modesty Panel in side and front in pre-laminated particle Nos. MR 35,000.00 1 - 35,000.00

board finished with laminate and 18mm thk Particle board along w/ 2mm thk. pvc

edge banding (d) the table to be provided w/ flip top box w/ switch and sockets &

voice points and powder coated cable tray.

Providing and fixing L-Type workstation of size 3000 x 1300 x 750 with main table

width as 600mm and side table width as 600mm: (a) Table top Made in pre-

laminated finished laminate and 25mm thk Particle board along w/ 2mm thk. pvc

edge banding (b) Leg panel made of 40x40mm Powder coated CRCA Pipe. Legs

design as per design. (c) Modesty Panel in side and front in pre-laminated and

18mm thk particle board along w/ 2mm thk. pvc edge banding (d) Side unit w/

storage spaces as per design including drawers w/ soft closing hinges and openable

shutters w/ soft closing hinges. (e) the table to be provided w/ flip top box w/ switch

and sockets & voice points and powder coated cable tray

Providing pedestal storage of size 400 x 400 x 650 with 3 drawer units w/ soft

8.05 closing channels made in powder coated ms sheet (2.0mm thk). The pedestal Nos. MR 7,500.00 28 - 2,10,000.00

drawer to have 5 nos. castors for proper strength & support.

Providing and fixing Storage unit 450mm deep, full height from floor till 2400mm

height made in 18mm thk. pre laminated particle board on all sides while back ply in

12mm thk. pre laminated particle board Storage to be with shutters. Complete

Storage to finished in approved shade of laminate on all sides. Horizontal and

vertical partitions to be provided as per detail drawing in 18mm thk pre laminated

particle board.

Providing and fixing Storage unit 500mm deep, full height from floor till 2400mm

height made in 18mm thk. pre laminated particle board on all sides while back ply in

12mm thk. pre laminated particle board Storage to be with shutters. Complete

Storage to finished in approved shade of laminate on all sides. Horizontal and

vertical partitions to be provided as per detail drawing in 18mm thk pre laminated

particle board.

Providing and fixing Storage unit 600mm deep, full height from floor till 2400mm

height made in 18mm thk. pre laminated particle board on all sides while back ply in

12mm thk. pre laminated particle board Storage to be with shutters. Complete

Storage to finished in approved shade of laminate on all sides. Horizontal and

vertical partitions to be provided as per detail drawing in 18mm thk pre laminated

particle board.

P&F 4-Seater Straight Sofa:

Three-seater straight sofa constructed with an internal framework of kiln-dried

hardwood and commercial-grade plywood, suitable for moderate to high-load

seating applications. Seating area is layered with high-resilience polyurethane foam:

45 Kg/m³ density in seat cushions, 32 Kg/m³ density in backrest and armrest areas.

Upholstered in architect-approved fabric with button-tufted detailing on the seat and

backrest. Sofa rests on concealed powder-coated MS legs with floor protectors.

Dimensions approximately: L1920±25mm x D600±25mm x H450±10mm (seat

height). Base fabric cost: ₹350/m. The contractor to submit shop drawing to

Architect for approval.

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 2: Interior/Renovation of existing office at 3rd floor level and allied works

Description Unit DSR No. DSR Rate (Rs.) MR Rate (Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

P&F 3-Seater Straight Sofa:

Three-seater straight sofa constructed with an internal framework of kiln-dried

hardwood and commercial-grade plywood, suitable for moderate to high-load

seating applications. Seating area is layered with high-resilience polyurethane foam:

45 Kg/m³ density in seat cushions, 32 Kg/m³ density in backrest and armrest areas.

Upholstered in architect-approved fabric with button-tufted detailing on the seat and

backrest. Sofa rests on concealed powder-coated MS legs with floor protectors.

Dimensions approximately: L1750±25mm x D600±25mm x H450±10mm (seat

height). Base fabric cost: ₹350/m. The contractor to submit shop drawing to

Architect for approval.

P&F 600mm Dia pouf seating

Pouf seating constructed with an internal framework of kiln-dried hardwood and

commercial-grade plywood, suitable for moderate to high-load seating applications.

8.11 Seating area is layered with high-resilience polyurethane foam: 45 Kg/m³ density in Nos. MR 18,500.00 2 - 37,000.00

seat cushions. Upholstered in architect-approved fabric with button-tufted detailing

on the seat and backrest. Pouf rests on buffers. Base fabric cost: ₹350/m. The

contractor to submit shop drawing to Architect for approval.

P&F 400x400x450mm side table in 18mm thk top, side, horizontal and vertical board

pre laminated particle board finished with 1mm thk laminate as per approved design

Providing and fixing centre table of size 1200 × 600 × 450 mm, fabricated from 18

mm thick pre-laminated particle board, including top, sides, horizontal and vertical

8.13 members. All exposed surfaces to be finished with 1 mm thick laminate as per Nos. MR 15,500.00 1 - 15,500.00

approved colour and design, complete with necessary edge banding, hardware,

fittings and finishing, in all respects as directed by the Engineer-in-charge.

Providing and supplying office chair with high/medium back, having ergonomically

designed cushioned seat and backrest upholstered in mesh as per approved design

8.14 and shade. The chair shall have height adjustment with gas lift mechanism, tilt Nos. MR 7,500.00 30 - 2,25,000.00

mechanism with locking arrangement, adjustable armrests, and a 5-legged

nylon/metal base fitted with castor wheels for smooth movement

9 FINISHING WORKS

Providing and applying white cement based putty of average thickness 1 mm, of

9.01 approved brand and manufacturer, over the plastered wall surface to prepare the sqm 13.8 156.05 629.462 98,227.61 -

surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC

9.02 content less than 50 gram/litre, of approved manufacturer and of required shade and sqm 13.41 - -

colour all complete to achieve even shade and colour

New work (two or more coats) over and including water thinnable priming coat with

cement primer having VOC content less than 50 gram/litre

Grand Total(Incl. GST) 40,30,881.43

Grand Total(Incl. GST) 40,30,881.43

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 2: Interior/Renovation of existing office at 3rd floor level and allied works

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS in conference room

Description Unit DSR No. DSR Rate (Rs.) MR Rate (Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS

/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit,

1.01 with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm 1.3

FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point

(without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper

1.02 conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.54

1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq.mm FRLS/HFFR PVC insulated copper conductor

single core cable in surface/ recessed steel conduit along with 1 No. 4 sq. mm FRLS PVC

insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

iii 3 pin 5/6 amp socket outlet Each 1.24.4 136.00 9.00 1224.00 0.00

iv 6 pin 15/16 amp socket outlet Each 1.24.5 219.00 9.00 1971.00 0.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

excluding modular plate as required.

Supplying and fixing following size/module, GI box along with Modular base & cover plate for

modular switches in recess etc. as required.

Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in

1.07 recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, Each MR 533.00 5.00 0.00 2665.00

"C" curve including connections, painting etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.09 surface/ recess including cutting the wall and making good the same incase of recessed 1.21

conduit as required

Light Fixtures And Fan

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 2: Interior/Renovation of existing office at 3rd floor level and allied works

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS in conference room

Description Unit DSR No. DSR Rate (Rs.) MR Rate (Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current

(BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long

down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power

Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance

as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation

1.10 with regulator for speed control and all remaining accessories including safety pin, nut bolts, 9.20

washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm,

suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan

i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single

core cable and earthing etc. as required.

1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) Each 9.2.3 2695.00 5.00 13475.00 0.00

Supplying and fixing two module stepped type electronic fan regulator on the existing

1.11 modular plate switch box including connections but excluding modular plate etc. as required. Each 1.25 402.00 5.00 2010.00 0.00

Providing and fixing 400 mm wall fan including wiring, earthing, mounting clamps and

connections complete

TELEPHONE AND TV

Supplying and drawing following pair 0.5 mm dia FRLS/HFFR PVC insulated annealed

1.13 copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC 1.18

conduit as required.

Supplying and fixing following modular switch / socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

i Telephone socket outlet Each 1.24.6 168.00 4.00 672.00 0.00

ii TV antenna socket outlet Each 1.24.7 168.00 3.00 504.00 0.00

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with

1.15 suitable size of phenolic laminated sheet cover in front including painting etc. as required. 1.22

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

1.16 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the Meter 1.19 54.00 32.00 1728.00 0.00

exisitng surface/recessed steel/ PVC conduit as required

Supplying, Installation, Testing and commissioning of CAT6A Copper Information Outlet (IO)

with face plate of color as per site requirement, should have ETL/UL verification program

1.17 certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should Each 39.15 302.00 8.00 2416.00 0.00

be from same OEM to maintain compatibility and interoperability etc. complete as required.

Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG

Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4

pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-

1.18 568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating 39.17

Temperature Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C

and Pulling Force : 11.5Kg etc. complete as required.

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along

with required suitable number of GI couplers for joining raceways and fixing GI brackets and

all accessories complete in all respect as per the directions of engineer in charge

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables

at the intersection of raceways supplied completely with base and cover plates, height

adjustable junction box 65- 90 mm including all accessories ss plate of 3mm thick complete

in all respect as per the directions of engineer in charge

Total Amount(Incl. GST) 1,44,026.00 1,03,059.00

Total Amount(Incl. GST) 1,44,026.00 1,03,059.00

Total Amount(Incl. GST) 2,47,085.00

Total Amount(Incl. GST) 2,47,085.00

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 2: Interior/Renovation of existing office at 3rd floor level and

S.No. Description Unit DSR/MR ref Qty. Rate (Rs.) DSR Amount

Supply, installation, testing and commissioning of 1.5 TR high wall split

1 type air conditioner complete with indoor unit, outdoor unit, cordless Nos. MR 1 43,000.00 43,000.00

Supply, installation, testing and commissioning of 4 TR Cassette Type

2 Inverter Air Conditioner complete with indoor unit, outdoor unit, panel, Nos. MR 3 1,34,500.00 4,03,500.00

Supply, installation, testing and commissioning of existing split ac

complete with indoor unit, outdoor unit, panel, drain pump.

Supply and laying of refrigerant copper piping with nitrile rubber

4 insulation (9mm thick) including fittings, clamps, supports and sleeves. Rmt. MR 45 1,350.00 60,750.00

Supply and Installation of Interconnecting electrical wiring between

5 indoor and outdoor unit using 4 core × 2.5 sq.mm FRLS copper cable, Rmt. MR 45 250.00 11,250.00

including control wiring where required.

Supply and fixing of UPVC condensate drain piping including fittings,

clamps and supports complete.

Supply and fixing of MS fabricated stand for outdoor AC unit with anti-

vibration rubber pads and anti-corrosive paint.

Supply and laying of power cable including 32 Amp DP MCB, 32 Amp

8 DP isolator switch, control wiring and earthing for AC units complete as LS MR 1 30,000.00 30,000.00

9 ancilary civil works incl. Chiseling Work as required. LS MR 1 10,000.00 10,000.00

Total (Incl. GST) 6,21,250.00

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 2: Interior/Renovation of existing office at 3rd floor level and allied

S.No. Description Unit DSR/MR ref Qty Rate Amount

"Supply, Installation, Testing and Commissioning of COB-based recessed Low

Height downlight luminaire Amber, System power: 15W, Luminous flux of

luminaire 1350lm, Colour temperature of 4000K, Neutral White, CRI>90,

MacAdam 3, T.H.D ≤ 10%, driver efficiency ≥ 88%, surge protection of 2.5 kV,

230V constant current driver, 70% of luminous flux after 50,000 operating hours;

1 Energy-efficient COB, Direct light emission, Luminaire housing in aluminium, Nos MR 15 4,200.00 63,000.00

Polyester powder White coloured coat applied over a 5-stage pre-treatment,

anti-glare black reflector with 60 degree beam angle, UGR,19, ZHLS (ZERO

HALOGEN LOW SMOKE) wiring, Electronic control gear Protection class II, IP

40, Ø = 93 mm, Ø(Cut Out) = 85 mm, H = 60 mm. "

Supply, Installation, Testing and Commissioning of Cove mounted LED strip

(flexible), with 60 LEDs per meter, 2835 SMD package with a thermal tape of

high thermal convection factor, system power: 6W/ meter, luminous flux 300 lm,

colour temperature of 4000 K, Neutral White, CRI > 80, 12 V DC, constant

voltage driving circuit, Electronic control gear, Protection Class II, IP20,

THD<15%, Driver efficiency>88%, Surge proetction of 2.5kV

Total Amount(Incl. GST) 76,500.00

Total Amount(Incl. GST) 76,500.00

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 3:Interior/Renovation works at 4th floor level and allied works

Description Unit DSR/MR ref DSR Rate (Rs.) MR Rate(Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks

of class designation 7.5 in superstructure above plinth level up to floor level.

Cement mortar 1:3 (1 cement :3 coarse sand) 6.13.1 1,150.50 63.00 72,481.50

1.02 15 mm cement plaster in CM 1:4 (1 cement : 4 fine sand) Sqm 13.2.1 399.45 126.00 50,330.70 -

Reinforced cement concrete work in beams, suspended floors, roofs

having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands,plain

window sills, staircases and spiral stair cases above plinth level up to floor five

level, excluding the cost of centering, shuttering, finishing and reinforcement with

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derivedfrom natural sources : 3

graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and laying in position cement concrete of specified grade

excluding the cost of centering and shuttering :1:4:8 (1 Cement : 4 coarse sand

(zone-III) derived from natural sources : 8 graded stone aggregate 40 mm

nominal size derived from natural sources) for floor

Formwork - Lintels, beams, plinth beams, girders, bressumers and

Steel reinforcement for R.C.C. work including straightening, cutting, bending,

placing in position and binding all complete up to plinth level.

3 Flooring & Stone work

Providing and fixing vitrified floor tiles (anti-skid / matte finish) of size 600×600mm

3.01 or above, laid on 20 mm thick cement mortar 1:4, including grouting with white Sqm 11.41A.3.1 1464.85 133.08 1,94,942.24 -

cement mixed with pigment, cutting and finishing complete

Providing and laying Vitrified tiles in different sizes (thickness to be specified by

the manufacturer), with water absorption less than 0.08% and conforming to IS:

15622, of approved brand & manufacturer, in all colours and shade, in skirting,

riser of steps, laid with cement based high polymer modified quick set tile

adhesive (water based) conforming to IS: 15477, in average 6 mm thickness,

including grouting of joints (size: 600x600 mm)

4 False Ceiling

Providing and fixing false ceiling at all heights including providing and fixing of

frame work made of special sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both sides) as per IS:277 and

consisting of angle cleats 25 mm wide × 1.6 mm thick with flanges 27 mm and 37

mm at 1200 mm c/c fixed to ceiling with dash fastener 12.5 mm dia × 50 mm long

with bolts. Angle hangers 25×10×0.50 mm connected to GI intermediate

channels 45×15×0.9 mm at 1200 mm c/c, ceiling sections 0.5 mm thick bottom

4.01 wedge 80 mm with tapered flanges 26 mm fixed at 450 mm c/c perpendicular to Sqm 12.45

intermediate channel with GI wire clips.

Including fixing perimeter channels 0.5 mm thick (27 mm high with flanges 20 mm

& 30 mm) to walls with rawl plugs at 450 mm c/c, fixing gypsum boards with 3.5 ×

25 mm drywall screws at 230 mm c/c, jointing with compound and tape in 3

layers, finishing flush and applying two coats of primer suitable for board,

including openings for lights, diffusers, grills etc.,

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I)

:2011 (Board with BIS certification marks)

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 3:Interior/Renovation works at 4th floor level and allied works

Description Unit DSR/MR ref DSR Rate (Rs.) MR Rate(Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

Same items as above for cove

Note : The vertical surface only be calculated only once.

5 Partition & Panelling work

Providing and fixing aluminium glass partition with 10 mm thick clear toughened

glass fixed in powder coated aluminium framework of approved make and

section. The work includes supply and installation of aluminium

channels/sections, cutting, edge polishing of glass, gaskets, beading, screws,

anchors, sealant and all necessary fittings and accessories required for proper

installation. The partition shall be fixed true to line, level and plumb as per

approved drawings and site requirements, complete in all respects including all

labour, materials and tools.

Providing and fixing frosted film on glass of approved make and quality, applied

on existing glass surface as per approved design/pattern. The work includes

proper cleaning of glass surface, cutting the film to required size, application with

5.02 suitable adhesive solution to ensure bubble-free finish, edge trimming, and Sqm MR 1,350.00 13.69 - 18,484.20

proper alignment. The film shall be fixed true to line and level as per approved

drawings and site requirements, complete with all materials, labour, tools and

accessories required for proper installation.

Providing and fixing pinup board of approved make and finish, mounted on wall

or partition. The board shall consist of 12 mm thick plywood, finished with fabric of

approved colour and make. The work includes aluminium/wooden framing,

5.03 necessary fasteners, screws, adhesives, edge finishing, and all required fixing Sqm MR 2,500.00 20.10 50,250.00

accessories. The board shall be fixed true to line, level, and plumb as per

approved drawings and site requirements, complete with all materials, labour,

tools, and accessories required for proper installation.

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 3:Interior/Renovation works at 4th floor level and allied works

Description Unit DSR/MR ref DSR Rate (Rs.) MR Rate(Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

GYPSUM BOARD PARTITION: Providing and fixing partition upto ceiling height

consisting of G.I. frame and required board, including providing and fixing of

frame work made of special section power pressed/ roll form G.I. sheet with zinc

coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling

channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to

the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener

of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws

with nylon plugs and the studs 48mm wide having one flange of 34 mm and other

flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling

channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts

and nuts, including fixing of studs along both ends of partition fixed flush to wall

with suitable anchor fastener or metal screws with nylon plugs at spacing of

450mm centre to centre, and fixing of boards to both side of frame work by

25mm long dry wall screws on studs, floor and ceiling channels at the spacing of

300mm centre to centre. The boards are to be fixed to the frame work with joints

staggered to avoid through cracks, M.S. fixing channel of 99mm width (0.9mm

thick having two flanges of 9.5mm each) to be provided at the horizontal joints of

two boards, fixed to the studs using metal to metal flat head screws, including

jointing and finishing to a flush finish with recommended jointing compound,

jointing tape, angle beads at corners (25mmx25mmx0.5mm), joint finisher and

two coats of primer suitable for board as per manufacturer's specification and

direction of engineer in charge all complete.

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass

Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board Sqm 9.105.1 2131.10 86.30 1,83,904.55

with BIS certification marks)

6 DOOR & WINDOW

Providing and fixing 10 mm thick toughened glass door in powder-coated

aluminium frame of approved make and section, size 900 × 2400 mm. The work

includes cutting, edge polishing of glass, supply and installation of aluminium

6.01 frame, hinges, handles, lockset, gaskets, sealant, and all necessary accessories No. MR 48,000.00 1.00 - 48,000.00

for proper fixing. The door shall be installed plumb, level, and aligned, as per

approved drawings and site requirements, complete with all materials, labour,

tools, and accessories required for proper installation.

Providing and fixing double leaf door with 10 mm thick toughened glass in

powder-coated aluminium frame of approved make and section. The size of each

leaf shall be as per approved drawings/site requirements. The work includes

6.02 cutting, edge polishing of glass, supply and installation of aluminium frame, No. MR 75,000.00 2.00 - 1,50,000.00

hinges, handles, lockset, gaskets, sealant, and all necessary accessories for

proper fixing. The door shall be installed plumb, level, and aligned, complete with

all materials, labour, tools, and accessories required for proper installation.

32 mm thick solid core flush door shutters with ISI marked of approved make with

commercial ply facing on both sides and 10mm thick teak wood lipping including

the cost of teak wood beading, moulding over frame as per design and fittings of

approved make such as heavy quality S.S. 304 grade hinges & SS 304 Quality

heavy quality tower bolts, handles, aldrop, door stoppers etc. including providing,

fixing and grouting 300mm long, 40x3mm M.S. holdfasts in 1:2:4 cement

concrete as per drawing/direction of Architect's including both 1mm laminate,

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 3:Interior/Renovation works at 4th floor level and allied works

Description Unit DSR/MR ref DSR Rate (Rs.) MR Rate(Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

7 Furniture Work

Providing and fixing linear workstation of size 1200x600x750mm (a) Table top

Made in pre-laminated particle board and 25mm thk Particle board along w/ 2mm

thk. pvc edge banding (b) Leg panel made of 40x40mm Powder coated CRCA

7.01 Pipe. Legs design as per design. (c) Modesty Panel in side and front in pre- Nos. MR 25,000.00 25 - 6,25,000.00

laminated particle board finished with laminate and 18mm thk Particle board

along w/ 2mm thk. pvc edge banding (d) the table to be provided w/ flip top box

w/ switch and sockets & voice points and powder coated cable tray

Providing and fixing linear workstation of size 1800x600x750mm (a) Table top

Made in pre-laminated particle board and 25mm thk Particle board along w/ 2mm

thk. pvc edge banding (b) Leg panel made of 40x40mm Powder coated CRCA

7.02 Pipe. Legs design as per design. (c) Modesty Panel in side and front in pre- Nos. MR 32,500.00 1 - 32,500.00

laminated particle board finished with laminate and 18mm thk Particle board

along w/ 2mm thk. pvc edge banding (d) the table to be provided w/ flip top box

w/ switch and sockets & voice points and powder coated cable tray.

Providing and fixing linear workstation of size 2000x600x750mm (a) Table top

Made in pre-laminated particle board and 25mm thk Particle board along w/ 2mm

thk. pvc edge banding (b) Leg panel made of 40x40mm Powder coated CRCA

7.03 Pipe. Legs design as per design. (c) Modesty Panel in side and front in pre- Nos. MR 35,000.00 1 - 35,000.00

laminated particle board finished with laminate and 18mm thk Particle board

along w/ 2mm thk. pvc edge banding (d) the table to be provided w/ flip top box

w/ switch and sockets & voice points and powder coated cable tray.

Providing and fixing L-Type workstation of size 3000 x 1300 x 750 with main table

width as 600mm and side table width as 600mm: (a) Table top Made in pre-

laminated finished laminate and 25mm thk Particle board along w/ 2mm thk. pvc

edge banding (b) Leg panel made of 40x40mm Powder coated CRCA Pipe. Legs

design as per design. (c) Modesty Panel in side and front in pre-laminated and

18mm thk particle board along w/ 2mm thk. pvc edge banding (d) Side unit w/

storage spaces as per design including drawers w/ soft closing hinges and

openable shutters w/ soft closing hinges. (e) the table to be provided w/ flip top

box w/ switch and sockets & voice points and powder coated cable tray

Providing pedestal storage of size 400 x 400 x 650 with 3 drawer units w/ soft

7.05 closing channels made in powder coated ms sheet (2.0mm thk). The pedestal Nos. MR 7,500.00 28 - 2,10,000.00

drawer to have 5 nos. castors for proper strength & support.

Providing and fixing Storage unit 450mm deep, full height from floor till 2400mm

height made in 18mm thk. pre laminated particle board on all sides while back ply

in 12mm thk. pre laminated particle board Storage to be with shutters. Complete

Storage to finished in approved shade of laminate on all sides. Horizontal and

vertical partitions to be provided as per detail drawing in 18mm thk pre laminated

particle board.

Providing and fixing Storage unit 500mm deep, full height from floor till 2400mm

height made in 18mm thk. pre laminated particle board on all sides while back ply

in 12mm thk. pre laminated particle board Storage to be with shutters. Complete

Storage to finished in approved shade of laminate on all sides. Horizontal and

vertical partitions to be provided as per detail drawing in 18mm thk pre laminated

particle board.

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 3:Interior/Renovation works at 4th floor level and allied works

Description Unit DSR/MR ref DSR Rate (Rs.) MR Rate(Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

Providing and fixing Storage unit 600mm deep, full height from floor till 2400mm

height made in 18mm thk. pre laminated particle board on all sides while back ply

in 12mm thk. pre laminated particle board Storage to be with shutters. Complete

Storage to finished in approved shade of laminate on all sides. Horizontal and

vertical partitions to be provided as per detail drawing in 18mm thk pre laminated

particle board.

P&F 4-Seater Straight Sofa:

Three-seater straight sofa constructed with an internal framework of kiln-dried

hardwood and commercial-grade plywood, suitable for moderate to high-load

seating applications. Seating area is layered with high-resilience polyurethane

foam: 45 Kg/m³ density in seat cushions, 32 Kg/m³ density in backrest and

armrest areas. Upholstered in architect-approved fabric with button-tufted

detailing on the seat and backrest. Sofa rests on concealed powder-coated MS

legs with floor protectors. Dimensions approximately: L1920±25mm x

D600±25mm x H450±10mm (seat height). Base fabric cost: ₹350/m. The

contractor to submit shop drawing to Architect for approval.

P&F 3-Seater Straight Sofa:

Three-seater straight sofa constructed with an internal framework of kiln-dried

hardwood and commercial-grade plywood, suitable for moderate to high-load

seating applications. Seating area is layered with high-resilience polyurethane

foam: 45 Kg/m³ density in seat cushions, 32 Kg/m³ density in backrest and

armrest areas. Upholstered in architect-approved fabric with button-tufted

detailing on the seat and backrest. Sofa rests on concealed powder-coated MS

legs with floor protectors. Dimensions approximately: L1750±25mm x

D600±25mm x H450±10mm (seat height). Base fabric cost: ₹350/m. The

contractor to submit shop drawing to Architect for approval.

P&F 600mm Dia pouf seating

Pouf seating constructed with an internal framework of kiln-dried hardwood and

commercial-grade plywood, suitable for moderate to high-load seating

applications. Seating area is layered with high-resilience polyurethane foam: 45

Kg/m³ density in seat cushions. Upholstered in architect-approved fabric with

button-tufted detailing on the seat and backrest. Pouf rests on buffers. Base

fabric cost: ₹350/m. The contractor to submit shop drawing to Architect for

P&F 400x400x450mm side table in 18mm thk top, side, horizontal and vertical

7.12 board pre laminated particle board finished with 1mm thk laminate as per Nos. MR 15,500.00 2 - 31,000.00

approved design

Providing and fixing centre table of size 1200 × 600 × 450 mm, fabricated from 18

mm thick pre-laminated particle board, including top, sides, horizontal and vertical

7.13 members. All exposed surfaces to be finished with 1 mm thick laminate as per Nos. MR 15,500.00 1 - 15,500.00

approved colour and design, complete with necessary edge banding, hardware,

fittings and finishing, in all respects as directed by the Engineer-in-charge.

Providing and supplying office chair with high/medium back, having

ergonomically designed cushioned seat and backrest upholstered in mesh as per

7.14 approved design and shade. The chair shall have height adjustment with gas lift Nos. MR 7,500.00 30 - 2,25,000.00

mechanism, tilt mechanism with locking arrangement, adjustable armrests, and a

5-legged nylon/metal base fitted with castor wheels for smooth movement

8 FINISHING WORKS

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 3:Interior/Renovation works at 4th floor level and allied works

Description Unit DSR/MR ref DSR Rate (Rs.) MR Rate(Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

Providing and applying white cement based putty of average thickness 1

8.1 mm, of approved brand and manufacturer, over the plastered wall surface sqm 13.8 156.05 755.355 1,17,873.13 -

to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC

8.2 content less than 50 gram/litre, of approved manufacturer and of required sqm 13.41 - -

shade and colour all complete to achieve even shade and colour

New work (two or more coats) over and including water thinnable priming coat

with cement primer having VOC content less than 50 gram/litre

Grand Total(Incl. GST) 38,57,098.71

Grand Total(Incl. GST) 38,57,098.71

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 3:Interior/Renovation works at 4th floor level and allied works

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

Description Unit DSR/MR ref DSR Rate (Rs.) MR Rate (Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS /HFFR

PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with

1.01 modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm 1.3

FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point

(without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper

1.02 conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 1.54

sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq.mm FRLS/HFFR PVC insulated copper conductor

single core cable in surface/ recessed steel conduit along with 1 No. 4 sq. mm FRLS PVC

insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

iii 3 pin 5/6 amp socket outlet Each 1.24.4 136.00 18.00 2448.00 0.00

iv 6 pin 15/16 amp socket outlet Each 1.24.5 219.00 18.00 3942.00 0.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

excluding modular plate as required.

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in

1.07 recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, Each MR 533.00 9.00 0.00 4797.00

"C" curve including connections, painting etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.09 surface/ recess including cutting the wall and making good the same incase of recessed 1.21

conduit as required

Light Fixtures And Fan

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 3:Interior/Renovation works at 4th floor level and allied works

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

Description Unit DSR/MR ref DSR Rate (Rs.) MR Rate (Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current

(BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down

rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not

less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS :

374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with

1.10 regulator for speed control and all remaining accessories including safety pin, nut bolts, 9.20

washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm,

suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan

i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single

core cable and earthing etc. as required.

1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) Each 9.2.3 2695.00 14.00 37730.00 0.00

Supplying and fixing two module stepped type electronic fan regulator on the existing modular

1.11 plate switch box including connections but excluding modular plate etc. as required. Each 1.25 402.00 14.00 5628.00 0.00

TELEPHONE AND TV

Supplying and drawing following pair 0.5 mm dia FRLS/HFFR PVC insulated annealed

1.12 copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC 1.18

conduit as required.

Supplying and fixing following modular switch / socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

i Telephone socket outlet Each 1.24.6 168.00 8.00 1344.00 0.00

ii TV antenna socket outlet Each 1.24.7 168.00 4.00 672.00 0.00

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with

1.14 suitable size of phenolic laminated sheet cover in front including painting etc. as required. 1.22

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

1.15 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Meter 1.19 54.00 64.00 3456.00 0.00

surface/recessed steel/ PVC conduit as required

Supplying, Installation, Testing and commissioning of CAT6A Copper Information Outlet (IO)

with face plate of color as per site requirement, should have ETL/UL verification program

1.16 certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should Each 39.15 302.00 8.00 2416.00 0.00

be from same OEM to maintain compatibility and interoperability etc. complete as required.

Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG

Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair

should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-

1.17 D standard. Outer diameter should be in the range of 6.1mm nominal with Operating 39.17

Temperature Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C

and Pulling Force : 11.5Kg etc. complete as required.

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 3:Interior/Renovation works at 4th floor level and allied works

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

Description Unit DSR/MR ref DSR Rate (Rs.) MR Rate (Rs.) Qty DSR Amount (Rs.) MR Amount (Rs.)

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables

at the intersection of raceways supplied completely with base and cover plates, height

adjustable junction box 65- 90 mm including all accessories ss plate of 3mm thick complete

in all respect as per the directions of engineer in charge

Total Amount (Incl. GST) 4,76,277.00

Total Amount (Incl. GST) 4,76,277.00

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 3:Interior/Renovation works at 4th floor level and allied works

S.No. Description Unit DSR/MR ref Qty Rate Amount

"Supply, Installation, Testing and Commissioning of COB-based recessed Low Height

downlight luminaire Amber, System power: 15W, Luminous flux of luminaire 1350lm,

Colour temperature of 4000K, Neutral White, CRI>90, MacAdam 3, T.H.D ≤ 10%,

driver efficiency ≥ 88%, surge protection of 2.5 kV, 230V constant current driver, 70%

of luminous flux after 50,000 operating hours; Energy-efficient COB, Direct light

emission, Luminaire housing in aluminium, Polyester powder White coloured coat

applied over a 5-stage pre-treatment, anti-glare black reflector with 60 degree beam

angle, UGR,19, ZHLS (ZERO HALOGEN LOW SMOKE) wiring, Electronic control gear

Protection class II, IP 40, Ø = 93 mm, Ø(Cut Out) = 85 mm, H = 60 mm. "

Supply, Installation, Testing and Commissioning of Cove mounted LED strip (flexible),

with 60 LEDs per meter, 2835 SMD package with a thermal tape of high thermal

convection factor, system power: 6W/ meter, luminous flux 300 lm, colour temperature

of 4000 K, Neutral White, CRI > 80, 12 V DC, constant voltage driving circuit,

Electronic control gear, Protection Class II, IP20, THD<15%, Driver efficiency>88%,

Surge proetction of 2.5kV

Total Amount(Incl. GST) 63,900.00

Total Amount(Incl. GST) 63,900.00

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 3:Interior/Renovation works at 4th floor level and allied works

S.No. Description Unit DSR /MR ref Qty.

Supply, installation, testing and commissioning of 1.5 TR high wall split

1 type air conditioner complete with indoor unit, outdoor unit, cordless Nos. MR 1 43,000.00 43,000.00

Supply, installation, testing and commissioning of 4 TR Cassette Type

2 Inverter Air Conditioner complete with indoor unit, outdoor unit, panel, Nos. MR 3 1,34,500.00 4,03,500.00

Supply and laying of refrigerant copper piping with nitrile rubber

3 insulation (9mm thick) including fittings, clamps, supports and sleeves. Rmt. MR 45 1,350.00 60,750.00

Supply and Installation of Interconnecting electrical wiring between

4 indoor and outdoor unit using 4 core × 2.5 sq.mm FRLS copper cable, Rmt. MR 45 250.00 11,250.00

including control wiring where required.

Supply and fixing of UPVC condensate drain piping including fittings,

clamps and supports complete.

Supply and fixing of MS fabricated stand for outdoor AC unit with anti-

vibration rubber pads and anti-corrosive paint.

Supply and laying of power cable including 32 Amp DP MCB, 32 Amp

7 DP isolator switch, control wiring and earthing for AC units complete as LS MR 1 30,000.00 30,000.00

8 ancilary civil works incl. Chiseling Work for hvac system installation LS MR 1 10,000.00 10,000.00

Total(Incl. GST) 5,86,250.00

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 4: Electrical and allied works of office space at 3rd and 4th floor level.

Description Unit DSR/MR ref DSR Rate (in Rs.) MR Rate (in Rs.) Qty DSR Amount (in Rs.) MR Amount (in Rs.)

Third floor level

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS /HFFR

PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with

1.01 modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm 1.3

FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point

(without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper

1.02 conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 1.54

sq. mm FRLS/HFFR insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq.mm FRLS/HFFR PVC insulated copper conductor

single core cable in surface/ recessed steel conduit along with 1 No. 4 sq. mm FRLS/HFFR

PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

iii 3 pin 5/6 amp socket outlet Each 1.24.4 136.00 40.00 5440.00 0.00

iv 6 pin 15/16 amp socket outlet Each 1.24.5 219.00 5.00 1095.00 0.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

excluding modular plate as required.

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in

1.07 recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, Each MR 533.00 14.00 0.00 7462.00

"C" curve including connections, painting etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR

1.09 PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as 1.70

iii 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 1.7.3 476.00 30.00 14280.00 0.00

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 4: Electrical and allied works of office space at 3rd and 4th floor level.

Description Unit DSR/MR ref DSR Rate (in Rs.) MR Rate (in Rs.) Qty DSR Amount (in Rs.) MR Amount (in Rs.)

Third floor level

Supplying and making end termination with brass compression gland and aluminium lugs for

1.10 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 11.1

KV grade as required.

Supply,laying, termination, testing and commissioning of following XPLE armourned 1.1 KV

grade conforming to I.S.7098/1554 Aluminium Conductor Cables :

Supply,laying, termination, testing and commissioning of following sizes of PVC sheathed

i PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade conforming to

IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

a 3.5 C x 120 Sqmm XLPE cable Metre MR 1078.00 3.00 0.00 3234.00

b 3.5 C x 95 Sqmm XLPE cable Metre MR 864.00 3.00 0.00 2592.00

c 3.5 C x 70 Sqmm XLPE cable Metre MR 680.00 5.00 0.00 3400.00

d 3.5 C x 50 Sqmm XLPE cable Metre MR 510.00 4.00 0.00 2040.00

e 3.5 C x 35 Sqmm XLPE cable Metre MR 378.00 4.00 0.00 1512.00

Supply,laying, termination, testing and commissioning of following sizes of copper cables -

ii PVC sheathed PVC/XLPE insulated Copper conductor armoured cable of 1.1 KV grade

conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

4 C x 16 Sqmm XLPE copper cable

4 C x 25 Sqmm XLPE copper cable

3.5 C x 35 Sqmm XLPE copper cable

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 4: Electrical and allied works of office space at 3rd and 4th floor level.

Description Unit DSR/MR ref DSR Rate (in Rs.) MR Rate (in Rs.) Qty DSR Amount (in Rs.) MR Amount (in Rs.)

Third floor level

3.5 C x 50 Sqmm XLPE copper cable

Distribution Board

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

1.13 breaker suitable for inductive load of following poles in the existing MCB DB complete with 2.10

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing of 40 amps rating, four pole, 415 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in

the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution

board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth

bar, din bar, interconnections, powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

required. (But without MCB/ RCCB/ Isolator)

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN

MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A

1.19 tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but 2.50

without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used

where 3 phase outlets are required.)

1.20 Supplying and fixing following rating, 240 volts, "C" curve, miniattlre circuit breaker suitable for

lnductive loads of following poles in the existing MCB DB complete with connections, testing

and commissioning etc. as required.

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 4: Electrical and allied works of office space at 3rd and 4th floor level.

Description Unit DSR/MR ref DSR Rate (in Rs.) MR Rate (in Rs.) Qty DSR Amount (in Rs.) MR Amount (in Rs.)

Third floor level

Supplying and fixing of following sizes of steel conduit along with accessories in

1.21 surface/recess including painting in case of surface conduit, or cutting the wall and making 1.20

good the same in case of recessed conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.22 surface/ recess including cutting the wall and making good the same incase of recessed 1.21

conduit as required

Light Fixtures And Fan

Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current

(BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down

rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not

less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS :

374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with

1.23 regulator for speed control and all remaining accessories including safety pin, nut bolts, 9.20

washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm,

suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan

i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single

core cable and earthing etc. as required.

1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) Each 9.2.3 2695.00 11.00 29645.00 0.00

Supplying and fixing two module stepped type electronic fan regulator on the existing modular

1.24 plate switch box including connections but excluding modular plate etc. as required. Each 1.25 402.00 11.00 4422.00 0.00

Providing and fixing 400 mm wall fan including wiring, earthing, mounting clamps and

connections complete

TELEPHONE AND TV

Supplying and drawing following pair 0.5 mm dia FRLS/HFFR PVC insulated annealed

1.26 copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC 1.18

conduit as required.

Supplying and fixing following modular switch / socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

i Telephone socket outlet Each 1.24.6 168.00 32.00 5376.00 0.00

ii TV socket outlet Each 1.24.7 168.00 3.00 504.00 0.00

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with

1.28 suitable size of phenolic laminated sheet cover in front including painting etc. as required. 1.22

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

1.29 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Meter 1.19 54.00 120.00 6480.00 0.00

surface/recessed steel/ PVC conduit as required

Supplying, Installation, Testing and commissioning of CAT6A Copper Information Outlet (IO)

with face plate of color as per site requirement, should have ETL/UL verification program

1.30 certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should Each 39.15 302.00 32.00 9664.00 0.00

be from same OEM to maintain compatibility and interoperability etc. complete as required.

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 4: Electrical and allied works of office space at 3rd and 4th floor level.

Description Unit DSR/MR ref DSR Rate (in Rs.) MR Rate (in Rs.) Qty DSR Amount (in Rs.) MR Amount (in Rs.)

Third floor level

Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG

Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair

should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-

1.31 D standard. Outer diameter should be in the range of 6.1mm nominal with Operating 39.17

Temperature Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C

and Pulling Force : 11.5Kg etc. complete as required.

1.32 Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge

150mmx25mm(GI) Metre MR 1950 30 0 58500

1.33 Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables

at the intersection of raceways supplied completely with base and cover plates, height

adjustable junction box 65- 90 mm including all accessories ss plate of 3mm thick complete

in all respect as per the directions of engineer in charge

FIRE ALARM SYSTEM

Supplying, installation, testing & commissioning of intelligent addressable thermal detector

1.34 with rate of rise cum fixed temperature thermistor complete with base as required. Each 28.2.9 2866.00 8.00 22928.00 0.00

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

1.35 copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath Mtr 28.5.2 192.00 175.00 33600.00 0.00

complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

1.37 existing surface / recessed steel conduit of following pairs, cores and size including 28.5.3

connections and interconnections etc. as required.

speaker cable Single pair, 2-core, 1.5 sqmm Mtr MR 60.00 325.00 0.00 19500.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries

and accessories like coupler etc. as required.

Supply, installation, connecting, testing and commissioning of addressable photoelectric type

Smoke Detectors with mounting base, blinking LED etc. complete as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

providing masonry enclosure with cover plate having locking arrangement and watering pipe

of 2.7 Meter long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc.

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 4: Electrical and allied works of office space at 3rd and 4th floor level.

Description Unit DSR/MR ref DSR Rate (in Rs.) MR Rate (in Rs.) Qty DSR Amount (in Rs.) MR Amount (in Rs.)

Third floor level

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

IP based CCTV SYSTEM

Supplying, Installation, Testing and Commissioning of 2 MP IP IR Dome Camera having

following specifications: Signal System PAL/NTSC, Signal to Noise Ratio >50 dB, 1/2.8" or

better progressive Scan CMOS, True Day & Night, Integrated IR Source with effective

1.44 distance upto 50 meter, H.265 or better video compression, WDR 120dB or more, Triple Each 40.1.1 8048.00 2.00 16096.00 0.00

streaming, PoE (802.3af), IP67, ONVIF, BIS certified, 2MP @25/30fps @1080P (1920×1080)

with 2.8/3.6mm fixed lens, complete with all accessories, connections etc. as required.

Supplying, Installation, Testing and Commissioning of 4 Channel Network Video Recorder

(NVR) with embedded OS (Linux) along with camera licenses for 4 channels, having

H.265/H.264 video compression support, 1 SATA slot with 2TB surveillance grade Hard Disk

Drive (7200 RPM, SATA interface), 1 HDMI and 1 VGA video output, 1 RJ-45 10/100/1000

Mbps Ethernet port, 22” LED monitor for live view and playback display, USB backup

interface, Web & Mobile application support, ONVIF compatible, BIS/CE/FCC certified,

complete with all accessories, connections, testing and commissioning etc. as required.

Supplying, Installation, Testing and Commissioning of 4 port PoE switch (IEEE 802.3af/at),

CAT6 UTP cabling from cameras to NVR, RJ-45 connectors, cable termination, PVC

1.46 conduit/casing-capping, junction boxes, cable ties, patch cords and all other accessories LS MR 3351.00 1.00 0.00 3351.00

required for complete CCTV system, including making good the damages, painting etc.

complete as required.

ACCESS CONTROL SYSTEM

Supplying, Installation, Testing and Commissioning of Access Control System at both the

floors comprising of RFID Card & PIN Code based Reader with LCD Display, 10,000 card

storage, 1 lakh transaction logs, Communication protocols TCP/IP, Wiegand Out / IN, RS

485, User wise authentication modes, Built in Lock Control, Certification CE, FCC, RoHS,

BIS, suitable for mounting on metal surface/wall/wooden frames including all mounting

bracket & accessories, inclusive of Electromagnetic lock (fail safe type) for single leaf door

suitable for operation on 12 V DC having holding force 600 lbs with suitable feedback i/c L-

Bracket/Z-Bracket for mounting, Heavy Duty SS Finish Exit Push Button for releasing access

door, Door Position Sensor, 12V DC Power Supply with battery backup for EM lock, Hydraulic

Door Closer, RFID Cards (10 nos.), all necessary signal & power cabling, conduit,

connections, testing and commissioning etc. complete in all respects as required.

TOTAL AMOUNT (Including GST) 10,92,157.00 3,15,613.00

TOTAL AMOUNT (Including GST) 10,92,157.00 3,15,613.00

TOTAL AMOUNT (Including GST) 14,07,770.00

TOTAL AMOUNT (Including GST) 14,07,770.00

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 4: Electrical and allied works of office space at 3rd and 4th floor level.

Description Unit DSR/MR ref DSR Rate (in Rs.) MR Rate (in Rs.) Qty DSR Amount (in Rs.)

MR Amount (in Rs.)

4th floor level

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS /HFFR

PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with

1.01 modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm 1.3

FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without

independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single

1.02 core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm 1.54

FRLS/HFFR insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq.mm FRLS/HFFR PVC insulated copper conductor

single core cable in surface/ recessed steel conduit along with 1 No. 4 sq. mm FRLS/HFFR

insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

including connections but excluding modular plate etc. as required.

iii 3 pin 5/6 amp socket outlet Each 1.24.4 136.00 40.00 5440.00 0.00

iv 6 pin 15/16 amp socket outlet Each 1.24.5 219.00 5.00 1095.00 0.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

excluding modular plate as required.

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in

1.07 recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, Each MR 533.00 14.00 0.00 7462.00

"C" curve including connections, painting etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR

1.09 PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as 1.70

iii 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 1.7.3 476.00 30.00 14280.00 0.00

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 4: Electrical and allied works of office space at 3rd and 4th floor level.

Description Unit DSR/MR ref DSR Rate (in Rs.) MR Rate (in Rs.) Qty DSR Amount (in Rs.)

MR Amount (in Rs.)

4th floor level

Supplying and making end termination with brass compression gland and aluminium lugs for

1.10 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 11.1

KV grade as required.

Supply,laying, termination, testing and commissioning of following XPLE armourned 1.1 KV

grade conforming to I.S.7098/1554 Aluminium Conductor Cables :

Supply,laying, termination, testing and commissioning of following sizes of PVC sheathed

i PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade conforming to

IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

a 3.5 C x 120 Sqmm XLPE cable Metre MR 1078 3 0 3234

b 3.5 C x 95 Sqmm XLPE cable Metre MR 864 3 0 2592

c 3.5 C x 70 Sqmm XLPE cable Metre MR 680 5 0 3400

d 3.5 C x 50 Sqmm XLPE cable Metre MR 510 4 0 2040

e 3.5 C x 35 Sqmm XLPE cable Metre MR 378 4 0 1512

ii Supply,laying, termination, testing and commissioning of following sizes of copper cables -PVC

sheathed PVC/XLPE insulated Copper conductor armoured cable of 1.1 KV grade conforming

to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

a 4 C x 16 Sqmm XLPE copper cable Metre MR 1446 4 0 5784

b 4 C x 25 Sqmm XLPE copper cable Metre MR 2253 3 0 6759

c 3.5 C x 35 Sqmm XLPE copper cable Metre MR 2686 3 0 8058

d 3.5 C x 50 Sqmm XLPE copper cable Metre MR 3224 3 0 9672

Distribution Board

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

1.13 breaker suitable for inductive load of following poles in the existing MCB DB complete with 2.10

connections, testing and commissioning etc. as required.

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 4: Electrical and allied works of office space at 3rd and 4th floor level.

Description Unit DSR/MR ref DSR Rate (in Rs.) MR Rate (in Rs.) Qty DSR Amount (in Rs.)

MR Amount (in Rs.)

4th floor level

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing of 40 amps rating, four pole, 415 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual

current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing

MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board,

240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din

bar, interconnections, powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus

bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.

(But without MCB/ RCCB/ Isolator)

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN

MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A

1.19 tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without 2.50

MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3

phase outlets are required.)

Supplying and fixing following rating, 240 volts, "C" curve, miniattlre circuit breaker suitable for

1.20 lnductive loads of following poles in the existing MCB DB complete with connections, testing

and commissioning etc. as required.

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess

1.21 including painting in case of surface conduit, or cutting the wall and making good the same in 1.20

case of recessed conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.22 surface/ recess including cutting the wall and making good the same incase of recessed 1.21

conduit as required

Light Fixtures And Fan

Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current

(BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down

rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not

less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-

2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for

1.23 speed control and all remaining accessories including safety pin, nut bolts, washers, 9.2

temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230

V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external

connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable

and earthing etc. as required.

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 4: Electrical and allied works of office space at 3rd and 4th floor level.

Description Unit DSR/MR ref DSR Rate (in Rs.) MR Rate (in Rs.) Qty DSR Amount (in Rs.)

MR Amount (in Rs.)

4th floor level

1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) Each 9.2.3 2695 11 29645 0

Supplying and fixing two module stepped type electronic fan regulator on the existing modular

1.24 plate switch box including connections but excluding modular plate etc. as required. Each 1.25 402.00 11.00 4422.00 0.00

Providing and fixing 400 mm wall fan including wiring, earthing, mounting clamps and

connections complete

TELEPHONE AND TV

Supplying and drawing following pair 0.5 mm dia FRLS/HFFR PVC insulated annealed copper

1.26 conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as 1.18

Supplying and fixing following modular switch / socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

i Telephone socket outlet Each 1.24.6 168.00 32.00 5376.00 0.00

ii TV socket outlet Each 1.24.7 168.00 3.00 504.00 0.00

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with

1.28 suitable size of phenolic laminated sheet cover in front including painting etc. as required. 1.22

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

1.29 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Meter 1.19 54.00 120.00 6480.00 0.00

surface/recessed steel/ PVC conduit as required

Supplying, Installation, Testing and commissioning of CAT6A Copper Information Outlet (IO)

with face plate of color as per site requirement, should have ETL/UL verification program

1.30 certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be Each 39.15 302.00 32.00 9664.00 0.00

from same OEM to maintain compatibility and interoperability etc. complete as required.

Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG

Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair

should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D

1.31 standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature 39.17

Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force

: 11.5Kg etc. complete as required.

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at

the intersection of raceways supplied completely with base and cover plates, height adjustable

junction box 65- 90 mm including all accessories ss plate of 3mm thick complete in all respect

as per the directions of engineer in charge

FIRE ALARM SYSTEM

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with

1.34 rate of rise cum fixed temperature thermistor complete with base as required. Each 28.2.9 2866.00 8.00 22928.00 0.00

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 4: Electrical and allied works of office space at 3rd and 4th floor level.

Description Unit DSR/MR ref DSR Rate (in Rs.) MR Rate (in Rs.) Qty DSR Amount (in Rs.)

MR Amount (in Rs.)

4th floor level

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

1.35 copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath Mtr 28.5.2 192.00 175.00 33600.00 0.00

complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as 5 5125 0

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

1.37 existing surface / recessed steel conduit of following pairs, cores and size including connections 28.5.3

and interconnections etc. as required.

speaker cable Single pair, 2-core, 1.5 sqmm Mtr MR 60 325 0 19500

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and

accessories like coupler etc. as required.

Supply, installation, connecting, testing and commissioning of addressable photoelectric type

Smoke Detectors with mounting base, blinking LED etc. complete as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

providing masonry enclosure with cover plate having locking arrangement and watering pipe of

2.7 Meter long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

1.44 Supplying, Installation, Testing and Commissioning of 2 MP IP IR Dome Camera having

following specifications: Signal System PAL/NTSC, Signal to Noise Ratio >50 dB, 1/2.8" or

better progressive Scan CMOS, True Day & Night, Integrated IR Source with effective distance

upto 50 meter, H.265 or better video compression, WDR 120dB or more, Triple streaming, PoE Each 40.1.1 8048.00 2.00 16096.00 0.00

(802.3af), IP67, ONVIF, BIS certified, 2MP @25/30fps @1080P (1920×1080) with 2.8/3.6mm

fixed lens, complete with all accessories, connections etc. as required.

1.45 Supplying, Installation, Testing and Commissioning of 4 Channel Network Video Recorder

(NVR) with embedded OS (Linux) along with camera licenses for 4 channels, having

H.265/H.264 video compression support, 1 SATA slot with 2TB surveillance grade Hard Disk

Drive (7200 RPM, SATA interface), 1 HDMI and 1 VGA video output, 1 RJ-45 10/100/1000

Mbps Ethernet port, 22” LED monitor for live view and playback display, USB backup interface,

Web & Mobile application support, ONVIF compatible, BIS/CE/FCC certified, complete with all

accessories, connections, testing and commissioning etc. as required.

1.46 Supplying, Installation, Testing and Commissioning of 4 port PoE switch (IEEE 802.3af/at),

CAT6 UTP cabling from cameras to NVR, RJ-45 connectors, cable termination, PVC

conduit/casing-capping, junction boxes, cable ties, patch cords and all other accessories LS MR 3351.00 1.00 0.00 3351.00

required for complete CCTV system, including making good the damages, painting etc.

complete as required.

ACCESS CONTROL SYSTEM

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 4: Electrical and allied works of office space at 3rd and 4th floor level.

Description Unit DSR/MR ref DSR Rate (in Rs.) MR Rate (in Rs.) Qty DSR Amount (in Rs.)

MR Amount (in Rs.)

4th floor level

Supplying, Installation, Testing and Commissioning of Access Control System comprising of

RFID Card & PIN Code based Reader with LCD Display, 10,000 card storage, 1 lakh

transaction logs, Communication protocols TCP/IP, Wiegand Out / IN, RS 485, User wise

authentication modes, Built in Lock Control, Certification CE, FCC, RoHS, BIS, suitable for

mounting on metal surface/wall/wooden frames including all mounting bracket & accessories,

1.47 inclusive of Electromagnetic lock (fail safe type) for single leaf door suitable for operation on 12 Each MR 58555.00 1.00 0.00 58555.00

V DC having holding force 600 lbs with suitable feedback i/c L-Bracket/Z-Bracket for mounting,

Heavy Duty SS Finish Exit Push Button for releasing access door, Door Position Sensor, 12V

DC Power Supply with battery backup for EM lock, Hydraulic Door Closer, RFID Cards (10

nos.), all necessary signal & power cabling, conduit, connections, testing and commissioning

etc. complete in all respects as required.

Total Amount (Incl. GST) 10,92,157.00 3,67,613.00

Total Amount (Incl. GST) 10,92,157.00 3,67,613.00

Total Amount (Incl. GST) 14,59,770.00

Total Amount (Incl. GST) 14,59,770.00

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 4: Electrical and allied works of office space at 3rd and 4th floor level.

Rate Total Amount

Rate Total Amount

S.No. Description Unit DSR/MR ref Qty

Third floor level:

"Supply, Installation, Testing and Commissioning of COB-based recessed Low Height

downlight luminaire Amber, System power: 15W, Luminous flux of luminaire 1350lm,

Colour temperature of 4000K, Neutral White, CRI>90, MacAdam 3, T.H.D ≤ 10%, driver

efficiency ≥ 88%, surge protection of 2.5 kV, 230V constant current driver, 70% of

luminous flux after 50,000 operating hours; Energy-efficient COB, Direct light emission,

Luminaire housing in aluminium, Polyester powder White coloured coat applied over a

5-stage pre-treatment, anti-glare black reflector with 60 degree beam angle, UGR,19,

ZHLS (ZERO HALOGEN LOW SMOKE) wiring, Electronic control gear Protection class

II, IP 40, Ø = 93 mm, Ø(Cut Out) = 85 mm, H = 60 mm. "

Supply, Installation, Testing and Commissioning of Cove mounted LED strip (flexible),

with 60 LEDs per meter, 2835 SMD package with a thermal tape of high thermal

convection factor, system power: 6W/ meter, luminous flux 300 lm, colour temperature

of 4000 K, Neutral White, CRI > 80, 12 V DC, constant voltage driving circuit, Electronic

control gear, Protection Class II, IP20, THD<15%, Driver efficiency>88%, Surge

proetction of 2.5kV

Supply, Installation, Testing and Commissioning of Pendant luminaire with HPE (High

Performance Efficiency) LED (Light Emitting Diode) system power: 22 W, Luminous flux

of luminaire 2200 lm,Colour temperature of 4000 K, Neutral white, CRI > 90, SDCM 3,

230 V constant current driver, 70 % of luminous flux after 50,000 operating hours,

Energy efficient LEDs, Direct light emission, Luminaire profile in aluminium, Polyester

powder white coloured coat applied over a 5- stage pre-treatment, snap fit prismatic

diffuser for a homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE)

internal wiring, Electronic control gear, Sliding fixing wire suspension,

Protection class I, IP 40, MacAdam 3, T.H.D ≤ 10%, driver efficiency ≥ 88%, surge

protection of 2.5 kV.L=1175 mm, B = 52 mm, H = 64 mm, PL max = 1500 mm.

Supply, installation, testing, and commissioning (SITC) versatile high-performance

linear LED lighting system with W52mm x H75mm profile for modern architectural

environments, providing bold aesthetic presence and powerful uniform illumination.

Each 1200mm unit supplied as complete "plug-and-play" system including high-grade

4 aluminum housing, professional LED strip, and impact-resistant diffuser for seamless Nos MR 25 15000 3,75,000.00

continuous glow or equivalent. Includes all accessories, suspension/mounting

hardware, wiring connections up to fixture, custom joining for longer runs, and

painting/protection as required, complete in all respects as directed by the Engineer-in-

TOTAL AMOUNT (Incl. GST) 6,26,350.00

TOTAL AMOUNT (Incl. GST) 6,26,350.00

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 4: Electrical and allied works of office space at 3rd and 4th floor level.

S.No. Description Rate Amount ( Rs.)

Unit DSR/MR ref Qty

4th floor level:

"Supply, Installation, Testing and Commissioning of COB-based recessed Low Height

downlight luminaire Amber, System power: 15W, Luminous flux of luminaire 1350lm,

Colour temperature of 4000K, Neutral White, CRI>90, MacAdam 3, T.H.D ≤ 10%, driver

efficiency ≥ 88%, surge protection of 2.5 kV, 230V constant current driver, 70% of

luminous flux after 50,000 operating hours; Energy-efficient COB, Direct light emission,

Luminaire housing in aluminium, Polyester powder White coloured coat applied over a

5-stage pre-treatment, anti-glare black reflector with 60 degree beam angle, UGR,19,

ZHLS (ZERO HALOGEN LOW SMOKE) wiring, Electronic control gear Protection class

II, IP 40, Ø = 93 mm, Ø(Cut Out) = 85 mm, H = 60 mm. "

Supply, Installation, Testing and Commissioning of Cove mounted LED strip (flexible),

with 60 LEDs per meter, 2835 SMD package with a thermal tape of high thermal

convection factor, system power: 6W/ meter, luminous flux 300 lm, colour temperature

of 4000 K, Neutral White, CRI > 80, 12 V DC, constant voltage driving circuit, Electronic

control gear, Protection Class II, IP20, THD<15%, Driver efficiency>88%, Surge

proetction of 2.5kV

Supply, Installation, Testing and Commissioning of Pendant luminaire with HPE (High

Performance Efficiency) LED (Light Emitting Diode) system power: 22 W, Luminous flux

of luminaire 2200 lm,Colour temperature of 4000 K, Neutral white, CRI > 90, SDCM 3,

230 V constant current driver, 70 % of luminous flux after 50,000 operating hours,

Energy efficient LEDs, Direct light emission, Luminaire profile in aluminium, Polyester

powder white coloured coat applied over a 5- stage pre-treatment, snap fit prismatic

diffuser for a homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE)

internal wiring, Electronic control gear, Sliding fixing wire suspension,

Protection class I, IP 40, MacAdam 3, T.H.D ≤ 10%, driver efficiency ≥ 88%, surge

protection of 2.5 kV.

L=1175 mm, B = 52 mm, H = 64 mm, PL max = 1500 mm.

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 4: Electrical and allied works of office space at 3rd and 4th floor level.

S.No. Description Rate Amount ( Rs.)

Unit DSR/MR ref Qty

4th floor level:

Supply, installation, testing, and commissioning (SITC) versatile high-performance

linear LED lighting system with W52mm x H75mm profile for modern architectural

environments, providing bold aesthetic presence and powerful uniform illumination.

Each 1200mm unit supplied as complete "plug-and-play" system including high-grade

3 aluminum housing, professional LED strip, and impact-resistant diffuser for seamless nos MR 25 15000 3,75,000.00

continuous glow or equivalent. Includes all accessories, suspension/mounting

hardware, wiring connections up to fixture, custom joining for longer runs, and

painting/protection as required, complete in all respects as directed by the Engineer-in-

Total Amount (Incl. GST) 6,26,350.00

Total Amount (Incl. GST) 6,26,350.00

Digitally signed by AMIT

Name of work: Interior/Renovation works for existing office space at KVS HQ /Part 4: Electrical and allied works of office space at 3rd and 4th floor level.

S.No. Description Unit DSR/MR ref Qty. Rate (Rs.)

Supply, installation, testing and commissioning of 2 TR high wall split

1 type air conditioner complete with indoor unit, outdoor unit, cordless Nos. MR 8 58,000.00 4,64,000.00

Supply and laying of refrigerant copper piping with nitrile rubber

2 insulation (9mm thick) including fittings, clamps, supports and sleeves. Rmt. MR 128 1,350.00 1,72,800.00

Supply and Installation of Interconnecting electrical wiring between

3 indoor and outdoor unit using 4 core × 2.5 sq.mm FRLS copper cable, Rmt. MR 150 250.00 37,500.00

including control wiring where required.

Supply and fixing of UPVC condensate drain piping including fittings,

clamps and supports complete.

Supply and fixing of MS fabricated stand for outdoor AC unit with anti-

vibration rubber pads and anti-corrosive paint.

Supply and laying of power cable including 32 Amp DP MCB, 32 Amp

6 DP isolator switch, control wiring and earthing for AC units complete as LS MR 1 60,000.00 60,000.00

ancilary civil works /Chiseling Work including restoration as required.

Relocating of existing Casettee Ac in commissioner conference room

including all wires

Total(Incl. GST) 8,74,800.00

Digitally signed by AMIT