Erection of 110 KV DC Line on DC tower (2.10kM)by making LILO in the existing 110 KV Theni Sempatty II Feeder for the Proposed Jeyamangalam 110 kV SS with supply of all materials(Reach 1).

ABSTRACT

Schedule A (Civil and Erection works)

Schedule B (Supply of Materials)

Applicable GST Amount (Total GST Amount @18%)

Item Rate BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE A - Civil and Erection works (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Civil works

Clearing scrub jungle from the site as directed by the Engineer incharge at site including cost of all labour ,lead lift etc complete.

Conducting check survey marking of the pits for tower foundation as per the approved profile including measurements cutting of light and heavy jungels as may be required including cost of all T & ps, transport, labour, lead lift etc complete.

Earthwork excavation in hard stiff clay black cotton hard red earth shales murram gravel stoney earth and earth mixed with small size boulders and hard gravelly soil inlcuding all cost of lead lift etc complete.

Earthwork excavation in soft disintegrated rock or kankar not requiring blasting.

Earthwork excavation in medium rock and dense medium rock requiring blasting

Setting of stub and cleat,template including assembling of template setting of stub ,cleat and dismantling of template and shifting the template from loc to loc and reassembling including cost of template , all labour, T&P , lead, lift , fabrication charges etc complete.

KCR Tower

HCRTower

GCR Tower

PCC 1:3:6 using 20mm metal for foundation without formwork including cost of all materials lead lift etc complete.

PCC 1:12:4 using 20mm metal (machine crushed) for foundation footing , chimney with formwork including cost of all materials lead lift etc complete

RCC 1:1.5:3 using 20mm metal (machine crushed) for stub chimney, RCC ring for raised chimney including cost of all materials lead lift etc complete including cost of Chimney box , footing box etc.

Refilling with the excavated earth other than sand including watering consolidation in 150mm layers and forming platform with excess earth in the leg of the tower etc complete.

Providing pipe type earthing including necessary excavation for fixing 3m long 25mm dia GI "B" class pipe and refilling with excavated earth mixed with soft charcoal and connect the earthstrip with the leg of the stub including all cost of materials lead lift etc complete.

Erection of GI tower/tower extension parts ,square cross arm , DP structures with bolt & nuts including sorting out of tower parts as per the specification and punching of bolt & nuts, final checking and all other incidental charges for erection,including cost of all T&P,labour, lead, lift etc complete. as per approved drawing , BOM and specification. The rectification of defects found by operation staff during handing over of line to be done at free of cost.

Labour for hoisting of 90Kn Antifoc/Ord suspension insulators of 7 units with necessary hardware fittings including all cost of labout lead lift T & P etc complete

Labour for hoisting of 120 kn antifoc/Ord single tension insulators of 8 units with necessary hardware fittings including all cost of labour lead lift T & P etc complete

Providing temporary guys wherever necessary including excavation, burying out of anchor for staywire, tightening, dismantling the same after completion of works including cost of all materials,lead,lift,labour etc complete.

Lowering the HT/LT Line during stringing of power conductor and earthwire after restringing the same in original position including labour,lead ,lift etc complete.

Labour charges for stringing of 6Nos of ACSR Panther conductor including cost of loading & unloading transporting , sorting out of drums according to drum schedule providing trusseles ,paying out, jointing,rough sagging, tensioning, clipping, providing vibration dambers at tension locationsand all accessories including jumber connections, cost of T&P ,moving the drum to work spot all labour ,lead, lift, etc complete in all respects .

Single Span without LC

Continuous span without LC

PCC 1:2:4 using 20mm machine crushed metal for muffing and coping and plastering the same with CM 1:3, 12mm thick including all cost of shuttering charges lead lift labour materials etc complete

Painting with two coats of anticorrosive paint over tower leg at a height of 45cm including all cost of materials,labour, lead lift etc complete

Labour charges for fixing number plates, danger board, phase plate including all T&Ps, cost of lead lift labour etc complete

Labour charges for fixing name board including all T & Ps, cost of lead lift labour etc complete.

Providing full welding of all bolts and nuts in the erected towers from ground level to the cross arm bottom level in the tower including painting of bolts and nuts with two coats of best quality of cold galvanised paint having atleast 90% zinc content and approved by the Engineer at site including cost of paint and all other materials hire charges for diesel generator and welding transformer all labour transport charges etc complete.

Removal of surplus earth in a low lying area to a average distance of 200m by head load.

Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting, bending tying and fixing in position as per specification including cost of all materials, labour, lead, lift, tools and plants etc., complete

Item Rate BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE B Supply of Materials (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Supply of Materials

Supply of GI tower/extension parts/DP structures/ X arm including stub & cleat in accordance with boards design as per approved drawing and BOM as detailed in this specification including cost of all materials ,labour, transport,lead, lift etc complete .

MS Tower parts.

Supplying of hot dip Galvanising & bolt & nuts,stepbolt with various sizes of required length,Spring Washers as per relevant latest IS Specification including cost of Transport charges and all lead,lift,etc, complete as as per approved drawing and BOM as detailed in this specification

Supply of Hardware fittings , tower accessories as per IS and technical specification including transport charge etc complete suitable for panther conductor.

Single Tension fitting for Panther

Single Suspension fitting for panther

Vibration Damper for Panther

16 mm dia U bolt

16 mm dia D shackle

phase plate

Number plate

Danger Board

Name Board (0.45*0.90)-14 Gauge GI sheet

Midspanjoint for Panther

Repair sleeve for Panther

PA Rod for panther

90KN ordinary disc insulator as per IS and technical specification including transport charge etc complete

120 KN ordinary disc insulator as per IS and technical specification including transport charge etc complete

ACSR Panther Conductor as per IS and technical specification including transport charge etc complete

Please Enable Macros to View BoQ information