Construction of Permanent building for District Fire Office and Fire and Rescue service station cum garage at Cuddalore in Cuddalore District.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

25 : M.S.Holdfast

31 : Weathering course

37.1 : White washing 3 coats (slaked)

39 : M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.4 : Providing Tree guard

52.1 : Supplying and fixing of 20mm dia "B" Class GI pipe for Hot water line (Fully Concealed in walls)

55.2 : Flat Back Urinal

Electrical arrangements 72 : Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

77.3 : S&F of TV/Telephone line Socket

77.4 : S&F of 20mm dia PVC pipe for TV/Telephone line

78 : Earthing Station IS3043 (Type I)

86 : Anti termite treatment

238 : Anticorrosive treatment for steel grills

ANNEXURE-I 2.1.1 : Supplying and filling Gravel

2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

6.5.1 : Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand)

8.3.1.1 : Standardised concrete Mix M30 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Ground Floor

c) In First Floor.

d) In Second Floor.

e) In Third Floor.

9.5.1 : Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

10.5.1 : Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") 110 mm tk (B.P.) (using crushed stone sand) b. In Ground Floor

c. In First Floor

d. In Second Floor

e. In Third Floor

11.5.1 : Brick Partition work in C.M. 1:4 Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") 70 mm tk (B.P.) (using crushed stone sand) a. In Ground floor

b. In First floor

c. In Second floor

12.1.1 : Brick partition work in C.M. 1:4 using country bricks of size 22 x11x5cm 50 mm thick (using crushed stone sand) a. In Ground floor

b. In First floor

c. In Second floor

d. In Third floor

15.1.1: Cuddappa slab 20 mm tk.for C/B slab. (using crushed stone sand) a. In Ground Floor

b. In First floor

c. In Second floor

15.2.1: Cuddappa slab 40 mm tk.for C/B slab. (using crushed stone sand) a. In Ground Floor

b. In First floor

c. In Second floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.For Vertical wall

g.Double centring portico area

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

21.5.2.1: Supplying and fixing of solid core flush door shutter of Tk 35mm a) Door size 1800mm x 2400mm (Double Leaf)

c) Door size 1200mm x 2400mm (Double Leaf)

21.5.5.1: Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 1000mm x 2400mm (Single Leaf)

b) Door size 900mm x 2400mm (Single Leaf)

22.1.1 : TW Double leaves panelled door shutter (Aluminium fittings with brass screws) a. 1500 x 2400mm.

22.3.3 : T.W. frame & T.W styles & rails with BWR double leaf shutters for Cup board/ward robes including two coat enamel paint & one coat primer.

22.3.3.1 : Providing T.W double leaf shutters for Cupboard/ward robes with 9mm tk Phenol bonded BWR grade plywood For size 5.13m x 2.10m

22.3.3.2 : Providing T.W double leaf shutter s for Cupboard/ ward robes with 9mm tk Phenol bonded BWR grade plywood For size 3.80m x 2.10m

23.2.1 : Supply and fixing 5.5mm thick plain sheet glass with T.W beedings

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) including plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

31.2.1 : Finshing the top of Terrace floor with one course of solar reflective Ceramic tiles with base concrete

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) including plasticizer

35.1.1 : Plastering in CM 1:3, 12mm with WPC (using crushed stone sand) including plasticizer

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) including plasticizer

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.6 : One coat white cement for new walls and other similar works.

38.7 : Plastic Emulsion PAINT including primer for outer walls

43.1.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.(using PVC insulated binding wire)

44.2.1.1 : Rain water harvesting using defunct borewell and providing perforated cover slab (M30) a). Providing pit

b) Augering 30cm dia

44.6.1 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe (UPVC special clamp)

50.3.1 : Supply and planting avenue trees (using crushed stone sand)

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

52.1.1 : PVC Water supply (ASTM) with UPVC Specials a. 32 mm dia

b. 25 mm dia

52.4.1 : 20mm dia PVC water supply ASTM pipe with UPVC Specials (fully consealed in walls)

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

56.4.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F.(using crushed stone sand)

57.1.2 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4 : Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

59.5.1 : Gully Trap using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 b. 160 mm UPVC Non Pressure pipe

64.1.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (using PVC Box, Fire retardant Box) a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point. (using PVC Box, Fire retardant Box)

66.1.1: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point. (using PVC Box, Fire retardant Box)

67.1.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself. (using PVC Box, Fire retardant Box)

68.2.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places. (using PVC Box, Fire retardant Box)

69.1.1: 15 Amp. Power plug (using PVC Box, Fire retardant Box)

71.2 : Supplying and fixing of 100 AMPS Triple pole main switch.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.2.1 : S & F of 20 amps DP plug & Socket in sheet enclosure with 32 A DP MCB in flush wall with earth connection(For AC Plug)(Legrand (MDS)/Hager (L&T) equalivalent /superior variety

77.5 : Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.8 : Run of 4 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

90.1: Providing additional strutting to centering of plain surface

98.3.2 : TW Panelled door shutter with brass fittings (Double leaf) b. 1200mm x 2400mm.

98.5.4.1: TW Panelled door shutter with brass fittings (Double leaf) a. 1500mm x 2085mm.

98.5.4.2: TW Panelled door shutter with brass fittings (Double leaf) a. 1500mm x 2400mm.

112.1 : S&F of 225 mm dia sweep AC exhaust fan

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.1 : Concrete designer tiles flooring (using crushed stone sand)

361.5.1: Vitrified Tiles flooring (ivory) (using crushed stone sand)

367: Providing wooden (melamine) polish for new wood

379.4.2.1: S&F of Granite slab of size 4'x2', 18 to 20mm thick (Synthetic Grey, Paradise and similar varieties) (Super fine polished with machine cut edges) (using crushed stone sand)

799 : Two coats of OBD over one coat white cement for inner walls

828.1 : Supplying and Laying of Hard core layer of 200mm consolidated thickness

ANNEXURE-II: A1: Supplying and fixing in position of UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) for all sizes

A3: Supplying and fixing of 1 No. three phase double door distribution board (For power circuit) with 6 way TPDB with 20 Nos. of MCB, 63A FP isolator - 1 No.

A4: Supplying and fixing of 1 No three phase double door distribution board (For light) with 4 way TPDB with 12 Nos. of MCB, 32A FP isolator - 1 No.

A5: Supply and fixing of Stainless Steel Health Faucet approved quality with ISI mark including cost of all materials and labour charges etc. all complete and as directed by the departmental officers.

A6: Supplying and fixing of SFRC Manhole Cover slab Size 60x60cm including of all cost etc.,

A7: Supplying and fixing of LED blubs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

b) 12 watts LED bulb for bulk head fittings

A8: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A9: Supply and fixing of LED Bulk head fitting for 12W LED Bulb

A10: Supplying and fixing of 25W LED Street light with necessary fittings (Superior variety) Charges for fixing 25W LED lamp street light fittings

A11: Supply, Erection and Commissioning of 1No of Passengers lift (13 Persons - 884 Kgs.) at site according to the standard specification (Gearless lift with machine room)

BHARATH BUILDING CONSTRUCTION

J C ENGINEERING CONSTRUCTION COMPANY

Johnsun Engineering Contractors