Providing Pipeline HHCs under 20KL OHSR and drilling of Borewell with Pumpset at Lingapur

Supply and Delivery of 75mm dia 6kgf/cm2 PVC Pipes including all taxes and transportation to site etc., complete.

E/w excavation in loamy, clayey soils like B.C soils red earth and ordinary gravels for pipe line trenches of size (0.70x1) and depositing on banks with an initial lead of 10m and lift of 2m including lowering,laying,jointing of pvc pipes into the readymade trenches and true to the alignment and gradient,refilling thetrenches with excavated earth etc., complete.

Supply and delivery and DI D/F Gate valves ( soft Seated ) valves conforming to IS 3896-oart 2-1985 wedge fully rubber lined with EPDM food grade quality and the valve should be of vacuum tight and 100% leak proof with face to face dimensions. All the valves should be with Electrostatic powder caoting both insisde and outside pockets body passages.Drilled as per IS: 1538

Supply and delivery and DI D/F Gate valves ( soft Seated ) valves conforming to IS 3896-oart 2-1985 wedge fully rubber lined with EPDM food grade quality and the valve should be of vacuum tight and 100% leak proof with face to face dimensions. All the valves should be with Electrostatic powder caoting both insisde and outside pockets body passages.Drilled as per IS: 1538

Fixing of DI D/F Gate valves ( soft Seated ) by Jointing DI Specials to suit the pressure class of pipe and constuction of RCC valve chambers as per requirement with VRCC side walls,slab and RCC manhole cover with locking arrangements including cost conveyence of all materials for construction of valve chamber and Jointing materials, and labour charges etc. complete for finished item of work but excluding cost of DI D/F Gate valves(soft Seated) its CED, as specified in Technical specifications.but including seignoarge charges ,cost of specials & Contractors profit but excluding VAT, labour cess , NAC income tax , QC etc 80mm dia on 75mm

Fixing of DI D/F Gate valves ( soft Seated ) by Jointing DI Specials to suit the pressure class of pipe and constuction of RCC valve chambers as per requirement with VRCC side walls,slab and RCC manhole cover with locking arrangements including cost conveyence of all materials for construction of valve chamber and Jointing materials, and labour charges etc. complete for finished item of work but excluding cost of DI D/F Gate valves(soft Seated) its CED, as specified in Technical specifications.but including seignoarge charges ,cost of specials & Contractors profit but excluding VAT, labour cess , NAC income tax , QC etc 80mm dia on 75mm

Supply and delivery of 15mm dia House service connection as per standard specification including the cost of the materials like Clamp Saddle/ Electro fusion Saddle confirming to prEN 12201-3, Manufactured from virgin resin of PE-SO/PE-100 with FLOW CONTROL VALVE (5 LPM @5m head), Compression Elbows, MDPE PESO Blue Pipe & Supplying and and including cost of 15mm dia meter brass body CP finish bib tap of BIS standard etc including GI verticals complete for finished item of work

Fixing of Saddles, FCV's, GI Pipe, Bib Taps and MDPE including lowering, laying and jointing including earth work excavation and refilling the pipe line trench after laying the pipe line

Supply and placing of the Nominal MIX using 20mm size for construction of CC blocks including cost and conveyance of all materials like cement, for M-20 grade

Drilling of borewell by down the hole hammer (DTH) drilling to the finished diameter of 163 mm (6 1/2") in all formations to the depth as specified and reaming the bore to the required dia, flusing the bore walls at an average pressure of 7 kg/Sqcm (100 PSI), conducting yield test, inclusive of transportation from point to point, crew charges, consumables, shifting of ring and all other charges etc., complete. The borewell should be true & Vertical and work should be carried out to the amendments if any from time to time.

Supply & Fixing of 180mm dia 8Kg/cm2 UPVC Casing pipes for borewells for potable water supply conforming to IS 12818-1992 as amended from time to time including transportation, QC inspection etc complete

Manufacture, Supply, delivery of submersible Pumpset suitable to 150mm dia Borewells coupled with motor Three phase 2880 RPM 340V(-15%+10% range-290 to 375 Volts) of reputed make with minimum overall efficiency of 40% at the duty point with Radial including cost and conveyance of material, all taxes surcharges, Sale tax, Exice duty, TOT, Over head charges & Transporting charges etc., The Pumpset should confirm to IS 8034:1989 and Motor should confirm to IS 9283:1979 with ISI/ISO 2000 mark with a guarantee period of 18 months from the date of installation. 5.00HP 12-16 Staging Three face submmersible pumpset rate as per approved. Makes : Texmo / CRI / KSB / Aryan Varsha / Lubi

Supply and Transportation of control panel for three phase submersible motors up to 5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor, suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.

S/D of 50mm dia SS Nipple

Supply and delivery of PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade up to 1100 Volts as per IS: 694:1990 including all transportation charges etc complete.3 Core 2.5Sq.mm Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard

Supply & Delivery of 60/50mm dia uPVC Pipes including all taxes & duties etc. complete.

S/D of 50mm Clampset & Nut bolts

S/D of 50mm dia Non Return Valve

Supply and Deliver of 7/20 single core service wire

Supply and fixing of Bore Cap

Installation, Erection & commissioning of Submersible pumpset