EXECUTION OF FLOORING WORK(GRANITE, TILE WORK,CC FLOORING,VDF FLOORING WORK),STRUCTURAL STEEL WORK,CHAIN LINK FENCING,LAMINATED PANEL BOARD WORK FOR 8 ELEVATED STATIONS(continue)..

"NOTE:- THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC BUT EXCLUDING GST."

Please Enable Macros to View BoQ information

Percentage BoQ At Par

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Structural Steel Work

Providing, fabricating to required profile and shape, transporting, erecting and fixing in position at all levels of structural steel work conforming to 'IS 2062 Grade E250 or higher grade including procurement & testing of all raw steel materials, HSFG bolts, all types of nuts and bolts as required (Confirming to IS 3757:1985 (Reaffirmed:2008)&IS 4000:1992 (Code of practice for high strength bolts in steel structures) & washer, fasteners, fabrication, joining, welding (confirming to IS: 816:1969 and IS 9595:1996), threading, sleeves etc., including allowance for all types of wastage, straightening, cutting, bending of section wherever specified, drilling holes, bolting provision of necessary tools, testing etc. complete. Structural steel work for suspenders for false ceiling, gratings, frames, trusses, chequered plate covers, cable ducts / cable tray, guard bar, ladder, railings, brackets, gates and similar works. The rate shall also include required surface preparation (Sand/abrasive Blasting as per ISO:8501-1:1988) including application of Zinc Epilux or equivalent primers, and two coats of Poly siloxane paint as per specifications. The rate shall also include supplying and providing of detailed fabrication drawings based on the GFC drawings, required for all permanent and temporary structures and their approval from Engineer, prior to execution. The rate shall also include provision and installation of base plate, anchor bolts ( for payment measured in tonnes) etc. all as per relevant drawings, specifications and directions of engineer using standard plate sections, rolled sections, like angles, channels, I sections, T sections, C sections, H sections and Light gauge steel sections confirming to IS:811-1987 (Specification for cold formed light gauge structural steel sections),hollow square/rectangle sections (Confirming to IS:4923-1997 (reaffirmed 2009) Hollow steel sections for structural use- specification), hollow round sections confirming to IS 1161:2014 (Steel tubes for structural purposes -Specification) etc., welded and built.

Note: 1. Stage Payment against receipt of Materials at Site will be made as under: a) 70% of the accepted rate (not the value) of the item of BOQ or 90% of the material invoice value whichever is lesser upon receipt of materials at site / yard. b) Balance value of the item will be paid in IPCs upon work completion of the Item.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer- in-charge. (Made of G.I. wire of dia 4mm). Note: Steel section shall be paid separately in relevant item of BOQ.

Providing and fixing 6mm thick Suede Finish Exterior Grade High Pressure Compact Laminates having 1300mm x 3050mm board size made out of urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers along with UV protection film on both side finish surfaces. Panels should confirm to European Fire Rating norms of Bs1d0 when classified in accordance with EN 13501-1: 2007, the Fire-Retardant Additive must be Halogen free in order to protect environment. It should have Antibacterial and Antifungal properties (conforming to JIS Z2801:2010 and ASTM G21-2015 standards respectively). Panels should have density >1350 kg/m3, Anti-graffiti properties and Resistant to - climatic shock, UV light, Grey Scale contrast (1500 hours of exposure-rating-4), Artificial weathering (including light fastness) with a Grey Scale Rating not worse than 4 after exposure to 650 MJ/m2, Acid Rain, Corrosion (on a salt spray test for 700 hours) as per applicable specifications conforming to latest and applicable EN 438-6: 2016 EDF Grade quality standards. It should be CE certified for consistency of performance described by in Annexure ZA of the standard EN 438-7:2005 under system-1. The product to be warrantied against manufacturing defects and performance characteristics (as per manufacturer product warranty) for a period of 12 years from the date of billing from factory. Panels should be installed on Aluminium tubular substructure in the size of 50mm x 25mm x 1.8mm or as per site requirement at 450 mm c/c distance with the help of 5mm diameter colour matching rivets as per manufacturer specification. The aluminium tubular substructure should be fixed on wall/MS Structures with the help of brackets designed to take dead load and wind load by 10mm fastener. Maintain 6mm both horizontal and vertical gap between two installed panels. Shade/design should be finalized under direction of Engineer. The rate includes cost of all materials, labour, transportation, staging, T&P, machineries, consumables etc. complete except the cost of supporting MS frame works if any required which shall be paid separately.

Schedule C: Flooring works

Providing and laying flooring, screed concrete with M-20 grade with cement concrete, cement content as per approved design mix using 20mm downsize aggregate. Cleaning of floor, providing slurry, placing of concrete, compaction with surface vibrators, floating and trowelling, laying the surface to slope, all incidental work etc. complete. Rate includes cost of all materials (including wastages) labour, curing, hire charges of machineries, with all leads & lift at all levels complete as per specifications & drawings.

Providing and laying flooring with M-30 grade with cement concrete, cement content as per approved design mix using 20mm downsize aggregate. Cleaning of floor, providing slurry, placing of concrete,compaction with surface vibrators, floating and trowelling, laying the surface to slope, all incidental work etc. complete. Rate includes cost of all materials (including wastages), labour, curing, hire charges of machineries, with all leads & lift at all levels complete as per specifications & drawings.

Vacuum De-Watering System treatment including fixing of the channels / side form and setting them to the required level, 12/25 mm thick expanded polystyrene for expansion / isolation joints to the full thickness of the concrete, dewatering the surplus water using filter pads & vacuum pumps, floating with a disc, power trowelling with blades including all incidental work etc., complete. The VDS equipment shall be of TREMIX / AQUARIOUS TECH. or equivalent, the channel shall have holes of dia. and intervals specified by Engineer and perpendicular at the edges. Rate includes cost of all materials (including wastages), labour, hire charges of machineries, with all leads & lift at all levels complete as per specifications.

Providing and fixing Aluminium Strips 40mm wide and 1.5mm thick painted with a protective coat of bitumen for joints of concrete floors, including cost of materials, labour, curing, complete as per specifications.

Providing and laying 50 mm thick 600 mm wide and minimum 1200mm long grey/ cherry red/ elite brown / any other matching with platform granite colour of uniform shade and texture, flame finish granite stone (colour of granite as approved by Engineer) with edge finishing as required at the edge of platform, all laid over base cement mortar 1:4, upto 30mm thick with white cement slurry mixed with colour pigment to match shade of granite. Rate includes nosing/ edge finishing, cost of all materials (including wastages), dry matching, curing, labour, hire charges of machineries, with all leads & lift at all levels complete as per specifications. Note: 1. Stage Payment against receipt of Materials at Site will be made as under: a) 70% of the accepted rate (not the value) of the item of BOQ or 90% of the material invoice value whichever is lesser upon receipt of materials at site / yard. b) Balance value of the item will be paid in IPCs upon work completion of the item.

ἁ鐀ᴁ鬀ἁ鰀ᴁ鸀ἁ鼀ᴁꐀἁꔀᴁꨀἁ꬀ᴁ관ἁ글ᴁ똀ἁ뜀ᴁ묀ἁ밀ᴁ쐀ἁ씀ᴁ찀ἁ촀ᴁ턀ἁ툀ᴁἁᴁἁᴁἁᴁἁᴁἁᴁﴀἁ︀ᴁࠀἂऀᴂఀἂഀᴂᘀἂᜀᴂḀἂἀᴂ☀ἂ✀ᴂ⬀ἂⰀᴂ㌀ἂ㐀ᴂ㘀ἂ㜀ᴂ䌀ἂ䐀ᴂ䰀ἂ䴀ᴂ刀ἂ匀ᴂ吀ἂ唀ᴂ夀ἂ娀ᴂ尀ἂ崀ᴂ怀ἂ愀ᴂ最ἂ栀ᴂ瀀ἂ焀ᴂ猀ἂ琀ᴂ眀ἂ砀ᴂ蜀ἂ褀ᴂ踀ἂ輀ᴂ鄀ἂ鈀ᴂ鼀ἂꀀᴂ꜀ἂꠀᴂ꼀ἂ뀀ᴂ눀ἂ대ᴂ밀ἂ봀ᴂ뼀ἂ쀀ᴂ쐀ἂ씀ᴂ준ἂ쨀ᴂ찀ἂ촀ᴂ턀ἂ툀ᴂ퐀ἂ픀ᴂἂᴂἂᴂἂᴂἂᴂἂᴂﰀἂﴀᴂἃĀᴃ܀ἃࠀᴃ਀ἃ଀ᴃ฀ἃༀᴃጀἃ᐀ᴃᘀἃᜀᴃᨀἃᬀᴃᴀἃḀᴃ℀ἃ∀ᴃ␀ἃ─ᴃ⠀ἃ⤀ᴃ㄀ἃ㈀ᴃ㤀ἃ㰀ᴃ䄀ἃ䈀ᴃ䬀ἃ䰀ᴃ一ἃ伀ᴃ唀ἃ嘀ᴃ娀ἃ嬀ᴃ戀ἃ挀ᴃ攀ἃ昀ᴃ漀ἃ瀀ᴃ爀ἃ猀ᴃ礀ἃ笀ᴃ耀ἃ茀ᴃ蔀ἃ蜀ᴃ踀ἃ退ᴃ销ἃ需ᴃ餀ἃ鬀ᴃ鸀ἃꀀᴃꐀἃꘀᴃꨀἃ가ᴃ글ἃ뀀ᴃ됀ἃ똀ᴃ렀ἃ먀ᴃ븀ἃ쀀ᴃ쐀ἃ였ᴃ픀ἃ혀ᴃἃᴃἃᴃࠄƜ牐癯摩湩⁧湡⁤慬楹杮㈠洵桴

ἁ䰀ᴁ儀ἁ刀ᴁ圀ἁ堀ᴁ娀ἁ嬀ᴁ戀ἁ挀ᴁ最ἁ栀ᴁ焀ἁ爀ᴁ砀ἁ礀ᴁ簀ἁ紀ᴁ缀ἁ耀ᴁ蠀ἁ褀ᴁ退ἁ鄀ᴁ鐀ἁ销ᴁ鴀ἁ鸀ᴁꄀἁꈀᴁꨀἁ꬀ᴁ됀ἁ딀ᴁ렀ἁ뤀ᴁ봀ἁ븀ᴁ쀀ἁ섀ᴁ쐀ἁ씀ᴁ케ἁ퀀ᴁ혀ἁ휀ᴁἁᴁἁᴁἁᴁἁᴁἁᴁἁᴁഀἂ฀ᴂကἂᄀᴂᘀἂᜀᴂḀἂἀᴂ☀ἂ✀ᴂ⸀ἂ⼀ᴂ㄀ἂ㈀ᴂ㬀ἂ㰀ᴂ㸀ἂ㼀ᴂ䌀ἂ䐀ᴂ䠀ἂ䤀ᴂ䬀ἂ䰀ᴂ倀ἂ儀ᴂ匀ἂ吀ᴂ崀ἂ帀ᴂ愀ἂ戀ᴂ搀ἂ攀ᴂ栀ἂ椀ᴂ焀ἂ爀ᴂ瘀ἂ眀ᴂ笀ἂ簀ᴂ缀ἂ耀ᴂ蘀ἂ蜀ᴂ褀ἂ言ᴂ贀ἂ踀ᴂ鈀ἂ錀ᴂ销ἂ阀ᴂ餀ἂ騀ᴂ鰀ἂ鴀ᴂꀀἂꄀᴂ꜀ἂꠀᴂ뀀ἂ넀ᴂ렀ἂ뤀ᴂ븀ἂ뼀ᴂ저ἂ준ᴂ쬀ἂ찀ᴂ툀ἂ팀ᴂ휀ἂᴂἂᴂἂᴂἂᴂἂᴂἂᴂἂᴂ＀ἂᴃ܀ἃࠀᴃഀἃ฀ᴃကἃᄀᴃ᐀ἃᔀᴃᤀἃᨀᴃḀἃἀᴃ℀ἃ∀ᴃ☀ἃ✀ᴃ⤀

ἃﰀᴃ︀ἃ＀ᴃሀἄጀᴄ᠀ἄᤀᴄἀἄ ᴄ─ἄ☀ᴄ⨀ἄ⬀ᴄⴀἄ⸀ᴄ㔀ἄ㘀ᴄ䀀ἄ䄀ᴄ䘀ἄ䜀ᴄ伀ἄ倀ᴄ吀ἄ唀ᴄ圀ἄ堀ᴄ开ἄ怀ᴄ攀ἄ昀ᴄ洀ἄ渀ᴄ甀ἄ瘀ᴄ紀ἄ縀ᴄ耀ἄ脀ᴄ言ἄ謀ᴄ贀ἄ踀ᴄ鈀ἄ錀ᴄ需ἄ頀ᴄ騀ἄ鬀ᴄ鼀ἄꀀᴄꈀἄꌀᴄ가ἄ관ᴄ뀀ἄ넀ᴄ대ἄ됀ᴄ뜀ἄ렀ᴄ쀀ἄ섀ᴄ씀ἄ였ᴄ쨀ἄ쬀ᴄ츀ἄ케ᴄ픀ἄ혀ᴄἄᴄἄᴄἄᴄἄᴄἄᴄἄᴄἄᴄἄᴄ＀ἄᴅ܀ἅࠀᴅഀἅ฀ᴅᜀἅ᠀ᴅᨀἅᬀᴅ℀ἅ∀ᴅ☀ἅ✀ᴅ⸀ἅ⼀ᴅ㄀ἅ㈀ᴅ㬀ἅ㰀ᴅ㸀ἅ㼀ᴅ䌀ἅ䐀ᴅ䔀ἅ䘀ᴅ一ἅ伀ᴅ嘀ἅ圀ᴅ尀ἅ崀ᴅ开ἅ怀ᴅ挀ἅ搀ᴅ栀ἅ椀ᴅ洀ἅ渀ᴅ瀀ἅ焀ᴅ甀ἅ瘀ᴅ砀ἅ礀ᴅ紀ἅ縀ᴅ舀ἅ茀ᴅ蜀ἅ蠀ᴅ鈀ἅ錀ᴅ销ἅ阀ᴅ餀ἅ騀ᴅ퀀ࠁŽ牐癯摩湩⁧湡⁤楦楸杮猠慴湩敬獳猠整汥挠慬灭⁳景爠煥極敲⁤楳敺‬灳捥晩捩瑡潩湡⁤桳灡⁥湩删䍃⼠䍃⼠䈠楲正眠牯⽫䄠䍁戠潬正眠牯慢正湩⁧楷桴挠浥湥⁴潭瑲牡ㄠ㈺⠠‱散敭瑮›′楦敮猠湡⥤椠据畬楤杮搠楲汬湩⁧敮散獳牡⁹潨敬椠瑳湯獥愠摮攠扭摥楤杮琠敨挠慲灭椠桴⁥潨敬⠠慦瑳湥牥琠敢瀠楡⁤敳慰慲整⸩删瑡⁥椠据畬敤⁳挠獯⁴漠⁦愠汬†慭整楲污⁳⠠湩汣摵湩⁧眠獡慴敧⥳‬氠扡畯Ⱳ†楨敲挠慨杲獥漠⁦慭档湩牥敩ⱳ眠瑩⁨污敬摡⁳…楬瑦愠⁴污敬敶獬挠浯汰瑥⁥獡瀠牥猠数楣楦慣楴湯⹳   $%+,./78=>KLOPUVXY\]`abchinorsxy}~ †Š‹‘’˜™œŸ §¨©ª®¯´µ¾¿ÇÈÑÒÖ×àáäåîïòóøùûüÿĀĄąĎďđĒĔĕęĚĤĥĩīijĵĹĻĽĿłńōŏřśťŧŮŰżŽſƀƌƍƑƒƕƖƛƜƝƞƢƣƥƦƩƪưƱƹƺƼƽǀǁŶ紈倀潲楶楤杮愠摮氠祡湩⁧敹汬睯挠汯畯敲⁤楖牴晩敩⁤楴敬⁳景㘠〰ㅘ〰洠楷桴琠楨正敮獳ㄠⴱ㈱洠楷桴眠瑡牥愠獢牯瑰潩敬獳琠慨⸰㠰┠愠摮挠湯潦浲湩⁧潴䤠匮‮㔱㈶ⰲ漠⁦灡牰癯摥洠歡ⱥ漠敶⁲㈱洠桴捩敢⁤景挠浥湥⁴潭瑲牡ㄠ㌺⠠‱散敭瑮›″潣牡敳猠湡⥤‬潪湩楴杮眠瑩⁨牧祥挠浥湥⁴汳牵祲䀠㌠㌮欠⽧洠′湩汣摵湩⁧牧畯楴杮琠敨樠楯瑮眠瑩⁨桷瑩⁥散敭瑮☠洠瑡档湩⁧楰浧湥獴攠捴‮潣灭敬整.ᴀऀἀ਀ᴀഀἀ฀ᴀ᐀

"NOTE:- THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC BUT EXCLUDING GST."