Construction of kerb wall and storm water drain at Western side of FHA truck entry area in KARP Complex

Amount

Conveying the surplus excavated earth & debris boulders and spoil by mechanical means and depositing at place inside DAE installation identified as dumping yard as per requirement with a lead specified below including loading, unloading, breaking clods, levelling all complete as per specification and as directed by the Engineering-in-charge. Note: 1) The rates in respect of this item are applicable for the NET quantities arrived at after making deductions for voids @20% in respect of soil and 50% in respect of Rock from the corresponding stack / truck measurements 2) The earth shall be dammed well inside the damping yard not over approach pathway road. Lead charges for lead Exceeding 50m but not exceeding 3Kilometer.

Providing & laying of PCC 1:2:4 using 25mm maximum size graded aggregates including mechanical mixing , transporting, and placing in required position, ramming, compaction, levelling, curing, shuttering, dewatering if any, complete all as per specification for levelling courses in foundation for walls footing floor, drains etc., encasing pipes and other required works directed by Engineer-in-Charge complete all as per specifications.

Proving and construction brick masonry at all lifts using well burnt stock bricks in cement mortar 1:6 including scaffolding, raking out joints, curing complete as per specification and drawings for foundation, superstructure, etc for the following floors. For Basement and Ground Floor

Proving and construction brick masonry at all lifts 115mm thick brick work in cement mortar 1:4 using well burnt stock bricks including scaffolding, raking out joints on both faces etc., complete as per specification and directed by the Engineer-In-Charge. For Basement and Ground Floor

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete in all respects as per clause 406 of MoRT & H Specifications for road and bridge works ( 4th Revision ) and as directed by the Engineer -in - Charge.

Providing straightening, decoiling wherever necessary bending, cutting, binding and fixing in position steel reinforcement TMT bars of Fe500D grade steel confirming to IS:1786 'SAIL or VIZAG or approved equivalent make ' and tying with approved annealed binding wire of 1.6mm dia in all reinforced cement concrete work at all lifts, including cost of supplying fixing the spacer/cover blocks in cement mortar 1:2 and binding wire complete all as per specification and as directed by Engineer-in-charge at all lifts .

Manufacturing, supplying, hoisting and fixing in position at all lifts, precast unit of various patterns and sizes for precast plain solid unit, exhaust fan moulds, slabs, etc., in controlled reinforced cement concrete of M30 grade using 20mm and below machine crushed graded stone aggregate with 380Kg of cement per Cu.m concrete including weigh batching, mechanical mixing, casting, vibrating, finishing of exposed faces, curing, necessary formwork, moulds, transporting and placing at all lifts, preparation of connections, grouting with cement mortar/cement grout wherever needed excluding steel reinforcement complete all as per drawing, specification and as directed by Engineer..

Providing plastering to the internal surface of brickwork/concrete at all elevation in cement mortar 1:5, 12mm thick finished with a floating coat of neat cement including hacking of concrete surface with pointed tool, scaffolding, finishing, curing, forming grooves where ever necessary, all as per specifications.

S KOTHANDAPANI CONTRACTOR

K.S.MURUGAN