8191 WELCOME MAINTENACE FOR MD ACCN AND CERTAIN B AND R REPAIRS LIKE REPLACEMENT OF WIREMESH CURTAIN RODS GLASS PANES MIRROR AND WC WASH BASIN TO BLDGS IN THE AFMC AREA UNDER GE CENTRAL PUNE

Amount

M&L for preparation of old decorated or unplastered wall surface including cornices and applying one coat of white wash all as specified and directed.

All as per item No 1 above but one coat of white wash on ceiling.

M & L for preparation of old distempered surfaces including washing rubbing down and stopping distempered surfaces and applying one coat of oil bound distemper (White or tinted ) on walls complete all as specified and directed.

M&L for complete removal of existing treatment, on walls and applying one priming coat and two coats of oil bound distemper on walls all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling incl, cornices (plastered or unplastered) by brooming down and scrapping wherever necessary and applying one coat of oil bound distemper complete all as spd and directed.

M&L for complete removal of existing treatment and applying 2mm thick wall care putty and two coats of oil bound distemper on walls all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of cement base paint white or tinted all as specified and directed.

M&L for preparation of old decorated surfaces and providing one coat of weather proof exterior emulsion paint on walls complete all as specified and directed.

M&L for preparation of new or old plastered surfaces and providing one coat of weather proof exterior emulsion paint on cornices, borders, facia of chajjas & projected columns etc complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description not otherwise discribed over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surfaces of any description not otherwise discribed over 10 cm width or girth and applying one coat of synthetic enamal paint complete all as specified and directed.

Demolition of brick work or stone/ boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles and removing rubbish off the premises complete all as directed.

Demolition of cement concrete in ground floors & paving n exc 15cm thickness (below or above ground level) and removing rubbish off the premises complete all as directed.

Demolition of cement concrete of any description & in any position not otherwise specifically provided for.(Roof Kerbs) and removal from site complete all as directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing including ridge tiles and removal of u/s materials from site complete all as directed.

Dismantling battens for tiles, shingles etc. of any size including tilting fillets, spaced exc.15 cm and removal of u/s materials from site complete all as directed.

Dismantling Boarding of any description fixed in any position with nails,with or without cover fillets and removal u/s materials from site complete.

Dismantling timber scantling as in fillets, rails, posts, rafters, purlins etc under 40 sqm in section unframed work and removal of u/s materials from site complete all as directed.

Dismantling plain or corrugated steel sheet, any gauge, thickness and in any position complete including removal of u/s materials from site complete all as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets any thickness, including cover fillets complete and removing from site all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as directed.

M&L for coloured glazed Ceramics tiles 300 x 200 x 7to8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar 1:3 as in backing coat complete all as specified and directed.

All as per item No 22 here-in-before but tiles of size 450 x 300 x 7 to 8 mm thick.

All as per item No 22 here-in-before but tiles of size 600 x 300 x 7 to 8 mm thick.

M&L Non skid ceramic coloured tiles 7to8mm thick, (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match with the surface over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

All as per item No 25 here-in-before but area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm.

All as per item No 26 here-in-before but as in skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:3 all as specified and as directed.

M & L (light shade) vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed.

M & L ( light shade) vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:3 complete all as specified and as directed.

Demolition of stone slabs and tiles of any description and of thickness in floors, aprons etc laid bedded and pointed in any mortar including removing u/s materials off the premises complete all as directed.

M & L granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill , cooking platform and flooring in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with and including screed bed or bedding layer 20 mm thick, in CM 1:6 on stone masonry surfaces complete all as specified and directed.

M & L chamfer, splays or arris in facework to granite exc 15 mm but n exc 50 mm wide.

M&L Machine cut cudappah stone slab 20mm to 25 thick, over and including 20 mm thick screed bed in CM (1:6) laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M & L for Chequered cement concrete tiles 305 x 305 x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigment in floors over and including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 complete all as specified and directed.

M & L precast cement concrete block masanry not exc 10 cm in width with solid blocks of PCC (1:5:8) grade D-4 andsetting in cm (1:4) complete all as specified and directed.

M&L PCC (1:3:6) type- C-1 (using 20 mm graded stone aggregate) as in roof kerbs , rounded or chamfered on edges, including necessary form work complete all as specified and directed.

Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete including removing rubbish off the premises complete all as directed.

M & L for Rendering 10mm thick in cement mortar 1:6 on brick/concrete surfaces finished even & smooth with a thin layer of sagol complete all as specified and directed.

M & L for Rendering 15mm thick in CM (1:4) on fair faces of PCC block walling, using water proofing compound as per manufacturers instructions surface finished with sponge finish. (Note : WPC shall be measured and paid separately).

Supply only integral water proofing compound.

M & L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 2 mm thick wall care putty complete all as specified and directed.

M & L for Preparation of new plastered surfaces of walls and applying two coats of cement base paint all as specified and directed.

M&L for preparation of new plastered surface and applying three coats of white washing on walls complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore including cleaning for re fixing or removal from site complete all as directed.

S & F 15 mm GI tubing medium grade with all fittings & fixed complete to walls / ceiling or laid in floors all as specified & as directed.

Refixing 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as directed.

Taking up or down steel tubing and connection 20 mm bore including cleaning for re fixing or removal from site complete all as directed.

S & F 20 mm GI tubing medium grade with all fittings & fixed complete to walls / ceiling or laid in floors all as specified and directed.

Refixing 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades,shelves , lintels, etc.and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

S & F GI tubing 25 mm bore medium grade with all fittngs and fixed complete to wall / ceiling or laid in floors including taking down old one complete all as specified and directed.

All as per Item No 52 here-in-before but 32 mm bore

All as per item No 52 here-in-before but 40 mm bore

All as per item No 52 here-in-before but 50 mm bore

S & F in repairs vitreous china squatting Pan " Orissa " pattern of size 580 mm X 440 mm white with integral foot rests ( excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan (pedesal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe with and including plastic water closet seat white closed pattern with flat bottom and seat cover and mild steel hinging device complete all as specified and directed.

S&F in repairs vitreous china ceramic white Single peice WC (S or P trap) with UF soft close seat cover, hinges, accessories set, size 365 x 655 x 765 mm , Product Code: LYS-WHT-38851SSM of Jaquar or equivalent model from specified make given in the make list all as specified and directed.

S & F in repairs stainless steel kitchen sink with drainage board made of stainless steel 1 mm thick with plugs washers and waste including bedding in cement mortor or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm X 330mm X 160 mm complete all as specified and directed.

S & F in repairs stainless steel kitchen sink without drainage board of 1 mm thick with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs wash hand basin, vitreous china of size 550mm X 400mm ( flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of supply and fixing waste pipe etc. complete all as specified and directed.

S&F in repair oval shaped vitreous china WHB table top Colonia snow white, fancy type of overall size 595 x 380 mm, as per cat No S2020105 of cera or equivalent model of specified make given in the make list.

S&F in repair oval shaped vitreous china , under/over counter WHB, snow white, fancy type of overall size 550 x 460 mm, as per cat No S2030104 of cera or equivalent model from specified make given in the make list.

S & F 15 mm bore pillar taps,fancy type swan neck spout (Left) and aerator, as per cat No. F2002104 of cera or equivalent model from specified make given in the make list all as directed.

S & F 15 mm bore pillar taps,fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with or without lattered " HOT" or " COLD" with long screwed shanks and fly nuts, complete all as specified and directed.

All as per item No 65 here-in-before but fixed in repairs.

S & F in repairs 15 mm bore bib taps,fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15 mm bore chromium plated 2 way bib cock with wall flange confirming to CAT No. F2002161 of "Cera" or equivalent model from specified make given in the make list all as directed.

S & F in repairs 15 mm bore chromium plated wall mixer (2-in-1) with arrangement for overhead shower confirming to CAT No. F2002401 of " Cera" or equivalent model from specified make given in the make list all as directed.

S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed.

S & F in repairs 15 mm bore stop valves, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

All as per item No 71 here-in-before but long shank concealed type.

S&F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, including flush pipe 32 mm dia complete all as specified and directed.

S & F in repair flush pipe of polyethylene of low or high density or PVC , 32 mm dia for low level flushing cistern/ basins complete all as specified and directed.

S & F gratings 100 mm dia stainless, steel all as specified and directed.

S & F in repair chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.

S & F in repair 125 mm dia swivel type brass chromium plated shower rose of approved quality complete all as specified and directed.

S & F in repairs for health faucet including flexible cod confirming to CAT No. ALD-573 of make- Jaquar or equivalent model from the specified make given in the make list.

S & F in repairs CP toilet paper holder confirming to CAT No. CAN-1151 N of make- Jaquar or equivalent model from the specified make given in the make list.

S & F in repairs 20mm bore gunmetal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

All as per item No 80 here-in-before but 25mm bore

S & F in repairs plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges complete all as specified and directed.

Dismantling water tanks of capacity exc. 250 Ltrs and not exc. 500 ltrs and removal from site complete all as directed.

All as per item 83 here-in-before but capacity exceeding 500 ltrs and not exceeding 1000 ltrs.

S&F 500 litres capacity rotational moulded polythylene water storage tanks of tripple layers (cylindrical vertical with colsed top) hoisted and fixed in postion all as specified and directed.

All as per item No 85 here-in-before but 1000 litres capacity.

Cleaning of PVC water tank of capacity exc 250 but n.exc 500 ltr and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc all as directed.

All as per item no 87 here-in-before but capacity exc 500 but n.exc 1000 ltr.

S & F in repairs ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 20 mm bore complete( 210 gms weight).

S & F in repairs 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

All as per item No 90 here-in-before but 110 mm bore.

S & F 75 mm bore PVC (SWR) bends any radius complete all as specified & directed.

All as per item No 92 here-in-before but 110 mm bore.

S & F 75 mm bore PVC (SWR) bends any radius provided with access door complete all as specified & directed.

All as per item No 94 here-in-before but 110 mm bore.

S & F 75 mm bore PVC (SWR) vent cowl.

All as per item No 96 here-in-before but 110 mm bore.

Taking down wooden door shutter and refixing in the same opeing n.exc1.00 Sqm each including resecuring or easing and adjusting complete.

All as per item No 98 here-in-before but exc 1.00 Sqm and n.exc 2.00 Sqm each.

Taking down angle iron/ wooden chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sq. m but n. exc.4sq m each and removal from site complete all as directed.

S&F II nd class hard wood (haldu/ hallock) plain, solid, straight chowkats & frames , wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified anad directed.

S&F 30 mm thick Flush shutters, solid core construction, with particle board core and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S & F 30 mm thick 2nd class hard wood glazed and skeleton shutters, divided into squres with plain, chamfered or rounded mitered and rebated sash bars any numbers, open rebated prepared to receive guaze, edges of framing plain, chamfered or rounded , fitted with cut and mitered beads for securing glass etc size of members of shutters in SSR Part- I, Section 8, Clause 8.24 (b) all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings complete.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat molded plain co lour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for steel & plain co lour PVC sheets for top rail, lock rail& bottom rail on either side & or gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet banding, and joints togather with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

Cutting holes in stone / brick walls built in cement mortar for inserting hold fasts measured from face of jambs into wall exc. one brick but n. exc.two bricks &making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 all as directed.

S&F mild steel flat iron as in hold fasts fitted to chowkats with nails & welded to angle iron frames complete all as specified and directed.

M & L preparing surfaces of wood or wood based material new or old if any description or girth treating end of post, back of chowkats etc with tar or coal tar black paint complete all as specified and directed.

M & L preparing surfaces of wood or wood based material, steel and iron work, new or old of any description or girth treating small articles such as stop covers, gully traps, grating , hold fasts treated with tar or coal tar black paint area n exc 0.1 Sqm each.

M & L preparation of new or priviously untreated surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F stainless steel wirecloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm & fixed with stainless steel wire stapples complete all as specified and directed.

All as per item No 111 here-in-before but fixed in repairs.

S & F 100 mm long butt hinges medium weight , cold rolled Mild steel for door shutters complete all as specified and directed.

S&F 150 mm aluminium anodized barrel tower bolts of extruded section for door shutters complete all as specified and directed.

S & F 300 mm long aluminium alloy , anodised sliding door bolt with hasp , staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specified and directed.

S & F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S & F floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm complete all as specified and directed.

All as per item No 117 here-in-before but fixed in repairs.

S&F anodized aluminium alloy , 20mm dia hanger rod in cupboards with fixing brackets, stops, rollers etc all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each and removing from site complete all as specified and directed.

S&F three track sliding window with two or more shutter witth 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352

S & F aluminium single leaf door on pivots alongwith hydrulic door closer (Aluminium Extruded section), door lock, handles, 5mm thick plain glas in top and 12mm thick prelaminated particle board (both side laminated) in bottom panel, fixed with rubber beading and glazing clips and using powder sections as given in 'JINDAL' catalogue complete all as directed by Engineer-in-Charge.

S&F ventiltors/ louvers with parttially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed. (a) SP 20048 (b) Glazing clips 19352

S & F powder coated aluminium sections pattern Approved by GE for fixed windows etc. complete all as specified and directed . Note :- The rate quoted under this Item deemed included with necessary joining cleats, glazing clips, door hinges, anodised aluminum snap beading with screws ,rubber packing , locking device and built up handle. ( Partical board / Glass will be measured and paid seperately).

S & F plain sheet glass 5 mm thick plain or tinted, fixed to aluminium frame in partition all as directed. Note:- Beading / rubber packing is included in the rates for aluminium sections above.

S&F 3mm thick sheet glass ordinary quality & glazing with oil putty / wooden beading in squares n. exc. 0.50 sqm in each pane.

S & F 12 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations , fixed with screws to timber/ aluminium frame work complete all as specified and directed.

S & F in repairs Door closer (alminium extruded section body) hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg complete all as specified and directed.

S & F mild steel ordinary rat tail rod pattern spring 300 mm size including roller & roller plate complete all as specified and directed.

S&F in repairs steel windows (factory made) with side hung shutters incl projecting type hinges with steel handles & peg stays , lugs with glazing bars, welded complete all as specified and directed.

S & F mild steel framed work such as grills, framed guard bars etc and similar work confirming to Fe-290, grade E-165 complete all as specified and directed.

M&L for preparation of new or previously untreated surfacs of steel of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down shutters of any description n.exc. 1 Sqm each & removal from site complete all as specified and directed.

All as per item No 133 here-in-before but exc 1.00 Sqm and n.exc 2.00 Sqm.

S&F 18 mm thick PVC sheet shutter one side prelam of any shade as in cupboard or kitchen cabinet etc complete all as specified.

S&F 18 mm thick solid PVC boards as in cupboard shelves, in kitchen cabinet etc complete all as specified.

S&F 5 mm thick solid PVC sheet plain colour as in back side of kitchen cabinet etc complete all as specified.

S&F 75 mm long stainless steel handles complete all as specified.

S&F 40 mm long self closing type hydraulic box type stainless steel hinges complete all as specified.

Taking out old broken glass (any thickness size, quality or description ) from wooden/ metal frames and M & L for sheet glass 3mm thick ordinary quality and glazing with oil putty or fixed with beads, each pane n. exc 0.5 Sqm in area complete all as specified and directed.

All as per item No 140 here-in-before but frosted glass.

S&F in repairs plain fillets in 2nd class hard wood, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area n.exc.3 Sqcm complete all as specified and directed.

S & F in repairs mild steel ordinary rat tail rod pattern spring 300 mm size including roller & roller plate complete all as specified and directed.

S & F in repairs 300 mm long aluminium alloy , anodised sliding door bolt with hasp , staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed.

S & F in repairs alluminium anodised barrel tower bolt of extruded section and fixed as in repairs 150 mm long. Complete all as specified and directed.

S&F in repairs extruded alluminium alloy handles fabricated type anodised size 150 mm complete all as specified and directed.

S & F in repairs hasp and stapple aluminium anodised safety type with MS hinges pin including bolt to hinge plate and fixed with screw 75 mm size complete all as specified and directed.

S & F in repairs mild steel handle (LHS/ RHS) for steel window complete all as specified and directed.

M & L Running welding in repairs thickness of sheet for welding n exc 6 mm complete all as specified and directed.

M & L for II nd class hard wood scantlings, clean sawn, fixed as in purlins, rafters, fixed with nails all as specified and directed.

All as per item No 150 above but except timber.

M&L II nd class hard wood battens, clean sawn, at 30 cm centres, sectional area exceeding 5 Sqcm but not exceeding 15 Sqcm, fixed with nails all as specified and directed.

All as per item No 152 above but except timber.

Preparing surface of wood and wood based material, new of any description and girth and treated with two coats of creosote oil complete all as specified and directed.

All as per item No 154 above but one coat on old surfaces.

M & L for II nd class hard wood boarding 20 mm thick, clean, sawn, planned one side with butt joints, fixed with nails in any situation all as specified and directed.

All as per item No 156 above but fixing only.

M & L Roof tiles, Mangalore pattern, class 'AA' , inerlocking at side joints, laid dry complete all as specified and directed.

All as per item No 158 here-in-before but except tiles.

S&F ridge or hip tiles to suit manglore pattern roofing tiles bedded and jointed in CM 1:6 complete all as specified and directed.

All as per item No 160 above but except tiles.

S&F galvanized plain mild steel sheeting 0.63 mm thick in ridges, hips, valley gutters, drip & straight flashings (length and firth as fixed ) with grade of zinc coating 275 complete all as specified and directed.

M&L for filleting in any position & to any shape, sectional area exc.25 but n. exc. 50 sqcm. In CM 1:4 including all mitres , stops etc, complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type c1 (using 20mm graded aggregate) as in plinth protection/hard standing, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M & L for 75 mm thick PCC (1:4:8) type D2 using 40mm graded aggregate as in sub base of floor, paving etc complete all as specified and directed.

S&F PVC box type cabinet of approx size 35 x 40 x 12 cm with 3mm thick mirror mounted on shutter, with PVC shelves 2mm thick and outer frame having 4mm thickness fixed in existing opening with wooden plugd including taking down existing are complete.

S & F Transparent Glass 7.5 x 7.5 inch corner bathroom shelves with bracket (set of 2) (Model- Joyo Cera Gls 132) or equivalent model of approved make.

S & F in repairs brass chromium plated Tubular towel rail 20mm dia "D" type 60cm long complete all specified and directed.

S&F aluminium powder coated fancy type curtain rod 25mm bore all as specified and directed.

S & F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel plate rack made of 1.00 mm thick sheet grade SS- 304 of standard size 36"x36"x8" and of approved quality of finish all as spd and directed.

M & L for Gypsum ceiling board for ceiling prepainted, preforated finish, 600 x 600 x 9 to 9.5mm thick in size of approved brand/ make laid over and including grid work of size 600 x 600mm made out of 0.5mm thick GI tee 32 x 34mm for main, 25 x 24mm for cross tee and 20 x 20mm angle fixed on wall powder coated finish on exposed faces of tee and angle hung from ceiling using 2mm thick GI suspension wires spaced at 1200mm on main runners including making niches for fans/ light all as specified and directed.

M & L providing and fixing gypsum board 12mm thick in ceiling fixed with screw (as per manufacturers instructions) to GI frame work for seamless ceiling comprision of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediated channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit and approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including two coats of oilbound distemper over a coat of primer complete all as specified and directed.

M & L for decorative POP cornices/ moulding of pattern as approved by Engr-in-Charge of cross sectional area exc 13 Sqcm and not exc 25 Sqcm complete all as directed.

Sunny Enterprises