Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹56.4 L
EMD Value
₹1.1 L
Closing Date
25 Sept 2025, 5:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Bagalkot District Central Co-Operative Bank LTD
M D SAYYAD
CONSTRUCTION OF BANK BUILDING BELONGING TO BDCC BANK LIMITED BAGALKOTE AT BHAGAVATI, BAGALKOTE TALUKA BAGALKOTE DISTRICT
BDCCBL/2024-25/BD/WORK_INDENT7/CALL-3
BDCCBL/2024-25/BD/WORK_INDENT7/CALL-3
Open
Buildings
Two Tender Document System(Two Cover)
The Bagalkot District Central Co-Operative Bank LTD Bagalkot
3 documents required · 1 mandatory · 2 optional
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Pan Certificate
GST registration certificate
Line of Credit/ Bankers certificate at least Rs.17 Lakhs
Valid License copy issued by KPWD/CPWD/MES or any other equivalent
Valid electrical license & MOU if Subcontractor license produced
Valid water supply/sanitary engineering license & MOU if Subcontractor license produced.
Work done certificate of Similar Work /Building (With quantities of work mentioned ) Executed during last 5 years certified by the Engineer not below the rank of Executive Engineer.
BIDDER SHOULD UPLOAD ALL TECHNICAL DOCUMENTS AS PER THE TENDER DOCUMENT
Last Five years turnover certificate duly signed by CA with UDIN Number.(i.e., 2019-2020, 2020-2021, 2021-2022, 2022-2023 and 2023-2024)
₹1,420
₹1.1 L
17 Sept 2025
17 Sept 2025
26 Sept 2025
22 Sept 2025
CONSTRUCTION OF BANK BUILDING BELONGING TO BDCC BANK LIMITED BAGALKOTE AT BHAGAVATI, BAGALKOTE TALUKA BAGALKOTE DISTRICT
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing Random rubble masonry with hard sTonnee in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded sTonnee aggregate 20 mm nominal size...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation,top...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The gr...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The gr...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The gr...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The gr...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The gr...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The gr...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The gr...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
framework and Centering Considering for Percentage on finished rate of concrete per m3 (Page No:111 Addendum I SR-2023-24) 3% of Column Footing Concrete Quantity/Rate is considered
framework and Centering Considering for Percentage on finished rate of concrete per m3 (Page No:111 Addendum I SR-2023-24) 70% of Column Concrete Quantity/Rate is considered
framework and Centering Considering for Percentage on finished rate of concrete per m3 (Page No:111 Addendum I SR-2023-24) 50% of Plinth Beamn Concrete Quantity/Rate is considered
framework and Centering Considering for Percentage on finished rate of concrete per m3 (Page No:111 Addendum I SR-2023-24) 10% of Strong room wall Concrete Quantity/Rate is considered
framework and Centering Considering for Percentage on finished rate of concrete per m3 (Page No:111 Addendum I SR-2023-24) 50% of Roof slab Concrete Quantity/Rate is considered
framework and Centering Considering for Percentage on finished rate of concrete per m3 (Page No:111 Addendum I SR-2023-24) 50% of Staircase Concrete Quantity/Rate is considered
framework and Centering Considering for Percentage on finished rate of concrete per m3 (Page No:111 Addendum I SR-2023-24) 60% of Roof Beam Concrete Quantity/Rate is considered
framework and Centering Considering for Percentage on finished rate of concrete per m3 (Page No:111 Addendum I SR-2023-24) 60% of Lintel Concrete Quantity/Rate is considered
framework and Centering Considering for Percentage on finished rate of concrete per m3 (Page No:111 Addendum I SR-2023-24) 45% of Chajja Concrete Quantity/Rate is considered
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1cement :6coarse sand)including cost of all materials, labour, sc...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...
Providing and fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever require...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and laying Polished Granite sTonnee flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18...
Providing and laying flamed finish Granite sTonnee flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings wi...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfac...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops a...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and t...
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal ...
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cl...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cl...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing gun metal non- return valve of approved quality(screwed end) :(Page No:117 Item No.13.6.1.1 Vol II SR-2023-24)- 25mm Horizontal
Providing and fixing gun metal non- return valve of approved quality(screwed end) : (Page No:118 Item No.13.6.2.1 Vol II SR-2023-24)32mm Horizontal
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end): (Page No:117 Item No:13.4.1 Vol II SR-2023-24) - 25mm Gate valve
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) (Page No:117 Item No.13.4.2 Vol II SR-2023-24)32mm Gate valve
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 g. (Page No:119 Item No:13.13 Vol II SR-2023-24)
Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g (Page No:121 Item No:13.24 Vol II SR-2023-24)
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet an...
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :* 100 mm inlet...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular...
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. (Page No:137 Item No:14.40.2 Vol II SR-2023-24)
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the sl...
Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the sl...
Supplying heavy gauge PVC Conduit Pipe ….dia ....... thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ce...
Supplying And Fixing Metal Fan Box with Round Hook. (Page No:04/105 Item No: 1.13 Vol-VI SR-2023-24)
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/STonnee/C.C wall...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/STonnee/C.C wall...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/STonnee/C.C wall...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/STonnee/C.C wall...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/STonnee/C.C wall...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/STonnee/C.C wall...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistring copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistring copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistring copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistring copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293- 6A One Way Switch (Page No:09/105 Item No:3.6.1 Vol-VI SR-2023-24)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293- 6A Two Way Switch (Page No:09/105 Item No:3.6.2 Vol-VI SR-2023-24)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293- 6A Three Way Socket (Page No:09/105 Item No:3.6.3 Vol-VI SR-2023-24)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293- Stepped Fan Regulator Two Module (Page No:09/105 Item No:3.6.4 Vol-VI SR-202...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293- 32Amps DP switch (Page No:09/105 Item No:3.6.9 Vol-VI SR-2023-24)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293- 6/16A Universal Socket (Page No:09/105 Item No:3.6.10 Vol-VI SR-2023-24)
Supplying of.....feet PVC Batten within tegrated LED tube....W with high quality diffuser with Life o 25000 burning hours & 70%lumen maintenance with CRI greater than 80. Power Input:220-240V@50/60Hz ...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374 -1979 and with double ba...
Supplying wall mounting fan suitable to operate at single-phase 230v A.C.supply(Page No:30/105 Item No:6.5.2 Vol-VI SR-2023-24)-400mm Sweep
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.(Page No:30/105 Item No:6.2.2 Vol-VI SR-2023-24)15" Sweep (450mm)
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.(Page No:57/105 Item No:13....
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixin...
Supply in gand fixing regular MCCB distribution Panel confirming to IS/IEC 61439-3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane(PUR)gasket,with suitable ...
Supply of round /square recess/surface mounted rolling type LED Down light with......WGU10 LED Lamp Rib Fabricated from die cast aluminium with white powder coated prewired to main sconnector & has sw...
Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / ...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.(Page No:18/105 Item No:5.20.1 Vol-VI SR-2023-24)-16-25 Amps 2 pole
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.(Page No:18/105 Item No:5.20.10 Vol-VI SR-2023-24)-63 Amps 4 pole
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 an...
Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination.(Page No:37/105 Item No:8.13.1 Vol-VI SR-2023-24) - 10Pair
Supplying & Fixing Chemical earthling for grounding.Conduits,IC cut-outs & other equipments backfill compound which is non-corrosive,thermally conductive,potential to permissible limits,superior Fault...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
FINAL TENDER DOCUMENT Bhagavati Re- Tender.docx
Tender Document • 3.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .