Inlet

Amount

Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m

Rehandling of earth work

Providing, lowering in trenches to correct gradient and alignment, jointing with tyton rubber joint and cutting of reinforced cement concrete spigot and socketed pipes and specials with rubber ring ISI marekd as per IS code IS 458-2003 into trenches for all depths and laying out the same to correct alignment, gradients, levels etc. cutting of concrete beds and joints holes, supporting the pipes and specials in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benchings, haunches and envelopes are completed. The pipes shall rest on the beds at all joints through their lengths and fixing of rubber ring, facing, testing the pipes for leakage and making good the same leakage and all defects to the entire satisfaction of the Engineer-in-charge including all cartage etc.(RCC NP3 pipe) (i)1800mm i/d pipe

Extra for compaction of earthwork in 20cm layers,dressing,watering,rolling of earth complete in all respects

Centering & Shuttering for Laying concrete

Providing and Laying Cement concrete 1:3:6 (M-10) with 40 mm stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type including s/o and c/o material complete in all respects

Providing and Laying Cement concrete 1:2:4 with stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type including s/o and c/o material complete in all respects

Providing and Laying First class burnt brick work laid in cement sand mortar 1:3 in foundation and plinth including s/o and c/o material complete in all respects.

Providing and Laying 12.5 mm thick cement plaster 1:3 complete in all respect

Extra allowance for scaffolding in tile, brick and concrete lining for side slopes only.

Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position including s/o and c/o material complete in all respects

Providing and Filling stones or spalls into crates and hand packing Including supply of Boulder stone and carriage from approved quary , loading & unloading complete in all respect.

Providing and Laying 1 Ft thick Stone or Kankar block pitchingon slopes of guide bandh and protection works Including supply of Boulder stone and carriage from approved quary , loading & unloading complete in all respect.

Providing and Laying (0.50 Ft Thick ) Filling stone or spall&hand packingon side slopes behind pitching Including supply of Boulder stone and carriage from approved quary , loading & unloading complete in all respect

Weaving wire netting for wire crates including binding sides and partitions to make crate of 15 cm x 15 cm or 25 cm x 7.5 cm mesh including supply of MSA wire 4mm as per Pwd Specifications

Stacking within 15 metres of the unloading points into stacks of specified sizes

Rehandling of boulder from stackyard to site with an av. Lead of 1 km and extra loading/unloading manully

Removal of damaged RCC Hume pipe

Wooden planks (Sal wood wrought)

ONKAR SHARMA CONTRACTOR