Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.2 LAccepted-AOC 127 SHREE RAM COLONY GALI NO 03 JIVAN SINGH KA BAGICHA NAGDA UJJAIN M P 456335 | NAGDA | UJJAIN | MADHYA PRADESH | 456335 | ₹1.2 L | 1 | Accepted-AOC Bidder is Lowest |
| 2 | 2₹1.4 LRejected-AOC | ₹1.4 L | 2 | Rejected-AOC Bidder is Not Lowest |
Tender Value
₹1.7 L
EMD Value
₹3,340
Closing Date
29 May 2026, 5:30 pmClosed
Executive Engineer
Office of The Executive Engineer Light Machinery and E/M. Division Meenakshi Chouk Narmadapuram
Pre- Mansoon Reapir and Maintenance of 35 Nos Sluice gate of 21 Minor irrigation Tank under Sub-Division Bhainsdehi and Betul under Dn. Betul.
2026_WRD_502776_1
632/2026-27
Open Tender
Civil Works - Others
Percentage
25 days
Betul
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
₹3,340
19 Jun 2026
15 May 2026
2 Jun 2026
15 May 2026
29 May 2026
22 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing fabrication and fitting work of stainless steel flat on Embedded parts (on Departmental section ,only MS section given by department)of gates with testing ,including cost of all materials(SS flat and welding rods etc)machinery ,labour,cutting aligning,welding ,finishing,cleaning,applying two coat of cement primer ,etc as complete as per specification and approved drawings,including packing and forwarding charges for structural steel components and other materials. | 14.5 | Kg | 534 | ₹7,743 |
| 2 | Providing casting machining and assembling of cast iron items for tank,canal,barrage,stop dam gates as CI wedges with suitable L-end key nut bolts ,CI couplings ,CI guides,assembly complete as per drawing with testing ,including cost of all materials,with machinery ,labour,cutting aligning,welding ,finishing,cleaning,etc as per specification and approved drawings with all lead and lifts including packing and forwarding charges for structural steel components and other materials. CI couplings, Guides, etc. | 70.5 | Kg | 160 | ₹11,280 |
| 3 | Providing Casting machining and assembling of head stocks assembly with handle complete for operating tank ,canal,barrage,stop dam gates as per drawing with testing ,including cost of all materials as head stock body,GM Nut ,warm wheel ,Gear box,Bush ,Pin ,Operating Handle etc complete as per specification and approved drawings with all lead and lifts including packaging and forwarding transportation charges for structural steel components and other materials. Head Stock screw jack type 50mm dia. Threaded Nut ( Model M-75), 0.750 tonne capacity---- approx-45 kg weight | 90 | Kg | 166 | ₹14,940 |
| 4 | Straightening and machining work of structural steel sections ( Departmental material)complete job with all machinery as planner machine etc labour ,cutting,aligning,finishing ,cleaning etc complete as per specifications and approved drwaings,including packing and forwarding charges for structural steel components and other materials. Straightening work of any steel sections | 175.47 | Kg | 3 | ₹526.41 |
| 5 | Providing,fabrication,threading(square and V threadded as required ) machining,staightening of MS Round bar complete as per drawing with testing including cost of all materials,with machinery ,labour,cutting aligning,welding ,finishing,cleaning,etc as per specification and approved drawings with all lead and lifts including packing and forwarding,transportation charges for structural steel components and other materials. Rate for single start square threading for 56mm dia./50mmdia /45mm dia. round bar with materials | 166.76 | Kg | 135 | ₹22,512.6 |
| 6 | Providing,fabrication,threading(square and V threadded as required ) machining,staightening of MS Round bar complete as per drawing with testing including cost of all materials,with machinery ,labour,cutting aligning,welding ,finishing,cleaning,etc as per specification and approved drawings with all lead and lifts including packing and forwarding,transportation charges for structural steel components and other materials. Rate for single start square threading for 56mm dia./50mmdia /45mm dia. round bar without materials | 11.8 | m | 889 | ₹10,490.2 |
| 7 | Providing, Fabrication, machining with straightening work of Guide Tee, Track, Sealing frame, Leaf frame or any part of gate's, complete as per drawing with testing ,including cost of all materials, with machinery, labour, tools and tackles cutting, aligning, welding, finishing, cleaning ,etc., applying one coat of zinc rich epoxy primer and two coats of cold applied coal tar epoxy paint, etc., complete as per specifications and approved drawings with all lead and lifts, including packing & forwarding, transportation charges for structural steel components and other materials. Rate of work with all materials | 9.8 | Kg | - | - |
| 8 | Providing of High tensile MS Nut Bolts of required size and type as per specification with testing ,including all lead and lifts ,packaging and forwarding charges for all components etc complete. | 16 | Kg | 142 | ₹2,272 |
| 9 | Oiling and greasing work of gate parts like Head stock parts Roller assembly,Operating Rod ,Sealing Frame ,Guide Tee. For Gate size upto 1mX1m | 35 | No | 1,200 | ₹42,000 |
| 10 | Providing and fixing work of head stock Chuck Nut of required size (for M-70/M-75/S-36 type head stock) complete work at site | 4 | No. | 4,780 | ₹19,120 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.04 MB
502776.pdf
Tender Documents • 6.97 MB
BOQ_612052.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].