WBPWD/SEWEC/BRED /NIQ-138/2018-19 (2nd Call)

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) for ECC in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall for horizontal & vertical runs and in suitable size PVC casing-capping (Precision make) for ceiling portion only, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment flushed in wall incl. mending good damages to original finish [only PVC casing-capping on ceiling and remaining portion concealed] Avg. Run 8 Mtr. [ 8(d) / E-23 ]

Distn. wiring in 3 X 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point with Modular type plug socket & switch as per GS.

On Board [ 3 (i) / E- 20 ]

Avg. Run 6 mtr [ 3 (v) / E- 20 ]

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [ 9 (b) / E- 18 ]

Supply & Fixing 1no 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, and 1no 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch,without plug top on 6 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.[ 5 (a) / E- 17 ]

Supply & Fixing 240 V, 25A Modular starter (Brand approved by EIC) on 4 module GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [ 20 / E- 19 ] & [ 2 (b) / E- 17 ]

Supply & Fixing 240 V, 3 nos. 16 A, 3 pin Modular type plug socket with 3 nos. 16A Modular type switch (Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 12 Module GI Modular type switch board with 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [15 / E-19 ]

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [12 / E-18]

Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. [ 17 / E- 12 ]

Supplying & Fixing Industrial Plug & Socket board with 415 V, 30A, TPN & Earth Metal Industrial Plug socket & 30A Industrial top incl. S&F 32 A TPN/FP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. [ 18 / E- 12 ]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS. (Make : Seimens/L&T)

[2+14 Way[ Legrand- Enclosure -607713 ] [ 13 / D- 9 ] (Make : Seimens/L&T)

[2+10 Way[ Legrand- Enclosure -607712 ] [ 13 / D- 9 ] (Make : Seimens/L&T)

[2+6 Way[ Legrand- Enclosure -607711 ] [ 13 / D- 9 ] (Make : Seimens/L&T)

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS.

6 Way ( Make - Legrand-Enclosure- 607716 ) [ 14 / D- 10 ] (Make : Seimens/L&T)

4 Way ( Make - Legrand-Enclosure- 607715 ) [ 14 / D- 10 ] (Make : Seimens/L&T)

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall as per GS. ( Make - Legrand / Make : Seimens/L&T) ] [15 / D- 11 ]

8 Way ( Up to 160 A ) -Enclosure (607914) )

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment [11 / D- 9]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand / Seimens/L&T)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [ Make -Legrand/ Seimens/L&T) ]

25 A TPN [ 7 / D- 6 ]

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA in existing Vertical DBs including necessary connection as per GS [ Make - Legrand /Seimens/L&T)

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment & S/F 4 terminal stud.

Horizontal 6way

Horizontal 4way

Vertical 8way

Cutting channel of following size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works without earth continuity wire as to GS.

Cutting channel of 31 mm x 31 mm size & 13 mm dia 3 mm thick pipe [ 2(a)/ E- 2 ]

Cutting channel of 40mm x 40 mm size & 19 mm dia 3 mm thick pipe [ 3 (a)/ E- 2 ]

Cutting channel of 43 mm x 43 mm size & 25 mm dia 3 mm thick pipe [ 4 (a)/ E- 2 ]

Supplying and fixing 25mm dia PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works [ 7 (b)/ E- 16 ]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make : Polycab/KEI/Havells/Finilex/RR Kable) of the following sizes in the prelaid polythene pipe as per GS.

3x(1.5 sqmm) [ 1(b) / E-9 ]

2x(2.5 sqmm)+1x(1.5 sqmm) [ 1(s) / E-9 ]

2x(4 sqmm)+1x (2.5 sqmm) [ 1(v) / E- 9 ]

4x(6 sqmm)+2x (4 sqmm) [ 1(vii) / E- 9 ]

2x(10 sqmm)+1x(6 sqmm) [ 1(a1) /E- 9 ]

4x(16 sqmm)+2x(10 sqmm) [ 1(g1) /E- 9 ]

4x(16) sqmm) [ 1(r) /E- 9 ]

4x(50) sqmm) [ NS ]

Supplying & Fixing sheet metal inspection box (16 SWG) of sizes 175 mm x 100 mm x 65 mm flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works including top cover as per GS. [ 11(c) / E- 4 ] & [ 13(c) / E- 5 ]

Supply of 2/4/3.5 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make Nicco / Havells/Poly cab/ Gloster/ As per choice of EIC]

2 Core 10 Sq. mm [ NS ]

4 Core 16 Sq. mm [ NS ]

4 Core 25 Sq. mm [ NS ]

3½ Core 70Sq. mm [ NS ]

Laying of cable after cutting floor/pavement/wall incl. 2 nos. 10 SWG GI wire as per GS for the following Sizes.

2.5 to 35 Sq. mm [ 5(i)/ F- 3 ]

35 to 95 Sq. mm [ 5(ii)/ F- 3 ]

Laying of cable following size of cable in underground trench as per GS for the following numbers of Cables.

2 Nos up to 3½ Core 70 Sq. mm [ 2(b)/ F- 2 ]

1 No Cable up to 35 sqmm [ 1(a)/ F- 2 ]

Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2/4 / 3.5)Core as per GS.

2 Core 10 Sq. mm [7(a)/F4 & 8(b) /F5]

4Core 16 Sq. mm [7(c)/F4 & 8(b) /F5]

4Core 25 Sq. mm [7(c)/F4 & 8(b) /F5]

3½ Core 70 Sq. mm [7(c)/F4 & 8(b) /F5]

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.[50 mm dia] [F-6/11.E]

S/F Round surface mounted LED flat panel light fittings on ceining with all accessories. (Make-Crompton -PEARL-II LCDSPL-R-12-CDL /Philip/Wipro/Bajaj)

Supply & Delivary of following LED tube light fittings--

Box type Twin fittings (Make-Crompton- IGP132LT8-16 )/Philip/Wipro/Bajaj)

Box type Single fittings (Make-Crompton- IGP131LT8-16 )/Philip/Wipro/Bajaj)

Batten type Single fittings (Make-Crompton-DMLN1LT8-8 )/Philip/Wipro/Bajaj)

LED tube lamp- (Make-Crompton- LTT8-20 /Philip/Wipro/Bajaj))

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [ 17/C-2 ]

Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener. [ 14 (b)/C-2 ]

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling incl. S/F 12 Watt LED bulb

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit as per GS [16/C-2 ]

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. [ 10 / E-18 ]

Supply of 1200 mm sweep ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS (Make - Crompton- Aura Metalic/Usha - Striker

Fixing 1200 mm sweep ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting

Supply of 400mm sweep wall mounted /cabin fan ( Make - Crompton- cat no- WMSDX-120, 400mm /Usha/Orient)

Fixing 400mm sweep wall mounted /cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. Length ( Make - Crompton- cat no- WMSDX-120, 400mm/Usha /Oriient)

Supply of 300 sweep, 230V, exhaust fan complete with all accessories. (Make EPC- 300mm, 1420rpm)

Supply & Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of 300 mm sweep incl. Supply & Fixing louver shutter ( Aluminum)on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as per GS (Make EPC- 300mm, 1420rpm)

Supply of following LED light fittings with all accessories. Make- Crompton Greaves/Philip/Wipro/Bajaj)

Crompton LSTP-45-CDL //Philips/Wipro/Bajaj)

Fixing only out door light fitting on compond complete with all accessories on existing pole or bracket .[NS]

Supplying & Erection of 7 mtr long (410 SP - 32) Single Steel tubular pole of size Bottom- 5mtr, Middle-2mtr, Top 2 mtr, Outside Dia & Thickness of Section of Bottom- 165.1x4.85 mm , Middle- 139.7x4.50mm & Top- 114.3x3.65 mm with/without sole plate & Cap, with singale header assembly etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly.[NS]

Extra on items above, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 25cmx25cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole [ 3( a/i )/H-1 ]

Providing CC (6:3:1) muffing 450x450x600 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if necessary With 200x150x100mm 16 SWG GI Loop Box [ 13( b )/I-1 ]

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. Upto 9.0 mtr. long pole as follows- [ 4(a)/H-2 ]

1st coat of aluminium paint over 1 coat of RO priming

2nd coat of aluminium paint over 1st coat

PANEL NO-1 (Normal panel) S & Installation wall mounted Industrial type panel of size as per approved drawing for accommodation of following accessories. The panel board should be made with 14 SWG CRC Sheet and frame of the panel with angle (40x40x6mm & 25x25x6mm), flat (40x6mm) iron structure for proper placement of following accessories. The connection of switches with busbar should be made with copper conductor cable of proper size & capacity. The metering connection should be made with 1.5 sq. mm. of copper wire. The panel board should be painted with two coats of oil paint of approved quality paint over 1 coat of red led primer after finishing the surface properly with sand paper. The brought terminals of cable connection should be supported by Insulator .The materials & design should be approved by E.I.C before fabrication & erection.(The panel should be made from CPRI approved manufacturer)

In Coming Arragment 4 nos. Bus-bar of size 40x5mm bar made of tinned copper covered with heat shrinkable sleev with chamber.

In Coming Arragment S/F 415V, 315 A, TPN SFU with sheet steel enclosure incl. 3 nos. 415A DIN type HRC fuse (make L&T /Siemens/ABB). ---- 1 nos.

Out going Arragment S/F 415V, 250 A, TPN SFU with sheet steel enclosure incl. 3 nos. 315A DIN type HRC fuse (make L&T /Siemens/ABB). ---- 1 nos.

S/F 415V, 200 A, TPN SFU with sheet steel enclosure incl. 3 nos. 200A DIN type HRC fuse (make L&T/ Siemens/ABB). ---- 1 nos.

S/F 415V, 63 A, TPN SFU with sheet steel enclosure incl. 3 nos. 63A DIN type HRC fuse (make L&T / /Siemens/ABB). ---- 1 nos.

S/F indicating lamp(LED, RYB) for indicating lifetime of each phase at a galance as per RED, YELLOW , BLUE ( L&T /Siemens/ABB)---- 3 nos.

S/F CT (315/5 A , 15VA/ CI.1 ) --- nos. ( Make : AE/Kappa)

PANEL NO-2 (Generator panel) S & Installation wall mounted Industrial type panel of size as per approved drawing for accommodation of following accessories. The panel board should be made with 14 SWG CRC Sheet and frame of the panel with angle (40x40x6mm & 25x25x6mm), flat (40x6mm) iron structure for proper placement of following accessories. The connection of switches with busbar should be made with copper conductor cable of proper size & capacity. The metering connection should be made with 1.5 sq. mm. of copper wire. The panel board should be painted with two coats of oil paint of approved quality paint over 1 coat of red led primer after finishing the surface properly with sand paper. The brought terminals of cable connection should be supported by Insulator .The materials & design should be approved by E.I.C before fabrication & erection.(The panel should be made from CPRI approved manufacturer)

In Coming Arragment 4 nos. Bus-bar of size 30x5mm bar made of tinned copper covered with heat shrinkable sleev with chamber.

In Coming Arragment S/F 415V, 160 A, TPN SFU with sheet steel enclosure incl. 3 nos. 160A DIN type HRC fuse (make L&T /Siemens/ABB). ---- 1 nos.

S/F 415V, 100 A, TPN SFU with sheet steel enclosure incl. 3 nos. 100A DIN type HRC fuse (make L&T /Siemens/ABB). ---- 1 nos.

S/F 415V, 160 A, TP Fornt operatable change over switch with sheet steel enclosure incl. (make L&T /Siemens/ABB). ---- 1 nos.

Out going Arragment S/F 415V, 125 A, TPN SFU with sheet steel enclosure incl. 3 nos. 125A DIN type HRC fuse (make L&T /Siemens/ABB). ---- 1 nos.

S/F 415V, 63 A, TPN SFU with sheet steel enclosure incl. 3 nos. 63A DIN type HRC fuse (make L&T /Siemens/ABB). ----2 nos.

S/F 415V, 32 A, TPN SFU with sheet steel enclosure incl. 3 nos. 32A DIN type HRC fuse (make L&T). ---- 3 nos.

S/F 415V, 32 A, DP SFU with sheet steel enclosure incl. 2 nos. 32A DIN type HRC fuse (make L&T /Siemens/ABB). ---- 2 nos.

S/F indicating lamp(LED, RYB) for indicating lifetime of each phase at a galance as per RED, YELLOW , BLUE ( L&T /Siemens/ABB)---- 3 nos.

S/F CT (200/5 A , 15VA/ CI.1 ) --- nos. ( Make : AE/Kappa)

SUB-HEAD 9 -- EARTHING Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [4(a)/G-2 ]

Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil [ 1(b)/G-1 ]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe [ 2(b)/G-1 ]

Connection the equipments with earth bas bar by S/F 4no SWG GI wire with all accessories as to GS.

SUB-HEAD 10 -- AC MACHINE SITC of 2.2T wall mounted Split type room Air Conditiner (cooling only) having the following specification & features.: a) Cooling capacity nominal (BTU /HR): 26000; Cooling Cap(min) Guaranteed (BTU/HR):25248 b) Star Rating -5 star c) Rated Voltage-230 V + / -5%, Frequency -50 Hz d) Compressor type- Rotary e) Mini. Room Discharge Air Flow Rate-1350CMH f) Refrigrant: R- 410A g) Cordless Remote Arrangement with all modernized provision of temperature setting , Fan speed option ( Low. Medium /High ) Auto Swing h) Control PCB unit of indoor unit should be covered with metalic enclosures. (Make :- MITSUBISHI HEAVE INDUSTRIES LTD, model: SRK25CSS-S6/A/O -General) With 15A plug top, 2mt long input cord , & all other installation kit except indoor to out door unit connecting pipes & cables, out door unit will be fixed on wall with heavy type wall base.Incl supply of wall base./on floor with necessary iron chair (300mm hight). fixed on roof floor.

SITC of 1.5T wall mounted Split type room Air Conditiner (cooling only) having the following specification & features.: a) Cooling capacity nominal (BTU /HR): 18000; Cooling Cap(min) Guaranteed (BTU/HR):21000 b) Star Rating -5 star c) Rated Voltage-230 V + / -5%, Frequency -50 Hz d) Compressor type- Rotary e) Mini. Room Discharge Air Flow Rate-1350CMH f) Refrigrant: R- 410A g) Cordless Remote Arrangement with all modernized provision of temperature setting , Fan speed option ( Low. Medium /High ) Auto Swing h) Control PCB unit of indoor unit should be covered with metalic enclosures. (Make :- MITSUBISHI HEAVE INDUSTRIES LTD, model: SRK20CSS-S6/A/O-General) With 15A plug top, 2mt long input cord , & all other installation kit except indoor to out door unit connecting pipes & cables, out door unit will be fixed on wall with heavy type wall base.Incl supply of wall base./on floor with necessary iron chair (300mm hight). fixed on roof floor.

S&F 15.88mm&6.35mm copper pipe with keno foam insulation & 4core 2.5Sqmm & 4core 1.5Sqmm copper un aurmored cable. [ for connection of plug socket to out door unit & out door to indoor unit]

S&F 15mm dia nylon rainforced PVC flexible drain pipe.

SUB-HEAD 11 -- MISCELENEOUS Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board [ 20( c )/D-13 ]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

2.5sqmm [9 (i)/F-5]

4 sqmm [9 (ii)/F-5]

6 sqmm [9 (iii)/F-5]

10 sqmm [9 (iv)/F-5]

16 sqmm [9 (v)/F-5]

50 sqmm [9 (v)/F-5]

Supply & fixing AC machine controll timer DB consist with following item concealed in wall. a) 22A DP Power Contactor with 220V coil voltage, ( L&T, Cat No. MNX22-2P, CS90238 )-- 1set b) Digital Time Switch ( L&T, Cat No. Crono 67DDT0 )-- 1 set c) Toggol switch-- 1 no d) Indicating Lamp--- 1set f)SPN MCB DB 2+8Way [ Legrand- Enclosure -607711-- 1 set g) 240V, 25ASP MCB ( legrand )--- 1 set e) Wiring with 4 sq mm FR PVC insulated wire, including connector, and panel locking arrangement as per instruction of EIC.

Supply & fixing AC machine controll timer DB consist with following item concealed in wall. a) 22A DP Power Contactor with 220V coil voltage, ( L&T, Cat No. MNX22-2P, CS90238 )-- 2set b) Digital Time Switch ( L&T, Cat No. Crono 67DDT0 )-- 2 set c) Toggol switch-- 2 no d) Indicating Lamp--- 1set f)SPN MCB DB 2+8Way [ Legrand- Enclosure -607711-- 1 set g) 240V, 25ASP MCB ( legrand )--- 2 set e) Wiring with 4 sq mm FR PVC insulated wire, including connector, and panel locking arrangement as per instruction of EIC.

Supplying and fixing 32A , 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. 32 A DIN type HRC fuse as per rating. Male- L&T [ 4( a )/D-3 / Seimens/ABB ]

Supplying and fixing 63A , 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. 32 A DIN type HRC fuse as per rating. Male- L&T [ 4( a )/D-3 ]

Supplying and fixing 63A , 415V, TPN change over switch with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. Make- L&T/ Seimens/ABB ) [ 4( a )/D-3 ]

Supplying and fixing 9- 15 A , 415V, MU- G6 starter with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc (L&T-SS97756/ Seimens/ABB )

Supplying and fixing 9- 15 A , 415V, MF1 starter with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc (L&T-SS97210 /Seimens/ABB )

Dismantling existing wiring & unservisable materials incl. Mending good the damaged of building works and submit those materials to the concerned authority by one electrician, one no masson, 3 nos helper as per instruction of EIC.

BAKRESWAR CO-OP MULTIPURPOSE SOCIETY LTD