CERTAIN REPAIRS TO FURNITURE AT BSO YARD AT MILITARY STATION SRI GANGANAGAR.

Amount

S&F in replacement Ply wood 4mm thick ISI marked with teak face on inner side (front portion) and commercial face on outer side (back portion) of the head board and 4mm thick plywood ISI marked commercial face on both side of the head board (back portion) of Bed Ply wood (Hard Bed) along with Teak Wood beading 4mm thick & 30mm wide to sides and top of head board complete all as specified and directed by Engineer - in – Charge Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable

S&F in replacement Ply wood 4mm thick ISI marked with teak face on inner side (front portion) and commercial face on outer side (back portion) of the foot board and 4mm thick plywood ISI marked commercial face on both side of the foot board (back portion) of Bed Ply wood (Hard Bed) along with Teak Wood beading 4mm thick & 30mm wide to sides and top of head board complete all as specified and directed by Engineer - in – Charge Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable

S&F in replacement long rail made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable

S&F in replacement short rail after making the same from long rail complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable Note:- Short shall be from with long rail obtained from srl item No '3' .

S&F in replacement Plywood top (Cover) 12 mm thick plywood BWR ISI marked, of size 1800mm x 900mm complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable

S&F in replacement Legs made out of Ist class Hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable

S&F in replacement Plywood top (cover) 12mm thick plywood BWR ISI marked of size 1980 x 850mm complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable

S&F in replacement Head board made out of 18 thick prelaminated particle board ISI marked alongwith PVC beading to sides and top of head board complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable

S&F in replacement Foot board made out of 18mm thick prelaminated particle board ISI marked alongwith PVC beading to sides and top of foot board complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable

S&F in replacement PVC Shoes for legs of bed hard map complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable

S&F in replacement Top of peg table made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg : FD-236, FD-277, FD-255, FD-383, FD-384

S&F in replacement leg of peg table made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-236, FD-277, FD-255, FD-383, FD-384

S&F in replacement short rail of peg table made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-236, FD-277, FD-255, FD-383, FD-384

S&F in replacement Long rail of peg table made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-236, FD-277, FD-255, FD-383, FD-384

S&F in replacement Top of Teapoy verandah made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge

M & L for applying one coat of synthic enamel paint wihite to teapoy Verandha including preparation of surfaces complete all as specified and directed by Engr-in-Change

S&F in replacement top of table centre, made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg :FD-231, FD-274, FD-232, FD-278, FD-382

S&F in replacement Leg of table centre, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge

S&F in replacement Top of Teapoy made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified and directed by Engineer - in – Charge. Drg : FD – 235, FD-382

S&F in replacement Leg of teapoy, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD – 235, FD-382

S&F in replacement Long rail of table centre, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-231, FD-274, FD-232, FD-278, FD-382

S&F in replacement Short rail of table centre, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-231, FD-274, FD-232, FD-278, FD-382

S&F in replacement Top of table bed side, made out of 18mm thick prelaminated partical beading board ISI marked alongwith 4mm Teak wood beading alround complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248

S&F in replacement Side of table bed side, made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248

S&F in replacement shelf of table bed side, made out of 12mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248

S&F in replacement back ply of table bed side made out of 6mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248

S&F in replacement Top of Almirah Mess utensils size 1065x434x19mm, made out of block board ISI marked covered with 1mm thick laminated sheet along with 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg : FD-93

S&F in replacement Shelf of Almirah Mess utensils size 1025x420x19mm, made out of planks of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-93

S&F in replacement Shelf of Almirah Mess utensils size 1025x270mmx19mm thick, made out of planks of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-93

S&F in replacement Back Ply of Almirah Mess utensils size 1065x1570x10mm, made out of 10mm thick plywood commercial face both sides ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-93

S&F in replacement Shutter of Almirah Mess utensils made out of 19mm thick block board ISI marked covered with 1mm thick laminated sheet complete all as specified and directed by Engineer - in – Charge. Drg : FD-93

S&F in replacement Aluminium handle anodised 100mm long complete of Almirah Mess utensils complete all as specified and directed by Engineer - in – Charge. Drg : FD-93

S&F in replacement hasp & staple 75mm long of aluminium anodised of Almirah Mess utensils complete all as specified and directed by Engineer - in – Charge. Drg : FD-93

M & L for melamine polishing on Teak wood one or more coats to exposed surface including preparing the surface of bed ply wood top complete all as specified & directed by Engineer-in-Charge. Drg : FD-214, FD-215, FD-245, FD-246,

M & L for melamine polishing on Teak wood, one or more coats to exposed surface including preparing the surface of table peg complete all as specified and directed by Engineer - in – Charge Drg : FD – 236, FD – 277, FD – 284, FD-383 & 384

M & L for melamine polishing on Teak wood, one or more coats to exposed surface including preparing the surface of table centre / teapoy complete all as specified and directed by Engineer - in – Charge Drg : FD – 232, FD – 278. FD – 235, FD-382

M & L for melamine polishing on Teak wood, one or more coats to exposed surface including preparing the surface of table bed side complete all as specified and directed by Engineer - in – Charge Drg : FD – 276, FD-248

M & L for melamine polishing on Teak wood, one or more coats to exposed surface including preparing the surface of Almirah Mess Utensils complete all as specified and directed by Engineer - in – Charge Drg : FD – 93

S&F in replacement knob of CP Brass as per existing design and size to various wooden furniture where as required complete all as specified and directed by Engineer - in – Charge

S&F in replacementof 100 mm thick foam rubber cushion of size 530x560 mm , 32 density duly covered with tapestry cloth for seat and back complete all as specified and directed by Engineer-in-Charge. Note : Tapestry cloth should not be not less than the rate of Rs 300/- per mtr Drg : FD-258 , FD-281 and FD -373

S&F in replacement of arm of sofa set single or 3 seater made out of 1st class hard wood (Shisham) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373

S&F in replacement leg of sofa set single or 3 seater made out of 1st class hard wood (Shisham) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373

S&F in replacement side rail/front rail (size 100 mm x 35 mm) of sofa set single or 3 seater made out of 1st class hard wood (Shisham) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373

S&F in replacement front rails of sofa set 3 seater made out of 1st class hard wood (Shisham) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373

S&F in replacement (seat and back) batten of sofa set single or 3 seater made out of 1st class hard wood (Shisham) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373

S&F in replacement bottom rail of seat and back of sofa set 3 seater made out of 1st class hard wood (Shisham) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373

S&F in replacement top (size 1900 x 685 mm) of table dining ORs made out of 19mm thick block board commercial type ISI marked covered with 1mm thick laminated sheet including 4mm thick teak wood beading complete all as specified and directed by Engr-in-Change Drg : FD-165 (M)

S&F in replacement members of frame of table dining ORs/Forms with or without back such as legs, stiffeners etc made out of M.S. pipe 25 Sqmm (16 gauge wall thickness) including cutting, welding, bending etc providing one coat of red oxide primer complete all as specified and directed by Engr-in-Change Drg : FD-165 (M) 77 (M) 78 (M)

M & L for applying one coat of synthetic enamel paint black including preparation of previously treated/old steel surface of mild steel tube frame of table dining ORs complete all as specified and directed by Engineer -in- Charge. Drg : FD-165 (M)

S&F in replacement of Seat cushion of chair dining cushioned, 75mm thick of 32 density duly covered with tapestry cloth complete all as specified and directed by Engr-in-charge.Drg : FD/E6/MAP-II/04 Note :- Tapestry cloth should not be less than the rate of Rs. 300/- per RM.

S&F in replacement Front leg of chair dining made out of 1st class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP-II/04

S&F in replacement Rear leg of chair dining made out of 1st class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP-II/04

S&F in replacement Front/side/back rail of chair dining made out of 1st class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP-II/04

S&F in replacement Stiffener of chair dining made out of 1st class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP-II/04

M & L for melamine polishing one or more coats to surface exposed to view including preparing the surface of Sofa Set 4/5 seater complete all as specified and directed by Engineer - in - Charge . Drg : FD – 258, FD – 281, FD – 373

M & L for melamine polishing one or more coats to surface exposed to view including preparing the surface of chair dining cushioned complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP-II/04

S&F in replacement locking device of brass bright finish, six lever with keys in duplicate for each lock to almirah steel large/medium complete all as specified and directed by Engineer- in- charge.Drg No. FD-67(M) FD-243(M) as applicable

S&F in replacement 3 way locking system made out of 10mm dia Mild steel Rod to almirah large steel complete all as specified and directed by Engineer- in- charge. Drg No. FD-67(M)

S&F in replacement 3 way locking system made out of 10mm dia Mild steel Rod to almirah medium steel complete all as specified and directed by Engineer - in – Charge. Drg : FD-243(M),67 (M) as applicable

S&F in replacement handles steel chromium plated suitable for almirah medium/Large steel complete all as specified and directed by Engineer- in- charge.Drg : FD-243(M) FD-67(M) and as applicable

S&F in replacement 'G' clamps suitable for re-fixing of shelves of almirah large/Med steel with machine screws complete all as specified and directed by Engineer- in- charge.

S&F in replacement Pedestals locker steel made out of 1.00mm thick plain black iron sheet including one coat of synthetic enamel (silver grey) paint over one coat of red oxide primer to locker steel complete all as specified and directed by Engineer - in – Charge.Drg : FD-257

S&F in replacement Pedestals locker steel made out of 1.00mm thick plain black iron sheet including one coat of synthetic enamel (silver grey) paint over one coat of red oxide primer to almirah medium steel complete all as specified and directed by Engineer- in- charge.Drg : FD-243(M)

S&F in replacement Pedestals locker steel made out of 1.00mm thick plain black iron sheet including one coat of synthetic enamel (silver grey) paint over one coat of red oxide primer to almirah large steel complete all as specified and directed by Engineer-in-Charge. Drg : FD-67(M)

S&F in replacement handles alluminium anodised 100mm long 'D' type of locker steel complete all as specified and directed by Engineer- in charge. Drg : FD-257 (M)

S&F in replacement hasp & staple aluminium anodised 75mm x 40mm x 3mm thick safety type of locker steel complete all as specified and directed by Engineer-in-Charge. Drg No. FD-257(M)

S&F in replacement shelves made out of PBI sheet 1mm thick made to shape as per drawing and painted with one coat of synthetic enamel paint (silver grey) over a coat of red oxide primer of almirah large Steel complete all as specified and directed by Engineer-in-Charge. Drg : FD-67M

S&F in replacement shelves made out of PBI sheet 1mm thick made to shape as per drawing and painted with two coats of synthetic enamel paint (silver grey) over a coat of red oxide primer of almirah medium steel complete all as as specified and directed by Engineer-in-Charge. Drg : FD-243

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of almirah large steel inside and outside complete all as specified and directed by Engineer-in-Charge. Drg : FD-67(M)

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of almirah steel medium complete all as specified and directed by Engineer-in-Charge.Drg : FD-67(M)

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of locker steel complete all as specified and directed by Engineer-in-Charge.Drg : FD-257

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of almirah steel large MAP complete all as specified and directed by Engineer-in- Charge. Drg : FD/E6/MAP/18

S&F in replacement Seat cushion 75mm thick, 32 density covered with approved quality tapestry cloth of chair computer complete all as specified and as directed by Engineer-in-Charge Drg : TP/FD/E6/MAP/01

S&F in replacement Back cushion 50mm thick 32 density covered with approved quality tapestry cloth of chair computer complete all as specified and directed by Engineer - in – Charge. Drg : TP/FD/E6/MAP/01

S&F in replacement Pedestal assembly as per existing design of chair computer complete all as specified and directed by Engineer - in – Charge. Drg : TP/FD/E6/MAP/01

S&F in replacement Caster wheel as per existing design of chair computer complete all as specified and directed by Engineer - in – Charge. Drg : TP/FD/E6/MAP/01

S&F in replacement Hydraulic system as per existing design of chair computer complete all as specified and directed by Engineer - in – Charge. Drg TP/FD/E6/MAP/01

S&F in replacement Arms/Handle as per existing design of chair computer complete all as specified and directed by Engineer - in – Charge. Drg : TP/FD/E6/MAP/01

S&F in replacement Shutter made out of 18 mm thick prelaminated particle board with piano type hinges as per existing to Bin multipurpose MAP complete all as specified and as directed by Engineer-in-Charge Drg : FD/E6/MAP/09

S&F in replacement mild steel Handle 100 mm long with 02 Nos screw as per existing design to Bin multipurpose MAP complete all as specified and directed by Engineer - in – Charge. Drg : D/E6/MAP/09

S&F in replacement Magnate catcher as per existing design to Bin multipurpose MAP complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/09

S&F in replacement drawer as per existing and as shown on drg to Bin multipurpose MAP complete all as specified and directed by Engineer - in – Charge.Note :- Tapestry Cloth should not be less than the rate of Rs. 200/-per RM. Drg : FD/E6/MAP/09

S&F in replacement seat of chair dining JCO/Ors made out of PVC sheet, 4mm thick and weight not less than 0.50 Kg of each seat all as specified and directed by Engineer- in- charge. Make : Ashoka/Amko Drg No. FD/MAP-II/05

S&F in replacement seat & back of chair verandah JCO/Ors made out of PVC sheet, 4mm thick and weight not less than 1.850 Kg of each seat and back grooves 90 x 10 mm, 10 Nos. on seat & back all as specified and directed by Engineer- in- charge. Make : Ashoka/Amko Drg No. FD/MAP-II/05

M&L for applying one coat of synthetic enamel paint (White) with spray machine including preparation, rectification and denting etc. of steel surfaces of Chair Verandah JCO/OR complete all as specified and directed by Engineer-in-Charge.Drg : FD-67(M) and as applicable

Taking down un-serviceable plastic cane and re-canning with new 2mm wide half round plastic cane except that of border which shall be 3 mm flat superior quality cream / white colour and weaving in accordance to Godrej pattern as shown on DRG NO.FD-03(M),FD-279,FD-229,FD-280 and as applicable complete all as specified and directed by Engineer – in - Charge. (Make of cane : Shah & shah / M/s Premier/ Indian Plastic)

Taking down un-serviceable plastic cane and re-canning/ re-weaving with 4mm wide flat plastic cane as shown on DRG NO.FD-19(M),FD-359, FD-256 for chair verandah complete all as specified and directed by Engineer – in - Charge. (Make of cane : Shah & shah / M/s Premier/ Indian Plastic)

M & L for 3mm thick gas welding to mild steel tubing 19/20mm dia broken leg / frame of chair verandah as shown on DRG NO.FD-19(M),FD-359, FD-256 complete all as specified and directed by Engineer – in - Charge.

M & L for preparation of old painted steel surfaces of chair verandah and applying one coat of synthetic enamel paint (As per existing colour) complete all as specified and directed by Engineer – in - Charge.DRG NO. FD-19(M),FD-359, FD-256

S & F in replacement PVC shoe of best quality complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-19(M),FD-359, FD-256

S&F in replacement Front leg of chair dining using 1st class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-279,FD-16

S&F in replacement Rear leg of chair dining using 1st class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-279,FD-16

S&F in replacement Front rail/back rail/side rail of chair dining using 1st class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-279,FD-16

S&F in replacement back rest of chair dining using 1st class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-279,FD-16

S&F in replacement stiffener of chair dining using 1st class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-279,FD-16

S&F in replacement Front leg of chair writing using 1st class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-250,FD-280

S&F in replacement Rear leg of chair writing using 1st class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-250,FD-280

S&F in replacement Front rail/back rail/side rail of chair writing using 1st class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-250,FD-280

S&F in replacement Back rest of chair writing using 1st class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-250,FD-280

S&F in replacement Stiffener of chair writing using 1st class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-250,FD-280

S&F in replacement Front leg of chair easy using 1st class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-229,FD-201

S&F in replacement Rear leg of chair easy using 1st class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-229,FD-201

S&F in replacement Arms of chair easy using 1st class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-229,FD-201

S&F in replacement Rail of seat frame of chair easy using 1st class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-229,FD-201

S&F in replacement Rail of back frame of chair easy using 1st class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-229,FD-201

S&F in replacement Cushion (50mm thick of 32 denasity) with tepastry cloth cover as per existing design of Stool dressing cushioned complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-282&TP Note:- Tapestry cloth shall be of superior cloth of costing not less than Rs 275 per meter with 1.25 meter width as apptoved by BSO

S&F in replacement leg of Stool dressing cushioned using 1st class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-282&TP

S&F in replacement Front rail of Stool dressing cushioned using 1st class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-282&TP

S&F in replacement Side Rail of Stool dressing cushioned using 1st class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-282&TP

M & L for preparing of all exposed wooden or wood based surfaces of chair dining and applying two coats of Melamine polish complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-16,FD-228,FD-279

M & L for preparing of all exposed wooden or wood based surfaces of chair writing and applying two coats of Melamine polish complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-250,FD-280

M & L for preparing of all exposed wooden or wood based surfaces of chair easy and applying two coats of Melamine polish complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-229,FD-201

M & L for preparing of all exposed wooden or wood based surfaces of stool dressing cushioned and applying two coats of Melamine polish complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-282&TP, FDE6/MAP/14

S&F in replacement 10 mm dia mild steel round bar of chair verandah as per existing design complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-19(M) FD-359,FD-256

S&F in replacement PVC handle with two Nos of nuts and bolts as per existing design of chair writing MAP/Chairconference/ chair visitor complete all as specified and directed by Engineer – in - Charge.DRG NO. FD/E6/MAP/12&TP

S&F in replacement seat cushion 50 mm thick of 32 density with Tapestry Cloth cover of chair writing MAP/Chairconference/ chair visitor complete all as specified and directed by Engineer – in - Charge.DRG NO.FD/E6/MAP/12&TP

S&F in replacement back cushion of chair writing MAP/Chairconference/ chair visitor complete all as specified & directed by Engineer-in-Charge.DRG NO. FD-282&TP,FDE6/MAP

S&F in replacement Top of table dining, (size 1200mm x 900mm x 760mm) made out of 18 mm thick prelaminated particle board ISI marked with 4mm thick TW beading alround complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-273

S&F in replacement leg of table dining, (size 1200mmx900mmx760mm) made out of 1st Class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-273

S&F in replacement Long rail of table dining, (size 1200mmx900mmx760mm) made out of 1st Class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-273

S&F in replacement Short rail of table dining, (size 1200mmx900mmx760mm) made out of 1st Class hard wood shisham complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-273

S&F in replacement ply wood top from Charpoy GI pipe 32 mm bore with new ply wood 12 mm thick 7 ply BWR Grade ISI marked fixing with nuts & bolts as per existing size and shape complete all as specified and directed by Engineer - in - Charge. DRG NO. FD-220

Assembling / tightening of loose socket of charpoy frames with minor repairs complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement galvanized iron elbow (ISI marked) suitable for 32mm bore galvanized iron pipe of Charpoy complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement galvanized iron check nut 6mm thick (ISI marked) suitable for 32mm bore galvanized iron pipe of Charpoy complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement long rail made out of galvanized iron pipe 32mm bore medium grade ISI marked and fixing duly threaded / welded to galvanized iron pipe of charpoy complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement short rail made out of 32mm bore galvanized iron pipe long rail obtained from long rail and fixing duly threaded/welded to Charpoy GI pipe complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement leg made out of 32mm bore galvanized iron pipe long rail obtained from short rail and fixing duly threaded/welded to Charpoy GI pipe complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

M & L for welding broken / cracked joints of charpoy galvanized iron pipe 32mm bore (i.e. short rail, long rail, leg etc.) upto 32mm dia x 3mm thick by gas welding as per existing design complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement 25 x 3mm flat iron clamp including washer made to shape as per existing design and welded to Charpoy GI pipe complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220

S&F in replacement of top of charpoy IP folding hard top with ply wood top cover 12mm thick BWR grade 1980mmx900mm top with suitable nuts and bolts complete all as specified and directed by Engineer-in-charge (Drg No. FD -388(R)

M&L for welding to broken/craked joint of charpoy IP folding up to 32mm dia x3mm thick by gas welding as per exising design and making good with one coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed by Engineer-in-Charge Drg FD-388(R)

M&L as in replacement of gusset duly riveted with pipe and legs and leg as per existing design with one coat of synthetic enamel paint over a coats of red oxide primer all as specified and directed by Engineer-in-Charge Drg FD-388®

S&F in replacement of Top of table computer MAP made from 18mm thick melamine shade pre-laminated particle board including 4mm thick TW edging duly polished all as specified on drawing. FD/E6/ MAP/03

S & F in replacement of key board fitted with telescopic channel MS drawer slides all shown on drawing . FD/E6/ MAP/03

Drawer with lock made out of 6mm thick plywood commercial face both side at bottom and 18mm thick pre-leminated particla board at side front and back FD/E6/ MAP/03

18mm thick prelaminated particle board pull out tray for mouse on telescopic channel FD/E6/ MAP/03

Shelf made out of 18mm thick prelaminated particle board FD/E6/ MAP/03

Side made out of 18mm thick pre-laminated particla board FD/E6/ MAP/03

Nylon buffers and PVC Shoes FD/E6/ MAP/03

Note : Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

vardhman traders