Tender ID

eTenders

Active

Works

Electrical Works

Re-Configuration of Existing Terminal Building at Raja Bhoj Airport, Bhopal (Phase-2). SH- HVAC Work.

Airports Authority of India

Raja Bhoj Airport | Bhopal, Madhya Pradesh

Amount: ₹1.8 CrCloses: 18 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published27 Oct 2026
Closes18 Nov 2026
Bid Opening19 Nov 2026

Tender Value

₹1.8 Cr

EMD Value

₹3.7 L

Closing Date

18 Nov 2026, 11:00 am

Tender Inviting Organisation

Name

SM (E-E)

Address

O/o Airport Director, Raja Bhoj Airport, Bhopal - 462036

Work Description

Re-Configuration of Existing Terminal Building at Raja Bhoj Airport, Bhopal (Phase-2). SH- HVAC Work.

Tender Information

Tender ID

2026_AAI_295696_1

Reference Number

AAI/BPL/ENGG(E)/NIT-08/2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Works

Location

Raja Bhoj Airport

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender Document.

Documents Required

20 documents required · 20 mandatory

Fee/PreQual/Technical

RequiredScan copy of Proof of online payment details against tender processing fee. (.pdf)

RequiredScan copy of Proof of online payment details against Earnest Money Deposit (EMD). (.pdf)

RequiredScan copy of Tender Acceptance letter as per NIT. (.pdf)

RequiredScan copy of PAN Card and GST Registration. (.pdf)

RequiredScanned copy of Valid Electrical License. (.pdf)

RequiredScan copy of affidavit of minimum wages on non-judicial stamp paper of Rs. 100/as per NIT. (.pdf)

RequiredScan copy of undertaking regarding blacklisting / debarring of firm as per NIT. (.pdf)

RequiredScanned copy of Plant and Machinery as per NIT. (.pdf)

RequiredScan copy of Power of Attorney or Authorization letter as per NIT. (.pdf)

RequiredScan copy of Valid EPF Registration as per NIT. (.pdf)

RequiredScan copy of Valid ESIC Registration as per NIT. (.pdf)

RequiredScanned copy of Form- A details of similar works completed during last seven years as per NIT. (.pdf)

RequiredScanned copy of Form- B Financial Information (Turnover) as per NIT. (.pdf)

RequiredScanned copy of duly signed Tender Form as per Page 2 to 3 of GCC. (.pdf)

RequiredScan copy of PQ Performa duly filled (Annexure PQ). (.pdf)

RequiredDuly digitally signed tender document. (.pdf)

RequiredScanned copy of duly signed Undertaking of LBS. (.pdf)

RequiredScan copy of work experience certificate as per NIT. (.pdf)

RequiredScan Copy of UDIN generated documents like Balance Sheet/ Turnover certificate, TDS Certificate. (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,120

EMD Fee Amount

₹3.7 L

Important Dates

Last Activity

27 Oct 2026

Published

27 Oct 2026

Bid Opening

19 Nov 2026

Download Starts

27 Oct 2026

Download Ends

18 Nov 2026

Submission Starts

27 Oct 2026

Clarification Period

27 Oct 2026 - 6 Nov 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (87 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying, installation, testing and commissioning of factory built, of double skin Horizontal floor mounted double skin type Air Handling Units with Chilled Water coil. The AHU housing shall be made of 48±2mm thick panels consisting of 0.8 mm thick galvanized pre- plasticised/powder coated sheet on outside and 0.63 mm thick plain GI sheet inside with polyurethane foam (PUF) 45±2 kg/m3 density insulation factory injected between them by injection moulding machine. AHU housing framing structure shall be thermal break structure type. The AHU shall have a fan section with Plug Fan, TEFC drive, IE-3 motor suitable for 215/415+ 10% volts, 1/3 phase 50 Hz AC supply, motor mounting arrangement inside the casings, stainless steel (18G) drain pan with PUF insulation, Coil section with ARI 410A compliant Cu Tube / Al finned 6 Row deep -12 FPI CHW coil, suitable for Chilled Water application, aluminium damper on the outlet of AHU, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, double fire retardant canvas connections and access doors to attend the motor/fan, etc. complete as per drawings and specifications. Filters shall have efficiency of 90 % down to 10 micron as per ASHRAE standard. AHU should be designed in such a way considering 20 to 30% clogged filters. The AHU without mixing box shall be complete in all respects .The motor shall be suitable for operation with VFD.
1.01	40000 CFM, 6RD Cooling Coil, Plug Fan, 65 mm SP	1	Each	-	-
1.02	35000 CFM, 6RD Cooling Coil, Plug Fan, 65 mm SP	2	Each	-	-
1.03	23000 CFM, 6RD Cooling Coil, Plug Fan, 65 mm SP	1	Each	-	-
1.04	6200 CFM, 6RD Cooling Coil, Plug Fan, 65 mm SP	1	Each	-	-
2Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / cum density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive complete including canvas cloth & Star Bond 30 - 36 complete and repairing of damage to building etc. required complete in all respect. as directed by EIC Note:-The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. Neccesary MS support as per the CPWD norms, shall be provided to cater the load of chilled water piping including all accessopries like walls, flanges etc
2.01	200 mm dia. (32 mm thick insulation) including 7ml with star bond	120	Meter	-	-
2.02	125 mm dia. (32 mm thick insulation) including 7ml with star bond	120	Meter	-	-
2.03	65 mm dia. (32 mm thick insulation) including 7ml with star bond	70	Meter	-	-
3Supply, installation, testing and commissioning U-PVC pipe with fittings of 10 kg /cm3. with 6mm thick Nitrile rubber of Class "1" including all fittings and jointing with solvent cement and , including cutting chieseling / holes in walls ,wherever required and making good the same, complete as directed by the Engineer in charge.

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.89 MB

Work Item Documents

tenderdocument.pdf

Tender Documents • 11.59 MB

BOQ_344719.xls

BOQ • 0.33 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying, installation, testing and commissioning of factory built, of double skin Horizontal floor mounted double skin type Air Handling Units with Chilled Water coil. The AHU housing shall be made of 48±2mm thick panels consisting of 0.8 mm thick galvanized pre- plasticised/powder coated sheet on outside and 0.63 mm thick plain GI sheet inside with polyurethane foam (PUF) 45±2 kg/m3 density insulation factory injected between them by injection moulding machine. AHU housing framing structure shall be thermal break structure type. The AHU shall have a fan section with Plug Fan, TEFC drive, IE-3 motor suitable for 215/415+ 10% volts, 1/3 phase 50 Hz AC supply, motor mounting arrangement inside the casings, stainless steel (18G) drain pan with PUF insulation, Coil section with ARI 410A compliant Cu Tube / Al finned 6 Row deep -12 FPI CHW coil, suitable for Chilled Water application, aluminium damper on the outlet of AHU, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, double fire retardant canvas connections and access doors to attend the motor/fan, etc. complete as per drawings and specifications. Filters shall have efficiency of 90 % down to 10 micron as per ASHRAE standard. AHU should be designed in such a way considering 20 to 30% clogged filters. The AHU without mixing box shall be complete in all respects .The motor shall be suitable for operation with VFD.
1.01	40000 CFM, 6RD Cooling Coil, Plug Fan, 65 mm SP	1	Each	-	-
1.02	35000 CFM, 6RD Cooling Coil, Plug Fan, 65 mm SP	2	Each	-	-
1.03	23000 CFM, 6RD Cooling Coil, Plug Fan, 65 mm SP	1	Each	-	-
1.04	6200 CFM, 6RD Cooling Coil, Plug Fan, 65 mm SP	1	Each	-	-
2Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / cum density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive complete including canvas cloth & Star Bond 30 - 36 complete and repairing of damage to building etc. required complete in all respect. as directed by EIC Note:-The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. Neccesary MS support as per the CPWD norms, shall be provided to cater the load of chilled water piping including all accessopries like walls, flanges etc
2.01	200 mm dia. (32 mm thick insulation) including 7ml with star bond	120	Meter	-	-
2.02	125 mm dia. (32 mm thick insulation) including 7ml with star bond	120	Meter	-	-
2.03	65 mm dia. (32 mm thick insulation) including 7ml with star bond	70	Meter	-	-
3Supply, installation, testing and commissioning U-PVC pipe with fittings of 10 kg /cm3. with 6mm thick Nitrile rubber of Class "1" including all fittings and jointing with solvent cement and , including cutting chieseling / holes in walls ,wherever required and making good the same, complete as directed by the Engineer in charge.

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Supplying, installation, testing and commissioning of factory built, of double skin Horizontal floor mounted double skin type Air Handling Units with Chilled Water coil. The AHU housing shall be made of 48±2mm thick panels consisting of 0.8 mm thick galvanized pre- plasticised/powder coated sheet on outside and 0.63 mm thick plain GI sheet inside with polyurethane foam (PUF) 45±2 kg/m3 density insulation factory injected between them by injection moulding machine. AHU housing framing structure shall be thermal break structure type. The AHU shall have a fan section with Plug Fan, TEFC drive, IE-3 motor suitable for 215/415+ 10% volts, 1/3 phase 50 Hz AC supply, motor mounting arrangement inside the casings, stainless steel (18G) drain pan with PUF insulation, Coil section with ARI 410A compliant Cu Tube / Al finned 6 Row deep -12 FPI CHW coil, suitable for Chilled Water application, aluminium damper on the outlet of AHU, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, double fire retardant canvas connections and access doors to attend the motor/fan, etc. complete as per drawings and specifications. Filters shall have efficiency of 90 % down to 10 micron as per ASHRAE standard. AHU should be designed in such a way considering 20 to 30% clogged filters. The AHU without mixing box shall be complete in all respects .The motor shall be suitable for operation with VFD.

1.01

40000 CFM, 6RD Cooling Coil, Plug Fan, 65 mm SP

Each

1.02

35000 CFM, 6RD Cooling Coil, Plug Fan, 65 mm SP

Each

1.03

23000 CFM, 6RD Cooling Coil, Plug Fan, 65 mm SP

Each

1.04

6200 CFM, 6RD Cooling Coil, Plug Fan, 65 mm SP

Each

2Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / cum density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive complete including canvas cloth & Star Bond 30 - 36 complete and repairing of damage to building etc. required complete in all respect. as directed by EIC Note:-The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. Neccesary MS support as per the CPWD norms, shall be provided to cater the load of chilled water piping including all accessopries like walls, flanges etc

2.01

200 mm dia. (32 mm thick insulation) including 7ml with star bond

120

Meter

2.02

125 mm dia. (32 mm thick insulation) including 7ml with star bond

120

Meter

2.03

65 mm dia. (32 mm thick insulation) including 7ml with star bond

Meter

3Supply, installation, testing and commissioning U-PVC pipe with fittings of 10 kg /cm3. with 6mm thick Nitrile rubber of Class "1" including all fittings and jointing with solvent cement and , including cutting chieseling / holes in walls ,wherever required and making good the same, complete as directed by the Engineer in charge.