Purchase of Equipments ( S.No 1 to s.No 5 ) for Civil Department

SAND REPLACEMENT TEST APPARATUS • Metal Tray / Base PlateSquare metal tray with a central hole (e.g., 300 mm × 300mm with 100 mm hole). • Another common size: 450 mm square, 50 mm deep with 200 mm central hole for larger kits Seamless steel cylinder with no sharp edges. • Common size: 100 mm internal diameter, 127–175 mm length (varies by kit). mkpequipments.com +1Wall thickness ~3 mm (industrial products) • Common size: 100 mm internal diameter, 127–175 mm length (varies by kit). � mkpequipments.com +1 Wall thickness ~3 mm (industrial products)

CORE CUTTER • AIM 161 Model Core Cutter: Seamless steel tube (typically 100mm ID, 130mm height, 3mm wall thickness). • Steel Dolly: 25mm high, 100mm ID, to prevent damage while driving. • Steel Rammer: For driving the cutter. • Tools: Spade, straight edge (knife), moisture containers.

SLUMP CONE APPARATUS • 300MM HT, BOTTOM DIA 200MM, TOP DIA 100MM WITH Base plate and tamping rod material make : Mild steel

JAR TEST APPARATUS • Uniform stirring of up to 6 samples simultaneously. Stirring rods should be adjusted individually during mixing • Digital display which should clearly indicate the speed of rotational variable speed 1-200RPM. Heavy duty 1/20HP motor with gear train mounted on a mild steel housing. • Stainless steel stirring paddlers with adjustable height. Paddles to be driven by electronically controller variable speed. • Locking collars or stirring rods permit adjustment height of paddle height. • Spacing of 6' (150mm) between stirring rods so as to permit use up to 1000ml beaker. • The digital timer to be set to count down from 1 to 99 minutes. • Housing Material: CRC / MS sheet duly powder coated. • Power Consumption : 220/230V AC supply 50HZ single phase • Motor : 1/ 20HP Motor good quality Illumination : Built in illuminator • Beaker : 6 nos 1000 ml beaker 1

COMPRESSION TESTING MACHINE 1000KN CAPACITY • Capacity: 1000 kN • Type: Hydraulic,floor-mounted • Accuracy: ±1% of indicated load • Load Application:Smooth, uniform, controlled • Platens:Hardened steel platens, suitable for concrete cubes/cylinders • Safety:Overload protection, pressure relief valve, emergency stop, safety guard • Standards: IS 516 / ASTM / ISO Compliant • Power Supply: 415 V, 3-phase, 50 Hz • Accessories: Platens,spacers, pressure gauge, operating manual • Calibration: Factory calibrated with certificate • Installation & Training: Included