Labour Works contract for Newly proposed 11KV Natham Feeder Bay extension electrical work at 33KV Bandikavanoor SS under RDSS scheme in respect of Bandikavanoor Section in Tiruvallur division through E-Tendering.

Supply, Transport, Loading and Unloading, galvanizing of MS Channel (125x65/100x50) MS Angle to the site including cost of material, labour, lead, lift etc., complete as directed by the department engineer at site.

Supply, Transport, Loading and Unloading of MS Flat (65x10 / 50x8) to the site including cost of material, labour, lead, lift etc., complete as directed by the department engineer at site.

Labour for erection of Light section structure ( Sec. wt below 14 kg/m)

Labour for erection of 11KV VCB CB with own crane arrangement and connecting link rod & other consumables, & as directed by the field Engineer.

Labour charges for erection of 11KV CT,PT(One 1Ph or 3Ph unit) using manual labour or crane by own arrangement

Labour charges for erection of CT,PT junction box including fabrication of clamp

Labour for erection of AB Switch 11 KV without earth hand operated

Labour for erection of Distribution type 11KV LAS including fabrication of base if required

Labour for Erection of Panel/Battery Charger Simplex indoor/outdoor

Labour for stringing of strung bus including hoisting of insulators 11KV strung bus single zebra conductor(1 span 3 runs).

Labour for erection of bus bar Using 50mm with making required bends

Labour for providing of jumpers and droppers.

Labour, Machineries, Consumables for fabrication and erection of earth spike.

Labour, Machineries, Consumables for erection of earthmat and earth raiser

Labour for excavation and refilling of trench of ave.width of 0.3M and ave.depth of 0.8M for earthmat and and ave.depth of 0.4M for laying of cable below fixed yard level and of any size as required by field engineer.

Labour for laying of cable in duct / trench including the cost of Alu. tag for identification Upto 8 core

Labour for laying of cable in duct / trench including the cost of Alu. tag for identification above 8 core

Labour for laying of cable& Clamping in structure

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer 19 mm

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer 25mm

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer 28mm

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer 32mm

Supply and termination of cable core end including cost of cable socket (Lugs), ferrules straps etc as per cable schedule and as directed by the field engineer.

Labour for providing cable core end termination

Two coat of aluminum paint to all M.S items including cost of paint brush and consumable

Labour charges for painting of Green enamel paint on all kind of structure earthing including removal of dust, rust using wire brush and painting brush etc.

Supply of Switch end clamp for 2" Bus

Supply of Switch end clamp for Mink/Kundah/Panther

Supply of `T`Clamp for zebra to zebra

Supply of `T`Clamp for 50 mm bus to zebra

Supply of 2" Free end

Supply of 2" Seating block

Supply of Corona bell for 50 mm bus bar

Supply of Reducer clamp for 50 mm Bus to Zebra