REPAIR/ REPLACEMENT OF UNSV POINT WIRING, MODULAR FITTINGS AND FIXTURE, LED LIGHTINGS, AREA LIGHTINGS, STREET LIGHTS WORK, REPLACEMENT OF LT CABLES, POLES OTHER MISC E/M WORKS AT CGDA HQ AND CENTRAD COMPLEX UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down carefully copper/ aluminium point wiring (Light, fan, socket, power and Bell) complete, including unscrewing from board out let boxes, fitting and fixtures such as switches, sockets, ceiling roses, lamp, holder , brackets, ceiling/wall light fittings and regulators etc and making good disturbed surface of walls, floors, etc. complete all as specified and as directed.

Taking down of existing Sub main wiring any size complete all as specified and directed.

Taking down of MCB VTPN,TPN, DB 4way/8way/12way including mcb sp and spn and making good of wall complete all as specified and directed.

Taking down, shifting and refixing carefully copper/ aluminium point wiring (Light, fan, socket, power and Bell), including unscrewing from board out let boxes, fitting and fixtures such as switches, sockets, ceiling roses, lamp, holder brackets, ceiling/wall light fittings and regulators etc and making good disturbed surface of walls, floors, etc. complete all as specified and as directed. Note : - Quoted Rates shall be inclusive of supply and fixing up to 1.5 metre Casing capping, suitable size of copper wire, same as existing wire, sunken type pressed steel terminal boxes of required size with 3mm thick Bakelite steel white/coloured top cover, for extension of point wiring.

M&L for point wiring with PVC insulated and unsheathed cable 1.5 Sqmm (nominal area) ISI marked multi-stranded copper conductor single core including 20mm dia medium grade PVC conduit concealed in wall / false ceiling, modular metal flush terminal boxes with cover plate & frame of required module and colour with all accessories including 1.50 Sq mm PVC insulated and unsheathed stranded copper wire conductor cable to common earth and connecting to earth dolly including colour coding of cable shall be phase- Red, Neutral-Black and earth- Green complete all as specified and directed.

One light/fan point, controlled by one switch, 5 Amps, one way, single pole.

One bell point controlled by one switch, 5 Amps, one way, single pole.

One 3 Pin, socket out let, 5 Amps, on the same board.

One 3 pin, socket out let, 5 Amps, on the independent board.

M&L for point wiring with PVC insulated and unsheathed cable 2.5 Sqmm (Nominal area) ISI marked stranded copper conductor single core including 20 mm dia medium grade PVC conduit for point wiring, concealed in wall /false ceiling modular metal flush terminal boxes cover plate with frame of required module and colour with all accessories including 2.5 Sqmm PVC insulated and unsheathed stranded copper wire conductor cable to common earth and connecting to earth dolly for one 5 pin, 15 Amps switch socket out let point on an independent board including colour coding of cable shall be Phase- Red, Neutral- Black and Earth- Green complete all as specified and directed.

M&L for point wiring with PVC insulated and unsheathed cable 4 Sqmm (Nominal area) stranded copper conductor single core including ISI marked 20 mm dia medium grade PVC conduit for point wiring, concealed in wall /, galvanised steel concealed terminal boxes not less than 1.6 mm thick of required size with top cover 3 mm thick of plastic laminated sheet (Hylum) of required colour with all accessories including 2.5 Sqmm PVC insulated and unsheathed stranded copper wire conductor cable to common earth and connecting to earth dolly for one 5 pin, 15 Amps switch socket out let point on an independent board including colour coding of cable shall be Phase- Red, Neutral- Black and Earth- Green complete all as specified and directed by Engr-in-charge.

S&F Modular switch, one way, 6/10 Amp, 230 Volts, 1 module complete all as specified and as directed. Make : Anchor Roma 66101 or equivalent Model of Make mentioned in PS.

S&F Modular switch, 16/20 Amp, 230 Volts, 1 module complete all as specified and as directed. Make : Anchor Roma 66104 or equivalent Model of Make mentioned in PS.

S&F Modular socket, out let 6/10 Amp, 230 Volts, 2&3 pin, combined, 2 module complete all as specified and as directed. Make : Anchor Roma 66403 or equivalent Model of Make mentioned in PS.

S&F Modular socket, out let 16/20 Amp, 230 Volts, 2&3 pin, combined, 2 module complete all as specified and as directed. Make : Anchor Roma 66405 or equivalent Model of Make mentioned in PS.

S&F Modular bell push, 6 Amps,1 Module, flush type complete all as specified and as directed.

S&F single pole and neutral enclosure with a 2 pin plug and socket with one MCB 20 Amp complete all as specified and directed by Engr-in-charge. Make : L&T/Schneider/Legrand

S&F Modular white, cover plate with frame, 1 module complete all as specified and as directed. Make : Anchor Roma 66901WH or equivalent Model of Make mentioned in PS.

S&F Modular white, cover plate with frame, 2 module complete all as specified and as directed. Make : Anchor Roma 66902WH or equivalent Model of Make mentioned in PS.

S&F Modular white, cover plate with frame, 3 module complete all as specified and as directed. Make : Anchor Roma 66903WH or equivalent Model of Make mentioned in PS.

S&F Modular white, cover plate with frame, 4 module complete all as specified and as directed. Make : Anchor Roma 66904WH or equivalent Model of Make mentioned in PS.

S&F Modular white, cover plate with frame, 6 module complete all as specified and as directed. Make : Anchor Roma 66906WH or equivalent Model of Make mentioned in PS.

S&F Modular white, cover plate with frame, 8 module complete all as specified and as directed. Make : Anchor Roma 66908WH or equivalent Model of Make mentioned in PS.

S&F Modular white, blank plate, 1 module complete all as specified and as directed. Make : Anchor Roma 66604 or equivalent Model of Make mentioned in PS.

S&F Modular white, blank plate, 2 module complete all as specified and as directed. Make : Anchor Roma 66644 or equivalent Model of Make mentioned in PS.

S&F Modular white, step Fan regulator, 120 watt, 2 module complete all as specified and as directed. Make : Anchor Roma 66503 or equivalent Model of Make mentioned in PS.

S&F bell, multi music type, AC, 230V complete all as specified and as directed.

S&F Modular white, RJ11, telephone Jack, single with shutter, 1 module complete all as specified and as directed. Make : Anchor Roma 66551 or equivalent Model of Make mentioned in PS.

S&F in replacement switch piano flush type, 230 Volts, 5 Amps, single pole complete all as specified and as directed.

S&F in replacement switch piano flush type, 230 Volts, 15 Amps, single pole complete all as specified and as directed.

S&F in replacement Socket outlet 3 pin, 6 A, flush type, 230 Volts complete all as specified and as directed.

S&F in replacement Switch socket combination, 5 in 1, 3 pin, 5 and 15 Amp, flush type universal, 230 Volts complete all as specified and as directed.

S&F in replacement Modular switch, one way, 6/10 Amp, 230 Volts, 1 module complete all as specified and as directed. Make : Anchor Roma 66101 or equivalent Model of Make mentioned in PS.

S&F in replacement Modular switch, 16/20 Amp, 230 Volts, 1 module complete all as specified and as directed. Make : Anchor Roma 66104 or equivalent Model of Make mentioned in PS.

S&F in replacement Modular socket, 6/10 Amp, 230 Volts, 2&3 pin, combined, 2 module complete all as specified and as directed. Make : Anchor Roma 66403 or equivalent Model of Make mentioned in PS.

S&F in replacement Modular socket, 16/20 Amp, 230 Volts, 2&3 pin, combined, 2 module complete all as specified and as directed. Make : Anchor Roma 66405 or equivalent Model of Make mentioned in PS.

S&F in replacement flexi bell, the wireless door bell with no interference including all accessories like remote and Batteries complete all as specified and as directed. Make : Anchor Model 22740 or equivalent Model of Make mentioned in PS.

S&F in replacement Modular white, TV socket outlet single, 1 module complete all as specified and as directed. Make : Anchor Roma 66602 or equivalent Model of Make mentioned in PS.

S&F in replacement uni Switch socket combination box, made by polycarbonate , with 2 fixing holes, 5 in 1, 3 pin, 20 Amps and 10 Amp, flush type universal, 240 Volts in white color complete all as specified and as directed. Make: Anchor PENTA Model 14616 or equivalent Model of Make mentioned in PS.

S&F in replacement 6 Amps, 3 pin, Super Plug top complete all as specified and as directed. Make: Anchor Model 39571/51348 or equivalent Model of Make mentioned in PS.

S&F in replacement 16 Amps, 3 pin, Super Plug top complete all as specified and as directed. Make: Anchor Model 39582/51395 or equivalent Model of Make mentioned in PS.

S&F in replacement Brass lamp holder (batten type/ pendent type/Brass Back plate Lamp Holder/Burfi holder etc), base cap B22/E-14/E-27 as required at site complete all as specified and as directed.

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge. Make- anchor or equivalent.

S&F in replacement 6/10/13 Amps, Spike Guard, with 4 Nos sockets controlled by single switch, indicator and overload protection, voltage Surge protection, moulded plug confirming to ISI requirement, with 4 Metre, 3 core, 2.5 Sqmm insulated wire, versatile socket compatible with multi plug special slot to hang product vertical. Make Anchor Cat No 22670/22648/22048 or equivalent Model of Make mentioned in PS.

S & F factory made epoxy powder coated Distribution Board, conforming to IS: 8623, TP & N 8 ways (VTPN MCCB DB) with metal door (IP-42 protection ) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with Knockouts and suitable for one FP-MCCB 100/125 Amp as incomer and 12/24/36 SP MCBs or 32/63 TPN MCBs ( or any combination of SP/TP MCBs ) outgoings complete all as specified and directed Note: (a) MCCB/MCBs shall be measured and paid separately. (b) All cables terminating into MCCBs /MCBs/RCBOs shall be connected by using suitable Copper lugs/thimbles/sleeves and its cost shall be deemed to be included in the rate Quoted.

S&F MCB DB sheet enclosure,Double door type, TPN 8 way ( triple pole and neutral ) 415 V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete conforming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed.

S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete conforming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 4 way complete all as specified and directed.

S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete conforming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed.

S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete conforming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 12 way complete all as specified and directed.

Supply and fixing in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.

Supply and fixing in replacement MCB SPN 240V, 10KA 'C' curve 32 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

Supply and fixing in replacement MCB SPN 240V, 10KA 'C' curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

S&F in replacement MCB Isolator, TPN, 415 Volts, 100 Amp suitable for existing Make and model complete all as specified and as directed.

S&F in replacement MCB Isolator, TPN, 415 Volts, 63 Amp suitable for existing Make and model complete all as specified and as directed.

S&F in replacement MCB TP, 415 Volts, 63 Amp suitable for existing Make and model complete all as specified and as directed.

S&F in replacement MCB TP, 415 Volts, 100 Amp suitable for existing Make and model complete all as specified and as directed.

S&F in replacement MCCB, TPN, 100 Amps, 415 Volts, breaking capacity 16 KA complete all as specified and as directed.

S&F in replacement MCCB, TPN, 125 Amps, 415 Volts, breaking capacity 16 KA complete all as specified and as directed.

S&F in replacement MCCB, 4 Pole, 160 Amps, 415 Volts, breaking capacity 36 KA complete all as specified and as directed.

S&F in replacement MCCB, 4 Pole, 200 Amps, 415 Volts, breaking capacity 36 KA complete all as specified and as directed.

M&L for submain wiring with two single core 10.00 Sqmm stranded copper conductor PVC insulated and unsheathed cable FRLS ISI marked drawn in 25mm dia, medium grade, PVC conduit concealed in wall for sub main connection including 6.00 Sqmm FRLS PVC insulated unsheathed copper conductor ISI marked as earth wire complete all as specified and directed by Engr-in-charge.

M&L for submain wiring with two single core 6.00 Sqmm stranded copper conductor PVC insulated and unsheathed cable FRLS ISI marked drawn in 25mm dia, medium grade, PVC conduit concealed in wall for sub main connection including 4.00 Sqmm FRLS PVC insulated unsheathed copper conductor ISI marked as earth wire complete all as specified and directed by Engr-in-charge.

S&F in replacement Power saving LED light fitting, 10 Watt, 6500 K, cool day light, 2 feet (Approx), 230 Volt complete all as specified and as directed. Make: Havells Cat No -LHEXACP7IN1W010 Led pride plus neo batten or equivalent Model of Make mentioned in PS.

S&F in replacement decorative ultra slim, round profile, LED light fitting, with extruded polycarbonate, environment friendly, energy Power saving, LED glow batten fitting light 20/22 Watt, 4 feet (Approx), 230 Volt complete all as specified and as directed. Make: Havells Cat Part No LHEXBLP7PN1W020 or equivalent Model of Make mentioned in PS.

S&F in replacement Power saving LED Colour changing Batten light fitting from warm white to natural white to cool white, 20/22 Watt, 4 feet (Approx),6500K, 230 Volts, change colour complete all as specified and as directed. Make- Havells cat part no LHEXAXPNIN1W020 Led pride plus triyca batten or equivalent Model of Make mentioned in PS.

S&F in replacement Crystal glass LED tubelight ,ultra bright, 20 Watt, 4 feet (Approx), 6500K, 230 Volts, with build in driver ,double side connection complete all as specified and as directed. Make- Havells cat part NO - CRYSTALT81213SSTL20WLED865SGLASS or equivalent Model of Make mentioned in PS.

S&F in replacement Surface mounting type, 15 Watt Aesthetically designed 1x1 LED flat Panel Full window glare free, opal Diffuser, LED Panel light fitting, size with MS Powder coated White Housing, total system Lumen of 15W, LED shall be 1200 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - PLUTO1X1PLR15WLED857S or equivalent Model of Makes Mentioned in PS.

S&F in replacement Surface mounting type, 42 Watt Aesthetically designed 2x2 LED flat Panel Full window glare free, opal Diffuser, LED Panel light fitting, size with MS Powder coated White Housing, total system Lumen of 36W, LED shall be 4000 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - PLUTONEO2X2PLR42WLED857S or equivalent Model of Makes Mentioned in PS.

S&F in replacement Surface mounting type, 36 Watt Aesthetically designed 1x4 LED flat Panel Full window glare free, opal Diffuser, LED Panel light fitting, size with MS Powder coated White Housing, total system Lumen of 36W, LED shall be 3800 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - PLUTONEO4X1PLR36WLED857S or equivalent Model of Makes Mentioned in PS.

S&F in replacement recessed type, 36 Watt, Full window glare free, opal Diffuser LED Panel light fitting (2'x2'), size 595X595mm, suitable for Existing false ceiling, with MS Powder coated White Housing, total system Lumen of 36W LED shall be 3000k or above in Cool day Light (3600K), Power factor>0.90, CRI (Ra) >80, System Lumen Efficacy>110 Lm/w, THD (%) < 10, LED Lamp Efficacy>140 Lm/W with Average life of 50000 Burning hours, Complete with all accessories as required with connections complete all as specified and as directed. Make- Orient Cat Part No.- LTRAQ-36-W-VO Led decorative luminaire 36W or equivalent Model of Makes Mentioned in PS

S&F in replacement recessed type, 15W LED Round Down light Panel including constant current Led driver with pressure die-cast aluminium heat sink & glare free opal Diffuser of size 190mm Dia (Approx) . Total system Lumen of 15W LED should be 1400 or above in Cool day Light (5700K), Power factor>0.90, CRI>80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - LHEWEKP7PL1W015 Edgepro LED Panel 15W round or equivalent Model of Makes Mentioned in PS.

S&F in replacement recessed type, 10 Watt LED Round Down light with pressure die-cast aluminium heat sink & glare free opal Diffuser of size 135 mm Dia (Approx) . Total system Lumen of 10 W LED should be 1200 or above in Cool day Light (2200k), Power factor>0.95, CRI>80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - EDGEPRONEORDDLR10WLED857S or equivalent Model of Makes Mentioned in PS.

S&F in replacement recessed type, 12 Watt LED Round Down light with pressure die-cast aluminium heat sink & glare free opal Diffuser of size 156 mm Dia (Approx) . Total system Lumen of 12 W LED should be 1500 or above in Cool day Light (2500k), Power factor>0.95, CRI>80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - EDGEPRONEORDDLR12WLED857S or equivalent Model of Makes Mentioned in PS.

S&F in replacement recessed type, 15 Watt LED Round Down light with pressure die-cast aluminium heat sink & glare free opal Diffuser of size 155 mm Dia (Approx) . Total system Lumen of 15 W LED should be 1800 or above in Cool day Light (2500k), Power factor>0.95, CRI>80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - EDGEPRONEORDDLR15WLED857S or equivalent Model of Makes Mentioned in PS.

S&F in replacement recessed type, 18 Watt LED Round Down light with pressure die-cast aluminium heat sink & glare free opal Diffuser of size 180 mm Dia (Approx) . Total system Lumen of 18 W LED should be 1900 or above in Cool day Light (3000k), Power factor>0.95, CRI>80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - EDGEPRONEORDDLR18WLED857S or equivalent Model of Makes Mentioned in PS.

S&F in replacement LED decorative, wall mounting, light fitting, with plastic body, suitable for B22 type LED lamp, with opal white, PC diffuser poetics for glair free light, including mounting brackets etc complete, including one No 9 Watt LED Lamp complete all as specified and as directed. Make:- Havells Cat part no - LHFOECE1TZ1O014 Stylo Wall Light 9W or equivalent Model of Makes Mentioned in PS.

Taking down ceiling fan/cabin fan/Duct fan of any sweep and dismantling fan blade, dismantling electric connection, removing capacitor, checking of bearings/bushes, cleaning the fan blades with clear water, scrapping the fan blades, placing the bearing, bush, capacitor, rewinding complete, re-assembling the ceiling fan complete including greasing, oiling, testing the same & making the fan serviceable and re-hanging and connecting with the ceiling rose complete all as specified and as directed. NOTE: rewinding, bush, bearing, capacitor, twin core, flexible cable shall be measured and paid for separately under respective item of this Schedule.

Description all as per item No 77 here in before but for exhaust fan 300/450 mm sweep, any type complete all as specified and as directed.

M&L in replacement Re-winding of ceiling fan motor of any type and size, using copper winding wire of same as existing gauge including replacement of insulated paper, varnishing, including cleaning/greasing, including removing old burnt wire complete all as specified and as directed.

Description all as per item No 79 here in before but for pedestal fan/cabin fan/duct fan, 350/400/450mm sweep, any type complete all as specified and as directed.

Description all as per item No 79 here in before but for exhaust fan 300/450mm sweep, any type complete all as specified and as directed.

Description all as per item No 79 here in before but for duct type exhaust fan, any type complete all as specified and as directed.

Supply only in repair ball bearing for 1200/1400mm sweep ceiling fan as required at site complete all as specified and as directed. Make:-SKF/TATA/FAG.

Supply only in repair ball bearing for 300/450mm sweep exhaust fan/duct fan as required at site complete all as specified and as directed. Make:-SKF/TATA/FAG.

Supply only in repair gun metal bush for 300/450mm sweep exhaust fan as duct fan required at site complete all as specified and as directed.

Supply only in repair rubber insulator Heavy duty with bolts nuts & split pin etc complete for 1400/1200mm sweep ceiling fan complete all as specified and as directed.

Supply & fix in replacement capacitor of 2.5 MFD for Ceiling/ Exhaust fan complete all as specified and as directed.

Supply & fix in replacement capacitor of 4 MFD for Ceiling/ Exhaust fan complete all as specified and as directed.

Supply only in repair down rod 12mm dia made out of high density mild steel 900mm long as per approved sample complete all as specified and as directed.

Supply only in replacement ceiling fan hanging clamps with rubber insulator and two Nos nuts and bolts complete all as directed.

S&F in replacement pedestal fan/cabin fan blades any sweep, suitable for existing fan complete all as specified and as directed.

S&F in replacement tuneable RGB smart bulb Leaves power to change the mood and the with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - LHLDAMED3W8R009 or equivalent Model of Makes Mentioned in PS.

S&F in replacement 6 Watt, LED capsule/LED GU 10 /GU10C /candle LED SES, E-14 small screw cap, 230 Volt or as required as per site requirement complete all as specified and as directed.

S&F in replacement LED Lamp, 0.5 Watt, 230 Volts complete all as specified and as directed.

S&F in replacement LED Lamp (bulb), 9 to 12 Watt, 230 Volts complete all as specified and as directed.

S&F in replacement LED Lamp(bulb) , 18 Watt, 230 Volts complete all as specified and as directed.

S&F in replacement PVC insulated, 1.50 Sqmm, single core, copper conductor, FRLS complete all as specified and as directed. Make- anchor/Havells or equivalent in PS.

S&F in replacement PVC insulated, 2.50 Sqmm, single core, copper conductor, FRLS complete all as specified and as directed. Make- anchor/Havells or equivalent in PS

S&F in replacement PVC insulated, 4.0 Sqmm, single core, copper conductor, FRLS complete all as specified and as directed.Make- anchor/Havells or equivalent in PS

S&F in replacement PVC insulated, 6.0 Sqmm, single core, copper conductor, FRLS complete all as specified and as directed. Make- anchor/Havells or equivalent in PS

S&F in replacement Pull Cord Switch or rotary Switch, 5 Amp, 250 Volt, one way, to ON and OFF the indicator lamps complete all as specified and as directed.

S&F in replacement, E-27/E-40, threaded lamp holder suitable for garden light fittings complete all as specified and as directed.

M&L for preparing old painted steel tubular poles, including cleaning the surface of poles by rubbing with emery Paper to remove oil stains, dust etc and applying two coat of existing colour synthetic enamel paint by spray paint to steel tubular pole of height above 7 Metre up to 11 metre, including cross arms, Bracket etc including writing Pole No on each pole with black paint on yellow circle complete all as specified and as directed.

M&L for preparing old painted steel tubular poles, including cleaning the surface of poles by rubbing with emery Paper to remove oil stains, dust etc and applying two coat of existing colour synthetic enamel paint by spray paint to steel tubular pole up to 7 metre height including cross arms, Bracket etc including writing Pole No on each pole with black paint on yellow circle complete all as specified and as directed.

S&F in replacement LED decorative post Top lantern, 25Watt, including all accessories, complete fixing accessories and clamp, including 4 metre height black painted glavanized pole, fixed in position including necessary PCC work and excavation as per manufacturer's instruction complete all as specified and as directed. Make:- CG, Cat Part No:- LPTSA-30-T or equivalent Model of Makes Mentioned in PS.

S&F in replacement LED decorative post Top lantern, 35Watt, including all accessories, complete fixing accessories and clamp, including 4 metre height black painted glavanized pole, fixed in position including necessary PCC work and excavation as per manufacturer's instruction complete all as specified and as directed. Make:- CG, Cat Part No:- LPTOI-45- CDL/T or equivalent Model of Makes Mentioned in PS.

S&F in replacement 72 Watt, New generation, energy saving and environmental friendly, long life, LED Street Light fitting, made out of pressure die cast aluminium housing, with high efficiency LEDs as lighting source and lens embedded PC cover having top Opening seperate driver compartment with IP66 protection and impact resistance of IK07, with toughened glass top cover, with 10KV Built-in Surge Protection Device complete all as specified and as directed. Make: Havells Cat Part No. - ENDURAOMNIPLUSSL72WLED757SASYTOPC or equivalent Model of Make mentioned in PS.

S&F in replacement 100 Watt, New generation, energy saving and environmental friendly, long life, LED Street Light fitting, made out of pressure die cast aluminium housing, with high efficiency LEDs as lighting source and lens embedded PC cover having top Opening seperate driver compartment with IP66 protection and impact resistance of IK07, with toughened glass top cover, with 10KV Built-in Surge Protection Device complete all as specified and as directed. Make: Havells Cat Part No. - ENDURAOMNIPLUSSL100WLED757SASYTOPC or equivalent Model of Make mentioned in PS.

S&F pole mounted junction box (Street light boxes) sliding type (Door fits to base by means of sliding) for 3 phase 4 wire lighting system, moulded in FRP including provision of 2 Nos MCB 16 Amps and bus bar insulator- 4 Nos with nut & bolts with fixing arrangement, outdoor type of dimensions 345 x 250 x 150 mm ( H x W x D) complete all as specified and directed.

S&F in replacement Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium, flood light, 50 Watt, IP66, with high power LEDs as light source, complete with all related accessories and Wall or surface mounting using adjustable MS bracket with screws complete including connecting to Electric supply complete all as specified and as directed. Make: Havells, Cat Part No. - JETAADORNFLS50WLED757SSYMTOTG or equivalent Model of Make mentioned in PS.

S&F in replacement Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium, flood light, 80 Watt, IP66, with high power LEDs as light source, complete with all related accessories and Wall or surface mounting using adjustable MS bracket with screws complete including connecting to Electric supply complete all as specified and as directed. Make: Havells, Cat Part No. - JETAADORNFLS80WLED757SSYMTOTG or equivalent Model of Make mentioned in PS.

S&F in replacement Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium, flood light, 100 Watt, IP66, with high power LEDs as light source, complete with all related accessories and Wall or surface mounting using adjustable MS bracket with screws complete including connecting to Electric supply complete all as specified and as directed. Make: Havells, Cat Part No. -JETAADORNFLS100WLED757SSYMTOTG or equivalent Model of Make mentioned in PS.

S&F in replacement Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium, flood light, 150 Watt, IP66, with high power LEDs as light source, complete with all related accessories and Wall or surface mounting using adjustable MS bracket with screws complete including connecting to Electric supply complete all as specified and as directed. Make: Havells, Cat Part No. - JETAADORNFLS150WLED757SSYMTOTG or equivalent Model of Make mentioned in PS.

S&F in replacement RGB LED flood light 150 Watt, IP66, with high power LEDs as light source, complete with all related accessories and Wall or surface mounting using adjustable MS bracket with screws complete including connecting to Electric supply complete all as specified and as directed. Make: Halonix Model No. - HLFLD-ML22-150-RGB or equivalent Model of Make mentioned in PS.

S&F in replacement Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium, flood light, 200 Watt, IP66, with high power LEDs as light source, complete with all related accessories and Wall or surface mounting using adjustable MS bracket with screws complete including connecting to Electric supply complete all as specified and as directed. Make: Havells, Cat Part No. - JETA VALOURFL200WLED757PINTWBLTG or equivalent Model of Make mentioned in PS.

S&F in replacement LED flood Light fitting 250 watt, system efficiency not less than 100 lumen / watt, IP66protection, consisting of high/ low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on bracket/ Channel & connecting, i complete. Make:- Cat No JETAIRSALPHAFL250WLED757APLTG in Havells or equivalent model of make/ CG/ Philips makes mentioned in PS.

S&F in replacement Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium, flood light, 300 Watt, IP66, with high power LEDs as light source, complete with all related accessories and Wall or surface mounting using adjustable MS bracket with screws complete including connecting to Electric supply complete all as specified and as directed. Make: Havells, Cat Part No. - JETAVALOURLEFL300W2MLED757PINTNMBLTG or equivalent Model of Make mentioned in PS.

S&F in replacement Black aluminium outdoor, wall light, with tempered glass, with B22 holder and plug, including 9 Watt LED Lamp, including all accessories suitable for Decorative Gate lighting to match with the existing light complete all as specified and as directed.

Supply only DHPP 'N' for running DG sets installed at Power House of CGDA complex and CENTRAD from nearest Petrol Pump complete all as specified & as directed. Note: 1. The DHPP 'N' stock shall be maintained at least 2000 Litre within 15 days from date of commencement of work and further shall be top up as per requirement basis and as directed by Engineer-in-Charge. A damage of Rs 1000.00 per day shall be imposed on the contractor, if minimum stock levels are not maintained within 24 Hours of demand raised by Engineer in Charge. Strict compliance shall be ensured to avoid failure of standby supply due to non availability of DHPP 'N'. 2. Transportation cost for carrying diesel from petrol pumps to CGDA complex & CENTRAD included in quoted rates. 3. Labour for loading & unloading & transporation for lifting empty barell from sites and drop barrel after filling from petrol pump for above mentioned sites shall include in quoted rates by the contractor. Note : Contractor shall submitt original bill from the authorised petrol pump station while claming RAR/ Bill.

Supply only metal storage barrell of 200 litres capacity for carrying and storage diesel for dg set at CGDA and Centrad as directed & specified by Engr-in-charge.Note- Storage barrel should paint by blue colour high quality paint after primer paint complete & mentioning name CGDA & CENTRAD on barrels with white colour.

Supply only fuel lifting pump from barrel, rotary manual operated by hand complete all as specified & directed.

S&F in repair digital Voltage Stabilizer of capacity 1 KVA for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of +2.5% complete all as specified and directed. Make: V-Guard Model No :- VGSD 50 or equivalent model of Bluebird, Emerson

S&F in repair digital Voltage Stabilizer of capacity 2 KVA for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of + 2.5% complete all as specified and directed. Make: V-Guard model No VGSD 100 or equivalent model of Bluebird, Emerson

S&F in repair digital Voltage Stabilizer of capacity 4 KVA for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of + 2.5% complete all as specified and directed. Make: V-Guard/ Bluebird /Emerson

S & F in replacement PVC body Exhaust air ventilator , 250 mm sweep ,1200 RPM, 5 blade, off white, 240 Volt, with louver shutter, including necessary connection with flexible PVC Copper cable, 3 core, size 1.5 Sqmm of length from ceiling rose to exhaust fan including nut bolt and washers of suitable size complete all as specified and as directed.

Taking down the geyser from its existing position for general cleaning/overhauling, cleaning and descaling the tank and assembly with suitable detergent and making fully serviceable (the item required for serviceability shall be measured in respective Sch 'A' item mentioned hereafter) and refixing in new/old position complete with testing all as specified and as directed.

Supply only in replacement of fusible plug type (pressure valve) Air release valve.

Supply only in replacement air release valve (Nozzle) all as spec ified as per sample.

Supply only in replacement gasket of thickness 5 mm for geyser assembly of 06 holes/ 08 holes / 09 holes all as specified and as directed.

Supply only in replacement Syphen assembly of copper, 06/ 08/ 09 holes with nut bolts/slud/washer all as specified and as directed.

Supply only in replacement of indicating lamp for geyser rectangular type/round type.

Supply only in replacement of CP angle valve of size 15 mm dia Make- Hindware/ Parko/ CERA.

Supply only in replacement industrial type metal clad socket only of 20 Amps Make- Anchor/Havells/Standard

Supply only in replacement of metal clad top 20 Amp Make- Anchor/Havells/Standard

Supply only in replacement inner shell of Geyser of cap 25 Ltr made out of stainless steel tank complete all as specified.

Description all as per Srl item No 135 here in before but 35 Ltr Cap.

Description all as per Srl item No 135 here in before but 50 Ltr Cap.

S&F fastner mild steel 150 mm long x 10 mm dia with pin and bolts complete for hanging of geyser properly on wall and making good to the disturbed surfaces including plastering and white washing all as directed.

Taking down geyser from existing location for preparation of body of geyser by knotting and stopping of outer surface, repainting the complete outer surface of geyser with one coat of synthetic enamelled paint 1st quality Make- Berger/Asian and refixing the same on wall in existing location and writing "GE East" of letter size 10 mm all as directed.

S&F in replacement GI tubing medium grade laid in floor/roof including all GI fittings and cutting the existing pipe and making connection with new pipe including proper clamping with MS hooks all as specified & directed of size 15 mm dia bore. Make- TATA/JINDAL/BST

Unscrew the nutbolt and taking out the base plate geyser assembly and copper tank making soldering and brazing of tank to stop the leakage of tank and fixing back in the position of geyser.

Supply only outer body of Geyser Cap 25/ 35/ 50 Ltr of 20 SWG MS Sheet duly painted all as specified.

Supply only in replacement PVC connection heavy duty of ss body and ss nut for hot/cold water of size 15mm x 600 mm long . Make- Prayag/ Polytub/DASPASS.(Note- Set of two)

Supply only in replacement PVC connection heavy duty of ss body and ss nut for hot/cold water of size 15mm x 450 mm long . Make- Prayag/ Polytub/DASPASS.(Note- Set of two)

Supply only in replacement of CP concealed Stop cock 15 mm dia Make- Hindware/ Parko/ CERA.

Supply only in replacement chromium plated bib tap standered 15 mm dia Make- Zim Cat No 1511 or equivalent in Parko

Supply only in replacement chromium plated bib tap standered 20 mm dia Make- Zim Cat No 1511 or equivalent in Parko

Supply only in replacement chromium plated extension nipple of size 15 mm dia (as per sample)

Supply only in replacement thermostat switch of gysers (adjustable type) Make- THEETA/BAJAJ/RECOLD/DASPASS for temp range.

Supply only in replacement heating element 1.5 KW (round type) with rubber gasket Make-Theeta/Bajaj/Recold/DASPASS (as per sample)

Description all as per item No. 150 here in before but round type type 2 KW (as per sample)

Description all as per item No. 150 here in before but triangle type 1.5 KW (as per sample)

Description all as per item No. 150 here in before but triangle type 2 KW (as per sample)

Supply only in replacement of Angle valve 2 in 1 of 15 mm dia (Setila) Cat No. 1003A Make-Zim/ Parko)

S&F in replacement 5 star rated vertical mounted Water heater geyser, of capacity 25ltrs having dimensions 360x380x515 mm. Features: outer body-ABS, Safety feature-Multi function safety valve, thermostat, thermal cutout, viterous enameled glass line tank with CRCA outer body with powder coated with heavy duty anode rod prevent from corrosion & permanent scaling with adjustable knob for temp setting between 30°C to 75°C, high density PUF for thermal insulation with LED power indication.Technical specifications: voltage-230V, Type-storage, Frequency-50Hz, Wattage- 2 Kilo Watts, Pressure-8 Bar, Pressure Class- Class 1.

Supply only in replacement Geyser Installation Kit, Suitable for all kinds of water heaters / Geysers, 1 Litres to 100 Litres, Kit Includes 2 Nos ( or 1 Pair) of flexible Connection Pipes Premium Steel Ribbed, Bolts (Coach Screws) & washers / Connection Nipple / 15A Plug / Teflon Tape / Angle Valve Brass etc complete all as specified and as directed.

S&F in replacement Flykiller metal type (65x21.5x35)cm 15 watt 03 nos tube, fully automatic on 230V, AC, 50 HZ complete all as specified and as directed. Make V Guard/ Havells/ Bajaj.

S&F in replacement Hot air blower, Heat convector, 2 KW capacity, with blower and temp control mechanism and indications, operating on 230V, AC, 50 HZ complete all as specified and as directed. Make : Usha Model No 812T Black or equivalent model of V Guard/ Havells/ Bajaj.

S&F in replacement Heat Pillar (Portable Heaters), Mild steel body, 1500 Watts, with twin quartz tube for direct heating, safety tip over switch cuts off the heater in case it is tilts or falls, two heat setting (400 Watt/800 Watts) for maintaining desired room temperature, powder coated finish to prevent corrosion, operating on 230 Volts, AC, 50 Hzs complete all as specified and as directed.

S&F in replacement Automatic Hand Dryer with Heating element and Hot/Cold Switch and with the following specifications : Body Material : ABS Plastic (White), Finish : white, Mounting : Wall Mounting, Operation : Fully Automatic, Motor : Brush AC type, Power : 1000W, Voltage : 220V/50Hz, Current : 0.9A, Water Splash Proof : IPX1, Blowing Volume : 90 Cum/Hour, Time Protection : 60 Seconds auto cut-off, Sensing Range : 20cm +/‐ 5cm, Air Speed : 35 +/- 2 m/s, 18000RPM, Drying Time : >20 Sec, Noise Level : 75DB, Dimension : 255x145x130mm complete all as specified and as directed. Make: EURONICS or equivalant. Note: Old Hand dryer shall be deposited by the contractor in MES Store Yard.

S&F in replacement 4 Watt 5000K white DESKLITE SLEEK WITH ADJUSTABLE LAMP SHADE AND CONNECTING ROD WITH FLEXIBLE TURNING MANUAL SWITCH with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - LHEXBVP7SN1W005 or equivalent Model of Makes Mentioned in PS.

S&F in replacement 7.5 Watt A60 LED Filament Lamp Black Decorative surface mounting dome shaped pendant in green & black finisheswith all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No -LHFHDPE1TN1K020 or equivalent Model of Makes Mentioned in PS.

Supply only drilling machine, hammer drill for electric works 720 watt ,electric rotary hammer with SDS plus ,three modes applicable for concrete,metal & wood including drill bits with carrying case complete all as specified & directed. Make - bosch GBH or equivalent.

M&L for dismantling of all components from GI body evaporative cooler (desert cooler) metal body very carefully viz exhaust fan, water pump, grass pad, water distribution line etc with and including preparation of exterior and interior portion on cooler to a smooth finish and applying one coat of bituminous paint and reassembling the same in the cooler for smooth running complete all as directed. Note:- If any worn out items noticed during reassembling the same shall be measured and paid separately .

S&F in replacement GI Fan blade suitable for desert cooler as per existing

S&F in replacement ,Suitable for desert cooler, PVC connection set of three complete as existing.

S&F in replacement, suitable for desert cooler, 3 core flexible copper conductor cable of size 0.5 Sqmm.

S&F in replacement Grass pad set of 3 pads superior quality ,weight of each set not less than 0.50 kg.

S&F in replacement Front grill of suitable size 4'x4' suiatable for Existing desert cooler

S&F in replacement Fan motor single phase 50 Hz 230V AC max Amp 1.5 as existing Make:- BAJAJ/COOL WORLD

S&F in replacement Water submersible pump 240V AC 50 Hz 10W 5 LPM 2 mtr head. Make:- Bajaj/Cool world.

S&F in replacement ON-OFF switch 5 Amp 240V for water pump.

S&F in replacement Mounting bracket for fan motor with nut & bolt etc. as existing.

S&F replacement Capacitor 4 Mfd + 5% 440V MPP ‘SH’.

S&F in replacement GI shutters suitable for cooler 4’ x 4’.

S&F in replacement Industrial motor suitable for 24 sweep fan. Make:- BAJAJ/COOL WORLD

Electronic water level indicator (LED type showing three level).

M&L for dismantling of all components from Plastic body evaporative cooler (desert cooler) metal body very carefully viz exhaust fan, water pump, grass pad, water distribution line etc with and cleaning the complete body and storage water tank and reassembling the same in the cooler for smooth running complete all as directed. Note:- If any worn out items noticed during reassembling the same shall be measured and paid separately .

S&F in replacement Fan main motor copper winding single phase 50 Hz 230V AC 107 watt Heavy Body Motor, 1330 RPM,max Amp 1.5 as per existing, Make:- BAJAJ/Symhony/Usha/Kenstar

S&F in replacement Air cooler swing motor Ac 220-240 V, 3 RPM 4watt, 50 Hz, Torque 4Kgf/Cm Shaft Rotation Make:- BAJAJ/Symhony/Usha/Kenstar

S&F in replacement Air cooler Dura Pump Ac 220-240 V, 14 watt, 50 Hz. Make:- BAJAJ/Symhony/Usha/Kenstar

S&F in replacement Air cooler PCB Ac 220-240 V. Make:- BAJAJ/Symhony/Usha/Kenstar

S&F in replacement Air cooler 6 Blade Ac 220-240 V. Make:- BAJAJ/Symhony/Usha/Kenstar

supply and fix in replacement ventilation fan heavy duty 450mm sweep,1400 RPM,350 Watt,wall mount complete all as specified & directed. Make -Crompton/ Bajaj/ USHA or any make mentioned in PS.

Material & labour for replacement LED Alphabets lighting Board of CGDA & CENTRAD , made out of 18 SWG 304 Grade Stainless Steel Profile Bending / Cutting by CNC Fully Automatic machine & 3mm Acrylic Sheet, repair any defect in board LED letters, wiring , Complete all as specified & directed by Engineer‐In‐Charge.

Saini Enterprises (BID ID -3511878)

SANJEEV ENTERPRISES (BID ID -3511786)

sony engineering works (BID ID -3512863)

Jai Mahakaal Construction (BID ID -3508597)

R R Associates (BID ID -3510490)

M/S Rohit Enterprises (BID ID -3512653)

ASHUTOSH BUILDERS (BID ID -3512834)

M/s Sohanil Construction (BID ID -3512474)