REPAIRS / MAINT OF INTERNAL ELECTRIFICATION WORKS AT ZONE-II, ZONE-IIII AND ZONE VI AND REPAIR / MAINT OF CEILING FAN/ EXHAUST FAN OTHER APPLIANCES AND ALLIED WORKS AT LEKHAPANI UNDER GE LEKHAPANI

Amount

Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge.

Material and labour for providing point wiring with using 1.5 Sq.mm (nominal area), multi stranded copper conductor, single core PVC insulated FRLSH unsheathed cable (Maintaining Colour Code) 1100 volts grade with and including PVC casing and capping (size of casing caping as required at site but not less than 20mm) of suitable size including PVC accessories / fittings and fixtures fixed on surface , terminal boxes for mounting fittings/junction boxes with and including all accessories and using 1.5 sq.mm (nominal area), stranded copper conductor, single core PVC insulated FRLSH unsheathed cable green in colour as in earth continuity conductor connected to common earth dolly and connecting upto fittings complete all as specified and directed for:- Note: The quoted rates shall be inclusive for fixing casing caping to surface with using PVC raw plugs and provision of terminal/junction boxes of any shape and size. (a) One light /Ceiling Fan /Exhaust Fan/Bell/ point controlled by one, one way switch/bell push. . (b) One socket outlet 3 or 5 Pin, 6 Amp on independent board

All as per Ser Item No 2.00 here-in-before but for one socket outlet 3 or 5 pin, 6 Amps on same board complete all as specified and as directed.

All as per Ser item No 2 above but with using 2.5 Sqmm copper cable in and including PVC casing and capping complete all as specified and as directed for one socket outlet 5/6 pin 15 Amps complete all as specified and as directed.

Material and labour for Point wiring with using 1.5 Sqmm copper conductor unsheathed, multistranded, PVC insulated, single core cable FRLSH with earth continuity conductor of 1.5 sqmm PVC insulated copper conductor and including concealed type rigid PVC conduit of suitable size but not less than 20mm dia. and all accessories fixed to the surface of the roof/ walls etc., including terminal boxes for mounting fittings / junction boxes with and including all accessories and using 1.5 Sqmm (nominal area) , stranede copper conductor, single core PVC insulated FRLSH unsheathed cable gree in colour as in earth contunity conductor connected to common earth dolly and connceting upto fittings including making good all disturbed work to match the existing complete all as specified and as directed for:- (a) One light /Fan /Ex Fan/Bell point controlled by one, one way switch (b) One socket outlet 3 or 5 Pin, 6 Amp on independent board

All as per Ser Item No 5.00 here-in-before but for One socket outlet 3 or 5 Pin, 6 Amp on same board complete all as speciifed and as directed.

All as per Ser item No 5.00 above but with using 2.5 sqmm copper cable in and including concealed type rigid PVC conduit complete all as specified and as directed for socket outlet 3 or 6 pin 15 Amps complete all as specified and as directed.

S&F modular switch 6 Amp 1 module single pole , one way 230 V AC complete all as specified and directed by Engineer-in-charge.

S&F modular bell push, 6 Amps, 1 module single pole complete all as specified and directed.

S&F modular switch 16 Amp , single pole , one way 230 V AC complete all as specified and directed by Engineer-in-charge.

S&F modular socket outlet 6Amp multi socket for all pins 230 V AC complete all as specified and directed by Engineer-in-charge.

S&F modular socket outlet 16Amp and 6/16 Amp heavy duty 230 V AC complete all as specified and directed by Engineer-in-charge.

S&F modular type fan step regulator up to 120W - 2 module complete all as specified and directed.

S&F 2 module Metal Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge.

S&F 3 module Metal Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge.

S&F 4 module Metal Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge.

S&F 6 module Metal Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge.

S&F 8 module Metal Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge.

S&F in repairs switch paino flush type/bell push 6 Amps single pole one way 230 volts AC complete all as specified and directed.

S&F in repairs switch socket combination 2 in 1 3/5 pin 6 Amps 240 volts flush type multipurpose complete all as specified and as directed.

S&F in repairs switch socket combination 2 in 1 5/6 pin, 16 Amps flush type 240 Volts universal complete all as specified and as directed.

S&F in repairs electronic fan regulator 230 volts , step type, flush type, ISI Marked, complete all as specified and as directed.

M&L for ceiling rose, surface bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate, isolated body (ISI Marked) complete all as directed.

S&F call bell AC 230 Volts single pole complete with all accessories internally pre-wired and fixed to walls/ceiling on PVC Box with screw, all as specified and directed.

S&F PVC/polycarbonate angular lamp holder insulated body with back plate angle type suitable for batten fitting complete all as specified and directed by Engr-in-charge .

S&F LED tube light fitting 4 ft. 1 x 18/20 watt, 230 volts, ,integrated high efficency electronic driver complete with all accessories internally pre-wired and fixed to walls/ceiling with screw over and incld 2 nos of PVC round / square blocks, complete with all accessoriee including connecting up with twin core flexible copper conductor cable with suitable size, complete all as specified and directed taking down old unserviceable one .

S&F in repairs LED tube light fitting 4 ft. 1 x 18/20 watt, 230 volts, ,integrated high efficency electronic driver complete with all accessories internally pre-wired and fixed to walls/ceiling with screw over and incld 2 nos of PVC round / square blocks, complete with all accessoriee including connecting up with twin core flexible copper conductor cable with suitable size, complete all as specified and directed taking down old unserviceable one .

S&F LED tube light fitting 2 ft. 1 x 9 / 10 watt, 230 volts,integrated high efficency electronic driver complete with all accessories internally pre-wired and fixed to walls/ceiling with screw over and incld 2 nos of PVC round / square blocks, complete with all accessoriee including connecting up with twin core flexible copper conductor cable with suitable size, complete all as specified and directed taking down old unserviceable one .

S&F in reapairs LED tube light fitting 2 ft. 1 x 9 / 10 watt, 230 volts, integrated high efficency electronic driver complete with all accessories internally pre-wired and fixed to walls/ceiling with screw over and incld 2 nos of PVC round / square blocks, complete with all accessoriee including connecting up with twin core flexible copper conductor cable with suitable size, complete all as specified and directed taking down old unserviceable one .

S&F LED Bulk head fitting 10 watt in engineering plastic housing with clear prismatic diffuser complete with all accessories internally pre-wired and fixed to walls/ceiling on PVC Box with screw including connecting up with twin core flexible copper conductor cable with suitable size, including taking down old unsv fitting complete all as specified and directed.

S&F in repairs LED Lamp 9 watt Self ballasted type with PBT body shell and DC Diffuser complete all as specified and directed.

S&F in repairs LED Lamp 7 watt Self ballasted type with PBT body shell and DC Diffuser complete all as specified and directed.

S&F Aesthetically designed recessed mounted panel 1x1 Feet LED light 18/24 Watt flat round/square type for surface/ceiling mounting which provides soft-light and glare free symmetrical illumination including taking down old unsv light fitting all as specified and directed.

S&F Aesthetically designed recessed mounted panel 2x2 Feet LED light 30/36 Watt flat square type for surface/ceiling mounting which provides soft-light and glare free symmetrical illumination including taking down old unsv light fitting all as specified and directed.

S&F LED building security light fitting 25W new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP65 protection and impact resistance of IK07 incl mounting bracket with clamp of suitable size and connection complete incl taking down old unsv one, all as specified and directed.

M&L for providing sub main wiring with two single core 6.00 Sqmm (nominal area) PVC Insulated FRLSH unsheathed multi stranded copper conductor cable 1100 volts grade drawing through PVC casing-capping/ PVC Conduit complete as per direction/site rquirement including 6.00 Sqmm PVC insulated unsheathed multi stranded FRLSH single core copper conductor cable for earth wire including taking down/removing old one and making good distrubed surfaces of walls, floors, etc complete all as specified and directed. Note : (i) Three runs of single core 6.00 Sqmm multi stranded copper cable and one run of casing caping/conduit shall be measured as one run length (ii) Extra length of cable required for connection to DBs/MCBs shall deem to be included in unit rate quoted by contractor against the item (iii) Earth wire will run inside the casing capping/conduit.

All as per Ser item No 36.00 above but with using 4.00 Sqmm copper cable (nominal area) complete all as specified and directed.

M&L providing inverter supply connection with 1 x 1.5 sq mm only (nominal area) PVC Insulated FRLSH unsheathed multi stranded copper conductor cable 1100 volts grade as per sub main drawing through Existing PVC casing-capping/ PVC Conduit complete as per direction/site requirement, complete all as specified and directed. Note : (i) Only one run of single core 1.5 Sq mm multi stranded copper cable connected to inverter point (ii) Extra length of cable required for connection to DBs/MCBs shall deem to be included in unit rate quoted by contractor against the item

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one number single pole MCB 20 Amps , 240 Volts complete all as specified and as directed.

Taking down unserviceable main switches, DBs, bus bars chambers including all fittings and fixtures etc complete from existing main boards and removing from site all complete all as directed.

Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 8 way (2 + 6 way) single pole and neutral link complete all as directed by Engineer-in-Charge.

Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 4 way (2 + 2 way) single pole and neutral link complete all as directed by Engineer-in-Charge.

S&F MCB 25 to 32 Amp SP&N, 240 volts 10 KA 'C' series with all incoming/outgoing connections with proper size lugs including taking down old unserviceable one complete all as specified and directed.

S&F MCB 06 to 32 Amp SP, 240 voltss 10 KA 'C' series with all incoming/outgoing connection with proper size lugs including taking down old unserviceable complete all as specified and directed.

S&F in repair PVC rigid rectangular blocks, with back plate complete of sizes 10x10x4.5 cm complete all as specified and as directed.

All as per item No 45.00 here-in-before but size 17.5x10x4.5 cm complete all as directed.

S&F in repairs PVC insulated aluminium conductor 1100 volts grade heavy duty cable , served with inner sheathing of PVC tape and overall PVC sheathed flat for service connections twin core cable multistranded of size 10 sqmm complete all as specified and as directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 5 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways complete all as specified & directed by Engineer-in-Charge.

Taking down Ceiling fans/Exhaust fans/wall mounted fans of any type, sweep and make by disconnecting electric connection, dismantling blades, down rod and removing the fans to MES Store yard of AGE E/M Sub div for checking, complete all as specified and as directed by Eng-in-charge.

Hanging only ceiling fans of any size / make / sweep and connecting up with existing electric circuit / ceiling rose incl suitable cable, complete all as specified and directed.

Fixing only exhaust fan / wall mounted fan any size / make / sweep and connecting up with existing electric circuit/ ceiling rose including suitable cable, complete all as specified and directed.

M&L for Opening of Stator / Rotar of any type /model/ make Ceiling Fan 1200mm Sweep, cleaning of parts, greasing of moveable parts, taking out burnt coil, cleaning the segments complete and Re-winding the same with supper enameled copper wire of same gauge and same weight with Insulation paper, quick varnishing and heating as required, Re-assemble the same after repairs and carryout testing, complete all as specified and as directed by Eng-in-charge.

All as per Item No. 52.00 above but for Exhaust fan of 350 to 450mm sweep complete all as directed

All as per Item No. 52.00 above but for Exhaust fan of 200 to 300mm sweep complete all as directed.

All as per Item No. 52.00 above but for Wall mounted/Padestal fan of 250 to 300mm sweep complete all as directed. Note for item Nos 52.00 to 55.00 :- (i) The unit rate quoted shall deemed to be included for collection of fans from AGE E/M Sub Div Store yard Office/Work site will be under contractor's own arrangement for rewinding/repair the same, removing defective parts, burnt winding carefully, cleaning & re-assembling the fan after repair incl. oiling, greasing, replacing un serviceable cottor pins, washer lock bolts, connector etc. depositing the fans to AGE E/M store yard and testing complete to the satisfaction of Engineer-in-charge. (ii) Fixing or hanging of fans including spare parts shall be measured and paid separately.

M&L for Over hauling of ceiling / exhaust fan of any sweep/make i.e. opening of fan and cleaning ball bearing, filling grease/oil and changing of u/s cotter pin, nut, screw, check nuts and bolts as required incl. cleaning of body, blades, down rods, canopies etc and re-assembling complete all as directed.

M&L for Painting of ceiling fan / exhaust fan complete, in situ with synthetic enamel paint by spraying method including filling cavities with filler, one coat after cleaning all dust etc,complete all as specified and directed.

S&F Ball Bearing as approved suitable for Ceiling/Exhaust/wall mounted Fan of any sweep and make as existng same, as fixed in repairs complete all as specified and as directed.

S&F Metal bush bearing as approved suitable for Ceiling/Exhaust/wall mounted Fan of any sweep and make as existng same, as fixed in repairs complete all as specified and as directed.

S&F Capacitor 2.5 mfd 415 Volts AC 50Hz, suitable for Ceiling/Exhaust/wall mounted Fan of any sweep and make as existng same, as fixed in repairs complete all as specified and as directed.

S&F Capacitor 3.15/ 4.0 mfd 415 Volts AC 50Hz, suitable for Ceiling/Exhaust/wall mounted Fan of any sweep and make as existng same, as fixed in repairs complete all as specified and as directed.

S&F Rotor assembly with shaft without winding suitable for Ceiling/exhaust fan of any make/sweep as fixed in repairs complete all as specified and as directed.

S&F MS Down Rod 'medium grade' 15 mm dia of length up to 0.35 mtr including 'U' shape shackle clamps assembly with Rubber Reel of suitable size/as ordered including necessary Mild Steel Nut, Bolts, Washer etc. (as per sample) as fixed in repairs complete all as specified and as directed.

S&F Fan hook suitable for 40mm dia pipe/angle, made out of MS flat iron of size 50 x 6mm incl suitable size of nut, bolt & washer as fixed in repairs complete all as specified and as directed.

S&F Canopy (Set of 2) as approved suitable for Ceiling Fan of any Sweep and Make (as per sample) as fixed in repairs complete all as specified and as directed.

S&F Fan Blades (Set of 3) suitable for Ceiling Fan 1200/1400mm Sweep of make/type as required at site, as fixed in repairs complete all as specified and as directed..

S&F Fan Blades (metal/PVC) suitable for Exhaust Fan/wall/cabin fan 225/300/350mm Sweep, make/type as required at site, as fixed in repairs complete all as specified and as directed.

M&L for repairing PCB control unit (AC DC IR PCBA) of BLDC Ceiling Fan with/without hand remote type including replacement of unserviceable/burnt electronic spare parts, repair hand remote, electronic chip, magnetic coil ring and refixing same, connection of electrical control circuit, testing for satisfactory functioning including taking down old unserviceable PCB unit complete all as specified and as directed.

S&F in replacement Exhaust fan of 200 mm sweep 230 volt AC supply, made of strudy engineering plastic, white colour, square shape same as per site with louvers, including taking down old unserviceable exhaust fan complete all as specified and as directed.

S&F in replacement air circulation, wall mount fan of 400 mm sweep 230 volt AC supply, white colour,pull chain control, mounting type, including taking down old unserviceable, complete all as specified and as directed.

S&F in repair modular type electronic Fan regulator 230 volts AC, step type, socket type, 2 module as per sample ISI Marked,as fixed in repairs complete all as specified and directed.

M&L for Flexible multistranded copper conductor of 3 core of size 0.75 mm, round type cable as fixed in repairs complete all as specified and directed.

S&F in replacement remote set for BLDC (remote controled) Ceiling Fan , with features of controle switch including battery all as per exsting specification and model complete all as specified and directed Make : Havells/Bajaj/Crompton (As per site requirement)

M/s Singh enterprises

MAA COMMUNICATION

RIA CONSTRUCTION

ms singh construction