PROVN OF 200 KVA TRANSFORMER FOR TCP-5 AREA, EXTERNAL ELECTRIC NETWORK NEAR 66 KV SUB STATION AND CONVERSATION OF HT OH ELECTRIC LINE TO UG CABLING AT MAP-I AREA AT FARIDKOT MIL STN

Supply, installation, commissioning & testing of transformer step down, outdoor type 11 KV/433 Volt as per IS-1180 Part-I 2014 including amendment upto date, energy efficient level -II minimum, Oil Natural Air Natural (ONAN) cooled, copper wound, suitable for AC, three phase, 4 wire, 50 Hz system of capacity 200 KVA, oil immersed having vector group DYN-11, naturally cooled type, complete with and including first filling of transformer oil, delta connection on HT side, star connection on LT side, manually operated, off-load tap changer on HT side to vary secondary voltage to (+)(-) 7.5% in three steps of 2.5% each, cable end box at LT side, LT side cable box shall also be fitted with suitable size of cable glands for making connections with all accessories and under mentioned fittings complete all as specified & directed:- (i) Rating plate and terminal marking plate. (ii) Two earthing terminals for body earthing and two additional for neutral brought out on a bushing (iii) Lifting lugs (iv) Drain valve with plug or cover plate (v) Oil level indicator with minimum and maximum marking (vi) Cooling Radiator (vii) Thermometer pocket (viii) Conservator (ix) Oil filling hole with cover (x) Thermometer 100mm dial/stem type with metal guard having maximum temperature indication with resetting. (xi) Silica gel breather duly filled with silica gel (xii) 03 Nos. Porcelain HV bushing with arcing horn on HV side with bushing rod (xiii) One cable end box on LV side with 4 Nos. porcelain bushing with rod (xiv) Any other fittings as recommended by the manufacturer for effecient functioning of the transformer. (xv) Foundation as per manufaturer specification. Notes : (i) The drawing of transformer shall be approved by accepting officer on the receipt of request from the contractor through GE. (ii) The transformer shall be tested as per IS for all routine tests in the factory premises and reports will be deposited with purchase voucher. (iii) Contractor will arrange necessary equipments and material to facilitate testing of transformer by SEI/EI/AEI.

Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor cable of size 120 Sqmm, 3.5 grade, 1100 volts grade conforming to IS-7098 (Part-I -1988) in trenches ducts, pipe on walls, poles of following sizes completed all as specified and directed.

All as per item No 02 above but size 95 Sqmm 3.5 Core

All as per item No 02 above but size 70 Sqmm 3.5 core

All as per item No 02 above but size 25 Sqmm 4 core

Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 11000 volts grade conforming to IS-7098 (Part-I -1988) in trenches ducts, pipe on walls, poles of 95 sqmm 3 core complete all as specified and directed.

M & L for Heavy gang operated triple pole with fuse unit mechanically operated air break on load disconnecting switch each pole consist of galvanised iron base HT 11KV with polymer insulators per phase non ferrous knife and spring loaded contact GI pipe of adequate length for operation from ground level and operating handle complete in both OFF and ON position capacity 11 KV 200 Amps all as specified and directed by Engineer-in-Charge.

S&F Pre-stressed cement concrete pole, 11 metre long of cross section 152mm x 152mm at top and 152 mm x 260 mm at bottom, class 9, complying with requirements of IS-1678-1998 errecting truly in vertical position complete all as specified and directed.

Supplying, jointing and testing of heat shrinkable type end termination cable jointing kit, outdoor type, suitable for 11KV under ground earthed system 3 core XLPE cable of size 95 Sqmm including making connections complete all as specified and directed.

Supply, install testing and commissioning weather and vermin proof LT feedar pillar box (Panel board) factory fabricated outdoor type totally enclosed made out of 3 mm thick CRCA sheet metal enclosure of suitable size, with angle iron frame of MS angle 40 X 40 X 6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 Hz system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting suitable and sufficient nos circular cable entry holes at bottom only with suitable PVC/rubber bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated (15 micron) grey hammer tone with one coat of including connecting with LT armoured incoming and outgoing cables and including required sizes of cable lugs and angle iron stand with PCC work complete all as specified and directed and consisiting of following :- (a) Aluminium bus bar of 400 Amp current rating capacity, length as actually required at site for 3 phase and neutral, mounted on epoxy/FRP bus bar insulator. (b) MCCB 250 Amps 4 Pole 36 KA, 415 V - 01 No. for incoming. (c) MCCB 125 Amps 25 KA, 415 V - 01 No for outgoing. (d) MCCB 63 Amps 16 KA, 415 V - 03 Nos for outgoing. (e ) SPN 40 Amp 10 KA 230V - 02 Nos for outgoing. (f) Digital mutifunction meter for indicating of current, voltage with necessary CTs etc - 01 No (g) LED type indicator lamp Red/Yellow/Blue colour-01 set