Provision of Internal and External Electrification to the Constructed 33 Law Chambers in the FF within the Combined Court Building premises at Salem under SP and 33 Law Chambers in the SF within the Combined Court Building premises at Salem under TP

Amount

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End ) (SD-281)

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End (SD-283)

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End (SD-298)

Supply and fixing of 3nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD-389)

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD-401)

Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb. (SD-84)

Supply and fixing of single box type 4'20W LED fitting complete with TW round blocks on wall or ceiling with 20 W LED TubeLight (Double Side) with PVC unsheathed FRLS Copper leads from terminals to the fitting. (DATA-1)

Supply and fixing of 60W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . (SD-450)

Supply and fixing of 1200mm (48") Sweep BLDC ceiling fan complete (HIGHER END) with 2 Module 100 W Fan Step Regulator (HIGHER END) with stepped with 300mm down rod on the existing fan clamp (DATA-2)

Supply and fixing of 300mm (12") sweep (lightduty) AC exhaust fan complete with necessary wall opening and making good of the wall. (SD-114)

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan. (SD-120)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (SD-514)

Supply and fixing of 32A DP MCB in sheet steel enclosure (Legrand make) inflush with wall and making good of the concealed portion with earth connection only. (for street light control) (DATA-3)

Supply and run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion. (SD-337) [For 3x6A Computer Plug]

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour. (SD-57) (15A power sockets)

Supply and erection of dust and vermin proof cubical EB metering panel board of suitable size made up of 16 SWG sheet steel for outer body, doors, switch separation, supports with supply and fixing of Double pole ELCB, rewirable fuse units, suitable for housing 17 Nos. 5-20A single phase 230V 50 HZ Watt hour metre with bus bar chamber complete with 25mm x 6mm tinned copper flat for three phase and neutral and 25mm x 3mm tinned copper flat for panel earth bus with bus bar insulators complete with interconnection of watt hour meters, using suitable current carrying capacity multistrand PVC insulated copper wires between bus bar to WHM and WHM to cutout and ELCB's. Tinned copper flat for earth bus runs all round the panel to provide earth connection and inter connection by No.8 SWG HDBC conductor to incoming earth link and meter chamber earth bus. The housing to accommodate 5A-20A single phase energy meter 1-8 bottom row and 9 to 17 top row sectional cutout for 17Nos. with 20A, 30mA DP ELCB -17 NOS.suitable for WHM and the chambers with 5mm thick transparent glass at the front for reading purpose and supply and fixing of Indication lamps with toggle switches with sealing provision by TNEB complete with internal connections and as per TANGEDCO MRT specifications.The panel board should be painted with two coats of High quality epoxy paint over one coat of red oxide primer with superscriptions. The above cubical EB metering panel rest on suitable angle iron base on Masonary pedestal (DATA-4)

Supply and laying of 3½x185 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (Main incoming) [for 4Nos. EB metering panel] (SD-189)

Supply and clamping of 3½x185 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. [for 4Nos. EB metering panel] (SD-207)

Supply and Laying of 3 1/2 x 185 sq.mm. PVC armoured LTUG cable in suitable size GI pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (DATA-5)

Supply and fixing of brass cable gland for 3½x185 sqmm PVC armoured LTUG cable with earth connection. [for 4Nos. EB metering panel] (SD-171)

Supply and providing cable end termination of 3½x185 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. [for 4Nos. EB metering panel] (SD-220)

Supply and fixing of Digital weekly programmable timer switch with shortest switching time 1minute on suitable Angle iron 38mm x 38mm x 6mm with L&T Mcx-03 32A 4Pole Power Contactor, Cs97011 connection. [ DATA -6 ]

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 60W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour . [ SD - 457]

Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.[ SD. No : 657 ]

Supply and clamping of 4 x 10 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. [ SD. No : 198 ]

Supply and fixing of brass cable gland for 4 x 10sq.mm. PVC armoured LTUG cable with earth connection (DATA-7)

Supply and providing cable end termination of 4 x 10 sq.mm PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.[ DATA - 8 ]

Coil earth to street light poles with No.8 SWG GI wire of 11.5metres of length in which 10metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth.[ SD No - 78]

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection. (SD-371)

Supply and fixing of 3 phase 315A aerial fuse unit for 3Nos 315A fuse unit (500V) on suitable MS sheet covered with 6mm thick hylum sheet on suitable AI work the tapping pole with necessary clamps. (DATA- 9)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD-211)

Karhirvel Electrical works (BID ID -1326161)

RAJ SOLAR POWER AND ELECTRICAL SYSTEMS (BID ID -1326353)