Supply Installation Testing and Commissioning of facade Illumination to Shree Mahalaxmi Devasthan Panaji Goa

SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based wash light, Protection Rating:IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "LowVoltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020", and "Electromagnetic CompatibilityDirective - EN 61547:2020", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lightshaving the rotation degrees embossed in the die cast. Power consumption: 50W, CCT: RGBW (6000K -7000K) (asper the design approval), Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°(as per thedesign approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted/ extruded aluminium withembossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can beeasily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designedto minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamiccolour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote DeviceManagement (RDM) for enhanced configuration and management. The luminaire should offer channel options of8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitionslike 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per therequirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operationif there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surgeprotection in the driver 2KV-4KV (Additional if required will be added as per therequirement), Toughened transparent glass having the IK protection: IK08 or higher, Painting: Chemical 3/7 tankprocessed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable tooperate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainlesssteel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmentalcondition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade LM80 to be provided.Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper/OSP finish. LM79, IK08, HV & IP66 Certificates from NABL Accredited laboratory. LED Makes should be CREE,LumilLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory. Power &DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS of make leksa or equivalent who has in house NABL Lab as directed by the engineer incharge.

SITC of high quality long through Multi colour with RGBW 4in1 LED, DMX-RDM based linear wash light, ProtectionRating: IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification againststandard "Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020", and "ElectromagneticCompatibility Directive - EN 61547:2020", Mounting Structure: Adjustable surface mount yoke arrangements in thedie cast for fixing. Power consumption: 50W, CCT: RGBW (6000K - 7000K) (as per the design approval), Optics:PMMA/PC Lens with holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must beMin : 55Lm/W, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartmentfor keeping the decoder/driver in the housing which can be easily removable for service without disturbing theLEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours andit shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration andmanagement. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with thesechannels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump/ strobe,Micro function and speed. Additionally, it shall feature auto colour synchronization functionality, allowingseamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External GroupDriver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added asper the requirement), Toughened transparent glass having the IK protection: IK07 or higher, Painting: Chemical3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitableto operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainlesssteel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmentalcondition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade. Luminaire is inclusiveof Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCBthickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79,IK07, HV & IP66 Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram,Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Outalong with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS.of make leksa or equivalent who has in house NABL Lab as directed by the engineer incharge.

SITC of high quality long through Multi colour with RGBW 4in1 LED, DMX-RDM based linear wash light, ProtectionRating: IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification againststandard "Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020", and "ElectromagneticCompatibility Directive - EN 61547:2020", Mounting Structure: Adjustable surface mount yoke arrangements in thedie cast for fixing. Power consumption: 30W, CCT: RGBW (6000K - 7000K) (as per the design approval), Optics:PMMA/PC Lens with holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must beMin : 55Lm/W, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartmentfor keeping the decoder/driver in the housing which can be easily removable for service without disturbing theLEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours andit shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration andmanagement. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with thesechannels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump/ strobe,Micro function and speed. Additionally, it shall feature auto colour synchronization functionality, allowinseamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External GroupDriver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added asper the requirement), Toughened transparent glass having the IK protection: IK07 or higher, Painting: Chemical3/7 tank processed treatment before the powder coat black/Grey/approved colour coat of make leksa or equivalent who has in house NABL Lab as directed by the engineer incharge.

SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based spot light, Protection Rating:IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020", and "Electro magnetic Compatibility Directive - EN 61547:2020", Mounting Structure: Adjustable surface mount yoke arrangements in the die cast for fixing. Power consumption: 20W, CCT: RGBW (6000K - 7000K) (as per the design approval), Optics: PMMA/PC Lens with holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hotspot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications.Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it via DMX, Ethernet, and Remote Device Management (RDM for enhanced configuration and management. The luminaire should offer channel options of 8/4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump/strobe, Micro function and speed. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK07 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of - 10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in prewired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper/OSP finish. LM79, IK07, HV & IP66, Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS of make leksa or equivalent who has in house NABL Lab as directed by the engineer incharge.

SITC of high quality long through multi colour with RGBW 4in1 LED, DMX RDM based wash light, Protection Rating: IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020", and "Electromagnetic Compatibility Directive - EN 61547:2020", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the light having the rotation degrees embossed in the die cast. Power consumption: 100W, CCT: RGBW (6000K 7000K) (as per the design approval), Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60° (as per the design approval), Luminous Efficacy must be Min: 55Lm/W, Body: Die casted/extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour changing light with 16.7 million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV 4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK08 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade LM80 to be provided. Luminaire is inclusive of Integral male/female waterproof connectors with structures in prewired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper/OSP finish. LM79, IK08, HV & IP66 Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with LM80 report from an international testing Laboratory. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS.of make leksa or equivalent who has in house NABL Lab as directed by the engineer incharge.

SITC of high quality Multi Color Neon Flexible light,Protection Rating:IP65, Mounting Structure: Adjustable wall mount aluminium profile for fixing the lights. Power consumption:12W,CCT:RGB/RGBW,(asperthedesignapproval)BeamAngle:120º,Control:DmX512Channel:4CH,PowerInput:DC24Vwith external driver, Surge Protection:Inbuilt surge protection 2KV 4KV(Additional if required will be added as per the requirement),Fixture will be suitable to operate in a temperature range of 0°C to 50°C, LED life time should be at least 50,000 burning hours at L70 at 25 degree centigrade. Luminaire is inclusive of Integral male/female water proof connectors with structures inpre wired conditions as per IS standard. LED Makes should be CREE,LumilLED, Osram, Seoul, Epistar, Nichia or equivalent with the engineer or 3rd party testing laboratory approval.of make leksa or equivalent who has in house NABL Lab as directed by the engineer incharge.

SITC of Aluminium Profile for Neon flex of make leksa or equivalent who has in house NABL Lab as directed by the engineer incharge.

SITC of high quality long through multi colour with RGBW 4in1 LED, DMX RDM based wash light, Protection Rating: IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment EN 60598 (Part 2/Sec 1):2020", and "Electromagnetic Compatibility Directive EN 61547:2020", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the light having the rotation degrees embossed in the die cast. Power consumption: 150W, CCT: RGBW (6000K 7000K) (as per the design approval), Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60° (as per the design approval), Luminous Efficacy must be Min: 55Lm/W, Body: Die casted/extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7 million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV 4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK08 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper/OSP finish. LM79, IK08, HV & IP66 Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with LM80 report from an international testing Laboratory. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS.of make leksa or equivalent who has in house NABL Lab as directed by the engineer incharge.

SITC of DC power driver for the above Lights, Power: 200W, Input: AC 110-240VAC, 50Hz, Output: DC 12/24V, Protection rating: IP67, Surge protection: LL 4KV, LE 6KV.of make leksa or equivalent who has in house NABL Lab as directed by the engineer incharge.

SITC of high quality DMX decoder, Power Input: DC 24V, Input Signal: DMX512, Addressing: You can manually set DMX addresses using DIP switches or digital displays, Smooth Dimming: Enables 0–100% dimming and dynamic effects like fading or color chasing. IP Rating: IP20.of make leksa or equivalent who has in house NABL Lab as directed by the engineer incharge.