PERIODICAL SERVICES TO SAILORS MARRIED ACCOMODATION AND OTM ACCN IN POCKET B AT INS MANDOVI UNDER GE (P) NAVY MANDOVI

M&L for Dubbing out average 15mm thick in CM 1:6 on irregular face of walls (when specifically rendered in writing)

M & Labour for 20 mm thick cement plaster in CM 1:4 in two coats (15 mm base coat and 5 mm finishing coat) using factory manufactured polymer modified premixed/ready mixed plaster of UltraTech Cement or equivalent approved make, prepared with well graded treated dry natural sand conforming to IS 383, suitable for external plastering and having low rebound and low water demand curing properties. The plaster shall be mechanically mixed with water in metallic tray/container to obtain proper consistency as per manufacturer’s specifications and applied over exterior masonry and concrete surfaces, including cleaning and preparation of surfaces, providing richer mix at corners/edges wherever required, making grooves of existing size and pattern, providing scaffolding/staging at all heights, fixing chicken wire mesh of size 100 mm × 100 mm at RCC and brick masonry junctions, curing, finishing and all allied works complete, all as specified and directed by the Engineer-in-Charge. Note: The quoted rate shall be deemed to include waterproofing powder/liquid @ 3% by weight of cement in plaster work at all floors and levels.

M & Labour for 10 mm thick rendering/plastering using factory manufactured polymer modified premixed/ready mixed plaster of UltraTech Cement or equivalent approved make, having minimum composition of C:S :: 1:6 with fully treated, dry and well graded natural sand conforming to IS 383, suitable for plastering work and having low rebound and low water demand curing properties.The plaster shall be mechanically mixed with water in metallic tray/container as per manufacturer’s specifications and applied over masonry and concrete surfaces, including preparation and cleaning of surfaces, providing chicken wire mesh of size 100 mm × 100 mm at RCC and brick masonry junctions, curing, finishing and all allied works complete, all as specified and directed by the Engineer-in-Charge.

M&L for rendering 5 mm thick on ceiling using factory manufactured pre mix/ready mix plaster M/s Ultratech Cement Ltd' or other approved equivalent make, having minimum composition of C:S : 1:3 using fully treated dry, well graded natural sand confirming to IS 383 suitable for plastering in ceiling, having low rebound properties, low water demand for curing properties mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over concrete surfaces, including providing chicken wiremesh 100mm x 100mm size at RCC & brick in joints, including cleaning the surfaces, curing etc. complete all as specified & directed by Engineer-in-Charge .

M&L for cutting down plants/trees of upto 10cm girth and applying ROUNDUP/ GLYPOCET or equivalent (Herbal medicine) to roots of roof tops/sides, external walls of bldg chajjas, wall junctions, at junctions of rain water/CI waste water pipe junction including taking out possible quantities of roots entered in wall/slab surfaces and making good the surfaces including repairing the GI/CI/ACC/PVC pipe joints of that affected locations after applying herbal medicing making good to suit the adjoining surfaces shall be carried out using PCC (1:2:4) type 'B1' or cement mortar 1:2 with necessary scaffolding/staging etc at any height of from the ground level all as directed and as specified.

M&L Washing rubbing down and stopping of distempered surfaces any type of wall incl preperation and making smooth surface by applying ready mix putty where required then apply two coats of distemper oil emulsion (Tractor Suprema or equivalent) Paint of any tint specified by Engineer -in-Charge. The Paint Strains on Wall / Floor / Joinery / Glass / Wire Mesh / Furnituers shall be cleaned to the satisfaction of Engineer-in-Charge MAKE - Asian, Berger, JSW Paint or equivalent

M&L Washing rubbing down and stopping of distempered surfaces any type of wall incl preperation and making smooth surface by applying ready mix putty where required then apply one coats of distemper oil emulsion (Tractor Suprema or equivalent) of any tint specified by Engineer -in-Charge. The Paint Strains on Wall / Floor / Joinery / Glass / Wire Mesh / Furnituers shall be cleaned to the satisfaction of Engineer-in-Charge MAKE - Asian, Berger, JSW Paint or equivalent