Extension of Civil transmission division office at 132 KV SS Manduadih Varanasi

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below (DSR - 15.12.1)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar (DSR -15.7.4)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.(DSR - 15.3)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.(DSR - 15.56)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR - 15.60)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.(DSR No. 5.22.6)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand)(DSR-6.4.2)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure in Cement mortar 1:4 (1 cement :4 coarse sand) above plinth level up to floor V level.(DSR 6.13.2)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) ( DSR - 5.2.2)

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts (DSR - 5.9.6)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).( DSR - 5.3 )

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform ( DSR - 5.9.3 )

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.Door chowkhats(DSR No.14.2.1)

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge(DSR No.14.85)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group - C (DSR - 27.01)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet (DSR E&M 2022 1.24.4)(DSR-27.02)

Wiring for circuit/ submain wiring along with 2X4 Sq.mm + 1X4 Sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (DSR - 27.06)

SUPPLYING AND FIXING 5 AMPS TO 32 AMPS RATING, 240/415 VOLTS, "C" CURVE, MINIATURE CIRCUIT BREAKER SUITABLE FOR INDUCTIVE LOAD OF FOLLOWING POLES IN THE EXISTING MCB DB COMPLETE WI TH CONNECTIONS, TESTING AND COMMISSIONING ETC. AS REQUIRED. SINGLE POLE. (DSR - 27.10)

SUPPLYING AND FIXING 63 AMPS, DOUBLE POLE, 240 VOLTS, ISOLATOR IN THE EXISTING MC B DB COMPLETE WITH CONNECTIONS, TESTING AND COMMISSIONING ETC. AS REQUIRED.(DSR - 27.11)

Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (DSR E&M 2022 2.4.1)(DSR-27.13)

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. for 6 Module . (125mmX75mm) (DSR - 27.19)

Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect.(NSI No. 28.41)

12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) (DSR - 13.4.2)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (DSR - 10.2)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR - 13.80)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture( DSR.13.62.1)

Please Enable Macros to View BoQ information

Special Condition :-

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

General"."

SIGNATURE OF TENDERER / AUTHORISED

PERSON ALONGWITH SEAL OF THE FIRM

Full Postal Address:……………………….

Phone No……………….. Mob. No…………