of HT/LT line and 03 Nos. 250 KVA substation Near Anna Market, Near ram Leela AND Near Aajmi marbel , EUDD Sitapur road,Transgomti LESA, Lucknow.

Amount

Safe Loading, Carriage & unloading of following material from Central stores Daliganj To J.E's Store and form J.E's stores to work at site.

(a) S.T. Pole 11 M long.

(b) PCC pole 8.5 Mtr. long

(c) 250 KVA T/F

(d) 400 KVA T/F

(e) ABC 3x120+1x95+1x16 sq.mm.

(f) ACSR weasel conductor.

(g) LT Cable 1x630sqmm/3.5x400sqmm

Fabrication, errection of substation type double pole on ST pole with fixing of necessary clamps, accessories required including supply and fixing of straight MS channel 100x50 mm Top channel (2240 mm long) One no. dropper channel 100x50 mm (2240 mm long) 1 No,1 no. Angle 65x65x6mm for DO fuse set and providing PVC single core cable of size 50mm with Al. lugs with arrangement of fixing 3 nos. pin insulator and pin, grouting in 1:4:8 cement, sand, brick ballast and making of plinth 300 mm above ground level along with painting as per RESPO specification & direction of E/I . All materials, except ST pole pin insulator shall be supplied by the contractor.

Errection of 8.5 Mtr long PCC pole by digging pit binding of Aerial Bunched Conductor fixing of necessary clamps alongwith grouting & Plinthing of pole. All material shall be supplied by the contractor and PCC pole provided by the department.

Construction of T/F plinth of size 2x2x1.2 mtr. With help of Ist class bricks and massonary in the ratio 1:4 cement & sand coarse, filling the structure completely as per norms with RCC top 1:2:2 cement sand coarse stone grit with ms bar and MS channel for resting T/F all material shall be supplied by Contractor.

Construction of masonry type Distribution Pillar box with first class brick ballast cement, coarse sand, local sand, brick ballast and MS Round bar of 10 mm dia including supply and mounting of 02 nos. Straight MS Angle 50x50x6x750 mm-2 nos., Henely type tailless fuse units 500 Amps. 650 Volts one no. for incoming and other for outgoing, Copper bus bar 4 nos. 1000x50x6 mm with locking arrangement made of 18 SWG BP Sheet (All the material will be arranged by the contractor)

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I.

Pipe type earthing with 20 mtr deep borring and providing Jindal make GI pipe 1" dia (20 mtr GI pipe) and GI strip 25x5 mmx6 meter long attached with clamps, L piece , nut & bolts and GI pipe cap. All material shall be supplied by the contractor.

Laying of LT Cable 1x240/400 with suitable size of AL. lugs. All material shall be provided by department.

Grouting & Nuzzling of stay set complete including supply and fixing of necessary clamps, complete Stay set and other accessories. Only Stay wire shall be supplied by the Department.

Laying and sagging of 3 phase 3 wire 11 KV line on ACSR weasel conductor as per RESPO specification and direction of E/I.

Erection & commissioning of (3x50/95/120+1x70+1x16 sq.mm) Aerial Bunched Conductor. Only ABC shall be supplied by the department.

Supply and fixing of clamps.

(a) Dead end clamps

(b) Eye hook

(c) Suspension clamps

(d) LT Clamp for PCC/STP pole with N&B

(e) L.T. connectors type 'A' & 'B' type (Piercing connector)

Fabrication and fixing of 11 KV TPMO set.

Fabrication and fixing of 11 KV D.O. fuse set of 3 nos.

Providing and Fixing of Three Phase distribution boxes/Kiosk on the LT poles including all clamps and material required for mounting connections & sealing.

Connection of LT service Line of consumers after construction of LT Line through distribution boxes and commissioning of ABC line.

Installation, commissioning of 250 KVA T/F including its connection in between 11 KV line and LT line mounting of copper L-Pieces 300x65x6 mm, providing Aluminium crimping lugs of suitable size. (All the material excluding transformer will be arranged by the contractor)

Installation, commissioning of 400 KVA T/F including its connection in between 11 KV line and LT line mounting of copper L-Pieces 300x65x6 mm, providing Aluminium crimping lugs of suitable size. (All the material excluding transformer will be arranged by the contractor)

M/S BALA JI ENTERPRISES

S.R. ENTERPRISES

POWER CONTROL AND SWITCHGEARS