REPAIR REPLACEMENT OF DOORS WINDOWS FLOORING PLUMBING AND SANITARY WORKS IN JCO ORs MD ACCN AND CHAIN LINK FENCE BARBED WIRE CONCERTINA COIL AND POSTS IN PH II AREA UNDER GE NARANGI

Amount

Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in soft / loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering, and removing surplus soil to a distance not exceeding 50 M and making good surface complete all as specified and as directed.

Dismantling posts or struts embedded in ground (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as specified and as directed.

Dismantling posts or struts embedded in ground (wood, steel or R.C.C.) any section, including taking out embedded portion in natural ground and making good disturbed ground complete all as specified and as directed.

M & L for PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for PCC 1:3:6type C-1 (using 20mm graded stone aggregate) as in back filling of pressed steel door/window frame complete all as specified and directed.

M & L PCC 1:5:10 Type E-2 ( Using 40mm graded stone aggregate) as in foundation , filling as in sunken floor complete all as specified and directed.

Demolition of plain cement concrete (Un-reinforced) in ground floors and paving n exc 15cm thickness (below or above ground level) including removal of spoils/ demolished materials not exceeding 50m and depositing complete all as specified and directed.

M & L for100mm thick PCC 1:2:4, type B2 (using 40mm graded stone aggregate) as in path/paving /hardstanding finishing the surface fair and even without using extra cement complete all as specified and as directed.

M&L for 50mm dia and 350mm long medium grade GI pipe spouts with wire gauge on inside mouth to be fixed before water proofing treatment of sunken slabs by cleaning RCC slab surface floors and walls by wire brush and rendering 6mm thick in CM 1:4 mixed with integral water proofing compound on uneven surface to make the surface even, filling it with water for checking dampness and seepage, all junction and walls where CI/GI pipe are passing be sealed with epoxy mortar. Applying two coats of polymer modified cementious water proofing coating of minimum thickness 1mm each layer as per manufacturer's instruction on floor and walls ( upto 100mm above FFL and spraying coarse sand on surface till the seccond layer is green, applying 20mm thick plaster in CM1:4 mixed with WPC of approved make on floors and walls including rounding of corners and junctions towards spouts. All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all around after painting with anti corrosive black japan paint on CI/GI pipes.. Testing the water proof area by filling water for at least 72 hours and testing for leakage/seepage for the entire satisfaction of Engineer in charge. Applying two coats of hot blown bitumen @1.50kg/ Sqm for each coat and laying 50 micron black polythene film in floors complete.

M & L for plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate)as in lintels upto 1.5 m span, cills, steps, seismic and other similar bands, plinth courses, parapets and railing upto 60cm in height coping , kneelers etc including weathering, slightly rounded or chamfered angles and throating including all necessary formwork complete all as specified & as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm but not exceeding 10 cm long and diameter of shank 5 to 10mm completed all as specified and as directed.

M & L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cranking, bending spirally for hooping for columns,hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia as in reinforcement bar complete all as specified and as directed.

M&L for mild steel TMT bars 6 mm dia and over upto and including 10mm dia cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and as directed.

Dismantling fencing wire mesh of any size and type complete all as specified and as directed.

Supply only chain link fencing wire mesh of size 75X75mm, made with 3.15 mm dia including 5mm dia line wire conforming to IS 2721 mild steel galvanised wire complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolt etc including provision of binding wire complete all as specified and as directed

S & F in repair galvanized two strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to RCC / steel post etc. including securing or tying at crossing with and providing of galvanized mild steel wire, staples or steel pins, etc. (each line of wire to be measured separately) complete all as specified and as directed.

Restraining and resuring including making good staple of galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing complete all as specified & as directed.

S&F in repair mild steel angle iron post & strut etc. in fencing including embedding in concrete and screwing etc. including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work confoRming to Fe-290 GdeE-165 completed all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for mild steel Bands,supports,or stays for rainwater, ventilating pipes, including bolts if required, hooks( stay) , heavy, for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, holdfasts, wall ties, hooks for hanging fans, plain angle claets for securing purlins to wood trusses or rafters, knee piece inserts, two way or three way starps, plate washers and similar small articles quality confirming to Fe290-Gde E-165 complete all as specified & as directed.

S&F rolled mild steel framed works as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hangings also fastening and fixing etcconforming to Fe.290.Gde-E-165.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

Demolition of brick or stone masonry work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

All as per item No. 25 above but except bricks complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each including builders hardware complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.

Taking down shutter of any description area exc 1 sqm but n exc 2 Sqm each and refixing in the same opening complete all as specified and as directed.

M&L for 1.25mm thick factory made pressed steel frames of size 125x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L for 1.25mm thick factory made pressed steel frames of size 105x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 30mm thick 2nd class hardwood rail and style plain framed panelled shutter ( any No. of panels) with lock rail and panel of 9mm BWP commercial ply of 12mm veneered particle board with commercial veneering on both faces. The size of rail and style shall be as per IS 1003 ( Part-1) kiln seasoned and chemically complete all as specified and directed.

S&F 30 mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type with decorative choice lamination on both side complete all as specified and directed.

S & F factory made solid PVC prelam door frame of size 100mm x 45mm made out of 5 mm thick prelam PVC sheet reinforced with MS square tube 15mmX15mm. The two vertical door profiles shall be reinforced with 40mmX20mm MS tube 19 gauge. The door frame shall be fixed to wall using 100mm long MS screws complete all as specified and as directed.

S & F factory made solid panel prelam PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes 19 gauge thickness and size of 40mmX20mm for stiles, top, bottom and lock rails . MS frame shall be covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 30mm width stuck inside with solvent cement f 110mm width forming stiles in which 100mm shall be flat and 5mm shall be tapered, and 5mm thick 135mm wideprelam PVC sheet for top and bottom rail in which 125mm shall be flat and 5mm shall be tapered on either side of panel and for lock rail 145mm sheet, 125mm shall be flat and 5mm tapered on either side, additional 5mm thick PVC strip stuck inside of C channel and prelam PVC sheets for top rails, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of Prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cementcomplete all as specified and as directed.

S&F factory made pressed steel window febricated out of cold reduced low carbon steel sheet of designation CR 2 , grade D as per IS 513 : 2008 including following componenets/ specification complete.(i) Two leaf glazed shutter and two leaf gauged shutter ( mosquito proof) with provision of 450max fixed light window. (ii) Opening of window exceeding 0.90 sqm but not exceeding 2.00 sqm (iii) pressed steel window frame double rebate (iv) guard bar of 10mm MS square bars @ 150mm C/C vertical spacing thriugh out outer frame to outer frame (v) MS box hinge , stay, latch, handle , tower bolt and flat iron as per drawing. ( vi) flat iron for hold fast and fillets fixing wire mesh (vii) All sections shall be made of CRLCS sheet, outer frame of size shall be 115mmX40mm ( 1.25mm thick) , mullion/transoms shall be of size 115mmX50mm ( 1.25mm thick) and size/shape of all sections shall be as shown on drawing. ( viii) shutter frame ( outer) shall be of size 50mmX23mm ( 1.00mm thick) and shutter frame ( centre/middle) shall be of size 50mmX23mm ( 1.00mm thick) and rest all as specified and shown on drawing No. CESZ/2015/TD/019 sheet No. 1R/3, 2R/3 and 3R/3.Centre/middle)complete one shop coat of anticorrosive paint all as specified and directed.Note : TD drawing referred in the item is not attached alongwith tender documents. Contractor are deemed to be in possession of all standard drawings amended upto date as issued by Chief Engineer Shillong Zone , Shillong . Te drawing however be referred to this office during working hours. No claim whatsoever shall be admissible to the contractor on account of any misunderstanding if any on this account.

S & F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with out sash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and as directed.

S & F in repair 50 mm size stainless steel butt hinges, complete all as specified and as directed.

S & F in repair 75 mm size stainless steel butt hinges, complete all as specified and as directed.

S & F in repair 100 mm size stainless steel butt hinges, complete all as specified and as directed.

S & Fin repair 100 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed..

S & Fin repair 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&Fin repair 100 mm long extruded aluminium alloy handles, febricated type anodised complete all as specified and as directed.

S&F in repair150 mm long extruded aluminium alloy handles, febricated type anodised complete all as specified and as directed.

S&F in repair aluminium door seal complete all as specified and as directed.

S&Fin repair 300mm mild steel sliding door bolts, plate type stove enamelled black, with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S & Fin repair 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

S&Fin repair 125 mm long aluminium anodised safety type hasp and staple with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F in repair100 mm long aluminium anodised safety type hasp and staple with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F in repair steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified and as directed.

S&Fin repair Aluminium body ( extruded section) Door closure hydraulically regulated designation no.3 universal type suitable for door shutters of 851to 1000mm in width and weight between 61 to 80 Kg and fixed complete all as specified and directed.

M&L in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminiun alloy sheet foundation box , main body with stainless steel cover governing pivot made of brass , other parts made of mild steel heavy duty complete all as specified and directed .

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M & L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound (@ 3% by weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately as "Supply only".

Supply only Integral water proofing compound ISI marked complete all as specified and as directed.

M&L for rendering 5mm thick in cement mortar (1:3) on fair faces of RCC concrete surfaces and including applying cement slurry in bottom of slab, chajjas, fin, facias etc. complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old wooden surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old steel surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall applying 1mm thick wall care putty on plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.

M&L complete removal of existing treatment of plastered surfaces of wall applying wall care putty of 1mm thick average thickness and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.

M & L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed.

M&L Preparing surfaces of wood and wood based materials,steel/metal surface of any description and girth not other wise described and treating small articles such as ends of posts, backs of chowkats,with tar or coal tar black paint etc,area tarred exceeding 0.1 sqm but not exceeding 0.5 sqm each complete all as specified & as directed.

M&L Preparing surfaces of wood and wood based materials,steel/metal surface of any description and girth not other wise described and treating small articles such as ends of posts, backs of chowkats,with tar or coal tar black paint etc,area tarred not exceeding 0.1 sqm each complete all as specified & as directed.

Hacking out old broken glass (any thickness, quality or description) from wooden frame or metal frame or aluminium frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 3mm thick figured glass pin headed type side and glazing with oil putty in squares not exc 0.5 sq.m in each pane complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.

M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M & L for glazed ceramic coloured tiles 375x250x7mm/300x200x7mm /450X350X7mm thick, set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps etc over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

M & L pre-polished cement concrete chequered tiles area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm and 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6) including demolition of old slabs and tiles complete all as specified and directed.

Demolition of stone slabs and tiles of any description and thickness in floors, approns etc. complete all as specified and directed.

M&L for 20mm thick granite ( any type) machine cut ,as in steps, jambs, pillars, window cills, cookong platforms and the like laid over cement screed of 15mm thick in CM 1:4 including pointing in white cement 1:2 using marble dust with admixtures of pigments match the shade of granite stone including rubbing and polishing complete all as specified and as directed.

M&L for 18 to 20mm thick marble ( table rubbed and polished) machine cut ,as in steps, jambs, pillars, window cills, cookong platforms and the like laid over cement screed of 15mm thick in CM 1:4 including pointing in white cement 1:2 using marble dust with admixtures of pigments match the shade of marble including rubbing and polishing complete all as specified and as directed.

Taking up or down 15 mm bore GI tubing from trenches / wall including all fittings segregated, cleaning and stacking the pipe for reuse at site if required complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate.

S&F GI tubing15 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Refixing only old serviceable 15 mm bore Steel tubing and connections as obtained from taking up/down old steel tubing including provision of new fittings in new or old position to walls,ceiling, flooring etc. complete all as specified and as directed.

Taking up or down 20 mm bore GI tubing from trenches / wall including all fittings segregated, cleaning and stacking the pipe for reuse at site if required complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate

S & F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Refixing only old serviceable 15 mm bore Steel tubing and connections as obtained from taking up/down old steel tubing including provision of new fittings in new or old position to walls,ceiling, flooring etc. complete all as specified and as directed.

M & L for 3- layer PP-R (Polypropylene random copolymer) pipes 15 mm dia outer dia ,SDR 7.4 (PN-16) pipes UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including fittings PP-R plain & brass threaded type polypropylene random laid in trenches including taking out the old existing pipes of any type complete all as specified and directed.

M & L for 3- layer PP-R (Polypropylene random copolymer) pipes 20 mm dia outer dia ,SDR 7.4 (PN-16) pipes UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including fittings PP-R plain & brass threaded type polypropylene random laid in trenches including taking out the old existing pipes of any type complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends of any radius with access door complete all as specified and directed.

S&F 75 mm dia PVC (SWR) bends of any radius with with duck foot or heel rest fitted with oval access door complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks of capacity upto 1000 litres and from mouth of circulating pipes and writing the date of cleaning on water tank with white paint complete all as specified and as directed.

S&F in repairs, bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, PTMT bib taps 15mm dia standard any colour screwed doen for iron pipe and fixed (minimum weight 90gms) complete all as specified and directed.

S&F in repair 15mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs, stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F in repair, 15mm bore dia of concealed stop valves cast copper alloy fancy type chromium plated with long shank and cup complete all as specified and as directed.

S&F in repair 20mm bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe etc complete all as specified and as directed.

S&F in repair brass chromium plated toilet paper holder fixed with chromium plated brass screws and plastic cleats complete all as specified and as directed.

S & F in repairs,0.56mm thick plain aluminium sheeting alloy 31000H4 for repair of door in lower portion complete all as specified and as directed.

S&F in repair soap dish chromium plated fixed to wall with chromium plated brass screws and plastic cleats complete all as specified and as directed.

S & F in repairs, round moulded PVC water tank lid for 500&1000 litres tank complete all as specified and as directed.

S&F in repair glass shelf of size 450mmX150mm with chromium plated guard rail below mirror for keeping soap box complete all as specified and as directed Make Paryag Cat no. BEA-47 or equivalent as approved

S & F in repairs, 125 mm, dia chromium plated, swivel type shower rose with 190 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipe complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as directed.

S&F in repair, floor dooor stopper of aluminium alloy body and tounge, overall length of cover plate 100mm anodised with hard drawn steel spring fixed in floors complete all as specified and as directed.

S&F in repair, brass chromium plated tubular towel rail of 20mm dia and 60cm in length, D shaped, with brass chromium plated brackets complete all as specified and as directed.

S&F in repair, 5mm central hole basin mixer with fittings complete all as specified and as directed.

S&F in repair 20mm dia aluminium anodised tubular curtain rod fancy type complete all as specified and as directed

S&F in repair aluminium anodised brackets for curtain rod fancy type complete all as specified and as directed

S&F 15mm dia ball brass valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified & as directed.

S&F 20mm dia ball brass valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified & as directed.

S&F rotational moulded polyethylene water storage tank 500 litre capacity of triple layered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule ncluding dismantling of old tank of any description complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank 1000 litre capacity of triple layered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule ncluding dismantling of old tank of any description complete all as specified and directed.

S&F in repair Waste coupling 32mm dia of PTMT (half or full threaded) Minimum weight 45 gms complete all as specified and directed.

S&F in repair Waste coupling 40mm dia of PTMT (half or full threaded) suitable for urinals Minimum weight 60 gms complete all as specified and directed.

S&F in repairs,grating doom 125m dia with waste hole of PTMT ( Minimum weight 25 gms) complete all as specified and as directed.

S & F in repairs, chromium plated jet spray higenic spray set with 15mm dia 1.00m long acrylic tube complete all as specified and as directed.

S & F in repairs, sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

S & F in repairs, stainless steel kitchen rack made of 0.63mm thick stainless steel sheet of size,600mmX900mmX250mm fixed to wall with screws complete all as specified and as directed.

S & F in repairs, chromium plated wall mixer three in one system for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S & F in repairs, chromium plated waste coupling 32mm (half or full thread) complete all as specified and as directed.

S & F in repairs, Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.

S&F in repair PVC waste pipe of size 40mm dia for sink complete all as specified and directed.

S&F in repair PVC waste pipe of size 32mm dia for wash hand basin complete all as specified and directed.

S&F in repair plastic water closet seat, white, closed pattern with flat bottom and cover with mild steel chromium plated or aluminium hinging device complete all as specified & as directed.

S & F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

S & F in repairs, PVC connections 15mm dia with PTMT nuts of length 600mm complete all as specified and as directed.

S & F in repairs, PVC connections 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed.

PK ENGINEERING

M/S MANOJ PAUL

LAXMI CONSTRUCTION