08/EUDC (Chowk)/LESA/2025-26

Amount

Safe carriage, loading-unloading with proper stacking of following material from ESC-Daliganj to Work Site/JE -Dump Store -

11/0.4 KV 250 KVA T/F

LT PVC 1X400 SQ MM CABLE

11KV 3X185 SQ MM XLPE CABLE

11KV O/DOOR Jointing Kit

ST POLE 09 MT LONG

Cable LT ABC (3x120+1x95+1x35)Sqmm

Safe carriage loading unloading with proper stacking of following material from JE dump store to work site.

11/0.4 KV 250 KVA T/F

LT PVC 1X400 SQ MM CABLE

11KV 3X185 SQ MM XLPE CABLE

11KV O/DOOR Jointing Kit

ST POLE 09 MT LONG

Cable LT ABC (3x120+1x95+1x35)Sqmm

Fabrication & erection of S/S type double pole for 11KV line on 09/11 M long ST pole with fixing of necessary clamps & other acessories like 1 no. top channel 100×50 mm,2 no.MS angle 65x65x6mm,danger board,number plate,barbed wire,TPMO set & D.O.fuse set.

Stringing,Sagging,winding and jumpering of LT line with AB Cable (3x120+1x95+1x35) conductor as per RESSPO Norms.(AB Cable provided by deptt and balance material like holding clamp, eye hook, suspension clamp and dead end clamp arranged by contractor .)

Hoisting of 11KV XLPE cable3x185 sq mm

Chemical Earthing system with outer pipe diameter 50mm, inner Strip 40x6, length 3000 mm. galvanization up to 200 micro, earthing pipe with crystalline conductive mixture filled inside the pipe with anti-corrosion & high conductive along with 50 Kg(As per required) of BFC which should be capable to reducing the soil resistively with good moisture retaining capacity.(Specification of chemical earthing and drawing is hereby enclosed). All material shall by supply by the contractor.

Construction of plinth for 250 KVA Transformer

Placement of 11/0.4 KV T/Fs from dump place to newly constructed T/Fs plinth & installation, commissioning of 250 KVA T/Fs of T/F Plinth and including jumpering with the system (All the required matrial for above job shall be provided by contractor except T/Fs)

Fencing for 250 Kva Transformer

Providing earthing strip size 50x6mm and connecting from earthing pipe/m.s.earting rod to fuse unit/tronsformer body/neutral earthing(Earthing rod & earthing strip arranged by contractor).

Construction of Distribution Pillar box made of MS Sheet (All the material will be arranged by the contractor).

Hoisting, winding and jumpering of LT cable size 1x400 sqmm between LT distribution box/fuse unit & constructed overhead line with proper lugging and clamaping

Construction of pole plinth.

Fixing of earth rod as per norms. (All Materials provided by contractor Except Earth Rod)

Grouting of pole

Painting of new erected pole

Supply & Fixing of CU L-Piece

Supply of copper stripe of size 50x50x6 mm

Suppy & fixing of henless fuse unit 500 amp 650 volts

Fixing of earth rod as per norms. For earthing support of old existing poles of LT/HT & 33kv lines including 6 SWG GI/Earth wire . (All Materials provided by contractor)

SIDDHI ENTERPRISES (BID ID -5210896)

P.S. ENTERPRISES (BID ID -5208981)